This Solicitation opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

N0010426QX099_CIRCUIT CARD ASSEMB

Closed

N0010426QX099Federal

Submission Closed07/24/2026, 07:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M5-26-T-366A

Solicitation SPE7M5-26-T-366A is a fixed-price procurement issued by the Defense Logistics Agency's Active Devices Division for three circuit card assemblies under NSN 5998-01-729-3395. The requirement specifies restricted source items with approved part numbers from A-10 Compressed Air Services, LLC, Zeks Air Drier Corp, and Ingersoll-Rand Industrial U.S., Inc. Delivery is required within 113 days after receipt of order, with a need ship date of December 23, 2025, and an original required delivery date of May 22, 2026. Items are to be delivered FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking and labeling. Special requirements include a prohibition on Class I ozone-depleting chemicals and mandatory hazard warning labels per 29 CFR 1910.1200 for any hazardous materials. Administrative compliance requires electronic invoicing through the Wide Area Workflow system and adherence to various DFARS and FAR clauses regarding cybersecurity, covered defense information, and the prohibition of telecommunications equipment from specific foreign entities. Offerors must submit proposals via the DIBBS portal by August 14, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-248F

Solicitation SPE7M1-26-T-248F, issued by DLA Land and Maritime, is for the procurement of 12 units of a Circuit Card Assembly (NSN 5998017076664). The contract requires delivery within 157 days after receipt of order, with shipping terms set as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions and includes a requirement for a CMMC Level 2 Self-Assessment. Offerors must submit quotes via the DIBBS portal, and the submission of a Safety Data Sheet is a mandatory pass/fail gate for award eligibility. Technical compliance is heavily focused on protection and quality standards. The items must be handled and packaged at approved field force protective workstations using DOD qualified ESD and EMI protective materials per MIL-PRF-81705. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the intentional use of mercury or mercury compounds per NAVSEA 5100-003D. Quality assurance will be conducted at the destination using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Invoicing and payment will be processed electronically through the Wide Area Workflow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # N0038326QAA64

This solicitation, issued by Navsup Weapon Systems Support, seeks a contractor to provide repair and overhaul services for the Remote Interface Unit (P/N 7RH 5998 998458308 P8). The work must be performed in accordance with GE Aviation Systems LLC drawings and specifications to return assets to a Ready For Issue condition. The contractor is responsible for providing all necessary labor, materials, and tooling, with a strict requirement to maintain a quality system conforming to ISO 9001 or SAE AS9100 standards. Key performance metrics include a Repair Turnaround Time of 70 days after receipt of the asset and an induction expiration date set for 365 days after the contract award. The contract establishes specific protocols for handling items that are Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair, all of which require written concurrence from DCMA and the Procuring Contracting Officer. Supplies are covered by a 365-day warranty after delivery, and all terms are governed by Basic Ordering Agreement N00383-24-G-B601.

Navsup Weapon Systems Support

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF8

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks the manufacture of a circuit card assembly. The contract is designated as DO certified for national defense under the Defense Priorities and Allocations System and is being processed under Emergency Acquisition Flexibilities. Key requirements include adherence to ISO 9001 quality systems, MIL-STD-129 marking, and strict electrostatic discharge control per ANSI/ESD S20.20. Additionally, the material must be entirely free of metallic mercury to prevent corrosion and toxicity on submarines and surface ships. The government retains an option to order an additional quantity of up to 100% of the original order at the same price for 365 days after receipt of the award. A one-year warranty from the date of delivery is required. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on the manufacturer's letterhead to be considered for the award. All contractual documents will be issued bilaterally, requiring written acceptance from the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAES

This solicitation, issued by the Navsup Weapon Systems Support Mech, is for the manufacture and procurement of a circuit card assembly. The contract is designated as a rated order under the Defense Priorities and Allocations System for national defense. Key technical requirements include strict adherence to electrostatic discharge control standards and a total prohibition of metallic mercury to prevent contamination on submarines and surface ships. The government maintains an option to order an additional quantity of up to 100 percent of the original order at the same price for 365 days after the award. The contract requires a one-year warranty from the date of delivery and mandates that all items be physically identified according to MIL-STD-130. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on the manufacturer's letterhead to be considered for the award. Quality assurance is primarily the responsibility of the contractor, though the government reserves the right to perform inspections. All contractual documents are issued bilaterally and require written acceptance by the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QXC03

This solicitation is a high priority requirement issued by the Navsup Weapon Systems Support Mechanicsburg for the repair of a Circuit Card Assembly. The government is seeking quotes based on firm-fixed-price, not-to-exceed, or estimated pricing, specifically excluding quotes limited only to test and evaluation. Awardees must be authorized repair sources and adhere to strict IUID requirements, MIL-STD packaging, and Government Source Inspection. The contract emphasizes a strict Repair Turnaround Time (RTAT), with a price reduction penalty applied per unit per month for any inexcusable contractor delays. Contractors must provide their throughput constraints and a specific price reduction amount for late deliveries. All submissions must be sent electronically to the designated point of contact, and the final award will be issued bilaterally, requiring written acceptance from the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QHE84

This solicitation is for the manufacture and procurement of a multifunction calibrator for the Department of Defense, managed by DLA Weapons Support Mechanicsburg. The acquisition is for non-commercial items and will be evaluated based on the Lowest Price Technically Acceptable criteria. The contract is a total small business set-aside and requires strict adherence to cybersecurity maturity model certification and equal opportunity for veterans regulations. Key technical requirements include physical identification per MIL-STD-129 and a strict prohibition of metallic mercury to prevent contamination on submarines and surface ships. The contractor must maintain an ISO 9001 quality system and submit all invoices and receiving reports electronically via PIEE-WAWF. If the offeror is not the original equipment manufacturer, they must provide the OEM's CAGE code and part number, as well as proof of authorized distributorship.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QNE47

This solicitation, issued by the Navsup Weapon Systems Support Mech, seeks quotes for the repair of several specific components, including electronic control panels, printed wiring boards, and circuit card assemblies. The requirement covers a total of 24 units across five different National Stock Numbers. The government requires a requested repair turnaround time of 169 days and mandates government-source inspection and acceptance. New procurement or replacement of these items will not be considered. Key contractual requirements include strict adherence to mercury-free materials for use on submarines and surface ships, as well as compliance with electrostatic discharge control standards for electronic assemblies. The government retains the option to order an additional quantity up to 100 percent of the original order for 288 days after the award at the same price. Quotes must be submitted via email to the designated point of contact and must include unit repair pricing, beyond repair pricing, and throughput capacity.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # SPRMM126RGE84

The Government is seeking to procure 30 units of a circuit card assembly identified by NSN 7G-5998-016306554 under a sole-source procurement authorized by FAR 6.302-1, due to the unavailability of competitive sources. The part is subject to proprietary data restrictions, and the Government has determined it is uneconomical to acquire the underlying data rights or to reverse engineer the component, limiting procurement to the original manufacturer or a single qualified source. Delivery will be FOB origin, and no competitive solicitation is planned, though responsible parties may submit capability statements within 45 days of the notice’s publication, or 30 days if an existing Basic Ordering Agreement applies, for the Government’s consideration in determining whether to proceed with competition. All data and technical documentation related to this item, including Military Specifications, Qualified Products Lists, and Federal Standards, must be obtained through the DODSSP via the ASSIST-Online portal or by direct request to the DLA Document Services office; however, proprietary items such as drawings, patterns, and deviation lists are not accessible through these channels. The acquisition is outside the scope of FAR Part 12 commercial item procedures, and while the Government may consider proposals for commercial alternatives, interested parties must notify the contracting officer within 15 days. The contracting office is part of the Department of Defense’s SPRMM1 DLA Mechanicsburg in Pennsylvania, with primary point of contact Brendan T. Heasley, and the solicitation notice was issued on July 21, 2026, with responses due by September 4, 2026. No contract value, delivery schedule, packaging requirements, evaluation criteria, or formal contract clauses have been established at this pre-solicitation stage, as this notice serves solely as a market survey to gauge industry capability.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM126QGD31

This contract pertains to the manufacture and supply of a CIRCUIT CARD ASSEMB, governed by stringent quality, inspection, and documentation standards. The contractor must adhere to MIL-STD-130 Rev N for item marking and comply with all specified technical and quality assurance requirements outlined in the contract, including maintaining comprehensive inspection records for 365 days after final delivery. Inspection responsibilities rest solely with the contractor unless otherwise directed by the Government, and no design, material, or part number changes may be implemented without prior written approval from the NAVICP-MECH Contracting Officer, with specific codes required to classify the nature of any proposed modification. The contract mandates delivery to a designated facility, with packaging and preservation strictly following MIL-STD-2073, and all documentation must align with applicable Department of Defense standards and references available via DODSSP and Quicksearch. Subcontracting, production facility changes, and distribution restrictions are tightly controlled: any relocation of production must meet four criteria including a $250 administrative cost reduction and cannot affect small business performance or delivery timelines, and approval remains at the Government’s sole discretion. Only authorized distributors of the original equipment manufacturer may submit bids, requiring formal proof of authorization. Electronic submission via PIEE-WAWF is mandatory for invoices and receiving reports, and contractors must register for the Electronic Document Access (EDA) portal to monitor orders and modifications. The Government retains rights to inspect at source and to restrict distribution of technical data, with specific DO NOT FORN and other distribution statement codes governing information access. All contractual documents are deemed issued upon electronic transmission, and proposals must include OEM CAGE codes and contact details for follow-up. The solicitation closes on July 27, 2026, under the NAICS code 334412, managed by DLA Mechanicsburg, with full compliance required across all regulatory and procedural frameworks applicable to defense procurement.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QEE40

This solicitation is for the manufacture and design of a circuit card assembly, specifically part number K10048993-501(MTS) from L3 Technologies, Inc. The contract is issued by the Department of Defense via Navsup Weapon Systems Support Mech and is categorized under NAICS code 334412. Key technical requirements include strict adherence to specified drawing revisions, a total prohibition on the intentional use of mercury, and compliance with specific packaging standards, including MIL-PRF-23199 and MIL-STD 2073. The agreement utilizes a fixed-price structure with FOB-destination shipping and requires the use of Wide Area Workflow for payment processing. Quality assurance is mandatory, requiring the contractor to maintain an inspection system acceptable to the government. Additionally, the contract incorporates various federal mandates, including equal opportunity requirements for veterans and workers with disabilities, cybersecurity maturity model certification, and specific distribution statements for the safeguarding of technical documents. Pricing for quotations remains valid for 60 days following the closing date.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE49

This solicitation is for the repair of specific electronic components, including five units of NSN 5998 015597249, five units of NSN 5998 016226833, and one unit of NSN 7010 016606167. The government requires government-source inspection and acceptance and has set a requested repair turnaround time of 294 days. New procurement or replacement items will not be considered. The government also retains an option to order an additional quantity up to 100 percent of the original order for 412 days after the award at the same price. Contractors must adhere to strict quality and safety standards, including electrostatic discharge control and a total prohibition of metallic mercury contamination. All repair work must be performed according to the contractor's standard practices and approved technical manuals. Quotes must be submitted via email to the designated point of contact and must include unit repair pricing, beyond repair pricing, and throughput constraints. The government will not accept quotes for teardown and evaluation only.

Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days

AI Contract Overview

The contract solicitation N0010426QX099 is for the repair of 20 units of a circuit card assembly identified by NSN 5998012719718, issued by the Naval Supply Systems Command Weapon Systems Support Mechanic under the Department of Defense. The solicitation was posted on July 16, 2026, with a firm response deadline of July 24, 2026, at 7:30 PM EST, and no set-aside provisions are applied, making it open to all eligible contractors. The North American Industry Classification System code 334412 indicates the work falls under electronic component and product manufacturing. Performance is not restricted to a specific location, and all repairs are to be coordinated through the contracting office located in Mechanicsburg, Pennsylvania, 17050-0788. Primary point of contact for inquiries is Stephanie Perez, reachable via email at stephanie.r.perez7.civ@us.navy.mil, and further details can be accessed through the SAM.gov portal.