Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Supplier

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the provision of specialized packaging materials and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of electrical assemblies to ensure they are fully prepared for FOB Origin shipment. This includes executing Preservation Method 10 and Cleaning/Drying 1 using industrial marking equipment and MIL-SPEC wrap materials. Compliance is strictly governed by military standards, requiring all packaging to meet MIL-STD-2073-1E and all marking to adhere to MIL-STD-129. The performance of these services will take place in San Diego, California. Interested parties should note the response deadline of November 13, 2026, for this opportunity categorized under NAICS code 488510.

General Info

Packaging and marking electrical assemblies for DoD in San Diego by November 13, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9705.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized packaging materials and performs marking services for prime contractors on DLA Weapons Support ASC projects. Packages electrical assemblies per MIL-STD-2073-1E and marks items per MIL-STD-129. Executes Preservation Method 10 and Cleaning/Drying 1 using industrial marking equipment and MIL-SPEC wrap materials. Delivers fully packaged and marked assemblies ready for FOB Origin shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging, preservation, and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the packaging of three units in strict accordance with MIL-STD-2073-1E using preservation material 49 and wrap material GB, with labeling performed per MIL-STD-129. The project is designated as a FOB Origin shipment destined for DLA Distribution DDSP New Cumberland. Interested parties should note the response deadline of November 16, 2026, and the associated NAICS code 488510 for these specialized logistics and packaging services.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

First Destination Transportation (FDT) Freight ServicesThe First Destination Transportation Freight Services subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the transportation of fluid handling hardware for prime contractors. The selected provider is responsible for coordinating pickups from suppliers on an FOB Origin basis and managing the entire transit process to the final government destination. Key operational requirements include the mandatory use of U.S.-flag vessels for all ocean transport and the provision of comprehensive freight documentation, specifically detailing the gross weight and port of loading. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 488510.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of non-hazardous materials according to ASTM D3951 and the marking of all packaging in compliance with MIL-STD-129. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements and ensure all hazardous materials meet TQ Requirement IP025. The final deliverables must be shipment ready for FOB Origin transport to the DDSP in New Cumberland. This effort falls under NAICS code 488510 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Labeling

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Temperature-Controlled International Medical FreightThis subcontract for Temperature-Controlled International Medical Freight involves the transport and delivery of temperature-sensitive medical supplies for prime contractors supporting DLA Troop Support Medical Supply Chain Pharm FSA projects. The scope of work requires hauling materials FOB Destination to the USA Med Mat Ctr EUR located in Kaiserslautern, Germany. To ensure product integrity, the contractor must utilize cold chain logistics to maintain a USP controlled room temperature between 20 and 25 degrees Celsius. Compliance with strict packaging and labeling standards is mandatory, specifically adhering to MIL-STD-2073-1E and Medical Marking Standard No. 1. The contractor is responsible for ensuring all products are delivered in the required condition. This opportunity falls under NAICS code 488510 and is managed by the Department of Defense.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Secure Shipping ServicesThis subcontract involves the provision of specialized packaging, marking, and shipping services for prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the secure delivery of 16 units to a designated inspection point in New Cumberland, Pennsylvania. All services must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. To ensure security, the contractor must implement Protected Cargo protocols by omitting nomenclature from all containers. Preservation materials must be applied in accordance with QUP:001 and PRES MTHD:41. This requirement falls under NAICS code 488510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The scope of work focuses on the handling of sensitive electronic components, requiring strict adherence to MIL-STD-2073-1E and MIL-DTL-19491 for packaging, and MIL-STD-129 and IPC/JEDEC J-STD-609 for marking. All shipments must utilize approved MIL-SPEC preservation and cushioning materials to ensure components are fully prepared for delivery to DLA Distribution Warner Robins. The project is categorized under NAICS code 488510 and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 6, 2026. The primary objective is to deliver fully compliant, ready-to-ship packages that meet all rigorous military specifications for sensitive electronic hardware.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for electronic components, specifically resistors, to support the DLA Weapons Support Active Devices Division. The contractor is responsible for ensuring all deliverables are shipping-ready and fully compliant with strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. These tasks require the use of specialized MIL-SPEC materials and equipment to meet Department of Defense requirements. The final products are to be delivered to the Aviation Support Detachment located in Fort Worth, Texas. This opportunity falls under NAICS code 488510 and is managed through the DLA Weapons Support Active Devices Division. Interested parties should note the response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract opportunity, titled MIL-SPEC Packaging and Freight Services, involves providing specialized military-grade packaging, marking, and shipping for electronic equipment, specifically keyboards, for prime contractors on DLA Troop Support projects. The selected provider must ensure all items are packaged according to MIL-STD-2073-1E and marked per MIL-STD-129, utilizing government or wing tip pallets for secure transport. Responsibilities include coordinating FOB Origin shipping to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The project is issued by the Department of Defense under NAICS code 488510 and is designated as a Total Small Business Set-Aside. Interested parties must submit their responses by November 16, 2026. Performance of the contract will take place in New Cumberland, Pennsylvania.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support Land Supplier Operations Engines projects. The scope of work involves specialized packaging, marking, and shipping of hardware in strict accordance with MIL-STD-129 and DLA requirement RP001. Additionally, the contractor must apply TQ requirement IP025 and FED-STD-313 for the handling of hazardous materials, utilizing approved MIL-SPEC packaging materials and Hazmat containment systems. All completed shipments are to be delivered FOB Origin to DLA Distribution in Barstow, California. The opportunity falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties must note the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging and marking of 157 flat washers, ensuring strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. Specific technical requirements include the implementation of packaging data QUP:005, PRES MTHD:10, and CLNG/DRY:1, utilizing military-grade preservatives and labeling equipment while strictly prohibiting the use of mercury compounds in any materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Tracy, California. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026. The contract is categorized under NAICS code 488510.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Plain Cap Nuts (NSN 5310-01-3490759)This subcontract involves the manufacture or procurement of 2,757 plain cap nuts under NSN 5310-01-3490759 for prime contractors supporting Department of Defense projects. These components are designated as Critical Application Items and must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed by the DLA Weapons Support ASC Commodities Division with performance located in Texarkana. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Self-Locking Nuts (NAS1758)

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 8 hours ago

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

POSTED

about 8 hours ago

DEADLINE

Supply of Socket Head Cap Screws

Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military Preservation and Packaging Services

Couriers and Express Delivery Services

POSTED

about 8 hours ago

DEADLINE

Annular Ball Bearing Manufacturing and Supply

Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Defense Packaging and First Destination Transportation (FDT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Aerospace Packaging and Logistics

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization for Defense Components

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Logistics Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Freight Forwarder (Military FPO Delivery)

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 8 hours ago

DEADLINE

Defense Packaging and Palletization Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

Packaging and Marking Services for DLA Aerospace Components

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Hazardous Materials Handling

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 8 hours ago

DEADLINE

Military Packaging and Marking Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS