Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Monthly Preventive Maintenance & Inspections for Rack-and-Pinion Hoist Lifts

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and submission portals through the official WMATA supplier link.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Wheelchair Lift and Accessibility Equipment
Clayton County Board of Education

POSTED

about 5 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Extended Warranty Package Provision
Philadelphia Gas Works

POSTED

about 7 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
International
Chlorine Evaporator Maintenance and Inspection ServicesThis subcontract opportunity with the Ontario Clean Water Agency involves providing annual maintenance and detailed technical inspections of chlorine evaporators and related chlorinator services. The selected supplier will be responsible for utilizing specialized equipment to service evaporator units and must possess qualified status for the handling of hazardous materials. All work must culminate in the delivery of comprehensive annual maintenance and inspection reports. The project is based in Canada and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of November 27, 2026. This contract is designed for suppliers capable of supporting prime contractors on OCWA projects through specialized technical expertise in chlorination systems.
Ontario Clean Water Agency

POSTED

about 8 hours ago

DEADLINE

in 29 days
NAICS: 811310
New
SLED
Air Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Specialized Heat Exchanger Maintenance (Preventive & Corrective)
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Compressor Auxiliary Systems Maintenance
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Gas Packager Compressor Maintenance Services
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Ariel Gas Compressor Maintenance Services
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Roseville Electric Utility – Gas Compressor Maintenance
Solicitation # 07-137
The City of Roseville is soliciting proposals for Gas Compressor Maintenance Services to support the Roseville Energy Park and the Roseville Energy Center and RPEAK. The selected contractor will provide all labor, supervision, technical expertise, specialized tooling, equipment, and materials necessary for both scheduled preventive and corrective maintenance on natural gas compressors, specifically Gas Packagers and Ariel models, and their associated auxiliary systems. The contract is intended to run for an initial term of five years, with services estimated to commence in April or May. This is a prevailing wage project requiring adherence to all fair employment laws, with certified payroll required for contracts exceeding 25,000 dollars. The successful proposer must provide a 100 percent Faithful Performance Bond and a 100 percent Labor and Materials Bond. Proposals are due by December 17, 2026, and must include a Proposer’s Certification, a Non-collusion Declaration, a Levine Act Disclosure Statement, and proof of active registration with the California Secretary of State. Award will be made to the responsible proposer determined to be the most advantageous to the City through a formal evaluation panel process. Invoicing is to be submitted monthly, delineated by task and personnel, with payment terms set at 30 days following receipt of satisfactory services.
City of Roseville

POSTED

about 9 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

This contract requires performing monthly preventive maintenance and inspections on rack-and-pinion hoist lifts located at PAL Tower within Picatinny Arsenal. The scope includes conducting thorough diagnostics, lubrication, and safety checks to ensure the hoist lifts operate reliably under all weather conditions. The maintenance supports the U.S. Army Research, Development, Test, and Evaluation (RDT&E) missions by maintaining the operational readiness of critical equipment. The solicitation is managed by the Department of Defense under NAICS code 811310, with a subcontract type, and the contract emphasizes consistent scheduled service to minimize downtime and prevent equipment failures. The contract was posted on June 11, 2026, with responses due by June 23, 2026, highlighting the need for timely submissions. The location of performance is specified as Picatinny Arsenal, zip code 07806, though no specific set-aside or organizational type restrictions are indicated.

General Info

Monthly preventive maintenance and inspections on hoist lifts at Picatinny Arsenal for U.S. Army RDT&E.

Agency

Department Of Defense → W6QK Acc-Pica

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Picatinny Arsenal, NJ, 07806, USA

Set-Aside

NONE

Documents

This scope was carved out of W15QKN25PA144.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Synopsis of Award

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Pica
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform monthly inspections, diagnostics, lubrication, and safety checks on rack-and-pinion hoist lifts at PAL Tower to ensure reliable all-weather operation in support of U.S. Army RDT&E missions.

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 493190
Federal
Packaging, Preservation, and Marking (PP&M) ServicesThis contract involves the provision of packaging, preservation, and marking services in strict compliance with military standards, requiring that all items be prepared for shipment to Picatinny Arsenal or Foreign Military Sales destinations using MIL-STD-130 compliant UID marking, corrosion protection methods, and military-grade packaging protocols. The work encompasses full containerization to ensure safe, secure, and traceable transport of sensitive defense equipment and components throughout the logistics chain. The contract is classified as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the W6QK Acc-Pica office. It was posted on June 25, 2026, and requires full adherence to U.S. military logistical and identification standards without exceptions, emphasizing durability, traceability, and environmental protection during storage and transit. All deliverables must meet stringent defense logistics requirements to support operational readiness and international defense partnerships.
Other Warehousing and Storage

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Weapon System Testing and Quality Assurance (QA) ServicesThe contract pertains to comprehensive independent testing and quality assurance services for a weapon system, encompassing First Article Inspection, live-fire endurance evaluations, accuracy and dispersion measurements, environmental resistance testing, and full compliance verification against military standards. These activities are critical to ensuring the system meets rigorous performance, durability, and reliability requirements before field deployment. The work is structured as a subcontract under the Department of Defense, with the contracting office identified as W6QK Acc-Pica, and the North American Industry Classification System code 541380 indicates specialized engineering and technical services. Performance location details are unspecified, and no set-aside provisions or small business preferences are indicated, suggesting the opportunity is open to qualifying firms regardless of size or affiliation. The solicitation was posted in June 2026, and all testing must align precisely with defined military protocols to validate functional integrity under operational conditions.
Testing Laboratories and Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Barrel Forging and Rifling ServicesThe contract involves the manufacturing and processing of M240B machine gun barrels to exact military specifications, encompassing forging, rifling, chambering, and stress-relieving operations to ensure superior accuracy, heat resistance, and durability under sustained fire conditions. All work must meet stringent defense standards for performance and reliability, with the finished barrels intended for military use in high-demand operational environments. The service is classified as a subcontract under NAICS code 332212, linked to the Department of Defense and administered by W6QK Acc-Pica. The solicitation was posted in June 2026, with no set-aside provisions specified. While specific performance location and point of contact details are not provided, the work is expected to be carried out by a qualified industrial partner capable of delivering precision-engineered barrels consistent with military-grade requirements for longevity and combat readiness.
Hand and Edge Tool Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332721
Federal
Precision Machined Fire Control Group ComponentsThe contract entails the precision manufacturing of critical fire control components including trigger housing, sear, hammer, and disconnector, produced through advanced CNC machining, controlled heat treatment, and specialized surface finishing to ensure adherence to stringent military durability and reliability standards. These components must meet exacting tolerances and performance benchmarks required for high-stress operational environments, with process controls in place to guarantee consistency and traceability across production batches. The work is classified as a subcontract under NAICS code 332721, issued by the Department of Defense through the W6QK Acc-Pica office, with the opportunity posted in June 2026. While the place of performance and point of contact details are unspecified, the nature of the project implies a requirement for certified manufacturing facilities capable of handling defense-grade materials and complying with federal quality and security protocols. Production must align with the rigorous expectations of military-grade equipment, ensuring functionality under extreme conditions without compromise.
Precision Turned Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
M240B Machine Gun Final Assembly and IntegrationThe contract entails the final assembly, integration, and configuration of M240B machine guns strictly in accordance with U.S. military specifications and the FN Herstal Technical Data Package. This work includes comprehensive quality assurance protocols, mandatory test firing to verify functionality and reliability, and full compliance with First Article Inspection requirements to ensure all components meet rigorous performance and dimensional standards. All processes must be executed with precision to guarantee operational readiness and consistency with authorized military hardware. The subcontract is classified under NAICS code 332999 and is issued under the Department of Defense through the W6QK Acc-Pica office. The work will be performed in accordance with federal defense contracting requirements, though specific performance location and contact details are not provided. The solicitation was posted on June 25, 2026, and remains active for qualified subcontractors seeking to support defense manufacturing efforts. Participation requires demonstrated capability in small arms final assembly, adherence to technical data packages, and established quality control systems verified through military inspection processes.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Rapid Response and Prototyping Process DevelopmentThis subcontract under the Department of Defense, managed by W6QK Acc-Pica, focuses on the development and implementation of rapid prototyping processes for prime contractors supporting US Army DEVCOM AC projects. The primary objective is to address high-priority mission needs by designing agile workflows and prototyping cycles that bridge technical gaps through accelerated research and development. To achieve this, the project requires the use of specialized rapid prototyping facilities and agile development methodologies. The contract deliverables include the creation of comprehensive prototyping frameworks, the production of functional prototypes, and the establishment of streamlined response processes. This effort is categorized under NAICS code 541715, with a response deadline set for March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541611
Federal
Operational Environment Evaluation & Requirements AnalysisThis subcontract, titled Operational Environment Evaluation & Requirements Analysis, is issued by the Department of Defense under agency W6QK Acc-Pica. The primary objective is to evaluate operational environments for prime contractors on US Army DEVCOM AC projects to identify specific technology transition opportunities. This involves observing and analyzing operational missions, training scenarios, and field situations across military, federal, and civilian sectors, which requires the contractor to be capable of operating within military operational environments. The scope of work culminates in the delivery of detailed operational environment analysis reports and technology gap assessments. Classified under NAICS code 541611, the opportunity was posted on June 2, 2026, with a response deadline set for March 4, 2031.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541330
Federal
Technology Utilization and Integration SupportThe Technology Utilization and Integration Support subcontract, managed by the Department of Defense under W6QK Acc-Pica, focuses on transitioning commercial, academic, and agency technologies into operational capabilities for US Army DEVCOM AC projects. The selected provider will be responsible for identifying transition-ready technologies, assessing maturity levels, and leading multi-disciplinary teams to integrate these technologies into final capabilities. This role requires strong systems engineering capabilities to ensure successful implementation. Key deliverables for this engagement include comprehensive transition plans, detailed integration reports, and the development of functional prototypes. The contract falls under NAICS code 541330 and has a response deadline of March 4, 2031.
Engineering Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
Advanced and Innovative Technology Review ServicesThe Advanced and Innovative Technology Review Services subcontract, managed by the Department of Defense under agency W6QK Acc-Pica, focuses on the continuous monitoring and evaluation of advanced technologies for prime contractors supporting US Army DEVCOM AC projects. The scope of work involves analyzing emerging technology trends for government applications and coordinating with academic institutions, government research labs, and various agencies to identify new information sources. Key deliverables include the production of technology review reports, detailed meeting summaries, and curated lists of relevant technologies. This effort falls under NAICS code 541715 and is scheduled with a response deadline of March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Custom Engineering Analysis SupportThe contract titled Custom Engineering Analysis Support provides on-demand engineering expertise to support DEVCOM-AC teams with complex simulations, model validation, and advanced use cases requiring specialized technical assistance. This subcontract is issued under NAICS code 541330 for scientific and technical consulting services and is administered by W6QK Acc-Pica under the Department of Defense. The work is performance-based at a designated location in Waltham, Massachusetts with a ZIP code of 02451. Services are mobilized as needed to address urgent or intricate technical challenges that exceed standard capabilities, ensuring timely and precise engineering solutions for defense-related modeling and simulation efforts. The contract does not specify a solicitation number or set-aside type, indicating it is likely an unfunded or task-order-based arrangement within an existing overarching agreement.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Specialized Engineering Training DeliveryThe contract entails the delivery of specialized instructor-led and virtual training on advanced engineering software modules including ABAQUS/CAE, Composites Modeler, fe-safe, XFlow, and Wave6 to Army engineers. The training is designed to enhance technical proficiency in simulation and analysis tools critical to defense engineering applications, ensuring personnel are equipped to leverage these platforms effectively in mission-critical projects. Instruction must be tailored to meet the technical needs of military engineering teams, emphasizing practical application and real-world problem solving using these industry-standard systems. Performance is required to take place in Waltham, Massachusetts, with a NAICS code of 611430 indicating the work falls under custom computer programming services, specifically within technical training and education. The contract is structured as a subcontract under the Department of Defense’s W6QK Acc-Pica office, with no set-asides specified, indicating open competition among qualified vendors. The solicitation was posted on May 14, 2026, and while no point of contact or specific funding details are provided, the location and software focus suggest a strong alignment with DoD efforts to modernize computational engineering capabilities through targeted technical education initiatives.
Professional and Management Development Training

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
Equipment Maintenance and Repair Services
0413 Aq Hq Contract Augmented

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Eaton UPS Preventive and Corrective Maintenance Services
National Institutes Of Health Olao

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Preventive Maintenance Services for Delta Anti-RAM Barriers
US Embassy Mexico

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Installation of Mechanical Tilt Frame Angle C Blade Package
W7N8 Uspfo Activity Wiang Crtc

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Equipment Upgrades and Refurbishment Services
W6QK Acc Anad

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Emergency Repair and Breakdown Response for Polishing Equipment
W6QK Acc Anad

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Onsite Preventative Maintenance for QPAC Polishing Equipment
W6QK Acc Anad

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Silicone Gasket Installation for High-Containment Facility Doors
USDA Ars Afm Apd

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 811310
Closed
Federal
Warranty and Field Service Support
Fpac Bus Cntr-Acq Division

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
On-Site Installation and Commissioning Services
W7NX Uspfo Activity Pa Arng

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Escalator Maintenance and Repair Services
FA4626 341 Cons Lgc

POSTED

5 months ago

CLOSED

4 months ago
View Details
NAICS: 811310
Closed
Federal
Unscheduled Elevator Repair Services – All Locations
FA4626 341 Cons Lgc

POSTED

5 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS