Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

NDT and Quality Assurance Testing for Valve Stem Guides

Active

Federal

Response Deadline12/03/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing non-destructive testing and quality assurance services for valve stem guides to support Navsup Weapon Systems Support Mechanicsburg projects. The scope of work includes performing NDT for weld repairs and conducting precision measurements to ensure drawing compliance in accordance with ISO-10012 standards. Additionally, the contractor will support First Article Testing by providing detailed inspection reports on pre-production models. To qualify for this engagement, technicians must hold ASNT Level II or III certifications. The primary deliverables consist of comprehensive inspection and FAT validation reports. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense, with a response deadline set for December 3, 2026.

General Info

NDT and quality assurance services for valve stem guides due December 3, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QNE38.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

48--GUIDE,VALVE STEM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineDec 3

Submission deadline

Response Deadline

12/03/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing (NDT) and quality inspections for prime contractors on Navsup Weapon Systems Support Mechanicsburg projects. Conducts NDT for weld repairs and precision measurements for drawing compliance using ISO-10012 standards. Supports First Article Testing (FAT) via inspection reports on pre-production models. Requires ASNT Level II or III certified technicians. Delivers inspection and FAT validation reports.

Similar Contracts

Same NAICS industry code

Seismic Data ProcessingThis subcontract for Oil and Gas Development Company Limited (OGDCL) involves the processing of raw field data into interpretable 2D seismic images to support exploration projects in Pakistan. The scope of work requires the application of geophysical algorithms for noise attenuation, signal enhancement, velocity analysis, migration, and stacking. To successfully execute these tasks, the contractor must utilize specialized seismic processing software and high-performance computing clusters, ultimately delivering processed 2D seismic sections and detailed processing reports. The opportunity was posted on October 26, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 541380, this project is designed for prime contractors working with OGDCL to enhance subsurface imaging and data interpretation for oil and gas exploration.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 5 hours ago

DEADLINE

2D Seismic Field AcquisitionThis subcontract involves the physical acquisition of 2D seismic data to support exploration projects for the Oil & Gas Development Company Limited in Pakistan. The selected provider will be responsible for deploying geophones and sensors, operating explosive sources or Vibroseis trucks, and managing the field recording and quality control of raw seismic data. To successfully execute these tasks, the contractor must utilize specialized equipment, including seismic recording trucks, Vibroseis trucks, and GPS surveying tools. The final deliverables for this engagement consist of digital files, raw seismic field tapes, and detailed field reports. Interested parties must submit their responses by November 11, 2026, in accordance with the solicitation posted on October 26, 2026. This project falls under NAICS code 541380 and is designed to support prime contractors operating within the OGDCL framework.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 5 hours ago

DEADLINE

Precision Testing and Inspection Services (Housing Valve, Elec)This subcontract for Precision Testing and Inspection Services involves performing final testing and inspection of overhauled electronic housing valves for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will be responsible for conducting performance tests and final inspections utilizing special test equipment and calibration-certified tools in strict accordance with approved maintenance procedures. To ensure quality and compliance, the contractor must maintain ISO 9001 or SAE AS9100 certification and adhere to ANSI/NCSL Z540.3 calibration standards. Key deliverables for this engagement include the provision of certified test reports and detailed inspection records. The opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

TEAD - Helium Inspection Services

Solicitation # PANROC26P0000036026

Solicitation PANROC26P0000036026 is a 100% Small Business Set Aside for certified Non-Destructive Testing (NDT) services to perform helium leak inspections on newly fabricated one-metric ton mercury containers. The work is part of the Strategic Mercury Ton Container Assembly and Testing project and will be performed on-site at Building 519 of the Tooele Army Depot in Tooele, Utah. Per Amendment 0001, the requirement consists of 100 standard inspections and a variable retesting CLIN for 10 units. The period of performance is one year, specifically requested from January 1, 2027, to December 31, 2027. This is a Firm Fixed Price commercial order to be awarded to the responsible quoter submitting the lowest total evaluated price conforming to specifications. Technical and past performance factors will not be evaluated. Quotes are due by October 28, 2026, and must include a completed Pricing Matrix. The contractor is responsible for providing all personnel, equipment, and travel, and must ensure all containers are certified as structurally sound and airtight. Payment will be processed electronically via the Wide Area WorkFlow system.

POSTED

about 6 hours ago

DEADLINE

Water Quality Testing and TreatmentThis subcontract for Water Quality Testing and Treatment supports prime contractors on Oil and Gas Development Company Limited projects located at the Bettani Field in Pakistan. The scope of work involves sampling water at both source and delivery points to conduct comprehensive chemical and biological analyses using specialized laboratory equipment and testing kits. Additionally, the contractor is responsible for implementing necessary treatment processes, such as filtration and chlorination, to ensure water meets required standards. The selected provider must strictly adhere to established EHS standards and maintain all necessary water quality certifications. Key deliverables include the provision of treated water and the submission of detailed water quality analysis reports. Interested parties must respond by November 12, 2026, in accordance with the solicitation guidelines provided by OGDCL.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 10 hours ago

DEADLINE

Manual Stacker Inspection and CertificationThis subcontract agreement with Pakistan Refinery Limited involves the safety and functional inspection of manual material handling equipment at the PRL Keamari Terminal. The selected provider will perform visual inspections, functional tests, and load tests on manual stackers, ensuring all processes strictly adhere to BS ISO 5766:1990 standards. To qualify, the contractor must be an accredited inspection and certification body capable of delivering hard-copy certificates and durable metallic identification tags for the equipment. The project is categorized under NAICS code 541380 and is based in Pakistan. Interested parties must submit their responses by November 2, 2026, at 10:30 AM. This engagement focuses on maintaining operational safety for prime contractors through rigorous certification and verification of material handling machinery.

Pakistan Refinery Limited

POSTED

about 11 hours ago

DEADLINE

Specialized Rescue and Lifting Gear CertificationThis subcontract, issued by Pakistan Refinery Limited, involves the technical inspection and load testing of specialized rescue lifting devices and ladders for prime contractors at the PRL Korangi Refinery and Keamari Terminal projects. The scope of work includes the certification of CMC Rescue Litter Buckets, Rescue Lifting Tripods, extension ladders, and manual worm-gear winches. All inspections must adhere to strict industry standards, specifically EN 1496, NFPA 1931, EN 1496:2017 Class A, and NFPA 2500. The selected provider must be an accredited recognized inspection body capable of delivering hard-copy certificates and metallic ID tags for all equipment. Interested parties must respond by November 2, 2026, to fulfill these safety and compliance requirements within Pakistan.

Pakistan Refinery Limited

POSTED

about 11 hours ago

DEADLINE

Fall Protection and PPE Certification ServicesPakistan Refinery Limited is seeking a subcontract for Fall Protection and PPE Certification Services to support prime contractors at the PRL Korangi Refinery and Keamari Terminal projects in Pakistan. The selected provider must be an accredited inspection body responsible for performing visual inspections, functional tests, and load tests on 150 safety full body harnesses and lanyards, as well as 8 pieces of fall arrest equipment. All certifications must adhere to BS EN 361 and BS EN 363:2018 standards. The contractor is required to provide hard-copy certificates and metallic ID tags for all inspected equipment. Interested parties must submit their responses by November 2, 2026, at 10:30 AM. This opportunity falls under NAICS code 541380 and is managed through the Pakistan Refinery Limited procurement system.

Pakistan Refinery Limited

POSTED

about 11 hours ago

DEADLINE

6000070446 Annual, Bi-annual Inspection of Safety Harnesses, Lanyard, Fall Arrest Equipment, CMC Litter Buckets, Extension Ladder and Manual Stacker

Solicitation # Doc342060733

Pakistan Refinery Limited is seeking a qualified third-party inspection company for a one-year contract to perform periodic safety equipment inspections at the Korangi Refinery and Keamari Terminal. The scope of work involves visual inspections, functional testing, and load testing of various assets, including full-body harnesses, lanyards, fall-arrest equipment, CMC litter buckets, rescue lifting devices, and extension ladders on a biannual basis, while manual stackers are to be inspected annually. The contractor must utilize competent personnel and adhere to specific international standards, such as BS EN 361, BS EN 363:2018, NFPA 1931, and BS ISO 5766:1990, among others. Key deliverables include the provision of durable metallic identification tags for every piece of equipment detailing the ID number, test status, and expiry date, as well as the submission of hard-copy inspection certificates within one week of completion. Any equipment failing inspection must be clearly marked and reported as unfit for use. To be eligible, the contractor must hold a valid license or accreditation from a recognized national or international body. Bids will be evaluated based on compliance with requirements, personnel accreditation, reputation for quality, execution strategy, and recent experience with similar works.

Pakistan Refinery Limited

POSTED

about 11 hours ago

DEADLINE

Fire System Commissioning and Certification AgentThis subcontract opportunity is for a Fire System Commissioning and Certification Agent to provide independent testing and certification services for prime contractors on projects managed by the Oil & Gas Development Company Limited in Pakistan. The selected agent will be responsible for conducting functional testing of sensors using heat and smoke generators, as well as verifying alarm notification coverage through the use of decibel meters. To qualify, the provider must be a certified fire safety engineer or a recognized third-party certification body. The primary deliverables for this engagement include detailed system test reports and a final certification of compliance. Interested parties must submit their responses by November 11, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

about 12 hours ago

DEADLINE

Quality Testing Laboratory – First Article Test (FAT)This subcontract involves providing Quality Testing Laboratory services to perform First Article Testing for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The primary objective is to validate manufacturing processes by verifying material properties and dimensions against Reference Drawing NR 81755 C2989, Revision H. All measurements must be conducted using CMM, calipers, and micrometers calibrated to national standards, and the performing entity must maintain ISO/IEC 17025 certification. The scope of work requires the delivery of a certified sample part and a formal First Article Test Report. Performance will take place at Hill AFB, and the project falls under NAICS code 541380. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) ExecutionThis subcontract, titled First Article Test Execution, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The primary objective is to perform First Article Testing for prime contractors to verify that NSN 6605-01-607-1996 complies with Section C quality standards. The scope of work involves conducting technical testing on the first unit using laboratory equipment or specialized testing rigs, documenting all findings, and delivering a certified first article unit along with a formal FAT Report. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the posted date of October 25, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Specialized Electronic Component SupplyThis subcontract, titled Specialized Electronic Component Supply, involves the procurement of high-reliability electronic components, including capacitors, resistors, and integrated circuits, to support Department of the Navy repair projects. The selected provider must source and deliver mil-spec parts that adhere to DODISS specifications and provide certifications of conformance to mitigate the risk of counterfeit components. To ensure quality and safety, the contractor is required to maintain ISO 9001 or AS9100 quality management certifications and utilize anti-static packaging for all deliveries. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for November 9, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Circuit Card Assembly (CCA) Repair ServicesThis subcontract for Circuit Card Assembly Repair Services involves the teardown, evaluation, and repair of specific circuit card assemblies for prime contractors supporting Department of the Navy projects. The scope of work includes disassembling assemblies to identify failed circuitry, performing board-level repairs and component replacements, and conducting functional testing in accordance with DODISS standards. To ensure quality and compliance, the contractor must utilize precision diagnostic equipment and ESD-safe soldering stations to deliver fully repaired and functionally tested assemblies. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, this opportunity falls under NAICS code 811212. The solicitation was posted on October 26, 2026, with a response deadline of November 9, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

Fluid Valve Component SupplyThis subcontract, titled Fluid Valve Component Supply, involves the procurement of high-precision replacement seals, gaskets, and sub-components for Fluid Valve Stems under NSN 4820-01-317-3612. Managed by the Navsup Weapon Systems Support Mech within the Department of Defense, the contract supports prime contractors working on Department of the Navy projects. All supplied materials must meet original equipment manufacturer or government specifications and be delivered directly to the designated repair facility. Compliance is a critical requirement of this agreement, as the provider must furnish certification of origin in accordance with the Trade Agreements Act and the Buy American-Balance of Payments Program. The opportunity is categorized under NAICS code 332991, with a response deadline set for November 23, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

Fluid Valve Stem Repair and OverhaulThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the teardown, evaluation, and repair of Fluid Valve Stems (NSN 7HH 4820-01-317-3612) for prime contractors on Department of the Navy projects. The scope of work requires the execution of overhauls in strict accordance with technical manuals and directives, utilizing precision machining and electrostatic discharge protection protocols to ensure the delivery of functional, repaired stems with DLR labeling. Compliance is mandatory regarding physical marking standards per MIL-STD-130 and the application of unique item identifiers as specified in DFARS 252.211-7003. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 6 hours ago

DEADLINE

Supply of Certified Materials for CB Safety DeviceThis subcontract involves the supply of certified raw materials, including metals, plastics, and electrical components, for the CB Safety Device under the Navsup Weapon Systems Support Mech. All provided materials must strictly adhere to TDP Version 011 properties and be guaranteed free of mercury and hexavalent chromium. The supplier is responsible for delivering these materials to the manufacturer along with necessary certifications of conformance and material test reports. Managed by the Department of Defense under NAICS code 332710, the opportunity was posted on October 26, 2026, with a response deadline of November 23, 2026. The primary objective is to ensure that prime contractors receive high-quality, compliant raw materials that meet rigorous military specifications for weapon systems support.

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling for Naval Repair PartsThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing specialized packaging, marking, and labeling services for prime contractors. The scope of work requires strict adherence to military standards, including MIL-STD-2073 and MIL-STD-129 for packaging, and MIL-STD-767 or MIL-STD-2041 for cleanliness controls. A key technical requirement is the use of heat-sealed MIL-DTL-24466 green poly bags and the application of Depot Level Repairable labeling to ensure units are shipment-ready. The opportunity is categorized under NAICS code 561910 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 23, 2026. The final deliverable for this contract is the provision of finished, packaged, and labeled units that meet all specified naval repair parts requirements.

Packaging and Labeling Services

POSTED

about 6 hours ago

DEADLINE

Precision Manufacture of CB Safety Device Gen 2This subcontract involves the precision manufacture of CB Safety Device Gen 2 for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes the fabrication and assembly of devices in strict accordance with TDP Version 011 and IRPOD specifications. As part of the quality assurance process, the contractor must perform First Article Testing on five units designated for government destructive testing and provide the resulting FAT reports upon delivery. Strict material constraints are in place, requiring all components to be free of mercury and hexavalent chromium. Additionally, the contractor must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC and NIST SP 800-171 regulations. The project is categorized under NAICS code 335313, with a response deadline set for November 23, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

Battery Power Supply Repair and Modification ServicesThis subcontract involves providing specialized repair and modification services for Battery Power Supplies supporting NAVSUP Weapon Systems Support projects. The scope of work includes the complete teardown, diagnostic evaluation, and repair of units to original equipment manufacturer standards, as well as the preparation of Engineering Change Proposals in accordance with DI-SESS-80639E. The final deliverable is a fully functional Battery Power Supply, identified by NIIN 016010679, equipped with a Unique Item Identifier. Operating under NAICS code 334413 for the Department of Defense, the contractor must adhere to strict DFARS regulations regarding counterfeit part mitigation and cybersecurity standards. The procurement process is scheduled with a response deadline of November 23, 2026, ensuring that all technical and security requirements are met to support prime contractors on these critical naval power systems.

Semiconductor and Related Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

Marine Propeller Casting/Material SupplyThis subcontract, managed by the Department of Defense under Navsup Weapon Systems Support Mech, involves the supply of raw materials and base castings for ICU 1600 Class Propellers used in Naval Surface Warfare Center projects. The selected provider will be responsible for casting and forging marine-grade alloys according to precise technical drawing specifications to create raw blanks intended for the repair or replacement of naval propellers. The contractor must possess specialized foundry equipment capable of high-precision production and must strictly adhere to the Buy American Act regarding domestic sourcing. The final deliverable consists of raw or semi-finished propeller castings. Interested parties must respond by November 9, 2026.

All Other Rubber Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Marine Propeller Teardown, Evaluation, and RepairThis subcontract, issued by the Department of Defense under Navsup Weapon Systems Support Mech, involves the teardown, evaluation, and physical repair of a Left Hand ICU 1600 Class Propeller for prime contractors supporting Naval Surface Warfare Center projects. The scope of work includes disassembling the propeller to assess wear, performing specialized machining and welding to align with technical drawings, and conducting rigorous quality assurance testing. All work must be performed using precision machining tools suitable for marine alloys. The contractor is responsible for delivering a fully repaired, inspected, and tested propeller accompanied by a detailed report. Final packaging must adhere to MIL-STD-129 standards. This opportunity falls under NAICS code 332999, with a response deadline set for November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-STD-130 Physical Identification ServicesThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing physical marking and unique identification services for repaired assets. The selected contractor will be responsible for applying hardware markings in accordance with MIL-STD-130, REV N and implementing Item Unique Identification per DFARS 252.211-7003. These tasks will be executed using specialized labels or industrial laser engravers to ensure all assets are delivered with verified unique identifiers. The opportunity is categorized under NAICS code 339999 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

Telecommunications Replacement Parts SupplierThis subcontract opportunity with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, seeks a supplier for telecommunications replacement parts. The scope of work involves providing circuit boards, housings, internal parts, and other replacement components for prime contractors. All supplied items must be OEM or approved equivalents for NSN 5805-01-540-0342 and must strictly adhere to CAGE Code OKPC5 specifications. The selected supplier is required to ensure full compliance with the Buy American Act and must provide Certifications of Conformance for all delivered certified replacement parts. This procurement falls under NAICS code 423610, with a response deadline set for November 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS