Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Motorcycle Barrier Installation

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Caltrans District 1 in Eureka is seeking a subcontractor to install motorcycle-specific barriers designed to prevent entrapment or snagging during vehicle impacts, particularly at guardrail transitions and medians. The work falls under NAICS code 238990 and is intended to enhance roadway safety for motorcyclists by mitigating hazards associated with common crash scenarios. The contract was posted on July 13, 2026, and all performance is expected to occur within California, though specific locations are not detailed. The project is accessible through the Caltrans project portal, and while no set-aside designation or point of contact is provided, the subcontract nature suggests it may be awarded to a specialized firm with experience in traffic safety infrastructure.

General Info

Caltrans seeks subcontractor to install motorcycle safety barriers in California to reduce crash hazards.

Agency

California → Caltrans, District 1 - Eureka

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Caltrans, District 1 - Eureka

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Caltrans, District 1 - Eureka

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Install motorcycle-specific barriers to prevent entrapment or snagging during impacts, typically at guardrail transitions or medians.

Similar Contracts

Same NAICS industry code

Weather-Stripping and Threshold InstallationThe contract calls for the installation of fire-rated weather-stripping and ADA-compliant thresholds at all designated door openings to meet requirements for energy efficiency, smoke containment, and full accessibility compliance. The work must be executed in strict accordance with building and safety codes to ensure that doors function properly under emergency conditions while maintaining compliance with federal accessibility standards. The scope includes all necessary materials and labor to retrofit existing door assemblies with approved components that provide both thermal sealing and barrier integrity during fire events. This subcontract is issued by the City of Rapid City under South Dakota oversight, with a posted date of August 8, 2026, and a response deadline of September 1, 2026. The North American Industry Classification System code 238990 indicates the work falls under other specialty trade contracting. The project is not subject to a specific set-aside classification, and performance will occur at locations determined by the city, with no public point of contact listed. Interested parties must submit proposals through the provided public procurement portal by the stated deadline.

City of Rapid City

POSTED

about 16 hours ago

DEADLINE

Fire-Rated Door Hardware InstallationThe contract involves the supply and installation of UL-listed door hardware on fire-rated and 20-minute labeled openings, requiring integration with both hollow metal and wood doors. The work includes hinges, closers, and locks that meet specified safety and performance standards for fire protection, ensuring compliance with building codes and life safety requirements. All materials and installations must be certified and properly documented to maintain the integrity of the rated assemblies. The procurement is structured as a subcontract under the NAICS code 238990, with a response deadline of September 1, 2026, and was posted on August 8, 2026. The contracting authority is the City of Rapid City in South Dakota, though specific performance location and point of contact details are not provided. Bidders must be prepared to deliver products that are fully compliant with UL listings and capable of seamless installation on diverse door types within the city’s infrastructure projects.

City of Rapid City

POSTED

about 16 hours ago

DEADLINE

Airport Pavement Marking Installation ServicesThe contract involves the installation of taxiway alpha markings at an airport facility, requiring comprehensive surface preparation, accurate layout, and application using approved methods such as spray, extrusion, or tape application, all in strict compliance with technical specifications. The work must be performed to ensure durability, visibility, and adherence to aviation safety standards, with attention to precision in alignment and marking integrity under operational conditions. This subcontract, posted on August 8, 2026, by the City of Stillwater in Oklahoma, has a response deadline of September 2, 2026, and falls under NAICS code 238990 for other specialized construction activities. The place of performance and specific location details are not fully specified in the data provided, and no set-aside information is indicated. All interested parties must review the full technical requirements through the provided online portal to ensure full compliance prior to submission.

City Of Stillwater

POSTED

about 17 hours ago

DEADLINE

Stillwater Regional Airport Taxiway Alpha Markings

Solicitation # 20-2026

The City of Stillwater is soliciting bids for Taxiway Alpha markings at the Stillwater Regional Airport under solicitation number 20-2026, with submissions due by 3:00 p.m. local time on Wednesday, September 2, 2026. Bids must be submitted exclusively through the city’s online procurement portal at https://stillwater.ionwave.net/Login.aspx; mailed, emailed, or faxed responses will not be accepted. Interested contractors are required to complete Supplier Registration on the portal to access bid documents and submit proposals. The public bid opening will occur at 3:00 p.m. on the due date at the Municipal Building, Conference Room 1112 B, 723 South Lewis, Stillwater, Oklahoma, where the City Clerk will open and read the bids aloud. All inquiries about the bid documents must be submitted via the online portal, and direct contact for questions should be made to John McClenny at 405.742.8233 or john.mcclenny@stillwaterok.gov. The work is to be performed at the Stillwater Regional Airport in Oklahoma, and no set-aside or NAICS code information is specified.

City Of Stillwater

POSTED

about 17 hours ago

DEADLINE

Crane Rigger Services (Including Overtime)The contract calls for skilled rigging services to support crane operations at Groton, Connecticut, with a focus on setup, load securing, signaling, and coordination of movement during lifting activities. Services must be performed with precision to ensure safety and efficiency, and contractors are expected to be available for Sunday and holiday overtime work as required. The work falls under NAICS code 238990 for other construction support activities and is structured as a subcontract under the Department of Defense, specifically managed by Navfacsyscom Mid-Atlantic. The solicitation was posted on August 8, 2026, and responses are due by September 8, 2026, with no set-aside provisions specified. Performance will occur at a location in Groton with a zip code of 06349, and all work must adhere to the operational demands of the site and the timeline established by the agency.

Navfacsyscom Mid-Atlantic

POSTED

about 17 hours ago

DEADLINE

in about 1 month

On-Site Installation, Rigging, and Final PlacementThe contract requires the delivery, rigging, and precise placement of an ion mill within Building 81 at the NIST facility in Boulder, Colorado, with a specific focus on the safe and accurate movement of the equipment from the delivery truck to its final location in the lab. This includes all on-site handling, lifting, securing, and positioning to ensure the instrument is installed according to stringent technical and safety standards, with no deviation from the established placement requirements. The work demands specialized expertise in heavy equipment transport and laboratory instrumentation installation, given the sensitivity and precision of the ion mill. The solicitation is classified as a subcontract under NAICS code 238990, with a response deadline of August 20, 2026, and was posted on August 8, 2026. The place of performance is strictly limited to the NIST campus in Boulder, 80305, and the contracting authority is the Department of Commerce through the National Institute of Standards and Technology. No set-aside designation is specified, and the contract does not include point of contact details, indicating that inquiries must be directed through official SAM.gov channels. All work must be executed with full compliance to facility protocols and environmental controls inherent to the laboratory setting.

Department Of Commerce Nist

POSTED

about 17 hours ago

DEADLINE

Project Supervision and Quality AssuranceThis contract requires comprehensive on-site supervision, coordination of subcontractors, and rigorous compliance monitoring to ensure adherence to Naval Postgraduate School and federal contract standards. The work involves detailed documentation and quality assurance activities to maintain regulatory compliance and project integrity throughout the duration of the effort. The contract is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under NAICS code 238990, exclusively reserved for eligible small businesses owned and controlled by service-disabled veterans. The performance location is situated in Yorktown with a zip code of 23690, and all work must be conducted in alignment with federal regulations enforced by the Department of the Interior, specifically through Ner Services Mabo (43000). The solicitation was posted on August 8, 2026, with a firm deadline for responses set for September 14, 2026, at 2:00 PM. Bidders must be certified SDVOSBs and capable of delivering the full scope of services including coordination, compliance, and documentation to support mission-critical federal objectives.

Ner Services Mabo (43000)

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Site Preparation and Demolition of Existing SignsThe contract involves the removal and disposal of existing signs, including the extraction of sign posts, demolition of concrete bases, and complete site cleanup, all conducted under temporary traffic control measures to ensure safety and minimal disruption. The work is classified under NAICS code 238990 for other specialty trade contractors and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, ensuring eligibility is restricted to qualifying small businesses owned by veterans with service-disabled status. The solicitation was posted on August 8, 2026, with a response deadline of September 14, 2026, at 2:00 PM. The place of performance is located in Yorktown, Virginia, with a zip code of 23690, and the awarding agency is the Department of the Interior under the organizational name Ner Services Mabo. The contract is structured as a subcontract and does not include details on point of contact or specific organizational type, but all activities must comply with federal guidelines for environmental and traffic safety standards during demolition and cleanup operations.

Ner Services Mabo (43000)

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Crane Lease/ Rental Services

Solicitation # N4008526R0245

The contract requires the provision of mobile crane leasing and rental services at Naval Submarine Base New London in Groton, Connecticut, with potential performance extending to Naval Station Newport in Rhode Island. The base period is twelve months, beginning September 23, 2026, and is followed by four additional twelve-month option periods, extending the maximum overall term through September 22, 2031. Only the base period carries a minimum guarantee of $5,000, with no minimums required for any option years. The contract is structured as a firm fixed price, indefinite-quantity vehicle, with a total estimated value of $150,000 across the base and all four options. Offerors must submit pricing for five line items, each capped at $30,000, covering an array of crane and equipment leasing scenarios including weekly and monthly rentals of 50-ton and 75-ton cranes, material provisions, and on-site support services. All equipment must be no more than five years old at lease commencement, equipped with a load monitoring indicator, anti-two block system, swage end fittings, and NDT-certified hooks, and must comply with COMNAVREG MIDLANT INSTRUCTION 11262 1, NAVFAC P-307, and 29 CFR 1926 standards. Operators, riggers, and crane mechanics must be qualified and available during regular work hours, with full labor, supervision, transportation, and maintenance included in the offer. Contractors must comply with stringent safety, cybersecurity, and administrative requirements. Cybersecurity compliance requires CMMC Level 1 (Self) certification for systems handling federal contract information. Personnel requiring access to government IT systems must undergo a Tier 3 background investigation, submit OF-306 forms, provide digital fingerprints via E-QIP, and obtain a DBIDS credential for site access. Insurance requirements include $500,000 comprehensive general liability, $200,000 per person automobile liability, and workers' compensation as mandated by federal and state law. The contractor must maintain an organizational chart identifying the project manager, quality manager, site safety and health officer, and on-site supervisors, with the PM or alternate required on-site during all performance. Invoicing must be processed electronically through WAWF, with specific form requirements based on line item type, and all submissions must be routed through designated DoDAAC codes including N44210

Navfacsyscom Mid-Atlantic

POSTED

about 17 hours ago

DEADLINE

in about 1 month

99--COLONIAL NHP - REPLACE ENTRANCE SIGNS

Solicitation # 140P4326R0033

The National Park Service intends to replace entrance signs at Colonial National Historical Park in Yorktown, Virginia, under a firm-fixed price contract to be issued as solicitation number 140P4326R0033. The work encompasses all labor, materials, equipment, permits, safety gear, and professional services required to remove existing signs and install new parkway identification signs in accordance with detailed drawings and specifications provided in the official solicitation. The project is set aside 100% for Service-Disabled Veteran-Owned Small Businesses, with the North American Industry Classification System code 238990 and a size standard of $19.0 million. Federal construction wage rates applicable to York and James City Counties, Virginia, will govern labor compensation. Offerors must be registered and active in SAM.gov with a valid Unique Entity Identifier and must have completed all required Online Representations and Certifications to be eligible for award. The solicitation will be publicly posted on SAM.gov on or about August 24, 2026, with responses due by September 14, 2026, and no hardcopy or emailed copies will be provided. A mandatory site visit will be scheduled and announced in the solicitation, and attendance is strongly encouraged to fully understand site conditions and potential cost impacts. All inquiries should be directed to Contracting Officer Jason Albright at Jason_Albright@ios.doi.gov or (617) 519-6145.

Ner Services Mabo (43000)

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Project Management and Prime CoordinationThe contract under the title Project Management and Prime Coordination requires comprehensive oversight of all subcontractor activities related to the repair effort, including full responsibility for ensuring adherence to standards, timely delivery, proper installation, and formal acceptance of completed work. As a subcontract agreement issued by the Texas Military Department through the Texas SmartBuy portal, the work is classified under NAICS code 238990 for other specialty trade contractors, indicating a specialized scope not covered by broader construction categories. The solicitation is open for responses until August 24, 2026, and performance is expected to occur within Texas, though specific city or zip code details for the place of performance are not provided. The prime contractor must manage all coordination, compliance, and logistical elements to meet contractual obligations without direct agency supervision, making strong project management and subcontractor oversight essential for successful execution.

Texas Military Department

POSTED

DEADLINE

Current Tail Building RepurposingThe contract involves the renovation and repurposing of the existing Tail Building to transform it into a mid-range storage and test facility while ensuring that all ongoing operations continue without interruption throughout the project. The work will require careful planning and execution to maintain functionality of current activities during construction, emphasizing phased implementation, safety protocols, and minimal disruption to daily operations. The project falls under NAICS code 238990, indicating it encompasses other specialized construction services, and is structured as a subcontract under the Texas A&M University System, with Texas designated as the overseeing agency. The solicitation was posted on August 7, 2026, with a response deadline of September 1, 2026, at 8:00 PM, allowing potential contractors a limited timeframe to submit proposals. The place of performance and administrative details, including specific location data and point of contact, are not provided in the available information, but the project is accessible via the Texas SMART BUY portal at the designated web link. Contractors bidding on this subcontract must demonstrate experience in facility renovations, operational continuity management, and compliance with institutional requirements, particularly those of a large public university system. The nature of the procurement suggests a focus on functional adaptability, durability, and integration with existing infrastructure rather than new construction.

Texas A&M University System

POSTED

DEADLINE