Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-compliant packaging, dry-air preservation, and standardized marking for valve components in accordance with MIL-STD-2073-1E and MIL-STD-129 specifications. All packaging must ensure long-term preservation against environmental degradation using dry-air (Ae) methods, and each item or unit must be clearly marked with the required data elements specified in MIL-STD-129 to enable accurate identification, tracking, and handling throughout the military supply chain. The work is classified as a subcontract under NAICS code 385110 and is being managed by DLA Dist San Joaquin under the Department of Defense, with performance obligated at the Tracy, California location with a zip code of 95304-5000. The opportunity was posted on August 3, 2026, and responses must be submitted no later than August 14, 2026.

General Info

Military packaging and marking per MIL-STD-2073-1E and MIL-STD-129 for valve components under DLA contract in Tracy, CA.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

385110View NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-1E compliant packaging, dry-air (Ae) preservation, and MIL-STD-129 marking for valve components.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Preservation ServicesThe contract requires the performance of cleaning, drying, and packaging operations for CLAMP and LOOP units in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, including the application of Preservation Method 10 to ensure long-term protection against environmental degradation. All units must be properly containerized and palletized to meet military logistics requirements, ensuring readiness for storage and transportation under rigorous conditions. The work demands precision adherence to federal specifications governing preservation and packaging to maintain operational integrity of the hardware throughout its lifecycle. This is a subcontract opportunity under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to respond. The action falls under NAICS code 385110, which corresponds to instruments and related products manufacturing, indicating the specialized nature of the packaging services required. The solicitation was posted on August 3, 2026, with bids due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will occur under the oversight of the DLA and must comply with all applicable defense standards without exception.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Defense Logistics Packaging and Preservation ServicesThe contract calls for comprehensive cleaning, drying, preservation, and packaging services for defense components in strict compliance with MIL-STD-129 labeling requirements. All services must ensure components are protected against corrosion, contamination, and environmental damage during storage and transit, with precise documentation and labeling adhering to military standards. The work is expected to support the Department of Defense’s strategic acquisition program, with performance likely required across multiple locations to meet operational readiness needs. This is a subcontract opportunity posted on August 3, 2026, with responses due by August 18, 2026, under NAICS code 385110 for industrial cleaning and preservation services. The contracting authority is the Strategic Acquisition Program Directorate, and the solicitation is accessible via the DIBBS system. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors capable of meeting the technical and regulatory requirements for defense-related packaging and preservation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for electronic components, adhering strictly to MIL-STD-2073-1E standards for dry preservation and MIL-PRF-81705 specifications for electrostatic discharge and electromagnetic interference protection. All materials and processes must meet rigorous defense-grade requirements to ensure long-term integrity, environmental resilience, and compatibility with military storage and transport protocols. The work involves specialized handling, sealing, and packaging techniques designed to safeguard sensitive electronics against moisture, corrosion, static, and electromagnetic threats during extended periods of storage or transit. The contract is classified as a subcontract under NAICS code 385110 and is managed by the Active Devices Division within the Department of Defense. Performance is designated to take place at a facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Responses are due by August 14, 2026, and the opportunity was posted on August 3, 2026. Interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military standards, as deviations will render offers noncompliant. The solicitation is accessible via the DIBBS portal for further submission details.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Medical Device Packaging and Kitting ServicesThe contract requires the provision of compliant packaging, labeling, and kitting services for defibrillator electrode pads according to DLA and military medical standards, ensuring all units meet rigorous operational and regulatory requirements for use by U.S. military medical personnel. This includes assembling unit packs, creating overpacks, and properly palletizing shipments to support efficient logistics and storage in field and garrison environments, with all work must be performed in accordance with Defense Logistics Agency specifications and military medical protocols. The solicitation is issued as a subcontract under NAICS code 385110, with a response deadline of August 10, 2026, and the place of performance is designated as Fort Bragg, North Carolina, with a zip code of 28310. The contracting activity is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF, indicating the work directly supports military medical readiness. The solicitation is accessible through the DIBBS system, and while no set-asides or point of contact details are specified, strict adherence to packaging, labeling, and logistics standards is mandatory for compliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of military-compliant packaging, preservation, and labeling of hazardous materials in strict adherence to MIL-STD-2073-1E and Defense Logistics Agency standards, with full documentation and hazard communication protocols to ensure safety and regulatory compliance. All work must align with the technical and procedural mandates for handling dangerous goods within defense logistics systems, including accurate labeling, preservation methods suitable for long-term storage and transport, and complete recordkeeping to support inspection and audit readiness. This is a subcontract opportunity under NAICS code 385110, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026. Interested parties must comply with all DLA requirements and be prepared to demonstrate capability in handling hazardous materials under military specifications, with an emphasis on conformity, traceability, and safety throughout the packaging and labeling lifecycle.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires compliance with MIL-STD-129 and DLA RP001 standards for the packaging, labeling, and palletization of military-grade materials, ensuring all items are properly prepared for government logistics and distribution. Hazard communication must adhere to OSHA standards, meaning all hazardous materials must be clearly marked, labeled, and accompanied by appropriate documentation to ensure safety and regulatory compliance throughout the supply chain. The work must be performed to exact specifications for identification, marking, and unit configuration to meet Department of Defense requirements. The solicitation, issued by the Fluid Handling Division under the Department of Defense, is classified as a subcontract with a NAICS code of 385110, indicating it pertains to packaging and containers manufacturing. Performance is designated for New Cumberland, Pennsylvania, with the ZIP code 17070-5002 specified as the official place of performance. The response deadline is August 13, 2026, and the solicitation was posted on August 2, 2026, providing potential bidders a 11-day window to submit proposals through the DIBBS platform using the reference number SPE7M426T297X. There is no set-aside type indicated, meaning the contract is open to all eligible subcontractors regardless of business size or ownership status.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires qualified small businesses to provide comprehensive packaging, preservation, cleaning, and barcoding services for fasteners in full compliance with military standards, supporting DLA Logistics Integration. All work must meet strict military specifications to ensure the integrity, longevity, and traceability of fasteners throughout their supply chain lifecycle. This is a total small business set-aside under SBA guidelines, exclusively open to small business concerns as defined by the Small Business Administration, with the North American Industry Classification System code 385110 applying to the work scope. The solicitation is managed by the ASC Commodities Division under the Department of Defense and is open for responses until August 17, 2026. Performance will occur at locations designated by the government, with all submissions required through the DIBBS system via the provided UI link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Marking Services for Military ShipmentThe contract requires certified packaging and marking services for Towbar Wheels in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet Department of Defense acceptance criteria. This includes proper shelf-life coding, palletization, and labeling procedures to guarantee traceability, durability, and uniformity throughout the supply chain. The work must adhere to strict military specifications for handling, storage, and shipment readiness, with all documentation and physical markings accurately applied to satisfy DLA requirements. This is a small business set-aside subcontract under NAICS code 385110, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on August 2, 2026, with responses due by August 5, 2026. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment Manufacture & Con organization, though the exact place of performance and point of contact are unspecified. Bidders must ensure full regulatory compliance and operational readiness to meet the tight turnaround, with all work intended to support military logistics and procurement workflows.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

in about 12 hours

Military-Compliant Packaging and Palletization ServicesThe contract mandates the packaging and palletizing of LED components in full compliance with military specifications, requiring adherence to rigorous preservation techniques to ensure product integrity during storage and transport. All procedures must align with Defense Logistics Agency and federal labeling standards, ensuring traceability, durability, and compliance with government-mandated documentation protocols. The work is to be performed at the designated place of performance in Albany, Georgia, with strict attention to quality control and documentation throughout the process. This subcontract, issued by the Active Devices Division under the Department of Defense, is solicited under NAICS code 385110 and requires responses by August 13, 2026. While no set-aside designation is specified, participation is open to qualified subcontractors capable of meeting the stringent military packaging and labeling requirements. All deliverables must be verified to ensure conformance with federal directives, and performance is subject to inspection and audit per DOD contractual obligations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Medical Item Packaging and Marking ServicesThe contract requires the performance of military-standard packaging, preservation, and marking services for medical supplies, with specific emphasis on accurate barcoding and secure storage labeling to ensure compliance with defense logistics requirements. All work must meet stringent military specifications to maintain the integrity, traceability, and readiness of medical items throughout the supply chain, particularly in deployment and field conditions. The place of performance is designated as Fort Hood, Texas, with a zip code of 76544, indicating that operations will be conducted at or near this military installation. This is a subcontract opportunity under the NAICS code 385110, which corresponds to medical equipment and supplies manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD SURG FSF. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DIBBS portal. Contractors must be prepared to align with federal defense standards, demonstrate capability in military-grade packaging protocols, and ensure full traceability of medical items through standardized labeling and documentation processes.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Defense Packaging & Labeling ServicesThe contract requires compliant packaging, preservation, and labeling of fasteners in accordance with military standards to ensure integrity and readiness during storage and transit. All deliverables must meet defined defense specifications to support logistical and operational requirements, with strict adherence to handling procedures for fasteners intended for military use. The place of performance is established at FPO 09569, indicating delivery to a military postal address, likely for overseas or deployment-bound supply chains. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 385110, which pertains to other miscellaneous durable goods merchant wholesalers. The solicitation opened on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DLA DIBBS platform. Failure to meet packaging and labeling requirements will result in non-compliance, potentially leading to rejection of delivery, cost adjustments, or termination of performance. The contract emphasizes quality control and standardization across all phases of preparation to ensure seamless integration into military supply systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Labeling, and Compliance Services for DLA ShipmentThe contract requires the provision of commercial packaging, preservation, palletization, and federal-compliant labeling services tailored for delivery to the Defense Logistics Agency. All labeling must adhere strictly to MIL-STD-129 and MMS No. 1 standards, incorporating 2D Data Matrix barcoding to ensure accurate tracking and inventory management throughout the military supply chain. Services must be performed to meet exacting U.S. Department of Defense specifications for readiness, traceability, and operational compliance. Performance is anchored at Fort Bliss, Texas, with the work classified as a subcontract under NAICS code 385110, reflecting activity in packaging and labeling services. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026. The agency sponsoring the requirement is the Medical Supply Chain FSH under the Department of Defense, indicating the goods involved pertain to medical equipment or supplies. Contractors must ensure full alignment with federal logistics protocols to support DLA’s mission of timely, secure, and auditable delivery of critical supplies.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-Q-0447

The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L7-26-T-4560

The contract under solicitation number SPE7L7-26-T-4560 is for Production Lot Testing of an item with NSN 0001S00000062, quantity 449 units, to be delivered within 699 days after award. The work is performance under the Department of Defense through DLA San Joaquin, with the place of performance located in Tracy, California, 95304-5000. The solicitation was posted on August 4, 2026, with proposals due on August 17, 2026, and falls under NAICS code 335910 for other electrical equipment and component manufacturing. The contractor must conduct production lot testing and prepare a formal test report labeled clearly with the contract number and lot/item number, then present it to the Quality Assurance Representative for review. All shipments of PLT reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving reports, a copy of the contract or order, all applicable test reports showing actual results against specified tolerances, material and process certifications, operation and inspection method sheets, and drawings used in manufacturing the tested samples, with proper markings to restrict public disclosure and limit government use as required. Primary point of contact for inquiries is Molly Teegarden, reachable at 614-557-3110 or molly.teegarden@dla.mil.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

VALVE, BUTTERFLY

Solicitation # SPE7MC-26-T-167D

The contract pertains to the procurement of two butterfly valves with part number 24JG56431X and NSN 4820-01-728-8390, supplied by Crane Co Valve Division. The valves are designated as a critical application item and must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier, as mandated by NAVSEA 5100-003D. The valves are to be delivered FOB origin within 140 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 00-00 indicating no additional requirements. Palletization follows DLA’s RP001 packaging requirements. Delivery is directed to the designated receiving warehouse in Tracy, California, with a need ship date of January 5, 2027, and an original required delivery date of February 28, 2027. The contract was issued under solicitation SPE7MC-26-T-167D by DLA Dist San Joaquin, a Department of Defense agency, with the point of contact being Paula Mcclary.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

BUBBLER, DRINKING FOUNT

Solicitation # SPE8E8-26-T-4957

The contract is for the procurement of 120 units of a bubbling drinking fountain with part number 030774-006 and NSN 4510014733230, awarded under solicitation SPE8E8-26-T-4957 by the Defense Logistics Agency District San Joaquin. Delivery is required within 58 days of contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific unit packaging, cushioning, and marking requirements, with no special marking codes applied. The item is classified as a critical application item and must adhere strictly to DLA packaging and technical requirements, including the prohibition of intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, and instrumentation meeting NAVSEA 5100-003D standards, which must include secondary containment. Delivery is to be made to the designated warehouse in Tracy, California, and transportation logistics follow DLA procedural notes C19 and C20. The contract specifies a zero variance on quantity, with a required delivery date of August 4, 2026, and solicitation responses due by August 17, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and source approval documentation must be submitted under RC001 for any non-conforming suppliers.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 12 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-167F

The contract specifies the procurement of five safety relief valves, identified by NSN 4820-01-521-3089 and part number P052935-00044, manufactured by TIMKEN GEARS & SERVICES INC. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and packaging guidelines, with palletization following DLA’s RP001 requirements. The contract requires delivery of all units FOB origin within 140 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DLA Dist San Joaquin in Tracy, California, and the original required delivery date is January 15, 2027, with a need ship date of January 5, 2027. The solicitation, issued under contract number SPE7MC-26-T-167F, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 332911. All shipments must follow DLA Transportation Procurement Notes C19 and C20, and the point of contact for the solicitation is Paula McClary, reachable via email and phone as provided.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L7-26-Q-2111

The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

FILTER ELEMENT, REVE

Solicitation # SPE8E8-26-T-4955

The contract pertains to the procurement of 131 filter elements for reverse osmosis systems, identified by NSN 4610-01-589-8131, under purchase request 7017286982. Delivery is required within 67 days of award, with performance designated for Tracy, California, ZIP 95304-5000. The solicitation number is SPE8E8-26-T-4955, issued by the DLA San Joaquin under the Department of Defense, with a posted date of August 4, 2026, and a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The NAICS code 333924 indicates the product category, and the contracting office is managed by Alexis Selby, reachable via email and phone. Government identification must be removed from non-accepted supplies as per RQ011, and all submissions must comply with the DLA packaging standards outlined in RP001.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

POLISH, PLASTIC

Solicitation # SPE8E5-26-T-3766

This contract specifies the procurement of Polish, Plastic under solicitation SPE8E5-26-T-3766, with a required delivery of 115 cases to be shipped FOB origin within 82 days, targeting a need ship date of June 24, 2026, and an original delivery deadline of November 29, 2026. The item is identified by NSN 7930-01-669-3161 and is classified as a Type I, non-extendable shelf-life item with a 36-month expiration period, subject to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, including special labeling code 32 for shelf-life type. Packaging must comply with DLA’s established standards, using a U code, dry preservative method, and intermediate container D3, without cushioning or dunnage, and must be palletized according to DLA guidelines. The contract enforces zero variance in quantity delivery and mandates inspection and acceptance at the destination, with government identification removed from non-accepted items. Technical and quality requirements are incorporated by reference from the DLA Master List, and the item is subject to Covered Defense Information protocols. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation follows DLA procedural notes C19 and C20. The unit of issue is the case, with a total contract value of $115.00 per case, and all terms are governed by the DLA revision in effect at the solicitation date.

Polish and Other Sanitation Good Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7MC-26-T-166X

The contract specifies the procurement of a flow control valve for E/I winch hydraulic systems, with material requirements limited to aluminum or bronze. An exception is noted where the original equipment manufacturer has updated the part number to R431002638, which is now acceptable alongside the drawing-referenced part number P50493-0001. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to defense information controls under RD002 and must comply with DLA packaging standards under RP001. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the origin. Government identification must be removed from rejected supplies, and technical data associated with the valve is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The NSN is 0001S00000053, with 74 units requested under purchase request 7017697083, delivery due in 499 days after award. The solicitation is issued under SPE7MC-26-T-166X as a total small business set-aside, with the contracting activity managed by DLA District San Joaquin, and responses due by August 17, 2026.

Industrial Valve Manufacturing

POSTED

about 12 hours ago

DEADLINE

ANALYZER-CHARGER, BA

Solicitation # SPE7L7-26-T-4561

The contract pertains to the procurement of 456 units of the 490PT+ Pulse Tech Digital Battery Analyzer Tester & Printer, identified by NSN 6130015109594 and part number 741X890, under solicitation SPE7L7-26-T-4561, awarded as a Total Small Business Set-Aside. Delivery is required FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination facility in Tracy, California. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting commercial standards, and must be marked, labeled, and packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Hazardous material provisions prohibit intentional addition of mercury or mercury-containing compounds unless exempted for specific functional components such as batteries or sensors, and portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet ASTM D3951 for non-hazardous items or FED-STD-313 TQ IP025 for hazardous materials. The unit of issue is each, with a total contract value based on a unit price for 456 units, and shipping must adhere to DLA transport procedures C19 and C20. The solicitation closed on August 17, 2026, with a required delivery date of April 15, 2027, and is managed by the Department of Defense through DLA Dist San Joaquin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the preparation and submission of Safety Data Sheets and OSHA-compliant hazard warning labels for all delivered items, ensuring full adherence to federal regulations and Department of Defense standards. All documentation must accurately reflect the chemical composition, hazards, and safety precautions associated with the materials being supplied, with strict compliance to OSHA’s Hazard Communication Standard and applicable DoD directives. The work is to be performed for the DLA Dist San Joaquin under a subcontract arrangement, with performance located in Tracy, California, at zip code 95304-5000. The solicitation, categorized under NAICS code 541690 for other scientific and technical consulting services, was posted on August 3, 2026, and responses are due by August 14, 2026. Contractors must ensure that their SDS and labeling processes meet the highest levels of regulatory accuracy and consistency to support the safe handling, storage, and transportation of hazardous materials within the defense supply chain.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Check Valves (NSN 4820014214710)The contract seeks the procurement and delivery of four units of a specific check valve identified by National Stock Number 4820014214710, with strict adherence to military packaging, labeling, and hazardous materials handling requirements. This subcontract, issued by DLA Dist San Joaquin under the Department of Defense, is for delivery to a performance location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the NAICS code 332912 indicating the industrial classification for other fabricated metal product manufacturing. The supplier must ensure full compliance with all applicable military specifications for packaging and hazardous material handling to meet operational and safety standards.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE