This Government Contract opportunity from Pennsylvania was posted on February 7, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Minority-, Women-, or Disabled-Owned Business (MBE/WBE/DSBE) Supply Participation

Closed

State & Local

Submission Closed03/27/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325510

New

SLED

Traffic Paint & Marking Consumables

POSTED

DEADLINE

Polyurethane Coating Material SupplierThis subcontract with the Defense Logistics Agency involves the supply of black two-component polyurethane coating touch-up pens, specifically NSN 8010015603448, for prime contractors. The requirement consists of one box of 24 pens delivered FOB Destination to Travis AFB. The supplier must adhere to strict packaging and marking standards including RP001, IP025, MIL-STD-2073-1E, and MIL-STD-129, while performing quality sampling according to MIL-STD-1916 or ASQ H1331. Additionally, the contractor is required to comply with DFARS 252.225-7001 Buy American standards.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Temporary Paint (NSN 8010-01-706-8641)

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0237

Solicitation SPE8ES-27-T-0237 is a request for the procurement of 30 kits of temporary paint, identified by NSN 8010-01-706-8641. The contract is issued by the DLA Troop Support Construction and Equipment office and is designated as a total small business set-aside under NAICS code 325510. The required delivery date is November 2, 2026, with delivery, inspection, and acceptance all occurring at the destination point of Tinker AFB, Oklahoma. Shipments must be made via the fastest traceable means, and the use of parcel post is strictly prohibited. The materials are classified as hazardous, requiring strict adherence to the Hazard Communication Standard 29 CFR 1910.1200, including the submission of Safety Data Sheets and specific labeling. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Additionally, the items are subject to a non-extendable 12-month shelf life. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the safeguarding of covered defense information.

POSTED

DEADLINE

LATCH, DOOR, VEHICULAR

Solicitation # SPE7L4-27-T-0709

This solicitation, issued by DLA Weapons Support LSO Combat Vehicles and Armament, is a small business set-aside for the procurement of one vehicular door latch assembly, specifically the rear right-hand assembly, under NSN 2540015696478. The required delivery date is November 3, 2026, with delivery terms set as FOB Destination Other, shipping to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Columbus, Ohio. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It explicitly prohibits the use of Class I ozone-depleting chemicals and restricts the use of additive manufacturing unless specifically authorized. Compliance with the Buy American Act and DFARS cybersecurity standards, including safeguarding covered defense information, is required. Inspection and acceptance will take place at the point of origin, and electronic invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0234

Solicitation SPE8ES-27-T-0234 is a procurement request by the Defense Logistics Agency for one kit of white polyurethane coating, identified by NSN 8010-01-692-1311. The material is designated as a critical application item with a 12-month extendable shelf life. Delivery is required within 10 days after receipt of the order, with a final required delivery date of November 2, 2026. The shipment is FOB Destination to the Central Receiving and Shipping Point at Fort Rucker, Alabama. The contract mandates strict quality and compliance standards, including supply chain traceability per DLA Directive C03 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Because the material is hazardous, the contractor must adhere to IP025 for packaging and shipping, and ensure labeling complies with the Hazard Communication Standard and MIL-STD-129. Packaging must follow MIL-STD-2073-1E and RP001 requirements. Payment and invoicing are to be processed electronically via the Wide Area Workflow system. Key regulatory clauses include the Buy American Act, the Berry Amendment, and various DFARS requirements regarding cybersecurity and the prohibition of certain telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0231

Solicitation SPE8ES-27-T-0231 is a procurement by the Defense Logistics Agency for one box of black polyurethane coating, specifically 10cc two-component touchup pens (SEMPEN) under NSN 8010015603448. The item must adhere to FED-STD-595 color number 37038 and is classified as a critical application item with a non-extendable shelf life of six months. Delivery is required within five days of order to the Hazardous Material Element at Travis AFB, California, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including supply chain traceability documentation and hazardous material communication standards that prohibit the intentional addition of mercury. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and RP001, with specific requirements for hazardous material labeling per 29 CFR 1910.1200. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

INSULATING COMPOUND KIT, ELECTRICAL

Solicitation # SPE4A6-27-R-X146

Solicitation SPE4A6-27-R-X146 is an Indefinite Delivery Purchase Order (IDPO) issued by the DLA Weapons Support ASC Commodities Division for the procurement of electrical insulating compound kits. The contract is a small business set-aside with a base period of five years, during which delivery orders may be placed. The primary requirement is for 50 kits (with a guaranteed minimum of 25 for the base year) of International Paint LLC part number 683-3-2. Each kit must contain 2.0 quarts of base component and 1.0 quart of curing agent packaged separately within a single container. The items are critical application components with a non-extendable shelf life of 60 months. The contract mandates strict adherence to quality and safety standards, including the submission of SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Packaging and marking must comply with MIL-STD-2073-1 Appendix D and MIL-STD-129, with specific requirements for cushioning and the inclusion of a detailed contents list. Inspection and acceptance are conducted at the origin, and the required delivery lead time is 160 days after receipt of order. Pricing is based on a firm-fixed-price model, and the award will be determined based on best value, weighing price, past performance, and delivery schedules.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Roof Waterproofing Material Supply

Leicester City Council

POSTED

DEADLINE

Commercial-Grade Athletic Floor Finish Supplier

POSTED

DEADLINE

Roofing Material Supply

Finance Facilities/Support Svc

POSTED

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 5 days

AI Contract Overview

This subcontracting opportunity is issued by Philadelphia Citywide in Pennsylvania to increase the participation of certified Minority-, Women-, or Disabled-Owned Business Enterprises (MBE, WBE, or DSBE) within the supply chain. The scope of work focuses on the procurement of paints, chemicals, and related products, specifically designed to help prime contractors fulfill city-mandated subcontracting goals. The solicitation was posted on February 7, 2024, with a response deadline of March 27, 2024. It falls under NAICS code 325510, targeting specialized suppliers capable of providing the necessary materials to support larger municipal projects.

General Info

Agency

Pennsylvania → Philadelphia Citywide

NAICS

325510 - Paint and Coating Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of B2419922.

The full solicitation package (13 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Automotive Paints and Related Supplies

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 7

subcontract

Response DeadlineMar 27

Deadline has passed

Submission Closed

03/27/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyPennsylvania → Philadelphia Citywide

ContactsNo contacts available

OfficeN/A

Organization / AgencyPennsylvania → Philadelphia Citywide

Office AddressN/A

ContactsNo contact information available

Full Description

Certified MBE, WBE, or DSBE supplier participation in the supply chain for paints, chemicals, or related products to support prime contractor in meeting city-mandated subcontracting goals.