Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military-Spec Packaging and Palletization Services

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Military-Spec Packaging and Palletization Services supports prime contractors on projects for the DLA Weapons Support Fluid Handling Division. The scope of work involves the professional packaging, marking, and palletization of materials in strict accordance with MIL-STD-2073-1E and MIL-STD-129, specifically adhering to QUP:001 and Pres Mthd:42 requirements. The contractor is responsible for utilizing approved MIL-SPEC wraps, preservatives, and containers to ensure all shipments are fully prepared for destination inspection. All completed shipments must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and is managed under the Department of Defense. Interested parties should note the response deadline of November 16, 2026.

General Info

Military-spec packaging and palletization services for DLA, due November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

488510 - Freight Transportation Arrangement

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-27-T-0991.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STRAINER ELEMENT, SEDIM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs packaging, marking, and palletization for prime contractors on DLA Weapons Support Fluid Handling Division projects. Executes packing and marking per MIL-STD-2073-1E and MIL-STD-129, including QUP:001 and Pres Mthd:42 requirements. Utilizes MIL-SPEC wraps, preservatives, and containers for transport to the DDSP New Cumberland Facility. Delivers fully packaged and marked shipments ready for destination inspection.

Similar Contracts

Same NAICS industry code

Freight and Delivery ServicesThis subcontract for Freight and Delivery Services involves the transportation and delivery of industrial components for prime contractors supporting City of Tampa equipment procurement projects. Specifically, the contractor is responsible for managing the shipping and handling of eight specialized steel wheel kits, utilizing standard commercial freight and logistics methods to ensure delivery to the designated site. The project is associated with the Wastewater agency in Florida and falls under NAICS code 488510. The solicitation was posted on November 5, 2026, with a response deadline of November 12, 2026.

POSTED

about 18 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract provides specialized packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to military standards, specifically performing packaging according to ASTM D3951, marking and labeling per MIL-STD-129, and palletization per RP001. To ensure compliance, the provider must utilize MIL-SPEC packaging materials and specialized labeling equipment. The operational objective is the delivery of packaged and palletized components via FOB Origin shipment to DLA Distribution San Diego. This project falls under NAICS code 488510, with the primary place of performance located in San Diego, California. Interested parties should note the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense agency DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work involves performing specialized military-grade packaging and marking, specifically adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the use of MIL-DTL-117 waterproof, greaseproof, and opaque bags for UV-susceptible items, the implementation of Do Not Bend handling protocols, and the final delivery of gaskets packaged for DLA Distribution. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Active Devices Division. The scope of work involves providing specialized military packaging and marking for prime contractors, specifically requiring the packaging of 56 units according to MIL-STD-2073-1E and marking shipments in compliance with MIL-STD-129. Additionally, the contractor must execute palletization following RP001 DLA Packaging Requirements and manage materials per IP025. The final deliverables are to be delivered to DLA Distribution New Cumberland in Pennsylvania. This opportunity falls under NAICS code 488510, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Defense Packaging and Shipping ServicesThis subcontract for Defense Packaging and Shipping Services involves providing specialized military-grade packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 111 retaining rings in strict accordance with MIL-STD-129, RP001, and ASTM D3951 standards, utilizing approved MIL-SPEC materials and labeling equipment. The contractor is responsible for coordinating FOB Origin shipping to the DLA Distribution Depot Oklahoma located at Tinker AFB. This project falls under NAICS code 488510 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Maritime ComponentsThis subcontract involves providing specialized military-grade packaging and marking services for the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for preparing five seal assemblies for delivery to DLA Distribution San Joaquin in Tracy, California. All work must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, utilizing approved MIL-SPEC crates, cushioning, and moisture barriers to ensure components are ready for FOB Origin shipment. The opportunity is categorized under NAICS code 488510 and was posted on November 5, 2026, with a response deadline of November 16, 2026. This project supports prime contractors in meeting Department of Defense requirements for the secure transport of maritime components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 75 bushings using military-specification preservatives and cushioning in strict accordance with MIL-STD-2073-1E and SPI #AM12524213. Additionally, the contractor must apply markings per MIL-STD-129 and ensure all items are palletized according to RP001 standards. The final deliverables are to be transported to DLA Distribution DDSP New Cumberland, located in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and PreparationThis subcontract involves providing specialized military-grade packaging and crating services for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work focuses on the preparation of precision engine components, specifically two shafts, for international transit to Karachi, Pakistan. All work must strictly adhere to MIL-STD-2073-1E and DLA RP001 requirements to ensure the integrity of the components during freight forwarding. To prevent damage and degradation during transport, the contractor is required to utilize specific protective measures, including moisture barriers, cushioning, and corrosion inhibitors. The final deliverables must be securely packaged and labeled according to international shipping standards. This project falls under NAICS code 488510 and is intended for prime contractors managing DLA Weapons Support projects.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 19 hours ago

DEADLINE

Military Specification Packaging and Shipping ServicesThis subcontract for Military Specification Packaging and Shipping Services supports the DLA Weapons Support Maritime Supply Chain. The scope of work involves providing military-grade packaging, marking, and transportation for critical filter elements on behalf of prime contractors. Specific technical requirements include fabricating bags according to MIL-B-117, packaging items per MIL-STD-2073-1E, and ensuring all marking adheres to MIL-STD-129. The contractor is responsible for coordinating FOB Destination delivery to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This effort falls under NAICS code 488510 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Active Devices Division. The scope of work involves providing specialized military-grade packaging and marking for electronic components on behalf of prime contractors. All deliverables must adhere to strict regulatory standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and IPC/JEDEC J-STD-609 for individual unit pack marking regarding lead and lead-free attributes. The final objective is the delivery of fully processed shipments ready for receipt at the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Active Devices Division projects. The scope of work involves performing specialized packaging and marking of items according to RP001 and ASTM D3951 standards, with marking conducted in accordance with MIL-STD-129. Additionally, the provider must handle hazardous materials following TQ requirement IP025 and FED-STD-313 when applicable. The final deliverables consist of palletized assemblies ready for shipment to DLA Distribution DDSP New Cumberland. This requirement falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Metallic Hose and Ferrule SupplyThis HUBZone set-aside subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, involves the supply of raw metallic tubing and precision-machined ferrules. The materials must consist of high-grade metallic alloys that adhere to STA 563.89 engine feed requirements. To ensure compliance with DLA technical specifications, the provider is required to furnish all necessary material certifications and Mill Test Reports. The scope of work requires the delivery of these components directly to prime contractors who are fulfilling DLA supply contracts. Performance for this contract is centered at Hill AFB. Interested parties should note the response deadline of November 16, 2026, for this procurement categorized under NAICS code 332510.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Metallic Hose Assembly Fabrication (Engine Feed)This HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the manufacture and supply of a metallic engine feed hose assembly for prime contractors. The scope of work involves fabricating the hose to a precise length of 45.45 inches with a tolerance of 0.45 inches, installing ferrules, and conducting a mandatory three-minute pressure test. All finished assemblies must be marked and labeled in accordance with MIL-STD-129, specifically including shelf-life information. The project necessitates the use of precision cutting tools and specialized pressure testing apparatus to ensure compliance with technical specifications. Performance will take place at Hill AFB, and the final deliverable is the completed Hose Assy - Engine Feed, STA 563.89 with ferrules installed. Interested parties must respond by November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Gasket Supply (NSN 5330011330920)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the manufacture or sourcing of 277 specialized gaskets. The components must match General Dynamics part number 44108-C or Melrath Gasket Co part number 3117. To ensure quality and longevity, all items must be individually packaged in medium duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration. The contractor must adhere to strict regulatory standards, including MIL-STD-129 for shipment and storage marking and DFARS 252.225-7001. Performance for this contract is centered in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, regarding this requirement for NSN 5330011330920.

All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments and coatings for Pump Cover P/N DS-922542. Working under the DLA Weapons Support Fluid Handling Division of the Department of Defense, the contractor is responsible for applying protective coatings, plating, or finishes that adhere to the DLA Master List of Technical and Quality Requirements. The work requires the use of industrial plating or anodizing equipment to ensure all components meet strict corrosion and wear specifications before final delivery. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 19 hours ago

DEADLINE

Supply of Certified Aerospace Raw MaterialsThis subcontract involves the supply of certified aerospace raw materials, including raw billets, castings, or forgings, to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The materials are specifically required for the manufacture of Pump Cover P/N DS-922542 and must strictly adhere to established aerospace specifications. The selected provider is responsible for delivering essential documentation with the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with 29 CFR 1910.1200(g). Performance for this contract is centered at Hill AFB, with a response deadline set for November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 19 hours ago

DEADLINE

Precision Machining and Assembly of Pump CoversThis subcontract involves the precision machining and assembly of five Pump Cover Assemblies, specifically part number DS-922542 under NSN 1650-00-790-9720, for the Department of Defense DLA Weapons Support Fluid Handling Division. The work must be performed at Hill AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, utilizing CNC machining and specialized inspection equipment for Critical Application Items. Quality assurance is a primary requirement, with mandatory sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Precision Casting and Forging for Fuel Pump ComponentsThis subcontract involves the precision casting and forging of raw structural components for fuel pump parts, specifically identified by NSN 2910003557669, to support prime contractors under DLA supply contracts. The selected provider will utilize industrial casting furnaces or forging presses to produce high-grade alloy blanks according to strict technical specifications, which are then delivered to the prime manufacturer for final machining. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the project is categorized under NAICS code 332997 and requires full compliance with Buy American regulations. Performance will take place in Albany, and the solicitation period runs from November 5, 2026, through November 16, 2026.

Industrial Pattern Manufacturing

POSTED

about 19 hours ago

DEADLINE

Engine Fuel Pump Kit Fabrication and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the fabrication and supply of 18 complete parts kits for engine fuel pumps, identified by NSN 2910003557669. The scope of work requires precision fabrication of components and kit assembly utilizing specialized tooling, casting, and forging processes to support prime contractors on DLA supply contracts. The contractor must ensure strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for all packaging and marking requirements. Additionally, a CMMC Level 2 self-assessment is mandatory for compliance. Performance of the contract will take place in Albany, Georgia, under NAICS code 333611.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 19 hours ago

DEADLINE

Cadmium Plating Services for Steel FittingsThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating on 128 steel street elbows to ensure they meet strict corrosion resistance specifications. All work must be performed in compliance with hazardous materials labeling standards per 29 CFR 1910.1200 and requires the necessary environmental permits for cadmium processing. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the finished cadmium-plated steel elbows as required by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 19 hours ago

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

International Defense Logistics and Export Shipping

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

DLA Compliant Packaging and Palletization Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Hazardous/Military Material Packaging and Freight

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Marking Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Marking Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

Aerospace Component Packaging and Marking

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS