This Government Contract opportunity from Department Of Defense was posted on February 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Mobile Trailer-Mounted Coolant Cart Assembly

Closed

Federal

Submission Closed03/11/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336212

New

International

RFP - Fleet Service BodyThe City of Moose Jaw is seeking proposals to supply a fleet service body specifically designed for a 2023 GMC Sierra 2500 HD Pro Double Cab, with all bids required to be submitted electronically to procurement@moosejaw.ca no later than August 12, 2026, at 2:00 p.m. Central Standard Time. The solicitation, identified as PW-18-26, was posted on July 24, 2026, and additional details including technical specifications and submission guidelines are available on the City’s procurement portal at www.moosejaw.ca/tenders and through the SaskTenders website. All proposals must adhere strictly to the outlined requirements to be considered valid. The contract is managed by the Saskatchewan Public Sector under the City of Moose Jaw’s procurement authority, with CMJProcurement listed as the primary point of contact for inquiries. The service body will be installed and used within Saskatchewan, and there is no specified set-aside for small or minority-owned businesses. Bidders are responsible for ensuring complete compliance with all terms, and failure to meet submission deadlines or formatting requirements may result in disqualification. The procurement process is closed to public bid viewing outside the official channels, and only electronic submissions received by the deadline will be evaluated.

POSTED

DEADLINE

Custom Boat Trailer Manufacturing and IntegrationThe contract requires the design and fabrication of a custom, roadworthy trailer specifically engineered to transport an 18-foot aluminum mud boat equipped with a mounted 40HP outboard motor. The trailer must meet all Department of Transportation standards for safety and compliance, including properly installed and functional lighting systems. Special attention must be paid to the structural integrity and load distribution to accommodate the boat’s weight and configuration, ensuring safe and stable transport on public roads. The trailer must also incorporate features that facilitate secure and efficient loading and unloading, such as adjustable bunks, winch systems, and ramps designed for the unique hull shape and low-draft nature of the mud boat. Deliverables must be completed by the response deadline of August 7, 2026, and the work falls under NAICS code 336212, indicating specialized manufacturing of boat trailers. The contract is classified as a subcontract under the Texas Parks and Wildlife Department, with performance expected to align with state and federal transportation regulations. While the exact location of performance is unspecified, the project is managed through the Texas SmartBuy procurement portal, and all materials, components, and assemblies must be sourced and built to ensure durability in outdoor and aquatic environments. The trailer must be fully operational and inspection-ready upon delivery, with no allowances for substandard materials or compromised safety features.

Parks and Wildlife Department

POSTED

DEADLINE

Fire Apparatus Customization & IntegrationThe contract involves the customization and integration of a Ladder/Tower Unit fire rescue vehicle designed to meet NFPA 1901 standards, requiring extensive chassis modification, body fabrication, and full integration of electrical and hydraulic systems. This specialized work ensures the vehicle is engineered for optimal performance in emergency response scenarios, with all components compliant with national safety and operational requirements. The project demands precision in assembly and system coordination to guarantee reliability under high-stress conditions typical of fire and rescue operations. The work is to be performed at Stennis Space Center with a zip code of 39529, and submissions are due by August 3, 2026, by 7:00 PM. This is a subcontract opportunity under NAICS code 336212, which classifies it within the Motor Vehicle Body Manufacturing sector. The contracting entity is the NASA Shared Services Center, operating under the National Aeronautics and Space Administration, although specific point of contact details are not provided. The solicitation was posted on July 24, 2026, and interested parties must respond through the designated SAM.gov portal before the deadline.

NASA Shared Services Center

POSTED

DEADLINE

10 Horse TrailerA 10-year structural warranty is provided for a 10-horse trailer under a total small business set-aside contracting opportunity, with the NAICS code 336212 for truck and trailer manufacturing. The solicitation, numbered W911S226U3786, was posted on July 24, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, NY. Delivery of the trailer is required no later than 180 days from award and must be made to Fort Myer, Virginia, with a zip code of 22211. The contract is combined in type and issued under the SBA’s total small business set-aside program, ensuring eligibility for qualifying small businesses. Primary point of contact for inquiries is Marisol Lacour, reachable via email at marisol.c.lacour.mil@army.mil.

POSTED

DEADLINE

100 CES All Hazards Response TrailerThe solicitation FA558726Q0023 seeks an All Hazards Response Trailer for the 100th Civil Engineering Squadron at RAF Mildenhall, Suffolk, United Kingdom, under a combined contract type with no set-aside designation. The trailer is intended for use by the Department of Defense and must meet the operational needs of a military installation requiring rapid response capability across a spectrum of hazards. The solicitation was posted on July 24, 2026, with a response deadline extended by ten business days to August 7, 2026, at 14:00 UTC. While the NAICS code 336212 indicates the procurement is for motor vehicle body manufacturing, specific technical specifications, performance requirements, and delivery terms are not available due to restricted access to core contract documentation sections. The point of contact is A1C Brandon Hampton, with SSgt Jennifer Lopez as the secondary contact, and the government office managing the procurement is based in APO AE 09461-5120. Two attachments are referenced—Salient Characteristics and Quote Sheet—but their contents are inaccessible. No details are available regarding evaluation factors, pricing, inspection criteria, packaging requirements, contract administration, or offeror certifications due to repeated system access errors preventing retrieval of key contractual elements. The estimated contract value and source of funding are not disclosed in the available data.

FA5587 48 Cons (admin Only No Req)

POSTED

DEADLINE

31 LRS European 4x2 Tractor TruckThe U.S. Air Force, through the 31 Contracting Squadron at Aviano Air Base, Italy, is seeking quotes for the procurement of one European 4x2 tractor truck under CLIN 0001, with an optional second unit under CLIN 0002, to be delivered FOB Aviano AB, Italy. The solicitation, identified as FA568226QA061, is a combined synopsis and solicitation issued under commercial item procedures outlined in FAR Subpart 12.2, and responses must be submitted by August 24, 2026. The vehicle must comply with European road and emissions standards, include ADR EX/III certification for hazardous goods transport, feature a minimum 500 HP engine, 4x2 axle configuration, 24V electrical system, LED lighting, and black paint, and come with operator and maintenance manuals and a three-year manufacturer warranty. The contract is a Firm Fixed Price arrangement, and while no monetary values are disclosed, evaluation will be based holistically on the Total Evaluated Price, the adequacy of the Technical Exhibit demonstrating compliance, and the proposed delivery schedule, without assigned weights or risk ratings, allowing for a best-value trade-off determination. The Government will inspect and accept the vehicle upon delivery at the designated location, and payment will be processed electronically via Wide Area WorkFlow using specified DoDAACs. Special requirements include the option to exercise the additional unit by September 30, 2026, and compliance with numerous far-reaching clauses related to tax exemptions under Italian law, prohibition of business operations with the Maduro regime and the Xinjiang Uyghur Autonomous Region, anti-human trafficking, whistleblower protections, and security restrictions, as well as adherence to the Buy American Act and foreign supplier qualifications. Contractor compliance with reporting obligations on child labor, supply chain due diligence, and subcontracting controls is required, and all submissions must be in PDF format with three distinct components: a price schedule, a detailed Technical Exhibit that goes beyond mere specification replication, and a delivery schedule. Tax exemptions apply under Article 72 of Italian Decree Law 633, excluding VAT, customs duties, and other local levies. Submission must include an active SAM registration, and while no specific submission portal is designated, electronic submission is implied. The contract incorporates standard commercial terms including F.O.B. destination, contract changes, termination for convenience, and dispute resolution under U.S. federal law, with

FA5682 31 Cons (unit 6102)

POSTED

DEADLINE

REQUEST FOR QUOTATION N4008426Q1016 PROCUREMENT OF LIGHT TRUCKS FOR NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND FAR EASTThe U.S. Department of the Navy, through Naval Facilities Engineering Systems Command Far East, is soliciting quotations for the procurement of light trucks under a combined synopsis/solicitation issued as a Request for Quotation (RFQ) N4008426Q1016, governed by FAR Part 12 as a commercial item acquisition. The solicitation, posted on July 23, 2026, with a response deadline of August 12, 2026, is not set aside for small businesses and seeks vehicles to be delivered to Okinawa, Japan, with a confirmed correction to the delivery location from Misawa. The trucks must comply with environmental durability requirements, including mandatory optional rustproofing and undercoating suitable for Okinawa’s humid, corrosive climate, as detailed in Attachment_1_Specification.pdf. All transportation costs are borne by the contractor, and delivery is to be made at the designated destination. The contracting office is located at FPO, AP 96349-0013, with point of contact information provided for both procurement and logistics support. The award will likely follow a Lowest Price Technically Acceptable process, consistent with FAR Part 12 commercial item procedures, though specific evaluation factors are not detailed in the available materials. Payment processing will be handled via the designated Navy payment office, and invoicing is expected to occur through standard DoD systems such as WAWF. Offerors must submit responses electronically via SAM.gov, referencing the provided solicitation number, and must be registered to access required provisions and clauses via acquisition.gov, though specific clauses, packaging requirements, inspection standards, and representations are referenced by inclusion without full text provided. No contract value estimate is disclosed, and no CLIN or pricing details are available in the released information.

Navfacsyscom Far East

POSTED

DEADLINE

Custom Vehicle Integration and AssemblyThe contract requires full integration, assembly, and testing of small and large crime scene management vehicles tailored to meet FBI specifications, encompassing chassis modifications, structural welding, equipment installation, and comprehensive electrical system integration. All work must be performed to ensure the vehicles are fully operational and compliant with federal standards for crime scene response, with attention to durability, safety, and functionality in field conditions. The project includes end-to-end manufacturing processes from base vehicle modification to final quality assurance testing. This is a total small business set-aside under NAICS code 336212, exclusively available to small business concerns, and is issued as a subcontract under the Department of Justice’s FBI-JEH office. Responses are due by August 17, 2026, with the work to be performed at a location identified by the zip code 27348. The solicitation was posted on July 22, 2026, and no specific point of contact is listed, meaning all inquiries must be directed through the official SAM.GOV portal link provided for further details and submission.

POSTED

DEADLINE

Highway-Compliant Trailer and Towing System FabricationThe contract calls for the design and fabrication of a DOT-compliant trailer base equipped with a towing coupler, integrated lighting, braking system, and leveling jacks, ensuring full compliance with federal highway regulations for transport at legal speeds and weight limits. The trailer must be engineered to reliably support heavy loads while maintaining structural integrity, safety, and operational efficiency on public roadways. All components must meet or exceed applicable safety and performance standards for commercial vehicle equipment. This is a small business set-aside subcontract under NAICS code 336212, open exclusively to small businesses as defined by the SBA, with a response deadline of July 28, 2026. The work is to be performed in Tampa, Florida, under the oversight of the Department of Defense through office FA4814 6 Cons Pk. The solicitation was posted on July 22, 2026, and bidders must submit proposals before the deadline to qualify, with performance expectations centered on delivering a fully functional, inspection-ready trailer system capable of sustained highway use under demanding conditions.

POSTED

DEADLINE

Trailer Fabrication & Integration ServicesThe contract seeks a qualified contractor to design and fabricate a custom trailer compliant with Department of Transportation regulations for the safe transport of a recycler unit. The trailer must be engineered to support fluid loads with proper structural integrity, including integrated mounting systems, functional lighting, and certified braking mechanisms to ensure roadworthiness and safety during transit. All components must meet or exceed federal standards for commercial hauling equipment, with attention to durability, weight distribution, and load security for operational reliability. This is a subcontract opportunity designated exclusively for Women-Owned Small Businesses under the WOSB set-aside program, with a NAICS code of 336212 for trailer and coach manufacturing. The solicitation was posted on July 22, 2026, and responses are due by July 30, 2026, at 9:00 PM. The contracting authority is the Grand Coulee Power Office under the Department of the Interior, though specific performance location and point of contact details are not provided. Contractors must be prepared to deliver a fully engineered, DOT-certified solution ready for immediate integration and deployment.

Grand Coulee Power Office

POSTED

DEADLINE

Gooseneck Car Hauler Trailer The contract calls for the procurement of a new enclosed gooseneck car hauler trailer with a 28-foot interior floor length, 8.5-foot width, and a minimum height of 7.5 feet, featuring tandem double axles for enhanced load stability and durability. The trailer must be delivered no later than 45 days after contract award, with the delivery destination specified as Fort Myer, Virginia, zip code 22211. The solicitation, numbered W911S226U3788, was posted on July 22, 2026, with responses due by July 28, 2026, and is structured as a combined solicitation under a Small Business Administration total small business set-aside, indicating that only qualified small businesses are eligible to bid. The North American Industry Classification System code 336212 identifies the procurement as related to the manufacturing of truck and trailer bodies. The contracting activity originates from the Department of Defense, specifically under the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, and the primary point of contact for inquiries is Marisol Lacour, reachable via email at marisol.c.lacour.mil@army.mil.

POSTED

DEADLINE

HazMat TrailerThe contract pertains to an amendment clarifying quantities for a HazMat Trailer under solicitation number W911S226U3780, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. This is a total small business set-aside, meaning only small businesses as defined by the SBA are eligible to compete, with the North American Industry Classification System code 336212 indicating the work falls under manufacturing specialized transportation equipment. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, at 5:20 PM Eastern Time, and is categorized as a combined solicitation, suggesting it may include both acquisition and contracting methods. The place of performance is listed with a ZIP code of 54656, though specific city and state details are not provided, and all work is expected to support federal hazmat transportation needs. Kevin Nelson from the contracting office serves as the primary point of contact, reachable by phone at 502-898-2418 or email at kevin.a.nelson.civ@army.mil. The amendment focuses exclusively on refining the specified quantities of the HazMat Trailer to ensure accurate procurement planning and delivery. The contract is being managed under federal acquisition regulations and is accessible through the SAM.gov portal, indicating it is a formal, publicly listed government opportunity. Bidders must comply with all small business certification requirements and submit responses prior to the deadline to be considered for award.

W6QM Micc-Ft Drum

POSTED

4 days ago

DEADLINE

in 3 days

General Info

Agency

Department Of Defense → FA8205 Aflcmc WaukView Agency

NAICS

336212 - Truck Trailer ManufacturingView NAICS

Place of Performance

Hill Air Force Base, UT, 84056, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedFeb 11

subcontract

Response DeadlineMar 11

Deadline has passed

Submission Closed

03/11/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8205 Aflcmc Wauk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8205 Aflcmc Wauk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Final integration and assembly of PAO coolant cart systems onto trailer platforms, including structural framing, enclosure, reservoir installation, and environmental testing.