Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging and Preservation Services for Defense Logistics

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires certified packaging and preservation services for UV-sensitive rubber components in strict compliance with MIL-STD-2073-1E and MIL-DTL-117 standards, ensuring defense-grade protection against environmental degradation. All work must adhere to military specifications for materials, labeling, sealing, and storage protocols to maintain component integrity during transit and long-term storage. The services are being procured as a subcontract under the Department of Defense’s Land Supply Chain, with performance to be conducted at the specified location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation, categorized under NAICS code 385110 for Packaging and Containment Services, was posted on August 3, 2026, with responses due by August 14, 2026. While no set-aside designation is specified, bidders must demonstrate proven capability in military packaging and preservation, including documented compliance with the referenced standards. The contract does not specify a solicitation number, and no point of contact is listed, requiring interested parties to access the full details via the provided DIBBS portal link.

General Info

Certified MIL-STD-2073-1E/MIL-DTL-117 packaging for UV-sensitive rubber components at New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

385110View NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Certified military-compliant packaging and preservation of UV-sensitive rubber components per MIL-STD-2073-1E and MIL-DTL-117.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Palletization ServicesThe contract requires the provision of packaging, preservation, and palletization services for defense items strictly in accordance with DLA RP001 and ASTM D3951 standards, ensuring all materials meet military-grade requirements for protection, durability, and handling. The work must be performed at Fort Hood, Texas, with the deliverables intended for use within the Department of Defense supply chain. Compliance with these specifications is non-negotiable, and all processes must align with federal defense logistics protocols to maintain readiness and interoperability. This subcontract opportunity is open for responses until August 17, 2026, with the solicitation posted on August 4, 2026. It falls under NAICS code 385110, which relates to packaging and container manufacturing, and is managed by the Construction & Equipment Containers division under the Department of Defense. Participation requires proven capability in military packaging systems, experience with preservation techniques for long-term storage, and the ability to palletize equipment securely for transport and storage under demanding conditions. The contract is not set aside for any specific small business category and all interested parties should submit proposals via the provided DIBBS portal link.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

Battery Packaging and Palletization ServicesThe contract requires the provision of military-compliant packaging, preservation, and palletization services for batteries in strict accordance with MIL-STD-2073-1E and RP001 standards, ensuring full adherence to Department of Defense preservation and handling protocols. All work must be performed to maintain the operational readiness and integrity of batteries during storage and transit, with packaging methods designed to withstand environmental stressors and extended shelf life requirements. The services are intended for delivery to FPO 09514, with performance expected to meet rigorous military logistics specifications. Submitted proposals must respond to the solicitation by the deadline of August 14, 2026, and the contract is classified as a subcontract under NAICS code 385110. The awarding agency is the Defense Logistics Agency, operating under the Department of Defense, and the procurement is open to qualified contractors capable of executing complex defense packaging operations. While no specific set-aside or organizational restrictions are indicated, bidders must demonstrate proven experience with military packaging standards and the ability to deliver compliant solutions on schedule. All submissions must be made through the official DIBBS portal using the provided solicitation link.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and marking services for taillights in full compliance with military standards MIL-STD-2073-1E, DLA RP001, and MIL-STD-129, with specific emphasis on Preservation Method 10 (Cling/Dry) to ensure long-term protection against environmental degradation. All components must be properly labeled and marked according to federal specifications, ensuring traceability, handling integrity, and readiness for military logistics and deployment. The work must be performed to exacting standards to support defense supply chain requirements and maintain operational readiness of critical equipment. This subcontract is issued by the Defense Logistics Agency under the Department of Defense and is scoped for performance at FPO, zip code 96692-7200. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. The NAICS code 385110 applies, indicating the nature of the service as related to the manufacturing of electrical lighting equipment and packaging services aligned with defense standards. Interested parties must submit proposals by the stated deadline to be considered for award, and all deliverables must strictly adhere to the referenced military specifications without exception.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThe contract requires the provision of military-grade packaging, preservation, and marking services compliant with MIL-STD-129, ASTM D3951, and DLA RP001 standards, ensuring all items are properly bar-coded and palletized for secure government delivery. These procedures are essential for maintaining the integrity, traceability, and readiness of defense-related shipments through standardized handling and identification protocols. The work must align with strict DoD requirements to support logistics operations and ensure uniformity across the supply chain. This subcontract is issued by the Department of Defense under the MARITIME SUPPLY CHAIN ESOC BUYS division, with the place of performance located at Jacksonville, Florida, zip code 32226-3404. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026, with the NAICS code 385110 indicating classification under packaging and container manufacturing services. All submissions must adhere to the specified technical and procedural guidelines to meet military logistics standards for distribution and storage.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, dry-air preservation, and standardized marking for valve components in accordance with MIL-STD-2073-1E and MIL-STD-129 specifications. All packaging must ensure long-term preservation against environmental degradation using dry-air (Ae) methods, and each item or unit must be clearly marked with the required data elements specified in MIL-STD-129 to enable accurate identification, tracking, and handling throughout the military supply chain. The work is classified as a subcontract under NAICS code 385110 and is being managed by DLA Dist San Joaquin under the Department of Defense, with performance obligated at the Tracy, California location with a zip code of 95304-5000. The opportunity was posted on August 3, 2026, and responses must be submitted no later than August 14, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the performance of cleaning, drying, and packaging operations for CLAMP and LOOP units in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, including the application of Preservation Method 10 to ensure long-term protection against environmental degradation. All units must be properly containerized and palletized to meet military logistics requirements, ensuring readiness for storage and transportation under rigorous conditions. The work demands precision adherence to federal specifications governing preservation and packaging to maintain operational integrity of the hardware throughout its lifecycle. This is a subcontract opportunity under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to respond. The action falls under NAICS code 385110, which corresponds to instruments and related products manufacturing, indicating the specialized nature of the packaging services required. The solicitation was posted on August 3, 2026, with bids due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will occur under the oversight of the DLA and must comply with all applicable defense standards without exception.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Defense Logistics Packaging and Preservation ServicesThe contract calls for comprehensive cleaning, drying, preservation, and packaging services for defense components in strict compliance with MIL-STD-129 labeling requirements. All services must ensure components are protected against corrosion, contamination, and environmental damage during storage and transit, with precise documentation and labeling adhering to military standards. The work is expected to support the Department of Defense’s strategic acquisition program, with performance likely required across multiple locations to meet operational readiness needs. This is a subcontract opportunity posted on August 3, 2026, with responses due by August 18, 2026, under NAICS code 385110 for industrial cleaning and preservation services. The contracting authority is the Strategic Acquisition Program Directorate, and the solicitation is accessible via the DIBBS system. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors capable of meeting the technical and regulatory requirements for defense-related packaging and preservation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for electronic components, adhering strictly to MIL-STD-2073-1E standards for dry preservation and MIL-PRF-81705 specifications for electrostatic discharge and electromagnetic interference protection. All materials and processes must meet rigorous defense-grade requirements to ensure long-term integrity, environmental resilience, and compatibility with military storage and transport protocols. The work involves specialized handling, sealing, and packaging techniques designed to safeguard sensitive electronics against moisture, corrosion, static, and electromagnetic threats during extended periods of storage or transit. The contract is classified as a subcontract under NAICS code 385110 and is managed by the Active Devices Division within the Department of Defense. Performance is designated to take place at a facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Responses are due by August 14, 2026, and the opportunity was posted on August 3, 2026. Interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military standards, as deviations will render offers noncompliant. The solicitation is accessible via the DIBBS portal for further submission details.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Medical Device Packaging and Kitting ServicesThe contract requires the provision of compliant packaging, labeling, and kitting services for defibrillator electrode pads according to DLA and military medical standards, ensuring all units meet rigorous operational and regulatory requirements for use by U.S. military medical personnel. This includes assembling unit packs, creating overpacks, and properly palletizing shipments to support efficient logistics and storage in field and garrison environments, with all work must be performed in accordance with Defense Logistics Agency specifications and military medical protocols. The solicitation is issued as a subcontract under NAICS code 385110, with a response deadline of August 10, 2026, and the place of performance is designated as Fort Bragg, North Carolina, with a zip code of 28310. The contracting activity is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF, indicating the work directly supports military medical readiness. The solicitation is accessible through the DIBBS system, and while no set-asides or point of contact details are specified, strict adherence to packaging, labeling, and logistics standards is mandatory for compliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of military-compliant packaging, preservation, and labeling of hazardous materials in strict adherence to MIL-STD-2073-1E and Defense Logistics Agency standards, with full documentation and hazard communication protocols to ensure safety and regulatory compliance. All work must align with the technical and procedural mandates for handling dangerous goods within defense logistics systems, including accurate labeling, preservation methods suitable for long-term storage and transport, and complete recordkeeping to support inspection and audit readiness. This is a subcontract opportunity under NAICS code 385110, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026. Interested parties must comply with all DLA requirements and be prepared to demonstrate capability in handling hazardous materials under military specifications, with an emphasis on conformity, traceability, and safety throughout the packaging and labeling lifecycle.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires compliance with MIL-STD-129 and DLA RP001 standards for the packaging, labeling, and palletization of military-grade materials, ensuring all items are properly prepared for government logistics and distribution. Hazard communication must adhere to OSHA standards, meaning all hazardous materials must be clearly marked, labeled, and accompanied by appropriate documentation to ensure safety and regulatory compliance throughout the supply chain. The work must be performed to exact specifications for identification, marking, and unit configuration to meet Department of Defense requirements. The solicitation, issued by the Fluid Handling Division under the Department of Defense, is classified as a subcontract with a NAICS code of 385110, indicating it pertains to packaging and containers manufacturing. Performance is designated for New Cumberland, Pennsylvania, with the ZIP code 17070-5002 specified as the official place of performance. The response deadline is August 13, 2026, and the solicitation was posted on August 2, 2026, providing potential bidders a 11-day window to submit proposals through the DIBBS platform using the reference number SPE7M426T297X. There is no set-aside type indicated, meaning the contract is open to all eligible subcontractors regardless of business size or ownership status.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires qualified small businesses to provide comprehensive packaging, preservation, cleaning, and barcoding services for fasteners in full compliance with military standards, supporting DLA Logistics Integration. All work must meet strict military specifications to ensure the integrity, longevity, and traceability of fasteners throughout their supply chain lifecycle. This is a total small business set-aside under SBA guidelines, exclusively open to small business concerns as defined by the Small Business Administration, with the North American Industry Classification System code 385110 applying to the work scope. The solicitation is managed by the ASC Commodities Division under the Department of Defense and is open for responses until August 17, 2026. Performance will occur at locations designated by the government, with all submissions required through the DIBBS system via the provided UI link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Manufacture and Supply of Expansion Plug (NSN: 5340011109957)The contract requires the manufacture and delivery of 385 military-grade expansion plugs in strict accordance with technical drawing NR 19207 12292845, Rev G, with all items must comply with MIL-STD-130N for permanent marking and MIL-STD-1916 for statistical process control and inspection procedures. All components must be sourced exclusively from approved manufacturers as defined by strict source control requirements to ensure traceability and quality assurance throughout production. The plugs are identified by NSN 5340011109957 and fall under NAICS code 332510, indicating classification within the precision forged and stamped metal products manufacturing sector. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, and is structured as a subcontract under the Department of Defense’s Land Supply Chain, with performance to be fulfilled at New Cumberland, Pennsylvania, 17070-5002. The contract emphasizes adherence to defense-grade standards and supply chain integrity, with no set-aside provisions indicated, and is accessible via the DIBBS platform for interested vendors seeking to respond to the requirement within the specified timeframe.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

O-Ring Supply (NSN: 5331014926169)A single O-Ring with National Stock Number 5331014926169 is being procured under a subcontract for full compliance with military packaging, labeling, shelf-life, and hazardous materials communication standards. The requirement is part of a broader logistics effort managed by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance designated for Norfolk, Virginia, at zip code 23511-4497. The solicitation was posted on August 4, 2026, and responses are due by August 7, 2026, with the North American Industry Classification System code 332996 indicating the nature of the manufacturing activity. All deliverables must adhere strictly to defense-specific handling and documentation protocols to ensure operational readiness and safety during storage and deployment.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract requires identifying hazardous materials used in manufacturing or packaging processes and developing compliant Safety Data Sheets in accordance with OSHA 29 CFR 1910.1200(g) and Federal Standard No. 313 for submission to the Defense Logistics Agency. The work must ensure all SDS documentation meets federal regulatory standards for hazard communication and is accurately formatted for DLA’s requirements. The performance location is specified as Cherry Point, North Carolina, with a zip code of 28533-8051, indicating the physical site where the compliance activities must be carried out. The solicitation is classified as a subcontract under NAICS code 541620, which corresponds to other scientific and technical consulting services, suggesting the need for specialized expertise in regulatory compliance and chemical safety documentation. The opportunity was posted on August 4, 2026, with a response deadline of August 17, 2026, providing a narrow window for submission. The contracting organization is the Department of Defense through its Land Supply Chain division, underscoring the mission-critical nature of the work for defense logistics operations. The absence of a set-aside designation implies the contract is open to all qualified subcontrators without restrictions based on business size or ownership status. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain full details and submit proposals before the deadline.

Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

Packaging, Marking, and PalletizationThe contract requires comprehensive packaging, marking, and palletization of spring components in strict compliance with MIL-STD-129, ASTM D3951, and DLA RP001 standards to ensure readiness for military shipment and long-term storage. All work must adhere to the rigorous specifications for labeling, barrier materials, identification code application, and unit load configuration as mandated by these defense logistics regulations. The primary focus is on delivering items that meet uniformity, traceability, and durability criteria essential for DoD inventory management and field deployment. Performance is designated for Cherry Point, North Carolina, with a delivery window ending on August 17, 2026, following an August 4, 2026 posting date. This is classified as a subcontract under NAICS code 561910, indicating it falls within other support activities for transportation and logistics. The agency responsible is the Department of Defense through its Land Supply Chain division, and all activities must align with the defense supply chain's operational and compliance mandates without exception.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Supply Chain Traceability DocumentationThe contract requires the development and maintenance of fully auditable supply chain traceability records that track raw materials through every stage of production to the final product, ensuring full compliance with DLA Directive DLAD Procurement Note C03. This subcontract is focused on establishing a transparent, verifiable lineage for all components and materials used in defense-related procurement, with systems designed to support inspections, audits, and regulatory review at any point in the supply chain. Performance must meet strict documentation standards to guarantee accountability and integrity throughout the manufacturing and delivery process. The work is to be performed at Cherry Point, North Carolina, with a response deadline of August 17, 2026, and the solicitation was posted on August 4, 2026. The North American Industry Classification System code 541611 indicates the involvement of management, scientific, and technical consulting services, specifically related to supply chain traceability systems. The contracting organization is under the Department of Defense’s Land Supply Chain office, and the effort supports broader defense logistics requirements by ensuring compliance with federal procurement directives through precise, tamper-evident recordkeeping and documentation protocols.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Technical Documentation and Source Approval (SAR) SupportThe contract requires the preparation and submission of comprehensive Source Approval Request documentation to meet Department of Defense Land Supply Chain requirements, specifically for performance at Cherry Point, North Carolina, with a zip code of 28533-8051. The submission must include detailed technical drawings, material certifications, and quality assurance plans that collectively demonstrate full compliance with DLA standards for source approval. All deliverables must be submitted by the deadline of August 17, 2026, following a solicitation posted on August 4, 2026, under a subcontract type with the NAICS code 541330, which classifies the work under engineering services. The effort is critical to securing approved sourcing for defense-related components and requires strict adherence to technical and procedural specifications outlined by the agency.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Precision Spring ManufacturingA single precision spring must be manufactured to meet exact military specifications outlined by NSN 5360012445785 and part number PDI GROUND SUPPORT SYSTEMS, INC. OW357 P/N 8249-44, with strict adherence to material composition, dimensional tolerances, and performance criteria. The contract is a subcontract under the Department of Defense’s Land Supply Chain, requiring production at the specified place of performance in Cherry Point, North Carolina, with zip code 28533-8051. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026, targeting vendors with expertise in precision spring manufacturing under NAICS code 332722. All deliverables must comply with defense standards without deviation, and the work is not subject to any set-aside provisions.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

OIL FILTER CUTTER

Solicitation # SPE7L1-26-T-914K

The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.

Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

COVER, PROTECTIVE, DU

Solicitation # SPE7L1-26-T-914F

The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7L1-26-Q-1439

This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-915W

The contract specifies the procurement of 20 units of STRAP, WEBBING with NSN 5340-01-357-0800 under solicitation SPE7L1-26-T-915W, with a required delivery date of October 1, 2026, and a 44-day lead time. All items must be delivered FOB origin with no variance in quantity allowed and are subject to final inspection and acceptance at the destination. Packaging must comply with DLA’s master requirements, prioritizing MIL-STD-129 for marking and labeling, and adherence to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. Palletization must follow RP001 packaging guidelines, and all goods must be marked in accordance with MIL-STD-130N, though proprietary or insufficient identification is prohibited. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality criteria are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and revision control depends on solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation requirements are governed by DLAD procedural notes C19 and C20.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-915S

This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE