Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Mobile Tool Cabinet Supply

Open
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of four mobile tool cabinets for prime contractors delivering equipment to the Army at Fort Campbell, KY. The contractor is responsible for manufacturing or sourcing cabinets that adhere to NSN 5140017235610 specifications, with strict requirements for packaging compliance under GSAM 552.211-75 or ASTM D-3951. Additionally, all deliverables must meet DOT HMR and OSHA HCS standards regarding hazardous materials. Managed by the General Services Administration's Supply Chain Management Contracting Division, the project falls under NAICS code 332439. There is no specified set-aside status for this opportunity. The contract is centered on ensuring the delivery of specialized equipment to the designated performance location in Kentucky.

General Info

Supply four mobile tool cabinets for Army equipment delivery at Fort Campbell, KY.

NAICS

332439 - Other Metal Container Manufacturing

Place of Performance

Fort Campbell, KY, 42223, USA

Set-Aside

NONE

Documents

This scope was carved out of 47QSCC-27-Q-0050.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Request for Quote, 5140017235610, CABINET, TOOL, MOBILE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Due in 7 days

Read the full solicitation package

This scope is part of a larger contract. Its documents live on the prime.

  • 2 documents on the prime contractFrom Request for Quote, 5140017235610, CABINET, TOOL, MOBILE
Read the prime's documents

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeneral Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supplies mobile tool cabinets for prime contractors delivering equipment to the Army at Fort Campbell, KY. Manufactures or sources cabinets meeting NSN 5140017235610 specifications, ensuring packaging complies with GSAM 552.211-75 or ASTM D-3951. Must meet DOT HMR and OSHA HCS standards for hazardous materials. Delivers four mobile tool cabinets.

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
SLED
Shipping Storage Containers
Solicitation # RFQ-12MPD-432
The Indianapolis Metropolitan Police Department is soliciting quotes under RFQ-12MPD-432 for the outright purchase and delivery of one-trip high cube shipping storage containers to three locations in Marion County, Indiana. The requirement includes four 40-foot containers with tunnel access doors and several 20-foot containers to be distributed among the Firearms Facility, Riverside Fleet Services, and the Property Room Annex. Notably, the vendor must provide a forklift or boom truck for delivery to the Property Room Annex due to space constraints. The contract will be awarded to the lowest responsive and responsible bidder, with the possibility of splitting the award between multiple vendors. Quotes must be submitted by November 18, 2026, at 10:00 a.m. Eastern Time via the electronic procurement portal or by hard copy delivery to the City County Purchasing Division. Required documentation includes an Exception Sheet, Affidavit of Non-Collusion, Nepotism form, Bid Acknowledgement Form, and socioeconomic certifications, with the low bidder specifically required to submit form CC-09. Delivery must be completed within 45 calendar days of a valid order under FOB Destination terms, with all shipping costs included in the unit price. The City of Indianapolis and Marion County are tax-exempt, and the contract may be renewed in compliance with IC 5-22-17-4. All goods must meet OSHA standards and industry packaging requirements.
Indianapolis Metropolitan Police Department

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details

More opportunities from General Services Administration → Supply Chain Management Contracting Division Gsa/fas/gss/qscb

Same awarding agency

NAICS: 334416
New
Federal
Purchase Olson Electrics 300k Pad Mount Transformer
Solicitation # 47QSSC27Q0027
Solicitation 47QSSC27Q0027 is a request for quote for the purchase and delivery of one Olsun Electrics 300 kVA Cast Coil Pad Mount Transformer for NAVFAC SW MPD HVE Utilities. The procurement is designated as brand name, with no substitutions accepted, because only Olsun provides the specific radial feed-through dry type transformers required for the installation where liquid-filled alternatives are not feasible. The estimated contract value ranges between 141,334.00 and 172,427.48 USD. Technical specifications require a 3-phase, 60 Hertz unit with a NEMA 3R 316 stainless steel enclosure in Munsell Green, primary voltage 12000D, and secondary voltage 208Y/120. The unit must be American made in accordance with Buy American requirements and include IEEE/ANSI factory production test reports. The contract will be awarded based on the lowest evaluated price to a responsible offeror who passes all administrative compliance checks. Valid quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, with the updated delivery location specified as the East Miramar Marine Corps Base storage facility. Vendors are required to be registered in SAM.gov and the OMS Vendor Portal or EDI. Packaging and marking must strictly adhere to MIL-STD-129R for military deliveries, including the use of specific 2D barcodes and Transportation Control Numbers.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

6 days ago

DEADLINE

in 22 days
View Details
NAICS: 334416
New
Federal
Purchase Olsun Electrics 225 KVA Transformer
Solicitation # 47QSSC27Q0028
Solicitation 47QSSC27Q0028 is a Request for Quote issued by the General Services Administration on behalf of NAVFAC SW MPD HVE Utilities for the purchase and delivery of one Olsun Electrics 225kVA Cast Coil Transformer. This equipment is mission-critical for operations at Naval Base San Diego, California. The transformer must be a 3-phase, 60 Hertz, copper wound, pad-mounted unit with a NEMA 3R cold rolled 316 stainless steel enclosure. Technical specifications include a primary voltage of 12000D, secondary voltage of 208Y/120, and a radial feed-through design with three 200A bushing wells. Due to specific technical requirements and a lack of containment pads for oil-filled alternatives, this is a brand-name procurement, and no substitutions will be accepted. The contract will be awarded on a Lowest Price Technically Acceptable basis to a responsible offeror who passes an administrative compliance review. To be considered valid, quotes must be submitted by December 10, 2026, and must include the completed RFQ document and a signed MIL-STD 129 compliance document. Delivery is FOB Destination, CONUS, to Naval Base San Diego. The awarded vendor must comply with MIL-STD-129R marking and shipping label requirements and provide factory test results, including IEEE/ANSI Standard production tests. Estimated total dollar values for the procurement are cited between $120,364.00 and $146,844.08.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

6 days ago

DEADLINE

in 22 days
View Details
NAICS: 332999
New
Federal
Vehicle Lift System - Mobile Column Type
Solicitation # 47QSSC27Q0045
The General Services Administration Direct Demand Contract Solutions Division is requesting quotes for one Vehicle Lift System - Mobile Column Type, specifically Sanitz Enterprises P/N AP1001321, Brand Name or Equal. The system must consist of eight synchronized mobile lifting columns, each with a minimum capacity of 19,000 pounds, capable of accommodating tires up to 63 inches in diameter and 12 inches deep. The equipment must include wheel-engaging lifting forks or brackets and mechanical safety locks to secure loads at various heights. Delivery is required on an FOB Destination basis to Fort Bliss, TX, and vendors must be registered to receive purchase orders via the OMS Vendor Portal or EDI. There is no set aside used for this procurement. Award will be based on the lowest evaluated price for vendors who pass the administrative compliance and technical acceptability evaluations. Administrative compliance is a pass/fail factor; failure to submit required documents or complete all fields on the RFQ will result in disqualification. Technical acceptability is also pass/fail, and any "or equal" offerings must include detailed technical specifications for evaluation. All shipments must strictly adhere to MIL-STD-129R marking and shipping label requirements, including the use of 2D bar codes and specific identification data on containers.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

6 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 332216
Federal
Purchase NSN 5120001692986, TORQUE WRENCH MULTIPLIER
Solicitation # 47QSSC27Q0042
The General Services Administration is soliciting quotes for the purchase of six units of NSN 5120001692986, specifically the Power-Dyne PD1201 Torque Wrench Multiplier. This is a brand-name acquisition with no substitutions allowed, as the item is aircraft sensitive. The required specifications include a torque capacity of 0 to 1,200 foot-pounds, a 25 foot-pound scale graduation with an analog gauge signal, a 3/8 inch internal square drive input, and a 3/4 inch internal square drive output. The units must be made of steel, feature a 6-inch crank length, operate between -20 and 130 degrees Fahrenheit, and include a carrying case. Each item must be permanently marked with the manufacturer's name, part number, and country of origin. This procurement is a Small Business Set Aside - Total under NAICS 332216, with a size standard of 750 employees or less. Award will be based on the lowest evaluated price for vendors that meet all administrative compliance requirements. Delivery is FOB Destination to Norfolk, VA, and must comply with MIL-STD-129R marking and shipping label requirements, including the use of 2D (PDF417) bar codes. To be considered valid, quotes must include a completed RFQ document and a signed MIL-STD-129R compliance form. The solicitation is subject to the Buy American Act and GSA Class Deviations RFO-2025-12 and RFO-2025-25.
Saw Blade and Handtool Manufacturing

POSTED

10 days ago

DEADLINE

in about 15 hours
View Details

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS