Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Spec Packaging and Expedited Shipping

Active

Federal

Response Deadline09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract under the Department of Defense Land Supply Chain involves providing specialized military packaging and expedited transport services for prime contractors on DLA supply contracts. The contractor is responsible for executing packaging and preservation according to MIL-STD-2073-1E and RP001 standards, while ensuring all markings comply with MIL-STD-129. The scope of work requires the transport of gear via the fastest traceable means to the Bulk Break Point at Fort Bliss, Texas, specifically excluding the use of parcel post. This performance is categorized under NAICS code 488510, with a response deadline set for September 14, 2026.

General Info

Military packaging and expedited transport to Fort Bliss, Texas, by September 14, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

488510 - Freight Transportation ArrangementView NAICS

Place of Performance

FORT BLISS, TX, 79918-0000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-05W0.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GEAR, INTERNAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 1

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military packaging and expedited transport for prime contractors on DLA supply contracts. Executes packaging per MIL-STD-2073-1E and RP001 using specified preservation and cushioning materials. Applies markings per MIL-STD-129. Transports the gear via fastest traceable means to Fort Bliss, TX, excluding parcel post. Delivers a compliant, military-marked package to the Bulk Break Point.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Hazardous Material Shipping

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Logistics and Transportation Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

Marine Hardware Packaging and Shipping

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 17 hours ago

DEADLINE

Specialized Military Packaging and Palletization Services

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 2 months

DLR and SMIC Compliant Packaging Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

DLA Compliant Palletization and Shipping

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization Services

FLUID HANDLING DIVISION

POSTED

DEADLINE

DLA Compliant Packaging and Palletization

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-STD-129 Packaging and Palletization Services

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Supply of Nonmetallic Bumpers (NSN 5340-01-148-8935)

Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

FITTING, BREECH

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

CONTRACTOR FIRST ARTICLE TEST

Solicitation # SPE7L1-26-Q-1635

The Department of Defense Land Supply Chain has issued solicitation SPE7L1-26-Q-1635 for a Contractor First Article Test. This federal requirement is for 88 units of part number 0001S00000053, with a specified delivery timeline of 203 days after the order is received. The project falls under NAICS code 332613 and will be performed in Texarkana, Texas. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties can coordinate through the primary point of contact, Adam Howell, or access further details via the DIBBS portal.

Spring Manufacturing

POSTED

about 12 hours ago

DEADLINE

BODY, VALVE, BYPASS

Solicitation # SPE7L1-26-T-09K8

This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of two bypass valve body assemblies used on shop vans under part number 2520-00-475-1278. The contract requires delivery within 333 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, and the acquisition falls under NAICS code 336350. The contract mandates strict adherence to cybersecurity and quality standards, including CMMC Level 2 certification and specific DLA master list technical requirements. It includes rigorous controls regarding covered defense information, configuration change management, and inspection at origin. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to access the data.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-10U2

Solicitation SPE7L1-26-T-10U2 is a request for quotations issued by the Defense Logistics Agency for the procurement of 46 nonmetallic bumpers, identified by NSN 5340-01-148-8935. This is designated as a critical application item with a non-extendable shelf life of 60 months. The procurement incorporates specific technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to AMS 5513 for metallic components. The required delivery date is February 22, 2027, with a need ship date of January 16, 2027, for delivery to the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates destination inspection and acceptance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials and shelf-life marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Offerors must submit quotes via the DIBBS system by September 21, 2026.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Vehicular Windows (P/N 18-57403-005)

Other Motor Vehicle Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacture of Access Covers (NSN 5340-00-771-8370)

Sheet Metal Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

Manufacturing and Supply of Mounting Brackets (NSN 5340014631833)

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Quick Release Pins

Other Fabricated Wire Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Damper Bracket Assembly Supplier

Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

Supply of Clamping Catches (NSN 5340-01-226-4845)

Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS