This Government Contract opportunity from Government of Canada was posted on May 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Navigation and Safety Systems Integration

Closed

Canada

Submission Closed06/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

G-IV Inertial Reference System UpgradeThe G-IV aircraft at Armstrong Flight Research Center requires an upgrade to its inertial reference system, which currently operates on the unsupported Honeywell LASEREF II unit. The original equipment manufacturer no longer provides support for this system or any alternative iterations except the LASEREF IV, which is the only compatible replacement approved for the G-IV platform. The acquisition includes three LASEREF IV units, the necessary adapter kit to transition from the legacy system, and full installation services to be carried out by an approved avionics shop to ensure compliance and operational integrity. This procurement is forecasted under the NAICS code 334511 and is managed by NASA’s National Aeronautics and Space Administration through the Armstrong Flight Research Center located at Edwards AFB. The action is intended to restore and maintain critical navigation capabilities, as the existing system is no longer serviceable due to discontinued support from the OEM and third parties. Point of contact for inquiries is Franzeska H. Becker, with additional support available through the Small Business Specialist, Curtis M. Paul. The solicitation is posted as a forecast with a projected timeline beginning October 1, 2026.

Armstrong Flight Research Center

POSTED

DEADLINE

Farseer: Quantum Sensing for ISRThe Department of Defense, through the Defense Innovation Unit, is launching the Farseer program to accelerate the transition of quantum sensing and timing technologies into operational Intelligence, Surveillance, and Reconnaissance capabilities. The program targets four key Lines of Effort: quantum magnetometers, gravimeters, portable atomic clocks, and critical component technologies that reduce Size, Weight, and Power while improving manufacturability. These advancements aim to overcome the fundamental sensitivity-SWaP trade-offs of classical systems, enabling warfighters to operate with greater precision, resilience, and situational awareness in contested, multi-domain environments. Quantum magnetometers must detect signals above 100 Hz with performance surpassing current benchmarks, gravimeters must function effectively in static, low-dynamics, and high-dynamics contexts meeting precise microgravity resolution metrics, and portable clocks must deliver ultra-stable timing outputs at 10 MHz, 100 MHz, and 1 PPS with compact form factors aligned to tactical platform constraints. Component technologies must support these systems through innovations in chip-scale lasers, photonic circuits, cryogenics, and vapor cells, while strengthening the domestic quantum supply chain. Vendors are invited to submit solution briefs tailored to one or more LoEs, with an emphasis on prototype readiness within three to nine months of award and a clear roadmap to achieve final performance goals within two to three years. Solutions must align with Sensor Open System Architecture principles, demonstrate dual-use commercial potential, and include evidence of prior testing or integration on defense or commercial platforms. Proposals must detail ruggedness levels, current and target Technology and Manufacturing Readiness Levels, proprietary software interfaces, and any foreign-sourced critical components or investor ties to adversarial nations. The program operates under the Other Transactions Authority, allowing for rapid award and follow-on production without competitive bidding. All submissions must be received by July 11, 2026, and are expected to feature unique innovations that outperform the state of the art, with modular, scalable designs capable of iterative insertion into evolving DoW systems.

Defense Innovation Unit

POSTED

DEADLINE

Amendment 1: Market Survey Announcement for Distance Measuring Equipment (DME) Ground Transponder SystemThe Department of Transportation’s 693KA8 System Operations Contracts office has issued a Market Survey Announcement for the Distance Measuring Equipment (DME) Ground Transponder System under solicitation number FAADMEMSA2026, with a response deadline of July 21, 2026, at 5:00 p.m. ET. This action is strictly informational and does not constitute a formal solicitation for proposals, bids, or binding agreements; no procurement strategy has been determined, and no evaluation factors or contract value are established. Respondents are requested to provide technical and commercial information, including their business size, location, status (such as small, large, or woman-owned), and annual production capacity for DME/N systems, which are solid-state ground station transponders designed for use in the National Airspace System to provide aircraft slant range distance and facility identification data. The technical baseline is defined by FAA-E-37016, dated June 24, 2025, which specifies performance, design, and test requirements for narrow-spectrum DME transponders operating with RF cable lengths up to 500 feet and maintaining performance after two years in non-operational storage. Compliance with international standards such as ICAO Annex 10 and multiple U.S. federal and industry specifications—including FAA-C-1217H, FAA-G-2100J, MIL-STD-461G, MIL-STD-810H, ASME Y14.44, and IEEE C95.1-2019—is mandated. Equipment must meet stringent environmental withstand requirements during shipping and storage, including survivability in temperature ranges from -46°C to +71°C. All hardware must ensure personnel safety by eliminating hazards from sharp edges and moving parts, and designs must comply with human factors and visibility requirements for labels, fuse ratings, and line-replaceable unit identification without disassembly. Responses must be submitted electronically to Michael Jones and Victor Jefferson by the deadline, formatted in Word or PDF with a minimum 12-point font, limited to 70 pages total, including a mandatory 25–50 page Requirements Verification Matrix and up to 20 pages addressing Section 8 requirements. The solicitation emphasizes protection of sensitive unclassified information under 5 U.S.C. § 552(b)(4) and applies Buy America and FAA Buy American Preference requirements. Questions must be submitted

693KA8 System Operations Contracts

POSTED

DEADLINE

QBC-X1 Programming Unit/Charger SupplyThe contract awards the supply of three QBC-X1 Programming Unit/Chargers along with bracket kits designed for configuring and charging Scannar sensors, intended for use in operational environments requiring precise sensor calibration and maintenance. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 334511 indicating classification within navigational, measuring, electromedical, and control instruments manufacturing. Performance of the work is required to be conducted at Woods Hole, Massachusetts, with a ZIP code of 02543, and all deliverables must be completed by the deadline of July 11, 2026, at 5:00 PM. The contract was posted on June 26, 2026, under the auspices of the Department of Commerce, specifically NOAA, and is managed through the SAM.gov platform. While no point of contact is listed, interested vendors must ensure full compliance with small business certification requirements and deliver the specified equipment in working condition, properly integrated with the bracket kits for secure mounting and operational readiness. All components must meet the technical specifications necessary for seamless compatibility with existing Scannar sensor systems used by NOAA, ensuring uninterrupted data collection and sensor functionality in field deployments.

Department Of Commerce Noaa

POSTED

DEADLINE

CONTROL,SERVO,AUTOMThe contract titled CONTROL, SERVO, AUTOM under solicitation number SPRPA126QRC30 is issued by the Department of Defense through the DLA Aviation office in Philadelphia, using Emergency Acquisition Flexibilities authority, which allows for expedited procurement processes. It requires suppliers to meet strict source approval standards, mandating that only government-approved sources submit proposals, with distributors required to provide authorized distributor letters on official letterhead at the time of submission. The contract enforces multiple regulatory clauses including compliance with ISO 9000 or equivalent quality systems, warranty coverage of one year from delivery with a 45-day window for defect discovery, and adherence to Buy American and Free Trade Agreements requirements, along with specific certifications and certificates tied to national production and trade policies. Additional requirements include mandatory use of Workflow Pro Assist Module, compliance with security prohibitions, and application of priority ratings for national defense and energy programs. The solicitation response deadline is July 13, 2026, with proposals submitted through the WAWF payment system and receiving report integration, and all invoices must align with the designated SPRPA1 routing. The North American Industry Classification System code is 334511, indicating a focus on navigational, measuring, electromedical, and control instruments manufacturing. The contract emphasizes equal opportunity for veterans and workers with disabilities under federal Deviation 2026-O0040, and includes a provision for annual representations and certifications under Deviation 2026-O0043. No drawings are available for reference, and all deliveries must adhere to specified FMS shipping instructions, with transportation by sea permitted under applicable terms. The primary point of contact is Nicholas Smarro at DLA, reachable via email and phone, and all submissions must be made in accordance with the technical and procedural requirements outlined to ensure eligibility for award.

Pa DLA Aviation At Philadelphia

POSTED

1 day ago

DEADLINE

in 16 days

AI Contract Overview

The contract involves the supply and installation of critical navigation and safety equipment, including navigation instruments, a Bimini cover, and navigation lights that comply with COLREGS regulations, as well as collision avoidance systems. This work is intended to enhance the safety and operational capabilities of vessels by ensuring they meet international navigation standards and improve collision prevention measures. The procurement falls under the subcontract category with the NAICS code 334511, which relates to navigating and guidance instruments manufacturing. The contract is issued by the Royal Canadian Mounted Police, a government agency of Canada, with the place of performance designated as the National Capital Region. The solicitation was posted on May 11, 2026, and interested parties must respond by June 10, 2026. While specific details such as the solicitation number and set-aside type are not provided, the contract focuses on integrating advanced navigation and safety systems to support law enforcement maritime operations in Canada.

General Info

Supply and install navigation equipment, Bimini cover, and collision avoidance systems for RCMP vessels.

Agency

Government of Canada → Royal Canadian Mounted PoliceView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing View NAICS

Place of Performance

National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 11

subcontract

Response DeadlineJun 10

Deadline has passed

Submission Closed

06/10/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Royal Canadian Mounted Police

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Royal Canadian Mounted Police

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and installation of navigation instruments, Bimini cover, and COLREGS-compliant navigation lights and collision avoidance systems.