Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Printed Circuit Board Supply and Delivery

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement and delivery of a single printed circuit board identified by NSN 5998015156765, part number 1741785, and CAGE code 11083, to a U.S. Navy vessel located at a Fleet Post Office address. Delivery must adhere to FOB Destination terms, meaning the supplier assumes all responsibility and risk until the item is officially received at the final military destination. Full compliance with U.S. Department of Defense military logistics protocols, including documentation, packaging, labeling, and tracking, is mandatory to ensure seamless integration into naval supply chains. The item falls under NAICS code 334412, indicating it is manufactured within the printed circuit board and assembly industry, and the contract is classified as a subcontract under the Defense Logistics Agency’s oversight. Performance is tied to strict military delivery windows and requirements, with no flexibility allowed in specifications or procedures.

General Info

Procure and deliver one printed circuit board to U.S. Navy vessel under FOB Destination with full DOD compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334412 - Bare Printed Circuit Board Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26FB243.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRINTED CIRCUIT BOARD

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure and deliver one printed circuit board (NSN 5998015156765, P/N 1741785, CAGE 11083) to a U.S. Navy vessel at an FPO address under FOB Destination terms, with full compliance to military logistics and delivery requirements.

Similar Contracts

Same NAICS industry code

PRINTED CIRCUIT BOA

Solicitation # SPE7M5-27-T-1591

Solicitation SPE7M5-27-T-1591 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of five printed circuit boards, identified by NSN 5998016434816. The required delivery date is March 2, 2027, with a delivery window of 112 days after the award. Shipping is FOB Origin, and the destination for both inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including CMMC Level 2 Self-Assessment and the prohibition of intentionally added mercury. Packaging is a critical requirement, necessitating DOD qualified Electrostatic Discharge and Electromagnetic Interference protective materials per MIL-PRF-81705 and MIL-STD-2073-1E to prevent damage to leads and terminals. Marking must comply with MIL-STD-129, specifically using special marking code 39 for ESD sensitive electronic devices. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-0840

Solicitation SPE7M1-27-T-0840 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight GE FANUC Embedded Systems Inc. circuit card assemblies, part number PMC942RC, under NSN 5998-01-628-2855. The requirement falls under NAICS code 334412. The need ship date is June 12, 2027, with an original required delivery date of June 6, 2027. Delivery is established as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements listed in the DLA Master List, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special safety and security provisions apply, including a prohibition on intentionally added mercury per NAVSEA 5100-003D, a requirement for CMMC Level 2 Self-Assessment, and compliance with Covered Defense Information standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. All quotations must be submitted via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M5-27-T-1585

Solicitation SPE7M5-27-T-1585 is a federal procurement issued by the DLA Weapons Support Active Devices Division for the acquisition of five circuit card assemblies. The required items are identified by NSN 5998016919292 and part number 9800-96605-0002 from DRS Network and Imaging Systems LLC. These components are designated as critical application items. The contract specifies a delivery timeline of 56 days after receipt of order, with a need ship date of January 5, 2027, and an original required delivery date of May 29, 2027. Shipping is established as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The procurement is governed by several technical and quality standards, including RA001 for general requirements, RQ002 for configuration change management, and RQ011 for the removal of government identification from non-accepted supplies. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, specifically those regarding cybersecurity safeguarding, the Buy American Act, and prohibitions on the acquisition of certain telecommunications equipment.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-1665

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Circuit Card Assembly Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies to support DLA supply contracts for the Department of Defense, specifically through the Pa DLA Aviation At Philadelphia. The scope of work includes fabricating printed circuit boards, sourcing and populating components using SMT or through-hole assembly, and performing functional verification with testing equipment. The primary deliverable consists of three units of NSN 5998-01-462-4333. The contractor must ensure strict compliance with the Buy American Act regarding domestic origin requirements. Additionally, the provider is responsible for reporting end items via IUID through the IUID Registry or WAWF. This opportunity falls under NAICS code 334412, with a response deadline set for November 6, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAJB

Solicitation N0010426QYAJB is a fixed-price request for quotations issued by the Navsup Weapon Systems Support Mech for the teardown, evaluation, repair, and modification of a circuit card assembly, NSN 5998-01-577-3864. The contractor is required to perform all work in accordance with original manufacturer specifications and drawings, adhering to strict quality standards including ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent contamination on submarines and surface ships. Delivery is required within 111 days on a FOB Destination basis, with all items physically identified and packaged according to MIL-STD-129, MIL-STD-130, and MIL-STD-2073. Due to the nature of the equipment, the contractor must possess a government security clearance and authorized access to Secret level classified documents as detailed in DD Form 254. Award evaluations will be based on Supplier Performance Risk System assessments regarding item, price, and supplier risk. The contractor must maintain inspection records for 365 days following final delivery and utilize the Wide Area Workflow system for electronic invoicing. Additional compliance is required for cybersecurity maturity model certification and the detection and avoidance of counterfeit electronic parts.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF8

Solicitation N0010426QYAF8, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a request for quotations for the manufacture and delivery of a Circuit Card Assembly (NSN 5998-01-616-3772). The procurement requires strict adherence to Technical Data Package version 002 and mandates that the supplier maintain a quality system compliant with ISO 9001 or MIL-I-45208. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and a strict mercury-free mandate for use on submarines and surface ships. The contract includes an option for additional quantities up to 100 percent for 365 days after receipt of the order. The government will evaluate offers based on the Supplier Performance Risk System, focusing on item, price, and supplier risk, while prioritizing U.S.-made or qualifying country end products. Award consideration is limited to original equipment manufacturers or authorized distributors who can provide a signed letter of authorization. Deliverables must be marked per MIL-STD-129 and packaged according to MIL-STD-2073-1, with specific packing levels based on the destination. Inspection and acceptance will occur at the origin, and all payment requests must be processed electronically through the Wide Area Workflow system. Following two amendments, the final response deadline for offers is October 28, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAES

Solicitation NO0104-26-Q-YAES is a small business set-aside request for quotations issued by the Department of the Navy, NAVSUP Weapon Systems Support Mech, for the manufacture and delivery of circuit card assemblies (NSN 5998-01-577-3862). The required items must conform to the design represented by Cage Code 03538 and reference number 77C733426G1, utilizing TDP Version 002. Key technical requirements include strict adherence to ANSI/ESD S20.20 for electrostatic discharge control and a total prohibition of metallic mercury to prevent corrosion and toxicity on submarines and surface ships. The contract specifies a delivery timeline of 180 days with FOB Destination terms and requires a one-year warranty from the date of delivery. The procurement process includes several critical compliance and quality standards. Items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073, with specific labeling requirements for Depot Level Repairable items. Inspection and acceptance will occur at the origin, with the contractor holding primary responsibility for quality assurance. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization on OEM letterhead. Evaluation of quotes will be based on Supplier Performance Risk System assessments, focusing on item, price, and supplier risk. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAF9

Solicitation N00104-26-Q-YAF9, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks quotations for the manufacture and delivery of a circuit card assembly, identified by NSN 5998-01-680-8202 and Cage Code 03538. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense. The government maintains an option to order an additional quantity of up to 100 percent of the original order at the same price for 365 days after receipt of order. The closing date for the receipt of offers has been extended to November 05, 2026. The contractor must adhere to strict quality and technical standards, including ISO 9001 quality system requirements and ANSI/ESD S20.20 for electrostatic discharge control. Supplies must be mercury-free and packaged according to MIL-STD-2073-1 and marked per MIL-STD-129. Delivery is required within 180 days, FOB Destination, with inspection and acceptance occurring at the origin. A one-year warranty from the date of delivery is required for these noncomplex supplies. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization on the OEM's letterhead to be considered for award. Invoicing and payment will be processed electronically via Wide Area Workflow.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRPA127QZA36

Solicitation SPRPA127QZA36, issued by DLA Aviation at Philadelphia, is a request for quotations for five newly manufactured Circuit Card Assemblies (NSN 5998-01-728-8235). This procurement is designated for Critical Safety Items (CSI) and Critical Application Items (CAI), requiring strict adherence to quality management standards such as AS/EN/JISQ 9100 or an equivalent system. The government will make a single award based on the most advantageous offer, with past performance weighted as more important than price. Proposals are due by November 6, 2026, and must be submitted to the primary point of contact, Naseem Aoun. The contract mandates that all supplies be newly manufactured; refurbished or repaired materials are ineligible for award. Offerors must be government-approved sources of supply, and authorized distributors must provide a formal authorization letter on the source's letterhead at the time of proposal. Technical requirements include strict packaging and marking standards per MIL-STD-2073 and MIL-STD-129, with specific electrostatic discharge protection required for sensitive items. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and receiving reports, with delivery terms set as FOB Destination.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMB

Solicitation # N0010426QYAEQ

This solicitation, issued by NAVSUP Weapon Systems Support, is for the manufacture and procurement of a circuit card assembly under NAICS code 334412. The requirement is processed under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The government maintains an option to order an additional quantity of up to 100 percent for 365 days after receipt of the order at the same price. The resultant award will be issued bilaterally, requiring written acceptance from the contractor. Key technical requirements include strict adherence to electrostatic discharge control standards and a total prohibition of metallic mercury contamination, as the items are intended for use on submarines and surface ships. Quality assurance must comply with MIL-I-45208 or ISO 9001 standards, and the contractor is responsible for all inspection requirements. Offerors who are not the original equipment manufacturer must provide a signed letter of authorization from the OEM to be considered. The solicitation closing date was extended via Amendment 0001 to September 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QLA02

Solicitation NO00104-27-Q-LA02 is a Request for Quotations issued by the NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of a Computer CCA (NSN 5998-01-600-9910). The contractor is required to ensure the repaired item meets all operational and functional requirements using approved repair standards and manuals. Key performance metrics include a required Repair Turnaround Time (RTAT) of 170 days, measured from the physical receipt of the asset to final government acceptance. The contract mandates Government Source Inspection (GSI) and requires the contractor to maintain inspection records for 365 days following final delivery. Compliance requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-129 and MIL-STD-2073-1 for packaging and marking. All shipments are FOB Origin, and electronic invoicing must be processed through the Wide Area Workflow system. Award consideration is limited to authorized distributors of the original manufacturer, with evaluations based on price and past performance as tracked via the DoD Supplier Performance Risk System. Additionally, offerors must provide CMMC unique identifiers and comply with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 2 months

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 19 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Circuit Card Assembly Manufacturing & Delivery

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

PRINTED CIRCUIT BOARD

Solicitation # SPE7LX26FB243

Defense Logistics Agency

POSTED

DEADLINE

PRINTED CIRCUIT BOARD

Solicitation # SPE7LX26FB269

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-010H

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

ELECTRONIC COMPONEN

Solicitation # N0010425QSB89

Navsup Weapon Systems Support Mech

POSTED

CLOSED

TPS COMPUTER ASSY,A

Solicitation # N0038326QPB94

Navsup Weapon Systems Support

POSTED

CLOSED

AMPLIFIER,RADIO FRE

Solicitation # N0010426QXB70

Navsup Weapon Systems Support Mech

POSTED

CLOSED

KIT,CCA,CONROLLER

Solicitation # SPRMM126QHC38

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QGE89

SPRMM1 DLA Mechanicsburg

POSTED

CLOSED

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYABE

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Supply of Telephones (NSN: 5805-01-728-8548)

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

CLOSED

Current Sensor Manufacturing and Supply

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS