This Government Contract opportunity from Department Of Defense was posted on October 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NDT Inspection for Special Emphasis Shipboard Hardware

Closed

Federal

Submission Closed10/30/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Accredited Environmental Laboratory ServicesThis subcontract for Accredited Environmental Laboratory Services supports prime contractors on environmental monitoring projects for the District of Ucluelet in Canada. The selected provider will be responsible for conducting analytical testing on water and sediment samples, specifically measuring Ammonia Nitrogen and Fecal Coliforms in water, as well as Redox Potential, Particle Size, and Total Organic Carbon in sediment. To qualify, the laboratory must hold ISO certifications or equivalent relevant accreditations to ensure the delivery of certified analytical reports. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on November 4, 2026.

POSTED

DEADLINE

Certified Hazardous Waste Analytical TestingThis subcontract for Certified Hazardous Waste Analytical Testing supports prime contractors on California Department of Transportation projects in Monterey. The selected provider will perform chemical analyses to identify, characterize, and profile waste materials collected from project sites. These services are essential for determining proper waste classification and ensuring materials are profiled correctly for acceptance at designated disposal facilities. To qualify for this engagement, the contractor must hold both Environmental Laboratory Accreditation Program and State Water Resources Control Board certifications. The primary deliverables for this contract include certified chemical analysis reports and detailed waste profiles. Interested parties should note the response deadline of November 17, 2026.

California Department of Transportation

POSTED

DEADLINE

Force Plate SKID Truck Calibration for the MNT team

Solicitation # 601440000054633

The Texas Department of Transportation (TxDOT) has issued Invitation for Bid (IFB) 601440000054633 for Force Plate SKID Truck Calibration to support the MNT team. This solicitation, a re-advertisement of a previous notice, seeks a vendor to provide specialized pavement testing and data collection equipment services, specifically focusing on pavement sensors for reading road conditions. The contract requires the vendor to perform work in accordance with specific work requirements and technical specifications, including the MNT PAV load cell pin layout. Award will be based on best value, with purchase price and compliance with technical specifications serving as the primary considerations. To be eligible, respondents must pass a documentation review and maintain a vendor performance rating of A, B, or C in the CPA Vendor Performance Tracking System. The submission process requires a multi-section response including a signed Execution of Response, a completed Bid Table with unit pricing, a Child Support Obligation Schedule, and detailed documentation demonstrating compliance with the Statement of Work. All responses must be submitted via the designated procurement portal by November 4, 2026. The resulting contract will mandate a one-year performance warranty against defects in workmanship and a minimum 12-month material warranty covering 100 percent of parts and labor. Additionally, the selected vendor must maintain specific insurance coverage, adhere to strict confidentiality and public disclosure restrictions, and may be required to submit a comprehensive quality assurance plan upon request. Performance will take place in Texas, with specific delivery instructions for Austin.

Texas Department of Transportation

POSTED

DEADLINE

Roofing and Waterproofing InspectionThis subcontract opportunity with OC Public Works involves providing specialized inspection services for roofing and waterproofing assemblies. The selected contractor will be responsible for inspecting roofing materials and installation, verifying waterproofing membranes, and utilizing technical tools such as moisture probes and infrared thermography. Key deliverables include the submission of detailed inspection reports and the formal certification of waterproofing. Qualified candidates must employ a certified roofing inspector to ensure all standards are met. The solicitation was posted on November 3, 2026, with a response deadline of December 23, 2026. This project falls under NAICS code 541380 and is intended for prime contractors operating on OC Public Works projects.

POSTED

DEADLINE

Pavement and Asphalt ServicesThis subcontract for Pavement and Asphalt Services involves providing specialized testing and inspection of asphalt and pavement materials for prime contractors working on OC Public Works projects in California. The scope of work includes conducting subgrade and aggregate-base testing, asphalt sampling, and pavement coring, as well as performing detailed condition surveys and forensic evaluations. The selected provider will utilize pavement coring machines and asphalt sampling tools to generate and deliver comprehensive pavement condition reports and core test results. The opportunity is categorized under NAICS code 541380 and was posted on November 3, 2026. Interested parties must submit their responses by the deadline of December 23, 2026. Further details regarding the solicitation can be accessed through the provided OpenGov procurement portal.

POSTED

DEADLINE

Structural Steel and Metals Testing and InspectionThis subcontract for Structural Steel and Metals Testing and Inspection involves providing specialized inspection and testing services for prime contractors on OC Public Works projects in California. The scope of work focuses on structural steel, reinforcing steel, welding, and bolting, including the verification of metal decks and the performance of visual and non-destructive testing for welds. The selected contractor is required to provide a Certified Welding Inspector and a Professional Engineer stamp for all final reports. Key deliverables include detailed inspection reports and formal certifications for welding and bolting. The solicitation was posted on November 3, 2026, with a response deadline of December 23, 2026.

POSTED

DEADLINE

Fireproofing and Firestopping InspectionThis subcontract opportunity with OC Public Works involves providing specialized inspections for fire-rated assemblies. The selected contractor will be responsible for verifying the installation and materials used in firestopping and inspecting fireproofing applications using thickness gauges. A primary deliverable of the contract is the submission of detailed fireproofing and firestopping inspection reports. Qualified candidates must hold an ICC Special Inspector certification specifically for fireproofing. This project falls under NAICS code 541380 and is intended for prime contractors working on OC Public Works projects. The response deadline for this opportunity is December 23, 2026.

POSTED

DEADLINE

Concrete and Masonry Testing and InspectionThis subcontract for Concrete and Masonry Testing and Inspection involves providing construction materials testing and special inspections for prime contractors on OC Public Works projects in California. The scope of work includes sampling and testing concrete, grout, and masonry, as well as verifying proper placement and curing to ensure full compliance with approved project plans. Technical requirements include the use of concrete cylinders and compression testing machines to validate material strength. A critical deliverable of this contract is the provision of signed and stamped test reports and inspection certifications, which must be authorized by a Professional Engineer. Interested parties should note that the response deadline for this opportunity is December 23, 2026.

POSTED

DEADLINE

Architect - Engineer (A-E) Construction Testing and Inspection Services- Task Order Contract

Solicitation # 080-3158004-DB

OC Public Works, on behalf of the County of Orange, is soliciting a Task Order Contract for Architect-Engineer (A-E) Construction Testing and Inspection Services under solicitation number 080-3158004-DB. This as-needed contract is designed to supplement existing resources for professional services including construction materials testing and special inspections for concrete, grout, masonry, and structural steel, as well as testing, adjusting, and balancing for various mechanical systems. The contract has a maximum term of three years, and while no minimum amount of work is guaranteed, the County may award the requirements to a single respondent or apportion them among multiple firms. Qualified respondents must submit a Statement of Qualifications not exceeding 25 pages and identify their expertise across fifteen specialty areas. The selection process is based on a scoring format and is subject to reference checks, past performance, and potential approval by the County Board of Supervisors. Awarded firms will be required to provide a valid Unique Entity Identifier and submit cost and fee schedules on a per-project basis. Performance requirements include adherence to the Architect-Engineer Guide (Rev July 2018), California prevailing wage rates, and the County's safety and loss prevention policies. Payment is issued net thirty days after the receipt of an acceptable invoice submitted in monthly arrears.

POSTED

DEADLINE

Construction Testing and Special InspectionsThis subcontract for Construction Testing and Special Inspections supports prime contractors on Clackamas County WRRF projects located in Oregon City. The scope of work involves performing IBC Section 1704 inspections, observing the installation and anchorage of hazardous material piping, and conducting material sampling. To ensure quality and accuracy, all equipment used must be traceable to NIST or ISO 17025 standards in accordance with ASTM E329 and ACI 318-19. The selected provider is responsible for delivering detailed inspection reports and certificates of compliance. This opportunity falls under NAICS code 541380 and was posted by Clackamas County in Oregon. Interested parties must submit their responses by the deadline of December 3, 2026.

POSTED

DEADLINE

Geotechnical Engineering and Soil TestingThis subcontract for Geotechnical Engineering and Soil Testing supports prime contractors on City of Hyattsville DPW projects. The scope of work involves performing soil analysis, site characterization, and infiltration testing specifically for the siting of rain gardens and bioretention systems. Additionally, the selected provider will conduct soil borings and offer geotechnical recommendations for various structural components using specialized drilling rigs and testing equipment. Qualified providers must employ a Professional Geologist or Professional Engineer to oversee the technical requirements and deliver comprehensive geotechnical reports and test results. The solicitation was posted on November 3, 2026, with a response deadline of December 4, 2026. This opportunity falls under NAICS code 541380 and is managed through the state of Maryland.

POSTED

about 20 hours ago

DEADLINE

in 30 days

AI Contract Overview

This subcontract involves providing non-destructive testing for safety-critical shipboard hardware on behalf of prime contractors for the Department of Defense, specifically the NAVSUP Weapon Systems Support Mechanicsburg. The scope of work includes performing Liquid Penetrant Inspection and Magnetic Particle Inspection using certified equipment and dyes, as well as developing NDT procedures for approval by the DCMA QAR. The project requires the use of ASNT certified technicians to ensure technical compliance and quality. Key deliverables include the submission of detailed NDT Inspection Reports and certifications of compliance. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 30, 2026.

General Info

NDT testing for DoD shipboard hardware using certified technicians by October 30, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFB74.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PARTS KIT,SEDIMENT — 4820015448901 — N0010426QFB74

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 16

subcontract

Response DeadlineOct 30

Deadline has passed

Submission Closed

10/30/2026, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Performs non-destructive testing for prime contractors on NAVSUP Weapon Systems Support Mechanicsburg safety-critical hardware projects. Conducts Liquid Penetrant Inspection (LPI) and Magnetic Particle Inspection (MPI) using certified dyes and magnetic benches. Develops NDT procedures for DCMA QAR approval. Requires ASNT certified technicians. Delivers NDT Inspection Reports and certifications of compliance.