Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Multi-Turn Electric Actuator Supplier

Active

State & Local

Response Deadline12/01/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement establishes a partnership for the supply of new, assembled, and tested multi-turn electric actuators to support prime contractors on Jefferson Parish Government drainage projects in Louisiana. The required equipment must meet the specifications of Part # IQ40/86RPM 208/240V 3PH 60HZ or an equivalent standard, with a strict requirement that all units are manufactured, assembled, and tested within the United States. The actuators must feature IP66/IP68 and NEMA 4/6 rated enclosures, local controls, and wireless torque configuration, while maintaining full compliance with EN15714-2 and ISA SP96.02 standards. All completed units are to be delivered directly to the Ames Pump Station Warehouse. The solicitation was posted on October 28, 2026, with a response deadline of December 1, 2026.

General Info

Subcontract for US-made electric actuators for Jefferson Parish Government drainage projects in Louisiana.

Agency

Louisiana → Jefferson Parish Government

NAICS

335312 - Motor and Generator Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 293.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Purchase of Actuators - Drainage

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyLouisiana → Jefferson Parish Government

ContactsNo contacts available

OfficeN/A

Organization / AgencyLouisiana → Jefferson Parish Government

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies new, assembled, and tested electric actuators for prime contractors on Jefferson Parish Government drainage projects. Manufactures actuators meeting Part # IQ40/86RPM 208/240V 3PH 60HZ or equal, assembled and tested in the US. Features IP66/IP68 and NEMA 4/6 rated enclosures, local controls, and wireless torque configuration. Complies with EN15714-2 and ISA SP96.02. Delivers fully assembled actuators to the Ames Pump Station Warehouse.

Similar Contracts

Same NAICS industry code

Supply of Alternating Current Motor (Critical Application)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the procurement and delivery of one alternating current motor, identified as NSN 6105-01-219-4468 and Part Number 801625-069. The item is designated as a Critical Application Item and must strictly adhere to the DLA Master List of Technical and Quality Requirements. Additionally, the supplier is responsible for ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is a Total Small Business Set-Aside under NAICS code 335312, with the place of performance located at FPO 96662. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

Supply of Motor Starter (NSN 6110-01-684-7492)This subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the procurement and delivery of one Motor Starter with NSN 6110-01-684-7492. The selected provider is responsible for sourcing the specific part and ensuring it is packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. All work must adhere to the DLA Master List of Technical and Quality Requirements. Eligible contractors must be registered in the System for Award Management and Wide Area Workflow. The performance location for this requirement is FPO 34089. Responses to this solicitation are due by November 9, 2026, under NAICS code 335312.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-27-Q-0140

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M0-27-T-0821

Solicitation SPE7M0-27-T-0821, issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys, is for the procurement of one alternating current motor, identified as a critical application item with NSN 6105-01-219-4468 and part number 801625-069. The requirement is for a quantity of one unit to be delivered FOB Origin to the USS Charlotte (SSN 766) within five days after receipt of order. While the solicitation is listed as a total small business set-aside under FAR 19.5 in the metadata, the document text explicitly states it is not a small business set-aside. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific packaging and marking standards such as MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and any offerors proposing alternate parts must provide a complete data package for evaluation.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 1 hour ago

DEADLINE

CONTROL, REMOTE SWITCHI

Solicitation # SPE7M1-27-T-1725

Solicitation SPE7M1-27-T-1725 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one Remote Switching Control. The required item is identified by NSN 6110-01-689-5358 and Mack Defense LLC part number 23720272. Delivery is required within 20 days of award, with an original required delivery date of October 26, 2026. The shipment is designated as FOB Origin and must be sent via the fastest traceable means to the 0553 CS BN CO A Composite at Fort Hood, Texas. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, specifically RA001, RP001, and RQ011. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, including NIST SP 800-171 and safeguarding covered defense information, as well as compliance with the Buy American Act and the Berry Amendment. Quotations must be submitted via the DIBBS portal by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE4A6-27-T-7367

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M1-27-T-1729

Solicitation SPE7M1-27-T-1729 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one motor starter, identified by NSN 6110-01-684-7492. The required delivery date is May 29, 2026, with a delivery window of 20 days after receipt of order. The item is to be delivered to the USNS Hershel Williams, with inspection and acceptance occurring at the destination. The procurement is governed by NAICS code 335312 and requires adherence to the Buy American Act and the Berry Amendment. Technical and quality compliance is mandated through the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, RP001, and RQ011. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. The contract incorporates various FAR and DFARS clauses, including those for cybersecurity reporting, hazardous material identification, and the prohibition of certain telecommunications equipment. Payment and invoicing must be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

800 HP Industrial Pump Motor SupplierThis subcontract involves the supply of one 800 HP industrial motor intended for prime contractors working on drainage pump projects for the Jefferson Parish Government in Louisiana. The required equipment must be a Westinghouse Model VSKP8004 or an equivalent model featuring a 4 Pole, 3-Phase configuration, Frame No. 5810, NEMA Design B, and F Class Insulation. Essential mechanical specifications include a vertical solid shaft and a non-reverse ratchet mechanism. The selected supplier is responsible for providing the motor along with comprehensive technical documentation, including data sheets, cutaway drawings, and a full Bill of Materials. This opportunity was posted on October 28, 2026, with a response deadline set for December 1, 2026.

Jefferson Parish Government

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Power Conditioner (NSN 6110-01-518-6864) Manufacturer/SupplierThis subcontract involves the manufacture and supply of two Power Conditioners (NSN 6110-01-518-6864) for prime contractors under DLA supply contracts. The selected supplier must fabricate the units according to design references from Cage Codes 07482 or K0653 and ensure all physical identification and marking comply with MIL-STD-130, REV N. Due to the handling of Federal Contract Information or Controlled Unclassified Information, the provider is required to possess CMMC unique identifiers. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the contract falls under NAICS code 335312. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of November 27, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 14 hours ago

DEADLINE

in about 1 month

800 HP Industrial Motor SupplierThis subcontract agreement involves the procurement of one 800 HP industrial electric motor intended for prime contractors working on Jefferson Parish Drainage Department projects. The selected supplier is responsible for manufacturing or sourcing a motor that adheres to specific technical requirements for drainage and pumping applications, ensuring full compatibility with existing parish infrastructure and managing all necessary packaging for transport. Managed by the Jefferson Parish Purchasing Department in Louisiana, the contract falls under NAICS code 335312. The solicitation was posted on October 28, 2026, with a response deadline set for December 1, 2026. The primary objective of the agreement is the successful delivery of one completed high-horsepower motor to support critical water management infrastructure.

Jefferson Parish Purchasing Department

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Supply of Electrical Engine Starters (NSN 2920012735833)This subcontract involves the procurement and delivery of one electrical engine starter for prime contractors supporting DLA supply contracts. The required component is identified by NSN 2920012735833, specifically requiring either General Motors part number 10461109 or BorgWarner part number 1993761. All items must be packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The contract is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in Hamilton. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 335312.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Direct Current Motor ManufacturingThis subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the manufacture and supply of 10 Direct Current Motors under NSN 6105-99-300-5612. The project involves the fabrication and assembly of these motors in accordance with Critical Safety Item quality management systems and strict adherence to the Buy American Act and Berry Amendment. All completed units must be marked according to MIL-STD-129 and delivered to Jacksonville. To be eligible, contractors must hold SAE AS9100 certification and have completed a CMMC Level 2 Self-Assessment. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 335312. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Louisiana → Jefferson Parish Government

Same awarding agency

Various Warehouse Supplies - Eastbank

Solicitation # 314

POSTED

about 2 hours ago

DEADLINE

YaheeTech Mobile Computer Desk SupplierThis subcontract agreement establishes the procurement and delivery of YaheeTech Tiny Mobile Computer Desks for prime contractors working on Jefferson Parish Government projects, specifically for the Woodmere Youth Center. The scope of work involves providing one assembled-ready unit measuring 22 inches in length, 20 inches in width, and 31.5 inches in height. These 3-tier rolling carts are constructed from finished metal and water-resistant E1-compliant MDF panels and must be delivered with all necessary assembly tools. The contract is categorized under NAICS code 423220 and is associated with the Louisiana agency for Jefferson Parish Government. The solicitation was posted on October 28, 2026, with a response deadline set for November 10, 2026.

Home Furnishing Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Computer Desk - Recreation

Solicitation # 320

The Jefferson Parish Government of Louisiana has issued solicitation number 320 for the purchase of a computer desk for the Woodmere Youth Center within the Recreation Department. The procurement specifically requires one YaheeTech Tiny Mobile Computer Desk, which is a black 3-tier rolling cart featuring a drawer. The desk must have assembled dimensions of 22 inches in length, 20 inches in width, and 31.5 inches in height, with a water-resistant treatment on all surfaces for easy cleaning. The technical specifications define specific weight capacities for the unit, including 66.1 pounds for the top, 44.1 pounds for the middle shelf, 22 pounds for the bottom shelf, and 4.4 pounds for the drawer. All necessary tools and accessories for assembly must be included. The solicitation was posted on October 28, 2026, with a response deadline of November 10, 2026. Christopher Lucas serves as the primary point of contact for this local government procurement.

POSTED

about 2 hours ago

DEADLINE

Motors, Blowers, Electrical Items - Westbank

Solicitation # 325

POSTED

about 4 hours ago

DEADLINE

Fire Hose Fittings and Hardware SupplyThis subcontract opportunity with the Jefferson Parish Government in Louisiana involves the supply of essential fire hose fittings and hardware for prime contractors working on fire suppression equipment procurements. The scope of work includes providing brass fire hose nozzles, brass hex nipple adapters, and hydrant hose nozzle adapters compatible with New Orleans Thread to MIPT or National Hose Thread. All components must be manufactured using satin brass and anodized aluminum extrusion in accordance with NPSH and NST/NH threading standards. The contract focuses on the delivery of individual hardware components, with a response deadline set for November 10, 2026.

POSTED

about 4 hours ago

DEADLINE

Industrial Gasket and Rubber Sheet SupplyThis subcontract with the Jefferson Parish Government in Louisiana focuses on the supply of industrial gaskets and rubber sheeting intended for prime contractors working on fire suppression equipment procurements. The scope of work includes the delivery of Blue-Guard 3000 drop-in ring gaskets ranging from 3 to 48 inches, full-face textured red rubber flange gaskets from 3 to 30 inches, and raw gasket sheets available in both black rubber neoprene and red rubber. All supplied materials must adhere to 150 PSI / 150# pressure ratings and can be delivered as individual gaskets or in rolls of sheeting. The procurement is categorized under NAICS code 333220. Interested parties must note that the response deadline for this opportunity is November 10, 2026, following a posting date of October 28, 2026.

Plastics and Rubber Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

Fire and Water Discharge Hose SupplyThis subcontract for the Jefferson Parish Government in Louisiana involves the supply of various fire and water discharge hoses for prime contractors working on fire suppression equipment procurements. The scope of work includes providing 1-1/2 inch double jacketed hoses with brass NH couplings, 2-1/2 inch single jacket polyester hoses, 3 inch and 4 inch layflat blue PVC hoses with nylon woven carcasses, and 2 inch rubber discharge hoses featuring plated king nipples. All deliverables must be provided as completed hose assemblies. A critical technical requirement is adherence to NFPA 1692 standards for the 2-1/2 inch hoses, which must undergo a 500 PSI proof test. The opportunity is categorized under NAICS code 333991, with a response deadline set for November 10, 2026.

Power-Driven Handtool Manufacturing

POSTED

about 4 hours ago

DEADLINE

One(1) Year Contract - Fire Hoses, Gaskets, Nipples

Solicitation # 307

The Jefferson Parish Government of Louisiana is seeking a one-year contract under solicitation number 307 for the supply of fire hoses, gaskets, nipples, and related hose fittings for the Jefferson Parish Engineering Department. The procurement includes a wide array of hardware, such as brass fire hose nozzles, various gasket sheets in black rubber neoprene and red rubber, and flange gaskets ranging from 3 to 30 inches. Additionally, the scope covers drop-in ring gaskets made of Blue-Guard 3000 material with a 150 PSI rating and 1/16 inch thickness, ranging from 3 to 48 inches. Technical requirements specify that 2-1/2 inch fire hoses must adhere to NFPA 1692 standards and undergo a 500 PSI proof test. The agency accepts products from brands such as Dixon, Grainger, Evertite, and Jason Industries, or their approved equivalents. The solicitation was posted on October 28, 2026, with a response deadline of November 10, 2026. Primary point of contact for this effort is Christopher Lucas.

POSTED

about 4 hours ago

DEADLINE

Bolts, Conduits, and Other Supplies - Westbank

Solicitation # 311

POSTED

about 4 hours ago

DEADLINE

Industrial Equipment Freight ServicesThis subcontract for Industrial Equipment Freight Services involves the transportation of heavy industrial actuators from various US manufacturing sites to the Ames Pump Station Warehouse in Marrero, Louisiana. The services support prime contractors working on drainage projects for the Jefferson Parish Government. Deliveries must be coordinated between 7:00 AM and 3:00 PM, Monday through Friday, adhering to a 25-week lead time. The selected provider is required to hold all necessary commercial trucking licenses and insurance to ensure equipment is delivered in good condition. This opportunity, categorized under NAICS code 484220, was posted on October 28, 2026, with a response deadline of December 1, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Actuator Integration and Technical Guidance SpecialistThis subcontract for an Actuator Integration and Technical Guidance Specialist involves providing field verification and technical training for prime contractors working on Jefferson Parish Government drainage projects. The selected specialist will conduct site visits to the Westwego 2 Pump Station to ensure proper system integration and deliver four hours of on-site technical guidance to Parish personnel covering installation, routine maintenance, and troubleshooting. To qualify for this engagement, the provider must utilize manufacturer-certified technical representatives. The project is categorized under NAICS code 811210 and is managed by the Jefferson Parish Government in Louisiana, with a response deadline set for December 1, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Heavy Equipment Transport and Delivery (Marrero, LA)This subcontract involves the specialized transport and delivery of one 800 HP industrial motor for prime contractors working on Jefferson Parish Government procurement projects. The selected provider will be responsible for moving the unit from the supplier to the Ames Warehouse in Marrero, Louisiana, utilizing flatbed trucks or heavy-haul trailers. To ensure the integrity of the equipment, the contractor must employ professional rigging and securing methods to maintain strict shaft and flange tolerances. The delivery must be completed at the designated warehouse during established business hours. This opportunity is categorized under NAICS code 484220 and was posted on October 28, 2026, with a response deadline of December 1, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS