Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Preservation Services

Active

Federal

Response Deadline09/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-23LB.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL, ANNULAR

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preservation, packaging, packing, and marking for precision bearings for prime contractors on DLA supply contracts. Executes preservation and packing in strict accordance with MIL-DTL-197M and marks packages per military standards. Requires a packaging facility adhering to quality assurance verification per Section 4 of MIL-DTL-197M. Delivers 67 units of bearings preserved and packed for shipment.

Similar Contracts

Same NAICS industry code

Supply of Vehicular Clutch Sliding Sleeves (NSN 2520124215603)

DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

3HD 3040 017330673 D5, SHAFT

Solicitation # N00104-26-Q-FD63

This solicitation, numbered N00104-26-Q-FD63, seeks the procurement of six shafts identified by NSN 3HD 3040-01-733-0673 D5 for use in a crucial shipboard system, with performance required at Mechanicsburg, Pennsylvania. The contract is a total small business set-aside under FAR 19.5, restricted to small businesses meeting the NAICS code 333613, and requires full compliance with Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including priority rating for national defense, hazardous material identification, trade agreements, electronic payment submission via WAWF, and restrictions on specialty metals in bearings. The shafts must be manufactured to precise form, fit, function, reliability, and safety standards, with material designated as Special Emphasis Level I, demanding rigorous quality assurance under ISO-9001 or MIL-I-45208, and calibration to ISO-10012, ANSI-Z540.3 with ISO-17025, or MIL-STD-45662. Packaging and marking must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, with traceability encoded per MIL-STD-792, and ESD-sensitive components protected per ANSI/ESD S20.20-2021. All shipments require WAWF electronic invoicing and receiving reports using specified DoDAACs, with payment instructions governed by DFARS clauses. Delivery is due within 200 days under FOB Destination terms, and no material may be shipped without prior formal acceptance. All offerings must include detailed past performance data, as award will be made based on a best-value determination prioritizing past performance over price. Compliance with NIST SP 800-171 for cybersecurity and FedRAMP Moderate baseline for cloud services is mandatory, and contractors must maintain configuration control of proprietary designs, submitting latest electronic drawings in C4 format. A certificate of compliance for special emphasis material, 100% inspection of material certifications, traceability, and NDT reports, along with zero-defect lot acceptance criteria, are strictly enforced. The contracting officer must approve all waivers or deviations, and the offeror must affirmatively declare eligibility, maintain active SAM registration, and certify compliance with defense-specific representations including

Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

CLUTCH,SLIDING SLEEVE,VEHICULAR

Solicitation # 7017696671

DLA Land and Maritime is seeking sources for a one-time purchase of 236 vehicular sliding sleeve clutches, identified by NSN 2520124215603. The approved manufacturer is ZF Friedrichshafen AG with part number 4474 327 044. Because the agency lacks technical data for this item, interested parties wishing to become approved sources must provide documentation as required by DLA Procurement Notes L04 and M06. This sources-sought opportunity, solicitation number 7017696671, falls under NAICS code 333613. Interested vendors must complete a market survey and submit it to the primary point of contact, Jennifer Cummins, by the response deadline of September 14, 2026.

DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

WORM GEAR REDUCER

Solicitation # 5400030168

The South Carolina Department of Corrections is seeking a provider for a worm gear reducer under solicitation number 5400030168. This SLED organization opportunity is open for responses until September 17, 2026, at 2:00 PM. The place of performance for this contract is located within the state of South Carolina. Interested parties can contact Chad Byrd as the primary point of contact via email at byrd.chad@doc.sc.gov or by phone at 803-896-1383 for further details.

Department Of Corrections

POSTED

DEADLINE

International Freight Forwarding to Germany (APO)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MIL-SPEC Packaging for Bare Metal Components

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization Services

C AND T SUPPLY CHAIN

POSTED

DEADLINE

CONNECTING LINK, RIGID

Solicitation # SPE4A5-26-T-404Z

This solicitation, number SPE4A5-26-T-404Z, is for the procurement of 93 rigid connecting links (NSN 3040-00-295-0738) with a delivery requirement of 170 days after order. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must certify that they will not provide covered telecommunications equipment or services. The contract requires strict adherence to domestic material restrictions, including the Berry Amendment and the Buy American Act, with specific disclosure requirements for non-domestic materials. Prospective bidders must provide details of current dealer or distributor certifications and are prohibited from using additive manufacturing unless specifically authorized. Additionally, all DLA contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Small business joint ventures must submit specific representations and certifications as required by FAR and DFARS regulations. Quotes are due by September 11, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

HOUSING, MECHANICAL

Solicitation # SPE7L1-26-T-07B7

This solicitation, identified as SPE7L1-26-T-07B7, is issued by the Department of Defense Land Supply Chain for the procurement of one mechanical housing, part number 3040-01-723-8987. The contract is open for full and open competition with a delivery requirement of 20 days after receipt of order. Performance is centered in Mechanicsburg, Pennsylvania, and the response deadline is set for September 14, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the prohibition of Class I ozone-depleting chemicals. Significant security and compliance obligations are in place, including CMMC Level 2 certification, the protection of covered defense information, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.

LAND SUPPLY CHAIN

POSTED

DEADLINE

LEVER ASSEMBLY, MANU

Solicitation # SPE7L3-26-T-225R

This contract is for the procurement of one Lever Assembly, identified by NSN 3040016547028 and Huntington Ingalls Inc part number 15892733. The order is issued under solicitation SPE7L3-26-T-225R by the Department of Defense Land Supplier Operations Vehicle Support. Delivery is required within five days after the order, with a final required delivery date of February 26, 2026. The item is to be delivered FOB Destination to the USS Gerald R Ford CVN 78. The supplier must adhere to DLA packaging requirements and MIL-STD-129 marking standards. Technical and quality requirements are governed by the DLA Master List, and the contract strictly prohibits the use of Class I ozone-depleting chemicals. Inspection and acceptance will take place at the destination, and the quantity variance is set at plus or minus 0 percent.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-392C

Solicitation SPE4A5-26-T-392C, issued by the DLA Aviation ASC Supplier Oper OEM Division, is for the procurement of five bell cranks, identified by NSN 3040011444387 and part number 65861-04176-041. This critical application item is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania by March 5, 2027. The contract specifies a delivery lead time of 182 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The procurement is subject to rigorous technical and quality standards, including the DLA Master List of Technical and Quality Requirements and CMMC Level 2 Self-Assessment. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific palletization requirements under RP001. For quality assurance, an alternate sampling plan from Sikorsky Corporation (CAGE 78286) is acceptable if it meets ASQ H1331 or MIL-STD-1916 standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

SHAFT, STRAIGHT

Solicitation # SPE7L1-26-T-06Y4

This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-06Y4, is for the procurement of two straight shafts identified by NSN 3040-00-081-9972. The contract requires delivery within 20 days after the order is received and falls under NAICS code 333613. The agreement is subject to specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. Notably, the technical data associated with this item is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Solicitation # SPE4A6-26-R-XD60

This solicitation, identified as SPE4A6-26-R-XD60 and issued by the Department of Defense ASC Commodities Division, seeks quotations for ten units of a wiring harness, NSN 5995-01-680-2478, part number 070647-0001 from Leonardo US Cyber and Security. The requirement is for a critical application item identified as a commercial product with no shelf life requirement. The contract will be awarded as a firm fixed price bilateral indefinite delivery purchase order with a total ceiling of 350,000 dollars over a five-year base period. Delivery is required within 118 days after order, with FOB origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Specific technical and quality requirements include the removal of government identification from non-accepted supplies per RQ011 and physical identification per RQ017. Surplus materials are explicitly deemed unacceptable for this national stock number. All submissions must be uploaded via DIBBS by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-26-R-XD59

This solicitation, identified as SPE4A6-26-R-XD59 and issued by the Department of Defense ASC Commodities Division, is for the procurement of electrical insulation sleeving under NSN 5970-01-508-5746. The requirement is for 17 rolls, with each roll consisting of 50 feet, specifically referencing Whitmor Plastic Wire and Cable Corp part number WZ102. This is a critical application item provided under a firm fixed price agreement with a delivery schedule of 150 days after receipt of order. The contract allows for no quantity variance and specifies that both the inspection and acceptance points are at the destination, with shipping terms set as FOB Origin. The procurement adheres to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. Sampling and quality assurance must comply with MIL-STD-1916 or ASQ H1331, utilizing specific verification levels for critical, major, and minor attributes. The solicitation was posted on September 4, 2026, with a response deadline of September 22, 2026. It is structured as an unrestricted solicitation for a bilateral award that may include a five-year base period with a total value cap of 350,000 dollars.

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-R-XD62

This solicitation, identified as SPE4A6-26-R-XD62, is issued by the Department of Defense ASC Commodities Division for the procurement of 300 units of backup lights under NSN 6220-01-375-3530. The contract is a total small business set-aside and is intended to result in a bilateral indefinite delivery purchase order with a five-year base period and an aggregate value up to 350,000 dollars. The pricing is based on a firm fixed price with a delivery requirement of 190 days after order. The contract mandates strict adherence to various DLA technical and quality requirements, including ISO 9001:2015 standards, specific packaging and marking protocols per MIL-STD-129 and MIL-STD-2073-1E, and the use of qualified products lists. It specifies a prohibition on the intentional addition of mercury, except where functionally required and contained. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The technical data package is based on Revision B Generation 2, referencing multiple specific drawings and revisions.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # SPE4A6-26-R-XD48

Solicitation SPE4A6-26-R-XD48, issued by the Department of Defense ASC Commodities Division on September 4, 2026, seeks quotes for 143 electrical power cable assemblies under NSN 6150-01-390-7058. This is a total small business set-aside under NAICS code 335931, structured as a bilateral award with an indefinite delivery purchase order for stock buys over a five year base period. The required delivery timeframe is 345 days after the order is placed. The contract contains strict export control requirements under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification who have completed the required training and questionnaires. All shipments must adhere to DLA packaging requirements RP001.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-0275

This is a sole source set-aside for an SBA Certified Women-Owned Small Business to establish an Indefinite Quantity Contract for a specific cable assembly used in F-15 Eagle aircraft. The contract consists of a five-year base period with no additional options, featuring an estimated annual demand of 16 units and a required delivery timeframe of 313 days to facilities within the Continental United States. Only vendors proposing the approved sources of supply, Safran Electrical Components USA, Inc. or Jo-Kell Inc., will be considered. Due to the critical nature of the application, the item is subject to strict export controls under ITAR and EAR regulations. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be authorized by the DLA controlling authority to access technical data. The procurement process may involve a reverse auction, and proposals must be submitted to the bid custodian rather than through the DIBBS system.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD57

Contract SPE4A6-26-R-XD57 is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 10 special purpose electrical cable assemblies, identified by NSN 5995-01-530-3551 and Caton Connector Corporation part number 2CA30982-2L6. This firm fixed price acquisition is structured as a bilateral indefinite delivery purchase order for stock buys with a base period of five years and an aggregate contract value up to 350,000 dollars. Delivery is required within 95 days after order, with inspection and acceptance occurring at the destination and shipping handled as FOB origin. The contract mandates strict adherence to various technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware and packaging, except where specifically allowed for functional components like batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XD14

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XD14, is for the procurement of 21 units of a special purpose branched electrical cable assembly, identified by NSN 6150-01-633-1590. The requirement is a total small business set-aside and will result in a bilateral indefinite delivery purchase order for stock buys with a five-year base period and an aggregate ceiling of 350,000 dollars. Delivery is required within 90 days after receipt of order. Due to the nature of the technical data, this contract is subject to strict export controls under the International Traffic in Arms Regulations and the Export Administration Regulations, as well as DFARS 252.225-7048. Access to this technical data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Interested parties must be registered in SAM and submit quotations by the deadline of September 22, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

MANIFOLD, PNEUMATIC SENSOR

Solicitation # SPE4A6-26-R-0294

This procurement solicitation is for the acquisition of 79 pneumatic manifolds intended for use in F-16 aircraft, identified by NSN 6610-011491465. The requirement is restricted to approved original equipment manufacturers Rosemount Aerospace Inc. and Honeywell International, Inc. This is an unrestricted procurement where the government intends to negotiate with these specific approved sources. The contract includes a mandatory Government First Article Test, with a production delivery schedule of 417 days after receipt of order. Terms of delivery are FOB Origin, and inspection and acceptance will also occur at the origin. The solicitation is expected to be issued on or about September 2, 2026, with a response deadline of October 2, 2026. Interested parties may submit proposals or express interest and capability within forty-five days of publication. Because the items involve restricted data, contractors must be certified by the DoD to access unclassified data via DD Form 2345. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Interested vendors can access the full solicitation through the DLA Internet Bid Board Systems.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month

CABLE AND CONDUIT ASSEMBLY, ELECTRICAL

Solicitation # SPE4A6-26-R-XD58

This contract solicitation, identified as SPE4A6-26-R-XD58 and issued by the Department of Defense ASC Commodities Division, is for the procurement of ten electrical cable and conduit assemblies, specifically NSN 6150-01-475-7629 and Robertson Fuel Systems part number HM022-100-21. The requirement is for a critical application item under a firm fixed price agreement with a delivery timeline of 500 days after order. The procurement is intended to result in a bilateral indefinite delivery purchase order with a five year base period and an aggregate contract ceiling of 350,000 dollars. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standards MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Inspection and acceptance will occur at the destination, while the shipping terms are FOB origin. Technical and quality requirements are governed by the DLA Master List, including specific provisions for the removal of government identification from non-accepted supplies and physical item marking.

Other Communication and Energy Wire Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Annular Ball Bearings (P/N 365384-1)

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306004278710)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305016916726)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 2,000 Socket Head Cap Screws conforming to NSN 5305016916726 specifications. The selected provider is responsible for manufacturing or sourcing the screws, ensuring physical identification and bare item marking comply with RQ017 standards, and adhering to RQ001 DLA Packaging Requirements for Procurement. The contract falls under NAICS code 332722 and specifies a place of performance in Fort Worth, Texas. Interested parties must respond by September 11, 2026, to provide the properly marked and packaged units for DLA delivery.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE