Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Naval Injector Assembly Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of five units of a military specification compliant injector assembly, identified by NSN 2910013298347, for delivery to the USS PORTLAND LPD 27 located in San Diego, California. The delivery must be completed no later than July 30, 2026, ensuring compliance with all relevant military standards and performance requirements. This is a subcontract under the umbrella of the Department of Defense, managed by the Defense Logistics Agency, with the North American Industry Classification System code 336612 indicating its alignment with aircraft and parts manufacturing. The agreement is publicly accessible via a DIBBS portal link, though specific contractual terms, pricing, and point of contact details are not disclosed in the provided data. The place of performance and office address fields remain unspecified, suggesting that logistical coordination may be handled through broader defense supply channels rather than direct local office interaction.

General Info

Five military-spec injector assemblies to be delivered to USS PORTLAND by July 30, 2026, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 5 units of a MIL-SPEC compliant injector assembly (NSN 2910013298347) for delivery to USS PORTLAND LPD 27 in San Diego, CA by July 30, 2026.

Similar Contracts

Same NAICS industry code

Barge Structural Conversion and WeldingThe contract involves the structural conversion of an inland river hopper barge into a flat deck barge, requiring the complete removal of existing hopper sections, reinforcement of the deck structure for enhanced load-bearing capacity, and the application of marine-grade welding techniques to ensure durability and seaworthiness. All work must adhere to industry standards for marine fabrication and safety, with the intent of transforming the vessel for new operational use as a flat-deck platform suitable for transporting heavy or oversized cargo. The solicitation is listed as a subcontract under NAICS code 336612, indicating a focus on ship and boat building and repairing, with a response deadline of August 7, 2026, and a posting date of July 20, 2026. The contract is administered by the Mississippi Department of Finance and Administration, with performance expected to occur in Mississippi, though the exact location is unspecified. There is no set-aside designation, and the point of contact details are not provided in the posting. Interested parties must review the official link for full technical specifications and submission requirements.

POSTED

DEADLINE

Supply of BREATHER Component for Naval Submarine (NSN 2815012094587)The contract entails the procurement and delivery of a single commercial off-the-shelf BREATHER component identified by NSN 2815012094587 and part number 4W3027, intended for installation aboard the USS NORTH CAROLINA (SSN-777). The item must be delivered under FOB destination terms, meaning the supplier is responsible for all transportation costs and risks until the component reaches its final destination. Inspection is required at both the origin and destination to ensure compliance with specifications and to verify condition prior to and upon receipt. This procurement is classified under NAICS code 336612, indicating it pertains to aerospace product and parts manufacturing, and is issued as a subcontract under the Defense Logistics Agency on behalf of the Department of Defense. The contract was posted on July 20, 2026, and is associated with the award reference SPE7LX26FB04E. No set-aside provisions apply, and while no specific point of contact or detailed delivery location is provided, the component must meet all military requirements for integration into the submarine's systems, with full traceability and quality assurance maintained through the inspection process.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabrication and Assembly of Marine Vessel ComponentThe contract pertains to the precision fabrication and assembly of a mission-critical naval component known as the BOW CORNER SEGMENT #2 (ASSEMBLY), PORT, designed for use on defense marine platforms. It demands stringent adherence to advanced engineering standards, the use of certified materials compliant with defense specifications, and rigorous quality control protocols throughout production to ensure structural integrity and operational reliability under extreme maritime conditions. The work must be executed in compliance with defense industry benchmarks, with emphasis on dimensional accuracy, material traceability, and inspection verification at every stage of manufacturing. The contract is classified as a subcontract under the NAICS code 336612, indicating its focus on ship and boat building and repairing. It is managed by the Fluid Handling Division of the Department of Defense, with performance required at a designated facility in Virginia Beach, Virginia, ZIP 23459-3018. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, leaving a narrow window for qualified vendors to submit proposals. The nature of the component and its application on defense vessels necessitates compliance with sensitive security and supply chain requirements, though specific set-aside provisions or point of contact details are not provided.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Marine Toilet Supply (NSN: 4510-01-602-2193)The contract calls for the supply and delivery of one marine toilet per CLIN, specifically complying with the National Stock Number 4510-01-602-2193 and the manufacturer’s technical specifications for the Dometic Sealand model P/N 301197506. All units must be delivered under FOB Origin terms, meaning the buyer assumes responsibility for transportation and related costs once the goods leave the supplier’s location. A strict five-day delivery timeline is mandated from the date of order issuance, requiring rapid production and logistics coordination to meet operational readiness demands. The contract is structured as a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, and applies to performance at Virginia Beach, 23459. The solicitation, identified by the RFQ number SPE8E826T4762, was posted on July 20, 2026, with responses due by July 31, 2026, and falls under the NAICS code 336612, classifying it within the manufacturing of other transportation equipment.

Defense Logistics Agency

POSTED

DEADLINE

Outboard Propelling Unit Supply and DeliveryThe contract entails the supply and delivery of two defense-specific outboard propelling units with NSN 2010016252918, requiring full compliance with established technical, packaging, and labeling standards mandated for military applications. These units are critical components for defense systems and must meet stringent performance and durability criteria to ensure operational readiness. The solicitation is classified as a subcontract under NAICS code 336612, indicating the focus on ship and boat building and repairing, and is managed by the FLUID HANDLING DIVISION under the Department of Defense. Proposals must be submitted by the response deadline of July 31, 2026, with all deliveries designated for performance at Tracy, California, ZIP 95304-5000. The contract posting date is July 20, 2026, affording potential vendors approximately eleven days to prepare and submit their bids through the designated DIBBS portal.

FLUID HANDLING DIVISION

POSTED

DEADLINE

DOOR, METAL, MARINE SThe contract covers the procurement of three metal marine structural doors identified by NSN 2040-01-563-0206 and part number 804-5959320, manufactured in accordance with Technical Data Package Revision A dated April 11, 2005, and referenced to Drawing 53711-4629248 Revision B dated October 10, 2023. The items must comply with all applicable DLA technical and quality requirements as defined in the DLA Master List, including restrictions on mercury and ozone-depleting chemicals, prohibiting intentional use of mercury in any hardware except for specific functional applications such as batteries, fluorescent lamps, sensors, and weapon systems, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. All packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging guidelines and special marking code 00-00 indicating no unique marking requirements. Delivery is required FOB origin within 168 days from the contract award, with a firm delivery date of January 5, 2027, and an original required delivery date of February 24, 2027. The quantity is fixed at three units with zero variance allowed. Inspection and acceptance occur at the destination point, specifically the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The unit of issue is each, priced at $3.00 per unit, totaling $9.00. The contract is subject to full and open competition under the solicitation number SPE7M4-26-T-247X, issued by the Department of Defense’s Fluid Handling Division, with Rory O’Reilly as the primary point of contact. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20, and all supplies must comply with applicable defense information protection standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

PROPELLING UNIT, OUTBOAThis contract specifies the procurement of two Yamaha Motor Corporation outboard propelling units, model P/N F250XCA, with NSN 2010-01-625-2918, under solicitation SPE7M4-26-T-271R. The units must comply with all technical and quality requirements cited in the DLA Master List of Technical and Quality Requirements, which supersede other standards unless otherwise specified. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the product or its contact surfaces, with limited exceptions for functional components like batteries, instruments, and weapon systems approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly forbidden without explicit written approval from the Contracting Officer, although this prohibition does not extend to commercial items as defined by FAR 11.001 or part-numbered-only items. Delivery is required within 157 days of award, with FOB origin terms, and inspection and acceptance will occur at the destination warehouse in Tracy, California. The units must be packaged in strict compliance with ASTM D3951, with DLA Master List requirements taking precedence, and labeled and palletized according to MIL-STD-129 and RP001 packaging guidelines. Each unit must be uniquely marked with the correct Unit of Issue and Quantity per Unit Pack as specified. The delivery is scheduled for January 5, 2027, with an original required date of April 13, 2027, and a zero variance is mandated for quantity—no more and no less than two units. Transportation logistics and shipping instructions follow DLAD Proc Notes C19 and C20, and the contract includes a designated point of contact, Rory O'Reilly, for inquiries. All documentation and compliance must align with the Federal Acquisition Regulation and Department of Defense standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Request for Information (RFI): Special Mission Vessel (SMV) – Helicopter, Unmanned Aerial System (UAS), Unmanned Surface Vehicle (USV) & Small Craft Support VesselThe U.S. Navy, through PMS 300, is issuing a Request for Information to identify industry capabilities for a Special Mission Vessel designed to support maritime security operations, with a focus on unmanned systems, small boat interdiction, and partner nation integration. The vessel must be approximately 300 to 400 feet in length, with a steel monohull or catamaran hull form, and comply with multiple international regulatory standards including 46 CFR, ABS classifications, SOLAS, MARPOL, and Panama Canal requirements. It must sustain operations for at least 30 days without resupply, achieve a 9,600-nautical-mile range at 10 knots, and operate safely in Sea State 5 conditions while performing boat launches and recoveries in Sea State 4. The vessel must feature a flight deck certified for SH-60, MH-60, MH-65, and Class 2/3 UAS operations, include dedicated 20x20 ft UAS storage, two TEU container sockets for control systems, and a non-crane-based system for launching and recovering vessels up to 44 feet and 35,000 pounds. It must support weapons systems, including .50 cal mounts, an armory, and an ammunition magazine, while providing accommodations for up to 59 personnel, including civilian mariners and embarked crews, with secure detainee space for 10 to 12 individuals. The vessel must have robust fueling capabilities for diesel, MOGAS, and AVGAS, with designated refueling status compliant with USCG standards, and include integrated towing and mooring systems for interoperability with U.S. and partner nation vessels. Required spaces include a 750 sq ft SCIF and 200 sq ft radio room with SIPR/NIPR communications, modular compartments for rapid reconfiguration, and reserved space, weight, and power for future government-furnished equipment like SATCOM, EO/IR, and radar systems. Respondents must detail their proposed acquisition method—whether new construction or modification of an existing vessel—and provide timelines, shipyard capacity, class society certification status, engineering timelines for conversions, and cost estimates with a ±10% confidence range. Data rights ownership and any restrictions under DFARS 252.227-7015 must be disclosed. Submissions, due by August 19, 2026, must be

POSTED

DEADLINE

20--PROPELLING UNIT,OUTBOAThe U.S. Department of Defense through DLA Land and Maritime is seeking quotes for two propelling units, outboard, identified by NSN 2010016252918, to be delivered to W1A8 DLA Dist San Joaquin within 157 days of award. The only approved source for this item is 4V176 F250XCA, and the solicitation is issued as an RFQ with no hard copies available; all submissions must be made electronically. Specifications, plans, or drawings are not provided, and responsible sources are invited to respond as long as quotes are submitted by the deadline. The solicitation number is SPE7M426T271R, posted on July 20, 2026, with responses due by July 31, 2026, under NAICS code 336612 for other aircraft parts and equipment manufacturing. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or DIBBS solicitation search portal.

DLA Land And Maritime

POSTED

DEADLINE

CASTING, SLEEVEThe contract titled CASTING, SLEEVE is a small business set-aside solicitation under the SBA Total Small Business Set-Aside program as defined by FAR 19.5, with a NAICS code of 336612 indicating it pertains to other transportation equipment manufacturing. It was posted on July 20, 2026, with a firm response deadline of July 23, 2026, at 10:00 PM ET. The solicitation is managed by DLA Maritime - Pearl Harbor, an office within the Department of Defense, and the primary point of contact is Amanda Ragsdale, reachable via email at AMANDA.N.RAGSDALE.CIV@US.NAVY.MIL or by phone at 808-285-0182. The office is located at Pearl Harbor, Hawaii, with a ZIP code of 96860-5033. The place of performance is unspecified in the provided details, and the full solicitation documentation must be referenced for technical specifications, delivery terms, and evaluation criteria. Interested parties must access the official SAM.gov workspace link to view the complete solicitation package and submit responses prior to the deadline.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

CONNECTOR,THRU-HULLThis contract pertains to the procurement of a specialized thru-hull connector assembly designated as SPECIAL EMPHASIS material (Level I), critical to the operation of a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly comply with drawing CPG 1025 and associated specifications including QQ-N-286 for material composition, with mandatory chemical and mechanical testing, non-destructive inspections, and full traceability from raw material to final assembly. Every component, including the body, nut, and washers, requires certified test reports that are permanently tied to traceability markings on the part and must be submitted electronically through WAWF prior to shipment. First Article Testing is mandatory and must be performed on a sample unit delivered to Portsmouth Naval Shipyard, with all welding, brazing, and heat treatment processes requiring prior approval and documented qualification data. Electronic signatures are accepted for certifications, but documentation must be positive, unqualified, and fully traceable, with no disclaimers permitted. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and adhere to stringent material control procedures to prevent commingling, ensure proper labeling, and verify all subcontracted operations. All shipments are subject to prior government acceptance through WAWF using designated DODAAC codes N50286 and N39040 and cannot be shipped without formal acceptance. The order is DO-rated under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, and subject to Buy American and Small Business Set-Aside provisions. Compliance with NAVSEA and Navy-specific technical standards governing welding, lubrication, thread inspection, and mercury-free manufacturing is mandatory, and any deviations require formal written approval. Final acceptance is contingent upon 100% inspection of certification documentation, traceability, and compliance with all specified test requirements, with zero defect tolerance for lot acceptance.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

RFP- FW076-260152- 6.05- 7.0m Aluminum RHIB T-top and trailerThe Department of Fisheries and Oceans is seeking to procure two 6.05m to 6.5m aluminum rigid hull inflatable boats with T-top center console designs and trailers, along with one 6.8m to 7m version of the same design and trailer, all for delivery to British Columbia. An option exists to purchase one additional unit of each size, providing flexibility for future needs. This procurement is conducted under the Government of Canada’s Supply Arrangement E60MC-190001 for aluminum RHIBs greater than six meters, and new suppliers must first qualify through the process outlined in RFSA E60MC-190001, accessible via the Government Electronic Tendering Service. No security is required for this requirement, and the government is not obligated to delay contract award pending the evaluation or issuance of a supply arrangement. The solicitation, numbered WS5769863979, was posted on July 14, 2026, with responses due by August 25, 2026, and is managed by the Contracting Authority Heureuse Saint-Juste of Public Services and Procurement Canada.

Department of Public Works and Government Services

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE