Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Mobile Delvac Oil - Dredge Wheeler

Active
W912P818T0058Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of specific brand name Mobil Delvac oil products by the US Army Corps of Engineers, New Orleans District, under an unrestricted solicitation governed by NAICS Code 324191. The contract is firm fixed price and open to all qualified businesses. The requirement includes delivering 4,500 gallons of Mobil Delvac 1640 SAE 40 oil by truck to the Dredge Wheeler at the USACE New Orleans District dock by June 19 at 8:00 a.m., with the vendor providing 250 feet of hose for vertical lift and a pumping capacity of at least 250 gallons per hour. The vessel has a 2-1/2 inch quick disconnect fitting, and the vendor must comply with US Coast Guard over-water transfer regulations. Additionally, 16 drums (55 gallons each) of Mobil Delvac 1300 15W-40 oil must be delivered to the same location any time between June 13 and June 19, 2018, no later than June 19 at 8:00 a.m. Interested vendors must monitor FedBizOps for the solicitation documents and any amendments, as no paper copies will be issued, and requests for solicitation packages via phone, email, or fax will not be honored. Offerors are encouraged to register as Interested Vendors on FedBizOps and to post subcontracting opportunities on the SBA Subnet. Registration with the System for Award Management (SAM) is mandatory for contract award. The designated point of contact for this procurement is Jenifer M. Bordelon, reachable by phone or email for further inquiries. The place of performance is New Orleans, Louisiana, and all contract activities are managed through the Department of Defense’s New Orleans office.

General Info

US Army contracts Mobil Delvac oils delivery to New Orleans dock by June 19, with regulatory compliance.

NAICS

324191 - Petroleum Lubricating Oil and Grease Manufacturing

Place of Performance

7400 Leake Ave. New Orleans, LA 70118, NEW ORLEANS, LA, 70118, USA

Set-Aside

NONE

Documents

1

Combined Synopsis/Solicitation W912P818T0058 - Mobil Delvac Oil (Dredge Wheeler)

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W07V Endist New Orleans
Contacts1 person available
OfficeNEW ORLEANS, LA, 70118-3651, USA
Office AddressNEW ORLEANS, LA, 70118-3651, USA
Contacts

Full Description

Show more
The USACE, New Orleans District intends to issue a Request for Quote (RFQ) for Brand Name Only Mobile Delvac oil as described below. This is an UNRESTRICTED procurement. NAICS Code: 324191. The resulting contract shall be firm fixed price (FFP). All qualified business concerns may submit offers. This requirement is to provide the following: 4500 gallons of Mobil Delvac 1640 SAE 40 via truck to the Dredge Wheeler, located at the USACE New Orleans District dock on 19 June at 0800 hours. The vendor will provide 250 feet of hose for vertical lift to the ship and have pumping capacity of not less than 250 gallons per hour. The vessel is equipped with 2-1/2 inch quick disconnect fitting (male-cam and groove) at risor. The vendor shall meet USCG over-water transfer requirements. 16-55 gallon drums of Mobile Delvac 1300 15W-40 delivered to the Dredge Wheeler, located at the USACE New Orleans District dock any time between 13-19 June 2018 but not later than 19 June 2018 at 0800. The Government will not provide written paper copies of the solicitation. Telephone, written, facsimile, or e-mail requests for the solicitation package will not be honored. Potential contractors are responsible for monitoring this site for the release of the solicitation package and any amendments. The solicitation documents for this procurement will be posted on FedBizOps (www.fbo.gov ). You will need Adobe Reader for .pdf files (www.adobe.com ) in order to open most files posted by the New Orleans District. You are encouraged, for marketing purposes, to register as an Interested Vendor in FedBizOps (www.fbo.gov). This can be done by clicking on the solicitation title and clicking on the button that says Register as an Interested Vendor and entering your business information. Offerors are also encouraged to post notices of prospective subcontracting opportunities on the Small Business Administration Subnet, at http://web.sba.gov/subnet . Offerors must be registered with the System for Award Management (SAM) to receive a Government contract award. You may register online at http://www.sam.gov . The point of contact for this procurement is Jenifer M. Bordelon at +1 (555) 000-0000 or contact@example.gov.

Similar Contracts

Same NAICS industry code

NAICS: 324191
New
DIBBS
LUBRICATING OIL, ENGINE
Solicitation # SPE4A6-27-T-6952
Solicitation SPE4A6-27-T-6952, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of 36 gallons of engine lubricating oil. The required material is identified by NSN 9150017227982 and corresponds to Deere & Company and James River Equipment Inc part number TY26667. This item is classified as a Commercial Off The Shelf product and does not have a shelf life requirement. The unit of issue is defined as a 5.0 gallon pail. Delivery is set for FOB Destination with a need ship date of February 15, 2027, and an original required delivery date of October 31, 2027. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Because the material is hazardous, the contractor must provide SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Quality assurance will be conducted at the destination using sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding of contractor information systems, and restrictions on covered defense telecommunications.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 324191
New
Federal
9150--Turbine Engine Oil
Solicitation # 36C26227Q0069
The Department of Veterans Affairs is issuing a Sources Sought Notice and Request for Information to identify qualified sources for turbine engine oil equivalent to Castrol Aero J5 (Part# 15AF27). This is not a formal solicitation but a planning effort to conduct market research and determine the appropriate acquisition strategy. The requirement consists of five 55-gallon drums of synthetic-base oil that must cover three classes of gas turbine engine lubricating oils, be intended for aircraft engines with a nominal viscosity of 5 centistokes at 100 degrees Celsius, be identified by NATO Code Number 0-156, and maintain full compatibility with MIL-PRF-23699F approved oils. Interested respondents must submit their capabilities statements and business information via email to the designated contract specialist by November 2, 2026. The government is specifically seeking information regarding business size under NAICS 324191, socioeconomic status such as SDVOSB or VOSB, and compliance with the Buy American Act and the Non-Manufacturer Rule. Responses should include the company's SAM.gov Unique Entity ID, lead times, and any existing federal contract vehicles like GSA or NASA SEWP. While general pricing is encouraged for market research purposes, it will not be used for an award, as this notice does not constitute a binding offer.
262-NETWORK Contract Office 22 (36C262)

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 324191
MARINE GREASE — 9150016517256 — N0010426QFD66
Solicitation # N00104-26-Q-FD66
Solicitation N00104-26-Q-FD66, issued by NAVSUP Weapon Systems Support, is a request for quotations for Marine Grease (NIIN 016517256), specifically Part Number A2283-93 LVP from TRI/Applied Technologies, Inc. Due to its use in crucial shipboard systems, the material is designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured), requiring strict adherence to toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The material must be mercury-free, physically identified according to MIL-STD-130, and marked with an expiration date. Although the solicitation was issued on April 29, 2026, with a quote deadline of May 14, 2026, a subsequent amendment dated August 27, 2026, officially canceled the solicitation. The procurement process emphasizes past performance as the primary evaluation factor, weighted more heavily than price. Technical requirements include strict configuration control, with any waivers or engineering change proposals requiring approval from the Contracting Officer. Packaging must comply with MIL-STD-2073 and ASTM D3951-18 depending on the shipment destination. Administrative requirements specify the use of the Wide Area Workflow (WAWF) system for invoicing and certification data submission to the Portsmouth Naval Shipyard. Delivery is set as FOB Destination with a final delivery window of 200 days, and constructive acceptance is extended to 45 days after delivery.
Navsup Weapon Systems Support Mech

POSTED

2 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → W07V Endist New Orleans

Same awarding agency

NAICS: 237990
New
Federal
LAKE PONTCHARTRAIN & VICINITY (LPV), FORESHORE RISK REDUCTION REPAIRS, REACH-1, 2, 3, & 4 Jefferson Parish, Louisiana (ED 24-006)
Solicitation # W912P826BA009
The U.S. Army Corps of Engineers New Orleans District is soliciting bids for the Lake Pontchartrain and Vicinity Foreshore Risk Reduction Repairs project in Jefferson Parish, Louisiana. This unrestricted, firm fixed-price construction contract, under NAICS code 237990, has an estimated magnitude between $25 million and $100 million. The scope of work involves repairing existing foreshore protection and embankments across Reaches 1, 2, 3, and 4, including activities such as demolition, clearing and grubbing, excavation, placing embankment, installing separator geotextile, placing stone, and turf establishment and maintenance. The bid submission deadline is Thursday, October 29, 2026, at 10:00 a.m. local time, with the bid opening following at 11:00 a.m. Bids will be evaluated based on responsiveness and price reasonableness, with award made as a whole to one bidder. Key requirements include compliance with EM 385-1-1 safety standards, the Davis-Bacon Act, and the Buy American Act. The contract specifies liquidated damages of $4,295.00 per calendar day of delay and requires the submission of performance and payment bonds prior to the issuance of a Notice to Proceed. Bidders must also provide an Accident Prevention Plan and a Contractor Quality Control Plan before physical work begins.
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 326199
Federal
Sources Sought for Calcaiseu River Saltwater Barrier FRP Tainter Gate
Solicitation # W912P827SS0001
The US Army Corps of Engineers, New Orleans District, is conducting market research via a sources sought notice for the design, fabrication, and delivery of fiber reinforced polymer FRP Tainter Gates for the Calcasieu River Saltwater Barrier. The requirement consists of a base bid for two gates and an option for three additional gates, totaling five units. These gates must be fully integrated into the existing structure, maintaining interchangeable installation and operation with existing steel gates, including specific bolted connections, seal locations, and machinery lifting connections. The completed gates will be delivered by barge and offloaded at the Calcasieu River Saltwater Barrier and Sector Gate facility, though the USACE will handle the actual installation. The anticipated contract will be a firm-fixed-price, Two-Phase Design Build project under NAICS code 326199, with a small business size standard of 750 employees. The government is seeking capabilities statements of no more than twenty pages to evaluate market capacity, specifically focusing on technical resources, bonding capabilities, and the ability to meet tight program schedules. Interested parties must submit their responses via email to Taylor Brandon and Karen Hargrave by 1:00 PM local time on November 4, 2026. This notice is for informational purposes only and does not constitute a formal solicitation or request for proposal.
All Other Plastics Product Manufacturing

POSTED

13 days ago

DEADLINE

in 6 days
View Details
NAICS: 332911
Federal
3-Way Control Valve and Controls for the U.S. Dredge Wheeler
Solicitation # W912P826QA039
The U.S. Army Corps of Engineers, New Orleans District, is soliciting quotes for the procurement of two fully assembled pneumatic 3-way temperature control valves and a corresponding pneumatic control system with an integral temperature sensor for the U.S. Dredge Wheeler. This requirement is issued as a total small business set-aside under NAICS code 332911 for Industrial Valve Manufacturing. The contract will be awarded as a firm-fixed-price agreement to the responsible offeror representing the best value to the government. Technical requirements specify that the valves must be designed for fresh water and MarineCare Caretreat, with deliverables including operation and maintenance manuals as well as hydrostatic pressure and seat leakage certifications. Under Amendment 0001, the quote submission deadline has been extended to October 30, 2026, at 10:00 AM local time. Offerors must be registered in the System for Award Management and provide a technical quote including general arrangement drawings, piping and instrumentation schematics, and detailed product datasheets. The equipment must be delivered FOB Destination to New Orleans, Louisiana, on or before June 1, 2027. Award evaluation is based on technical acceptability and price, with payment processed electronically through the Wide Area WorkFlow system.
Industrial Valve Manufacturing

POSTED

about 1 month ago

DEADLINE

in 1 day
View Details
NAICS: 237990
Federal
Barataria Bay Waterway, Maintenance Dredging, Bar Channel
Solicitation # W912P826BA062
The US Army Corps of Engineers, New Orleans District, is soliciting bids for a firm fixed price contract for maintenance dredging of the Barataria Bay Bar Channel in Jefferson Parish, Louisiana. The scope of work involves the removal of shoal material and its disposal at the Grand Terre Island disposal site, with no dike work required. The project includes the dredging of an estimated 375,000 cubic yards for the primary requirement and an additional 100,000 cubic yards as an optional quantity, along with mobilization, demobilization, and bird nesting avoidance measures. The estimated time for completion is 90 calendar days after the receipt of the notice to proceed. Award will be made to a single bidder based on total price, with a 10 percent evaluation preference applied to HUBZone small business concerns and other successful small businesses. The contractor must adhere to EM 385-1-1 safety standards, the Seagoing Barge Act, and prevailing wage rates specified in General Decision LA20260007. Key deliverables include a preliminary project schedule within 15 days and an initial project schedule within 42 days of the notice to proceed. Final acceptance is contingent upon a formal inspection by the Contracting Officer, requiring 14 days advance notification from the contractor. Payments will be processed electronically through the Wide Area WorkFlow system.
Other Heavy and Civil Engineering Construction

POSTED

about 2 months ago

DEADLINE

in almost 2 years
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS