Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Military Packaging, Preservation, and Marking Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of comprehensive packaging, preservation, and marking services for military shipments, strictly adhering to established military standards including MIL-STD-2073-1 for preservation and packaging, SPI 8429990 Rev H for specific procedural requirements, MIL-STD-129 for uniform labeling and marking of shipments, and ISPM-15 for the treatment and certification of wood packaging materials to prevent global pest spread. All services must ensure that military equipment and supplies are protected during transit, properly labeled for identification and logistics tracking, and compliant with international and defense-specific regulatory frameworks. The work will be performed in support of the Department of Defense under the Department of the Army, with no specified location for performance, indicating flexibility across multiple sites as needed. This subcontract opportunity is open for response until August 24, 2026, and is coded under NAICS 423840, which pertains to merchant wholesalers of industrial supplies and equipment. There is no set-aside designation specified, meaning it is open to all qualified contractors regardless of business size or status. The solicitation does not include a designated point of contact or detailed office address, suggesting that all formal communications and submissions will be managed through the official SAM.GOV portal linked in the posting. Contractors must demonstrate proven capability in handling military-class packaging operations and be prepared to meet rigorous quality control and documentation standards to ensure full compliance with the referenced standards.

General Info

Provide military packaging, preservation, and labeling per MIL-STD and ISPM-15 standards for DoD shipments.

Agency

Department Of Defense → Department Of The ArmyView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department Of The Army
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → Department Of The Army
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide packaging, preservation, and marking services for military shipments in accordance with MIL-STD-2073-1, SPI 8429990 Rev H, MIL-STD-129, and ISPM-15 for wood packaging.

Similar Contracts

Same NAICS industry code

NAICS: 423840
New
SLED
BEARINGS, BELTS AND DRIVE PARTSThe Trinity River Authority of Texas is seeking bids for its annual supply of bearings, belts, and drive parts under solicitation number 4450-024-I-27, with bids due on August 12, 2026, at 12:00 PM CST. The procurement is conducted through an online portal, requiring all respondents to register and submit their bids electronically; no physical submissions are accepted. The contract is open to both resident and nonresident vendors, but all bidders must comply with Texas-specific certifications including Resident Bidder Certification, HUB Status Certification, Conflict of Interest Disclosure, Boycott of Israel Compliance, Prohibition on Discrimination Against Firearm Entities, and Sanctions List Compliance under Texas Government Code sections 2252, 2270, 176, 808, 809, and 2274. While no federal FAR clauses apply, the solicitation enforces state-mandated legal obligations that bind offerors upon submission. All individuals seeking access to the secured facility for pre-bid or bid-opening events must register at least 24 hours in advance and present a valid government-issued photo ID; only specific forms of identification are accepted, ranging from Texas driver’s licenses and U.S. passports to military IDs and permanent resident cards. The place of performance is limited to the state of Texas, though no FOB terms, delivery schedule, or packaging specifications are outlined. The contract type, estimated value, pricing details, and evaluation factors are not provided, and no technical specifications for the parts are included beyond the general category of bearings, belts, and drive components. Awards will be determined based on compliance with state certification requirements and procedural adherence, as no formal criteria for price, quality, or technical merit are disclosed. The primary point of contact for inquiries is Joel Perez at pierzj@trinityra.org.
Trinity River Authority of Texas

POSTED

3 days ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Defense → Department Of The Army

Same awarding agency

NAICS: 541611
New
Federal
OPSEC and CUI Compliance AdministrationThe contract requires providing administrative support to the OPSEC Coordinator to ensure full compliance with operational security and Controlled Unclassified Information handling standards, including the accurate tracking of training completion and timely submission of certification documentation. All activities must adhere to federal guidelines for safeguarding sensitive but unclassified information and maintaining security protocols across operations. The work is structured as a subcontract under the Department of the Army, with performance tied to Department of Defense requirements, and the North American Industry Classification System code 541611 indicates it involves management consulting services related to security and compliance. The solicitation was posted on July 24, 2026, with responses due by August 24, 2026, and the place of performance and point of contact details are not specified, suggesting flexibility or classification around location and direct liaison. The contract does not indicate a set-aside type, meaning it is open to any eligible subcontractor, and no office address details are provided, which may imply remote or multi-site execution. Successful performance hinges on rigorous attention to compliance timelines, documentation accuracy, and adherence to DoD OPSEC and CUI policies without exception.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 541611
New
Federal
Technical Data Management and Configuration Control ServicesThe contract for Technical Data Management and Configuration Control Services requires the preparation and submission of specific configuration management deliverables, including Engineering Change Proposals, Request for Verification, Notice of Release, and Acceptance Inspection End reports, all in strict alignment with the SAE-EIA-649-1 standard and applicable Department of Defense forms. These deliverables are critical to maintaining accurate and controlled technical data throughout the lifecycle of defense-related systems and must be completed with precision to ensure compliance with federal configuration management requirements. This subcontract is issued under the Department of the Army, part of the Department of Defense, and is categorized under NAICS code 541611, which pertains to administrative management and general management consulting services. The solicitation was posted on July 24, 2026, with a response deadline of August 24, 2026, at 9:00 PM. The performance location and point of contact details are not specified, and no set-aside designation is indicated, meaning the opportunity is open to all eligible contractors without preference. The work supports the Army’s broader technical data integrity and configuration control needs and is accessible via the SAM.gov platform.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 541380
New
Federal
First Article Testing (FAT) and Test Reporting ServicesThe contract requires the performance of First Article Testing (FAT) on storage racks to ensure compliance with military specifications, including both physical and functional evaluations conducted in accordance with established military protocols. The successful vendor must execute a thorough testing regimen to verify dimensional accuracy, load-bearing capacity, structural integrity, and operational functionality of the storage rack units. Upon completion, a formal First Article Test Report (FATR) must be generated and submitted as a Contract Data Requirements List (CDRL) item designated as A005, documenting all test procedures, results, and compliance determinations. This deliverable serves as the official record of conformance and must be precise, complete, and aligned with federal defense quality standards. The opportunity is issued as a subcontract under the Department of Defense, specifically managed by the Department of the Army, with a NAICS code of 541380 indicating it falls under engineering services. The solicitation was posted on July 24, 2026, with a firm response deadline of August 24, 2026. While the specific place of performance and point of contact are not detailed, the work is expected to support defense logistics infrastructure and must meet stringent military reliability and documentation requirements. The absence of a set-aside designation suggests this opportunity is open to all qualified subcontractors without restrictions based on size or status.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
Federal
BOAST RFOP M11 Pistol Small Arms Storage Rack NSN 1095-00-897-8755The U.S. Army Contracting Command – Detroit Arsenal is soliciting offers to establish Basic Ordering Agreements (BOAs) under the BOAST program to support the acquisition of Class IX supply parts for Army equipment maintenance, excluding medical-peculiar items. These BOAs are not contracts and do not obligate funding, but serve as pre-negotiated frameworks to streamline future order awards under FAR Parts 12, 13, or 15 for commercial, simplified, or negotiated acquisitions. The BOAs will cover a broad spectrum of Class IX subsystems including air, ground support, administrative vehicles, electronics, tactical and special weapons, missiles, industrial materiel, and aircraft engines, organized into designated subclasses. Offerors must be registered in SAM.gov and certified under the U.S./Canada Joint Certification Program to access the controlled Technical Data Package, which includes engineering drawings, quality assurance provisions, and configuration management standards aligned with SAE-EIA-649-1 and DD Forms 1423, 1692, 1694, and 1695. Compliance with packaging requirements per MIL-STD-2073-1 and SPI 8429990 Rev H, along with marking standards under MIL-STD-129 and ISPM-15 for wood packaging, is mandatory. Deliverables include the First Article Test Report, Acceptance Inspection Equipment Report, Notice of Revision, and Request for Variance as CDRLs, with acceptance occurring at the origin for supplies and destination for FATR. Performance timelines require delivery within 300 days of order receipt, with FAT completed within 120 days and remaining production within 150 days after FAT approval. FOB destination terms apply, with all shipments directed to DLA Distribution Anniston. The evaluation is strictly price-based under a Lowest Price Technically Acceptable model, with no technical or past performance scoring. A non-priced option allows for 117 additional storage racks to be exercised within 365 days of base award. Contractors must comply with OPSEC, CUI handling procedures requiring training and designation of an OPSEC coordinator, and cybersecurity requirements under NIST SP 800-171 and DFARS clauses. All proposals must be submitted electronically via Excel using the official template within the specified deadline, with no narrative content permitted beyond the form fields.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details