This Government Contract opportunity from Department Of Defense was posted on October 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NDT and Chemical/Mechanical Analysis for Critical Safety Items

Closed

Federal

Submission Closed11/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors under the DLA Weapons Support Aviation Supply Chain. The primary objective is to execute contractor testing in accordance with procurement note E03 to ensure that aviation-grade shear bolts comply with all required technical and material standards. The scope of work involves utilizing specialized laboratory equipment for material verification and culminates in the delivery of a formal Production Lot Test approval and certification report. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in Cherry Point. Interested parties should note the solicitation timeline, which includes a posted date of November 4, 2026, and a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing specialized verification testing for prime contractors on Navy aviation and ship projects. The scope of work includes conducting First Article Testing for process validation, Production Lot Testing for batch sampling, and Product Verification Testing as requested by the Contracting Officer. All operations must utilize NDI tools and stress-testing rigs that comply with DoD safety standards to deliver certified test reports and pass results. The opportunity is categorized under NAICS code 541380 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of December 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

ID 6592875 - DAERA - LMC - The provision of certification services to the Northern Ireland Beef and Lamb Farm Quality Assurance Scheme (NIBLFQAS)

Solicitation # ID 6592875

The Livestock and Meat Commission for Northern Ireland is seeking a provider for certification services for the Northern Ireland Beef and Lamb Farm Quality Assurance Scheme (NIBLFQAS). This scheme is essential for maintaining animal welfare, food safety, and environmental standards, which in turn supports market access for approximately 11,422 active participants. The scope of work includes the development and implementation of methodologies for farm assessment, certification, registration, and data collection and recording. The contract is particularly suitable for small and medium-sized enterprises. The estimated total value of the contract is 13,012,125.60 GBP including VAT. The initial term is for three years, starting on 1 April 2027 and ending on 31 March 2030, with options for two additional 12-month extensions through 31 March 2032. Award decisions will be based on a weighted combination of 70 percent qualitative criteria and 30 percent quantitative criteria. Tenders must be submitted electronically by 8 December 2026, with an enquiry deadline of 1 December 2026.

The Livestock and Meat Commission for Northern Ireland

POSTED

DEADLINE

Radiation Monitoring and Reporting Services

POSTED

DEADLINE

Solicitation # 66000-2627-271

The County of San Mateo, through the San Mateo Medical Center (SMMC), is soliciting proposals under RFP 66000-2627-271 for occupational radiation dosimetry services. The objective is to support the hospital's radiation safety program by providing dosimetry equipment, including whole-body and fetal dosimeters, as well as monitoring, reporting, and record retention services for healthcare personnel exposed to ionizing radiation. The selected provider must comply with Federal and California State regulations, specifically those established by the California Department of Public Health, Radiologic Health Branch. The contract is intended for a five-year term, and the award will be based on a best-value solicitation process where the County may accept offers other than the lowest price. Proposers must demonstrate at least five years of experience in the manufacturing, sales, or leasing of similar products and services. Mandatory requirements include registration with SAM.gov, legal authorization to do business in California, and compliance with the San Mateo County Living Wage Ordinance, HIPAA, and Section 504 of the Rehabilitation Act of 1973. Preferential scoring is available for Local, Small, and Micro businesses or non-profits, ranging from 5% to 10% of total awardable points. Proposals must be submitted electronically via the County's eProcurement portal by November 25, 2026, and must include a technical proposal and a separate fee proposal.

POSTED

DEADLINE

Infrastructure Inspection and Watertightness TestingThis subcontract for the City of Richmond Hill involves providing physical inspections and watertightness testing for wastewater infrastructure projects. The selected contractor will support prime contractors by assessing the condition of manhole frames, covers, pump station wet wells, valve vaults, and impellers. These evaluations must be conducted using specialized vacuum testing equipment and inspection cameras, with all work performed by certified inspectors specializing in wastewater and concrete. The primary deliverables for this engagement include detailed condition assessment reports and formal watertightness test results. Interested parties should note that the response deadline is December 3, 2026, and the project falls under NAICS code 541380.

City of Richmond Hill

POSTED

DEADLINE

Field Performance Testing and CertificationThe Palos Verdes Peninsula Unified School District is seeking a subcontractor for Field Performance Testing and Certification for intermediate school projects located in Palos Verdes Estates. The selected provider will perform independent safety testing for prime contractors, specifically focusing on G-Max rating and shock attenuation testing. All work must be conducted using certified G-Max testing equipment in accordance with ASTM F1936 standards to verify the impact attenuation of finished synthetic surfaces. The contractor is responsible for delivering certified test reports and all necessary compliance documentation directly to the District. This opportunity is categorized under NAICS code 541380, with a response deadline set for November 18, 2026.

Palos Verdes Peninsula Unified School District

POSTED

DEADLINE

SFCC Functional Testing and Certification ServicesThe SFCC Functional Testing and Certification Services subcontract involves providing comprehensive inspection and performance testing for prime contractors on U.S. Navy SFCC projects. The scope of work requires the verification of form, fit, and function for Circuit Card Assemblies to ensure they meet strict system performance specifications. Additionally, the contractor is responsible for conducting traceability audits and producing precise material certification documents in accordance with SFCC protocols and DoDI 5230.24. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, this engagement focuses on the delivery of signed certification reports and detailed inspection results for 16 specific units. The project falls under NAICS code 541380, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Quality Assurance, Inspection, and Testing for F100 ComponentsThis subcontract involves providing quality assurance, inspection, and testing services for F100 components to support prime contractors delivering DLA supply contracts for the Department of Defense. The selected provider will perform independent dimensional inspections, material testing, and final quality assurance in strict accordance with the Engineering Data List and Qualification Requirements. Technical execution requires the use of non-destructive testing equipment and Coordinate Measuring Machines to ensure all certified components and inspection reports meet rigorous standards. To be eligible for this engagement, the contractor must maintain AS9100 certification. The project is categorized under NAICS code 541380 and is managed by the DLA Aviation office in Oklahoma City. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Critical Safety Item (CSI) Testing and Certification ServicesThis subcontract for Critical Safety Item Testing and Certification Services supports the DLA Weapons Support Maritime Supply Chain by providing specialized testing, inspection, and validation for prime contractors. The scope of work includes conducting First Article Testing, source inspections, and ensuring precise marking and labeling in accordance with MIL-STD-129 and MIL-STD-130N(1) standards. These tasks are performed using high-precision metrology equipment and CMM to deliver certified inspection certificates and test reports. To qualify for this engagement, providers must maintain CMMC Level 2 compliance and hold either ISO 9001 or AS9100 certification. The opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 18, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 14 days

AI Contract Overview

This subcontract involves providing independent verification, non-destructive testing, and chemical and mechanical analysis for critical safety items supporting Navsup Weapon Systems Support Mech projects. The scope of work includes performing quantitative chemical analysis, mechanical property testing, and non-destructive testing on production welds, as well as conducting assembly testing in accordance with Test Specification TS-208. The selected provider is responsible for delivering certified test reports and Contract Data Requirements Lists. To ensure technical compliance and quality standards, the contractor must maintain ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties must submit their responses by the deadline of November 2, 2026.

General Info

DoD subcontract for safety item testing and analysis requiring ISO/IEC 17025 certification.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFC38.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COUPLING ASSY, 1/4 — 4730LLH895959 — N0010426QFC38

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 15

subcontract

Response DeadlineNov 2

Deadline has passed

Submission Closed

11/02/2026, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Performs independent verification, non-destructive testing (NDT), and chemical/mechanical analysis for prime contractors on Navsup Weapon Systems Support Mech projects. Conducts quantitative chemical analysis, mechanical property testing, and NDT on production welds. Performs assembly testing per Test Specification TS-208. Requires ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. Delivers certified test reports and CDRLs.