Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Marking Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging and marking services for O-rings in strict compliance with U.S. military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. These standards ensure that all components are properly protected, labeled, and documented for storage, transportation, and use within Department of Defense supply chains. The work is to be performed at Fort Irwin, California, with a zip code of 92310-9986, and falls under NAICS code 323113, indicating it is related to printing and related support activities. This is a subcontract opportunity posted by the Land Supply Chain under the Department of Defense, with responses due by August 6, 2026. All subcontractors must meet exacting military requirements for material handling, labeling accuracy, and documentation to support operational readiness and traceability.

General Info

Packaging and marking O-rings per MIL-STD-2073-1E and MIL-STD-129 at Fort Irwin, CA, by August 6, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

FORT IRWIN, CA, 92310-9986, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging and marking services for O-rings per military standards including MIL-STD-2073-1E and MIL-STD-129.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and boxing services for maintenance kits in full compliance with MIL-STD-2073-1, Appendix D, mandating strict adherence to military standards for material selection, cushioning, and securement to eliminate any movement during transit. The work involves selecting appropriate protective materials and ensuring all components are effectively preserved and enclosed to withstand the rigors of military shipment environments, with a focus on long-term integrity and readiness. All activities must meet the exacting requirements for environmental protection, labeling, and handling as defined by the standard. The contract is issued under the NAICS code 323113 as a subcontract by the Department of Defense through its Maritime Supply Chain division, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. Proposals must be submitted by August 6, 2026, following the posted solicitation date of July 26, 2026. The offeror must demonstrate full capability to execute the work under military packaging protocols without exception, and all deliverables must be prepared to support secure, reliable logistics operations for defense-related maintenance kits.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

ESD/EMI Protective Packaging and Assembly ServicesThe contract requires the provision of military-compliant ESD-safe packaging, unitization, and handling services for memory microcircuits, ensuring full protection of sensitive components through form-fitting containers, specialized barrier materials, and adequate cushioning designed to prevent electrostatic discharge and electromagnetic interference damage. All packaging and handling procedures must meet stringent defense standards to safeguard the integrity of the microcircuits during transportation and storage, with particular emphasis on lead protection and environmental resilience. The work is to be performed at the designated place of performance in Columbus, Ohio, under the oversight of the Active Devices Division within the Department of Defense. This is a subcontract opportunity with a NAICS code of 323113, posted on July 26, 2026, and requiring responses no later than August 6, 2026. The solicitation is open to qualified subcontractors capable of delivering packaging solutions that comply with military specifications for static control and EMI shielding, though no set-aside provisions or specific organizational eligibility criteria are indicated. The contract does not include details on pricing, volume, or term length, and the point of contact information is not provided in the发布的 data; interested parties must refer to the official DIBBS portal via the provided link for further submission instructions and technical requirements.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-specification packaging solutions that include electrostatic discharge and electromagnetic interference protection, along with preservation using Method Code GX to ensure long-term readiness and integrity of sensitive components. All packaging and labeling must strictly adhere to MIL-STD-129 for marking requirements and J-STD-609 for soldering and surface mount technology labeling standards, ensuring full compliance with Department of Defense protocols. The work is classified as a subcontract under NAICS code 323113 and is being managed by the Active Devices Division within the Department of Defense, with performance expected to occur in Columbus, Ohio, 43213. Interested parties must submit responses by August 6, 2026, following the solicitation posted on July 26, 2026, through the DIBBS platform.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Packaging and Marking Compliance (MIL-STD-129)The contract requires the production and application of compliant markings and labels for military shipments in strict accordance with MIL-STD-129 standards. This includes accurately incorporating essential identifiers such as NSN, CLIN, and QUP data along with compliant Data Matrix barcodes to ensure proper tracking and logistics handling across defense supply chains. All labeling must meet exacting government specifications for legibility, placement, and durability to support seamless movement of materiel through military logistics networks. The contract is classified as a subcontract under NAICS code 323113 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 26, 2026, and the response deadline is set for August 3, 2026. Failure to adhere to MIL-STD-129 requirements will result in non-compliance, potentially leading to rejection of shipments and contract penalties.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging, labeling, and UID marking services for flat washers that strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, ensuring full compliance with Department of Defense logistics requirements. All items must be properly barcoded and container-labeled to support traceability, inventory management, and receipt verification across the military supply chain. The work must include accurate UID marking on individual components and corresponding documentation that aligns with DoD mandates for asset identification and data reporting. Performance is scheduled to support operations at Tinker Air Force Base with a zip code of 73145-8000, under a subcontract arrangement governed by the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and falls under NAICS code 323113 for printing and related support activities. Contractors must be prepared to meet exacting military specifications without exception, ensuring that packaging and marking systems are fully functional, durable, and interoperable within existing DoD logistics infrastructure.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Medical Packaging and Marking ServicesThe contract requires the packaging and labeling of chemical reagents in strict compliance with Medical Marking Standard No. 1, ensuring durable, legible labeling and commercial exterior packaging designed for safe, low-cost transportation. All work must meet defined standards for durability and regulatory alignment to support the secure handling and delivery of sensitive medical supplies. The place of performance is designated as APO 09227-0000, indicating operations are intended for military or overseas medical logistics channels. This is a subcontract under the Department of Defense’s Medical Supply Chain FSH, with eligibility restricted by the NAICS code 323113, which pertains to commercial printing services. The solicitation was posted on July 26, 2026, and responses must be submitted by August 3, 2026, providing a narrow window for qualification and proposal submission.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Packaging and Labeling ServicesThe contract entails the packaging of surgical sutures into sealed unit containers and shipping units that must meet strict military and medical standards including MIL-STD-129 for labeling, ASTM D3951 for packaging requirements, and medical marking protocols to guarantee sterility, traceability, and compliance throughout the supply chain. All work must be performed to ensure that each suture unit is properly labeled, protected, and documented to maintain integrity from packaging through delivery. The place of performance is designated as Groton, Connecticut with the ZIP code 06340-4905, indicating the physical location where the packaging operations must be carried out. This is a subcontract opportunity under the NAICS code 323113, which corresponds to medical and surgical instrument manufacturing, and is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, providing a seven-day window for interested parties to submit proposals. All submissions must adhere to the specified technical and regulatory frameworks to qualify, and the contract is targeted toward vendors capable of delivering high-precision, sterile packaging solutions under defense and healthcare compliance standards. The full details can be accessed through the provided DIBBS link.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Blister Pack and Secondary Packaging ServicesThe contract involves the packaging of sterile specimen containers into blister packs and commercial-grade shipping containers, with a strict emphasis on ensuring product integrity during transit and adherence to ASTM D3951 standards for protective packaging. All work must maintain sterility throughout the packaging process and meet rigorous environmental and handling requirements to safeguard sensitive medical samples. The packaging must be designed to withstand transportation stresses while complying with federal specifications for medical device distribution. This is a subcontract opportunity issued by the Department of Defense under the Medical Supply Chain FSH organization, with performance required at the location in Groton, Connecticut, 06340-4905. The NAICS code 323113 identifies the industry as printing and related support activities, reflecting the specialized nature of the packaging operations. Bids must be submitted by August 3, 2026, and the solicitation is open to qualified subcontractors capable of scalable, compliant, and consistent execution of sterile packaging services under defined federal supply chain protocols.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Specialized Packaging & Labeling for Medical ItemsThe contract entails the specialized packaging, preservation, and labeling of acupuncture needles in strict compliance with MIL-STD-129, RP001, and Medical Marking Standard No. 1, ensuring all medical devices meet military-grade documentation and identification requirements. The work must be performed to exacting standards that guarantee traceability, sterility, and proper handling throughout the supply chain, with labeling that includes all mandated data elements for military logistics and inventory management. This subcontract is issued under NAICS code 323113 and is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance specifically required at Fort Bragg, North Carolina, ZIP 28310. Bidders must respond by the deadline of August 3, 2026, with proposals submitted through the DIBBS portal at the provided link. The opportunity is structured as a subcontract under a larger defense supply chain initiative, and while no set-aside designation is specified, participation is expected from vendors with demonstrated expertise in medical device packaging and military labeling protocols. All submissions must align precisely with the referenced standards and demonstrate capacity for consistent, high-volume production and quality control to support military medical operations.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract calls for commercial packaging, labeling, and barcoding services specifically for therapeutic cushions to be supplied to military medical channels, requiring strict adherence to DLA and Department of Defense medical standards. All packaging must include sealed unit containers to ensure product integrity, data matrix codes for automated tracking and inventory management, and compliant hazard labels that meet regulatory requirements for safe handling and transport. The services are intended to support the Medical Supply Chain FSH and are performance-based at Fort Bragg, North Carolina, with the zip code 28310 designated as the place of performance. All deliverables must be completed in full compliance with the specified technical and regulatory guidelines without room for deviation. This is a subcontract opportunity under NAICS code 323113, posted on July 26, 2026, with a response deadline of August 3, 2026. There is no set-aside designation, and the solicitation is open to qualified commercial entities capable of meeting the stringent packaging and labeling requirements. Interested parties must submit proposals through the DIBBS platform using the provided link, ensuring all documentation accurately reflects compliance with military medical supply protocols. The lack of a point of contact listed implies that submission guidelines and technical specifications must be fully understood from the posted requirements before proposing.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Product Packaging and Labeling ServicesThe contract requires secondary packaging, kitting, and labeling services for hypodermic needles under MIL-STD-129 compliance, ensuring all items are properly prepared for military supply chain distribution. Each package must include the National Stock Number, CAGE code, lot traceability information, and expiration dates to maintain strict accountability and regulatory adherence. The work is to be performed at the specified location in Groton, Connecticut, with all labeling and packaging procedures following exact military standards to ensure compatibility with existing logistics systems. This subcontract is issued under NAICS code 323113 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Proposals must be submitted by the deadline of August 3, 2026, with no set-aside provisions indicated. The contract emphasizes precision in labeling and documentation to support traceability and inventory management across defense medical operations, requiring proven expertise in military-grade packaging and stringent quality control processes.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Specialized Packaging and Labeling Services for Hazardous Medical SuppliesThe contract requires the provision of specialized packaging, labeling, and marking services for hazardous medical items, ensuring full compliance with OSHA hazard communication standards, MIL-STD-129, and Medical Marking Standard No. 1. It involves the accurate application of NSN and SIN identifiers, proper hazard labeling, and adherence to Department of Defense requirements for the handling and identification of dangerous medical supplies. Services may also include kitting operations and associated documentation support to meet operational and regulatory needs. The work is to be performed at a designated location in Annville, Pennsylvania, with a zip code of 17003-5003. This is a subcontract under the NAICS code 323113, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is accessible via the DIBBS platform. All activities must align with federal regulatory frameworks to ensure the safe transport, storage, and use of hazardous medical materials.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

COVER, ACCESSThe contract pertains to the procurement of 41 units of a COVER, ACCESS item under solicitation SPE7L1-26-T-834S, with delivery required 116 days after award to the DLA Distribution Facility in New Cumberland, Pennsylvania. All items must comply with stringent DLA packaging and quality standards, including adherence to ASTM D3951 for non-hazardous materials and FED-STD-313 for hazardous materials, with palletization governed by RP001. Marking and labeling must follow MIL-STD-129 for shipment and MIL-STD-130N for permanent identification, including Data Matrix barcoding, while hazardous materials require compliance with OSHA’s Hazard Communication Standard and submission of approved Safety Data Sheets prior to award. Inspection and acceptance occur at origin, employing MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; only zero non-conformances are permitted unless otherwise stated. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Export-controlled technical data is subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and contractors must be certified under the US/Canada Joint Certification Program, complete DLA export control training, and comply with DFARS 252.225-7048. The contractor must hold CMMC Level 2 certification for cybersecurity safeguards and meet all applicable FAR and DFARS clauses, including employment eligibility, combating trafficking, sustainable products, and accelerated payments to small business subcontractors. Payment must be submitted electronically through Wide Area WorkFlow, and the contract operates under simplified acquisition procedures with an inferred lowest price technically acceptable award basis, though formal evaluation factors are not specified. Offerors must provide their UEI and CAGE codes, represent their small business status and socioeconomic classifications, and ensure compliance with all regulatory requirements prior to submission via DIBBS by the stated deadline.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

LEVER, REMOTE CONTROThis contract solicits 15 units of a lever remote control with part number 3040-00-614-7196 under solicitation SPE7L1-26-Q-1370, with a delivery deadline of 118 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions tied to drawings and quality assurance documents including DRW 11671161 Notes 7 and 8, and SQAP QA-19207-11671161, which apply to critical, major characteristics and only to major characteristic 101. The item is subject to stringent quality controls including tailored higher-level requirements for manufacturers and non-manufacturers, inspection and acceptance at origin, and rigorous configuration change management requiring engineering change proposals and variance requests. All components must comply with applicable Qualified Products Lists or Qualified Manufacturers Lists as outlined in procurement note H02. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, mandating approved substitutes where required. Technical data associated with this item is subject to export control under ITAR or EAR, making unauthorized disclosure—whether to foreign nationals in the U.S. or abroad—an infringement. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access such data, with DFARS 252.225-7048 strictly enforced. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate CMMC Level 2 certification by a third-party assessment organization. The solicitation closed August 5, 2026, with performance to be delivered to Barstow, CA, under federal acquisition rules administered by the Department of Defense's Land Supply Chain.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

O-RINGThe contract is for the procurement of 857 O-rings with NSN/Part Number 5331-01-516-2648, issued under solicitation SPE7L1-26-T-880X with a response deadline of August 7, 2026, and a delivery requirement of 76 days after order. All items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and must adhere to specific DLA directives including packaging standards, removal of government identification from non-accepted supplies, and mandatory retention of supply chain traceability documentation as outlined in DLA Directive Procurement Note C03 from August 2016. The use of class I ozone-depleting chemicals is strictly prohibited, and asbestos must not be present in any component; any substitute materials require formal approval per Clause L30 and Provision 4 conditions. The purchase request number is 7016086295, and the items are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting agency is the Department of Defense under the Land Supply Chain, with Kelly Day listed as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

O-RINGThis contract is for the procurement of 447 O-RINGS with NSN 5331-00-944-1525 under solicitation SPE7L1-26-T882K, with a total quantity requirement of 1860 units across all segments. The items must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must be manufactured to the current revision of the applicable MIL or industry-standard part specification, with prior revisions still acceptable for previously produced hardware. Only manufacturers and assemblers listed on the PRI-QPL-AMS7272 Qualified Products List are eligible to supply this item, and all products must be sourced from accredited facilities recognized by the Performance Review Institute. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major with verification levels assigned accordingly. The O-rings are classified as a TYPE I (Code Y) item with a non-extendable shelf life of 180 months and must be free of asbestos, with any previously approved asbestos-containing materials now prohibited. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1 requirements, meaning they must be enclosed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor deliveries, foreign military sales, and stock shipments. The contract specifies delivery within 128 days after order issuance, with a response deadline of August 7, 2026, and falls under NAICS code 339991. The contracting office is the Department of Defense’s Land Supply Chain, with performance located at Tinker AFB, Oklahoma, and Kristie Fown is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

GENERATOR, ENGINE ACCESThe contract pertains to the procurement of five generator engine accessories with NSN 2920-01-595-9464 and part number 4982228 from CUMMINS INC, under solicitation SPE7L1-26-T-880Y. Delivery is required within five days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the point of origin. All items must be packaged in accordance with MIL-STD-2073-1E, using packing code Q, level B, and marked per MIL-STD-129 with no special marking required; palletization must comply with DLA packaging standards. The units are to be shipped to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight details governed by DLA procedural notes and no single freight forwarder assigned. The technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The purchase price is set at $5.00 per unit for a total of $25.00, and the required delivery date is July 28, 2026, with the solicitation posted on July 27, 2026 and responses due by August 7, 2026. The contracting officer is Kristina Derry of the Department of Defense, Land Supply Chain, and the contract is classified under NAICS code 336310.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

O-RINGThis contract pertains to the procurement of 1,630 O-RINGS with NSN 5331-01-080-9232 under solicitation SPE7L1-26-T-881A, issued by the Department of Defense’s Land Supply Chain. The items must be delivered within 87 days of award to Robins Air Force Base, Georgia, with full and open competition authorized. The technical and quality standards are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. All supplies must be free of asbestos and ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specifications. Government identification must be removed from non-accepted supplies, and covered defense information protocols may apply. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and Kelly Day at DLA is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

BRACKET, MOUNTINGThe contract is for the procurement of 13 mounting brackets identified by NSN 5340-00-133-8107, issued under solicitation SPE7L1-26-T-842C as a Total Small Business Set-Aside under NAICS code 332510. The item is to be manufactured using a metal casting process requiring specialized tooling, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. Delivery is due 237 days after award to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB Origin terms requiring the contractor to assume all transportation costs to the designated destination. The contract mandates strict compliance with DLA packaging standards, including MIL-STD-129 for marking and labeling, MIL-STD-130N for Unique Item Identification and barcoding, and RP001 for palletization, while prohibiting the use of Class I ozone-depleting chemicals and requiring adherence to the DLA Master List of Technical and Quality Requirements which supersedes any conflicting specifications. The item contains components governed by Qualified Products or Manufacturers Lists, necessitating qualification compliance as outlined in procurement note H02. The contract imposes comprehensive cybersecurity and export control obligations, including mandatory CMMC Level 2 certification for the contractor or its third-party assessor and compliance with NIST SP 800-171 to safeguard Covered Defense Information as defined by RD002. All technical data associated with the item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD training, and DLA approval. Hazardous materials must be labeled and documented per 29 CFR 1910.1200 and FED-STD-313, with pre-award submission of hazard labels and Material Safety Data Sheets required. Ocean transportation must use U.S.-flag vessels unless a waiver is granted, and pre- and post-shipment notifications to MARAD are mandatory. Invoices must be submitted electronically via WAWF, and the contractor must affirm compliance with whistleblower protections, restrictions on former DoD official compensation, and employment eligibility verification. All proposals must be submitted through DIBBS by the deadline, and while no pricing data is provided, the award may be made using automated systems, with price being a significant factor under this small business-focused procurement.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

GASKETThe contract specifies the procurement of a gasket with NSN 5330-01-344-9582 and part number MM432136, quantity one unit, to be delivered within five days to Fort Bliss, Texas, under solicitation SPE7L1-26-T-880B. Delivery is FOB origin, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 for UV-sensitive items, with no asbestos permitted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked in accordance with MIL-STD-130N and palletized per DLA packaging requirements. Shipments are to be made via traceable freight, not parcel post, to the specified Fort Bliss address, with the federal supply classification and unit of issue governed by DLA standards. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality clauses identified by R or I numbers, with revisions controlled by the solicitation issue date. The designated point of contact is Kristina Derry, and the required delivery date is July 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

BRACKET, ANGLEThe contract pertains to the procurement of a BRACKET, ANGLE with NSN/Part Number 5340-01-572-6194, for a single unit under Purchase Request 7016529883. Delivery is required within five days of award, and the solicitation number is SPE7L1-26-T-485J, with responses due by July 30, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must conform to DLA packaging standards, and any non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is Fort Campbell, Tennessee, 42223-0000, with the contracting office under the Department of Defense’s Land Supply Chain. Primary point of contact is Kristina Derry, reachable via email and phone provided. The NAICS code is 332510, and the solicitation is classified as federal.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

O-RING SETThe contract pertains to the procurement of an O-RING SET designated by NSN 5331-01-728-9785, with a quantity of 2,000 units, to be delivered within 229 days after order. All items must be packaged and sealed in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. The product must be free of asbestos and class I ozone-depleting chemicals, with any alternative materials requiring formal approval. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Notes C03 from August 2016, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date. Documentation for source approval, removal of government identification from non-accepted items, and contractor retention of traceability records are mandatory. The solicitation number is SPE7L1-26-T-847A, issued on July 16, 2026, with responses due July 27, 2026, under NAICS code 333618, managed by the Department of Defense’s Land Supply Chain, with performance directed to New Cumberland, Pennsylvania, and primary point of contact Chelsea Cunningham.

Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

RETAINER, FLOATINGThis contract is a retainer agreement for a floating retainer part designated by NSN 5340014816884 and part number HS6067-9, sourced from SPS TECHNOLOGIES LLC under solicitation SPE7L1-26-U-0505. It specifies a total quantity of 65 units at a unit price of $65.00, with delivery required within 116 days FOB origin, and no variance allowed in quantity. The item is classified as a critical application item and must comply with DLA’s Master List of Technical and Quality Requirements, particularly MIL-STD-130N for identification marking, MIL-STD-129 for packaging and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous, in which case FED-STD-313 applies. All packaging and palletization must adhere to RP001’s DLA packaging requirements, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination point. The contract is a total small business set-aside under NAICS code 332510, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. It was posted on July 27, 2026, with responses due by August 11, 2026. The unit of issue is each (EA), consistent with DoD standards, and the buyer may not purchase the full estimated quantity as listed. Technical specifications referenced are controlled by the latest revision of the DLA Master List effective on the solicitation issue date, and all packaging compliance supersedes any commercial standards unless superseded by DLA’s directives. Point of contact for the solicitation is Paul Kelley, and additional details can be referenced through the DIBBS portal.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

PISTON, LINEAR ACTUAThe contract is for one linear actuating cylinder piston, identified by NSN 3040-01-167-9213 and part number 8J0113 from Caterpillar Inc, with a single unit of issue and a total price of $1.00. Delivery is required within 10 days to Fort McCoy, Wisconsin, under FOB origin terms, with no variance allowed in quantity. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including compliance with MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and shipments must be delivered via traceable freight methods, excluding parcel post. The shipment is designated as an RDD/ANMCS movement with a reference number and project code TP 2, and must be marked for delivery to the designated government facility. Inspection and acceptance occur at the destination, and the original delivery date is July 23, 2026. The contract is issued under solicitation SPE7L1-26-T-879S, with a response deadline of August 7, 2026, and falls under NAICS code 333613 for industrial machinery manufacturing. All requirements are governed by the DLA Master List, and government use identifiers and control codes are included for internal tracking and logistics purposes.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE