Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the provision of packaging, preservation, and protective treatment services for defense supplies in strict accordance with MIL-STD-2073-1E standards, requiring comprehensive cleaning, drying, and the application of only approved preservation techniques to ensure long-term durability and operational readiness of military materiel. All work must adhere to federal defense specifications for environmental protection, corrosion inhibition, and material integrity, with performance centered at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a subcontract opportunity reserved exclusively for Service-Disabled Veteran-Owned Small Businesses, identified by the NAICS code 332439 and categorized under a Service-Disabled Veteran-Owned Small Business Set-Aside. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Land Supply Chain under the Department of Defense. Participation requires full compliance with military packaging protocols and the ability to execute tasks in a secure, regulated defense supply environment.

General Info

Service-Disabled Veteran-Owned Small Business set-aside for MIL-STD-2073-1E packaging and preservation at New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging, preservation, and protective treatment of defense supplies per MIL-STD-2073-1E, including cleaning, drying, and use of approved preservation methods.

Similar Contracts

Same NAICS industry code

Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Chrome-Molybdenum Steel Pipe Fittings SupplyThe contract calls for the supply of four chrome-molybdenum steel butt-welding pipe elbows, each sized at 2-inch IPS with a 45-degree angle, rated for 600 PSI and constructed to Schedule 40 thickness, fully compliant with ASTM A234 Grade WP11 and ANSI B16.9 specifications. These fittings are critical components for high-pressure fluid handling systems requiring superior strength and corrosion resistance, and must be delivered in strict adherence to the outlined material and dimensional standards. The items are intended for deployment in defense-related infrastructure where reliability under extreme operating conditions is non-negotiable. Issued by the Fluid Handling Division within the Department of Defense, the contract is categorized as a subcontract posted on July 31, 2026, with responses due by August 5, 2026. The place of performance is designated as FPO, zip code 96677, indicating delivery to a military postal location, likely for overseas or remote operational use. The North American Industry Classification System code 332439 confirms the focus on other fabricated metal product manufacturing, aligning with the specialized nature of these pipe fittings. All bids must meet technical compliance without deviation, and timing is critical as the solicitation window is tightly constrained to five days.

FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

New Manufacture of Turbine Support Component (P/N 1386M20G04)The contract calls for the full-scale manufacturing of a precision turbine support component designated as P/N 1386M20G04 for the F110 engine, encompassing every phase of production from raw material procurement through final delivery. The work includes precision machining, controlled heat treatment, non-destructive testing, and rigorous inspection processes, all required to meet strict military quality standards. The component is critical to engine performance and must be produced with zero tolerance for deviation, ensuring reliability under extreme operational conditions. The contract is classified as a subcontract under NAICS code 332439 and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 31, 2026, with a firm deadline for responses on August 31, 2026, at 4:59 a.m. The place of performance is not specified, but the work must comply with all federal defense contracting requirements. All materials, processes, and final inspections will be subject to verification under military specifications to guarantee full airworthiness and operational readiness.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Directed Energy Weapon (DEW) Thermal Management R&DThe contract seeks the development of advanced thermal management systems tailored for high-power directed energy weapons, focusing on efficient waste heat dissipation while maintaining strict beam stability and uninterrupted operational readiness. This research and development effort demands innovative solutions that can handle extreme thermal loads without introducing mechanical distortion, optical misalignment, or latency in system response, ensuring sustained performance under continuous or pulsed high-energy operations. The technologies must be scalable, integration-ready, and capable of operating in diverse environmental conditions typical of military deployments. As a subcontract under the Department of Defense, this effort is driven by the Defense Advanced Research Projects Agency with a target completion deadline of September 30, 2026, and an initial posting date of July 31, 2026. The project falls under NAICS code 332439, indicating a focus on specialized metal forging and stamping activities related to precision components for defense systems. While no set-aside provisions or specific point of contact are detailed, the place of performance and organizational structure remain undefined, leaving flexibility for qualified subcontractors to propose locations and teaming arrangements that best meet technical requirements.

Defense Advanced Research Projects Agcy

POSTED

DEADLINE

in about 2 months

Waste Holding Tank SupplyThe contract calls for the supply of a corrosion-resistant, sealed waste holding tank designated by part number F6F6F6, specifically designed for integration into marine sanitation systems. The material and construction must meet strict durability standards to withstand prolonged exposure to saltwater, humidity, and harsh marine environments while maintaining complete seal integrity to prevent leaks or contamination. The item is classified under NAICS code 332439, indicating it falls within the category of other fabricated metal product manufacturing, and is beingprocured as a subcontract under the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Puget Sound. The solicitation was posted on July 31, 2026, with responses due by August 12, 2026, at 5:00 PM, leaving a limited window for qualified suppliers to submit proposals. Performance location details are not specified, but the nature of the component implies delivery to naval vessels or shore-based marine sanitation facilities operated by the U.S. Navy. All submissions must adhere to technical specifications ensuring compatibility, safety, and long-term operational reliability under demanding maritime conditions.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Waste Container Supply and DeploymentHouston Community College is seeking a vendor to supply and deploy a range of steel waste and recycling containers, from 35-gallon bins to 40-yard roll-offs, across multiple campuses within five days of contract award. The scope includes delivery, placement, and potential ongoing service to support recycling and waste management needs systemwide. The solicitation is classified as a subcontract under NAICS code 332439, and responses are due by August 31, 2026, with the opportunity posted on July 30, 2026. The contract is open to qualified suppliers capable of meeting strict timelines and handling logistics for large-scale container distribution across the college’s campus network. All work must be performed on-site at HCC locations, and the vendor must ensure compliance with operational and safety standards without delay.

HOUSTON CITY COLLEGE

POSTED

DEADLINE

in about 1 month

Manufacturing of Torch BodiesThe contract solicits the manufacturing of torch bodies to meet military specifications for integration with welding electrode assemblies, targeting a subcontractor with capability in precision fabrication under defense standards. The work is classified under NAICS code 332439, indicating a focus on other fabricated metal product manufacturing, and is being procured by the Defense Logistics Agency under the Department of Defense. Performance of the contract is designated for FPO with a zip code of 34087, suggesting logistical delivery to a military or overseas support location. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, providing a ten-day window for qualified vendors to submit proposals. The nature of the contract as a subcontract implies it is part of a larger prime contract framework, requiring compliance with DoD supply chain requirements, quality assurance protocols, and potentially export control regulations.

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Preservation Services

POSTED

DEADLINE

Military Packaging and Marking Compliance (MIL-STD-129)This contract requires full compliance with MIL-STD-129 for the packaging and marking of all shipments, ensuring that each item is labeled with accurate barcoding, proper handling codes, and adequate environmental protection to meet military standards. The work must be performed at the specified location in New Cumberland, Pennsylvania, with zip code 17070-5002, and all deliverables must align precisely with the technical requirements outlined in the standard to guarantee operational readiness and logistics efficiency. The contract is structured as a subcontract under the NAICS code 332439, and it is administered by the Fluid Handling Division of the Department of Defense. Proposals must be submitted by August 10, 2026, with the solicitation made public on July 30, 2026, and interested parties are directed to the DIBBS platform for further details and submission protocols.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of BLOCK, TACKLE (NSN 3940-01-709-0208)The contract requires the procurement and delivery of 27 units of BLOCK, TACKLE designated by NSN 3940-01-709-0208, fully compliant with military specifications. All aspects of the supply chain—including sourcing, packaging, marking, and inspection—must adhere to Defense Logistics Agency standards to ensure readiness and interoperability within DoD operations. The work is classified as a subcontract under NAICS code 332439, and the contracting authority is the Department of Defense through its Construction & Equipment Manu & Con organization. The solicitation was posted on July 30, 2026, with a response deadline of August 8, 2026, providing interested parties approximately ten days to submit proposals. Performance of the contract is expected to support DoD logistics requirements, though the specific place of performance is not defined. The contract opportunity is accessible through the DIBBS system under reference number SPE8EE26Q0412, and all deliverables must meet exacting quality control benchmarks to pass inspection prior to acceptance.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Metallic Tube Manufacturing and SupplyThe contract calls for the manufacturing and supply of metallic tubes identified by NSN 4710013743787, with all products required to meet stringent technical specifications set by the Defense Logistics Agency. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling and marking is mandatory to ensure uniformity, traceability, and readiness for military logistics operations. The work is classified as a subcontract under NAICS code 332439, indicating specialized metal product manufacturing, and is being procured by the Department of Defense through its Maritime Supply Chain ESOC Buys division. All proposals must be submitted by the response deadline of August 10, 2026, following the solicitation posted on July 30, 2026, with performance likely centered around Department of Defense logistics requirements. The procurement is managed through the DIBBS platform, and vendors must be prepared to meet all quality, documentation, and delivery standards expected for defense-grade components.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Wire Rope Assembly Manufacturing and SupplyThe contract calls for the manufacture and delivery of four wire rope assemblies identified by NSN 4010-01-707-2675, with all units required to meet rigorous military standards for quality, packaging, and marking. The work is being procured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, and the products must be delivered to the place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation falls under NAICS code 332439, indicating it relates to fabricated wire product manufacturing, and all deliverables must align with applicable defense specifications to ensure compatibility and reliability in operational environments. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, leaving a seven-day window for potential subcontractors to submit proposals. No set-aside designation has been specified, meaning any qualified entity may bid regardless of business size or classification. The contract information is accessible through the DIBBS system via the provided UI link, and while no point of contact is listed, bidders are expected to reference the official solicitation documentation for detailed technical and administrative requirements. All parties must ensure full compliance with military standards to avoid disqualification or rejection of deliverables upon inspection.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.

Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

Testing Laboratories and Services

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

Other Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

in about 1 month

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

CAP, PROTECTIVE, DUST AN

Solicitation # SPE7L1-26-Q-1420

The contract calls for the procurement of 47 protective dust and moisture seal caps with NSN 5340-01-684-3897, supplied by PALL AEROPOWER CORPORATION under part number 62RB114S0000, in compliance with stringent technical and quality requirements referenced from the DLA Master List and specific DLA directives including retention of supply chain traceability documentation per Procurement Note C03. The item is classified as a critical application requiring FAA airworthiness approval, with adherence to Drawing 13873 Rev 016843897 and Quality Assurance Provision 13873, and must meet sampling standards under MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified. Packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with each unit labeled with the NSN, contract number, lot number, contractor and manufacturer Cage codes, and part number, palletized per DLA packaging requirements. The contract is a firm fixed price with no variance allowed in quantity, and delivery is required within 37 days afteraward date to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at destination, and all documentation and traceability must be maintained by the contractor as mandated by DLA directives.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-823H

This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 24 hours ago

DEADLINE

SPRING, HELICAL, TORSION

Solicitation # SPE7L1-26-Q-1422

A solicitation has been issued for 12 helical torsion springs identified by NSN 5360-01-236-0286 under contract number SPE7L1-26-Q-1422, with a response deadline of August 14, 2026, and a posted date of July 31, 2026. The item falls under NAICS code 332613 and is being procured by the Department of Defense through the Land Supply Chain organization, with performance required in Greensboro, North Carolina, 27409. The delivery timeline is set for 193 days after award, and the solicitation is open to federal contracting with no set-aside restrictions specified. Primary point of contact for inquiries is Derek Roberts, reachable by phone at 614-907-3824 or email at derek.c.roberts@dla.mil, and additional details can be accessed via the official DIBBS platform.

Spring Manufacturing

POSTED

about 24 hours ago

DEADLINE

CHAIN ASSEMBLY, TIRE

Solicitation # SPE7L1-26-R-0099

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 24 hours ago

DEADLINE

in about 1 month

PLUG ASSEMBLY, SEALING

Solicitation # SPE7L1-26-Q-1417

The contract is for the procurement of four plug assemblies for sealing, identified by NSN 5340-01-324-8500, under solicitation SPE7L1-26-Q-1417, with a response deadline of August 7, 2026, and a required delivery within 202 days after award. The item is governed by DLA packaging and technical requirements incorporated through the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Offerors must comply with MIL-STD-130N for identification marking of U.S. military property and source control drawing requirements; only approved sources may supply the item, and non-approved offerors must obtain OEM source approval and submit documentation with their proposal. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and be approved by DLA to access controlled data. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All submissions must adhere to strict data handling protocols, and proprietary information must be safeguarded against unauthorized use or dissemination.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7L1-26-Q-1416

The contract pertains to the procurement of 17 units of PLUG, VENT with NSN 5340-01-288-7818 under solicitation SPE7L1-26-Q-1416, with a delivery requirement of 222 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire may access this data. DFARS 252.225-7048 governs compliance with these restrictions, applying uniformly to U.S. companies and their foreign subsidiaries. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance due at Tinker AFB, Oklahoma, and all solicitations must be submitted by August 7, 2026, following a July 31, 2026 posting. Primary point of contact is Vittorio Tambaro, reachable via email and phone provided.

Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE