Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on August 13, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Mill Creek Maintenance Building Interior

Closed
W912EF20B0009Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237990
New
SLED
Carlson Field Athletic Complex: Construction of new Pickleball Courts
Solicitation # BCP-REC-26
The Town of Hingham, Massachusetts, is soliciting sealed bids for the construction of eight new pickleball courts at the Carlson Field Athletic Complex located at 28 Bare Cove Park Drive. This fixed-price lump sum project has an estimated construction cost of $1,300,000. The scope of work includes site preparation such as the removal of trees, shrubs, and stumps, re-grading the site, and the installation of the courts, posts, nets, walkways, benches, shade shelters, and ADA pathways. Additionally, the contractor is responsible for a new asphalt parking lot and the installation of solid AF-6 Acoustifence Panels around the entire perimeter for sound attenuation. The contractor must coordinate with the Town and the demolition contractor, Pasquazzi Bros, Inc., and is responsible for maintaining construction fencing and erosion control throughout the project duration. The contract will be awarded to the lowest responsible and eligible bidder who possesses at least seven years of experience constructing sports courts or paved athletic facilities. Bidders must submit their proposals electronically via the OpenGov portal by November 3, 2026, including a 5% bid security and a Statement of Qualifications with at least three similar public project references. Awarded contractors must provide a payment bond equal to 50% of the total project cost and adhere to Massachusetts prevailing wage laws, OSHA regulations, and the Massachusetts Building Code. The project includes a minimum one-year warranty for labor and a two-year warranty for materials. Final payment is contingent upon the submission of AIA affidavits for the payment of debts and release of liens.
Recreation

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 237990
New
SLED
Pre-Qualification For Construction Of Park, Recreation & Libraries Parks And Facilities For 2027
Solicitation # 13-202
Solicitation 13-202 is a pre-qualification process issued by the City of Roseville, California, for the construction of park, recreation, and library facilities scheduled for 2027. The objective is to identify qualified contractors with the capacity and experience to execute new park construction and rehabilitation projects. Interested parties must submit their pre-qualification packages via email to the City Clerk’s Office by 3:00 p.m. on November 23, 2026. Submissions are limited to 25 megabytes and must include a signed questionnaire, DIR registration for all contractors and subcontractors, and current workers' compensation certificates of insurance. To achieve pre-qualified status, applicants must meet essential qualifications, including a valid California Contractor's license and specific insurance limits of 1,000,000 dollars per occurrence and 2,000,000 dollars aggregate. Experience requirements mandate the completion of at least six new park construction projects for public agencies within the last three years, with a maximum of three rehabilitation projects allowed toward this total. Financial solvency is verified through third-party credit checks, where a score of 650 or less may lead to disqualification. Evaluation also considers compliance with California apprenticeship laws, Davis-Bacon prevailing wage requirements, and CAL OSHA safety standards.
City of Roseville, Parks, Recreation & Libraries Department (PRL)

POSTED

about 4 hours ago

DEADLINE

in 25 days

General Info

NAICS

237990 - Other Heavy and Civil Engineering Construction

Place of Performance

Walla Walla, WA, 99362, USA

Set-Aside

WOSB

Documents

4

B.08.02+20B0009_Plans.pdf

PDF

B.08.02+20B0009_TechSpecs.pdf

PDF

B.08.02+Solicitation+W912EF20B0009.pdf

PDF

Site+Visit+Info+W912EF20B0009.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates
PhaseClosed
Posted

Presolicitation

Deadline changed

Response deadline changed from Jun 23, 2020 to Sep 15, 2020.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
Contacts1 person available
OfficeWALLA WALLA, WA, 99362-1876, USA
Office AddressWALLA WALLA, WA, 99362-1876, USA
Contacts
David BooneContract Specialist

Full Description

Show more
The U.S. Army Corps of Engineers (USACE) Walla Walla District intends to issue a construction solicitation for a project titled Mill Creek Maintenance Building Interior. The work is located near Walla Walla, Washington. The performance of work for the Mill Creek Maintenance Building (Square feet: 1st floor 1,270 ft & 2nd floor 864 ft) shall consist of the following: construction of interior walls (1st floor only) to provide the following project work space areas: vehicle maintenance bay (VMB), work shop, storage, rest room, and laundry. The contractor shall renovate electrical receptacles in the Shop and Mezzanine areas, change the configuration of lighting fixtures, lighting circuits, and light switch controls. Existing lighting within the shop and storage areas shall remain but separate lighting controls shall be provided. The contractor shall also provide recess lighting within the drop celling (sheet rock) areas of the rest room and the laundry room. The contractor shall provide shop and mezzanine floor mounted, non-movable, work benches with pull out drawers and cabinets above and below the benches. A Heating, Ventilation and Cooling (HVAC) system shall be provided in the form of split units. Two separate HVAC systems will be required, one for the first floor and the other for the second floor and VMB. Also the contractor shall provide a floor mounted non movable welding bench and a welding exhaust system with in the VMB. Exterior to the building the contractor shall demolish and construct an asphalt roadway 200 feet long by approx. 17 feet wide. The contractor shall slope the new asphalt roadway towards and provide a - V shape concrete collection channel valley to convey water to a drainage recharge depression. The contractor shall provide all plumbing piping and connections within the building, including: interior water feeder piping (hot and cold), sewer pipe line, drain pipe lines and their connection. Existing sewer line and drain pipe lines are within the concrete slab floor. Provide a mop sink within the laundry room and rest room fixtures (sink, toilet, mirror and wall mounted cabinet). Provide and install an electrical instance hot water heater and hot water reservoir tank. Provide exterior water feeder line connection by trenching from an existing capped water line to the capped incoming building water line. Provide exterior connections from a capped drain line to a contractor provided and installed oil/water separator and holding tank. The contractor shall provide and install a septic tank with a lift station capability to pump sewage 150 feet to another existing septic tank/lift station. Construction shall be completed within 11 months (335 days) after Notice to Proceed. Settlement and Measurement Instrumentation locations will be marked in the field and special care will be taken during construction operations to NOT DISTURB the instrumentation. The solicitation will be issued as an Invitation for Bids (IFB). The Government will include options in the solicitation. This acquisition will result in a single firm fixed-price contract. This procurement is a Women-Owned Small Business (WOSB) set-aside. Competition is restricted to women-owned small business concerns. A small business subcontracting plan is not required. Performance and payment bonds will be required for this project. The NAICS code for this procurement is 237990-- Other Heavy and Civil Engineering Construction. The small business size standard is $39.5 million. The Magnitude of Construction is between $250,000 and $500,000. The solicitation will be made available for download on the beta.sam.gov Contract Opportunities website in late May 2020. Bidders are responsible for checking the referenced page for any updates to the Notice. The Government is not responsible for any loss of Internet connectivity or for a bidder's inability to access the documents posted at the referenced website. A public bid opening will be held approximately 30 days after the solicitation is posted. The exact bid opening date will be indicated in the solicitation. The apparent low bidder will be requested to provide responsibility criteria in accordance with FAR Subpart 9.1. System for Award Management (SAM): Offerors must register in the SAM at https://www.sam.gov/portal/public/SAM/ prior to receiving an award. Point of contact for this procurement is David Boone, Contract Specialist at +1 (555) 000-0000 or contact@example.gov. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THE SOLICITATION EITHER BEFORE OR AFTER THE CLOSING DATE. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS PRE-SOLICITATION NOTICE OR ANY FOLLOW-UP INFORMATION REQUEST.

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 332812
New
Federal
Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation
Solicitation # W912EF27QA0020001
The US Army Corps of Engineers, Walla Walla District, is soliciting offers for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at the Dworshak Dam. This small business set-aside project requires the contractor to provide all personnel, materials, equipment, and transportation to move the bulkheads from Dworshak Dam to a repair facility and back. The scope of work includes existing coating removal, weld inspection and repair according to AWS D1./D1.M standards, and the application of new coatings in compliance with SSPC SP 5/NACE No. 1 and Section 09 97 02.00 28 for hydraulic structures. The government provides the bulkheads as government furnished property, with each unit having an estimated value of 850,000 dollars. The project is structured in three phases, with each phase involving two top and two bottom bulkheads. Performance is scheduled between November 23, 2026, and July 5, 2027, with specific pickup and return windows for each phase. Deliveries and retrievals must be coordinated 15 days in advance and occur Monday through Thursday. Key requirements include a one-year warranty on the coating system, the submission of general inspection reports within five business days of each inspection, and the provision of manufacturer safety data sheets and CERL Lab certification for all paint materials. The contractor must also ensure all paint is stored and packaged according to strict safety and stability guidelines to prevent degradation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 811310
Federal
LLA Fish Pump - Motor Rewind
Solicitation # W912EF27QA006
Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

7 days ago

DEADLINE

in 25 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS