Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

NITRILE GLOVES

Active
SPMYM226Q7821Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

315990 - Apparel Accessories and Other Apparel ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Documents

(1)

Solicitation+-+SPMYM226Q7821+NITRILE+GLOVES.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA

Full Description

Show more

FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL OR FAX. ENSURE YOU CHECK APPLICABLE BOXES IN CLAUSE 52.204-24 (2)(d) (1) and (2) AND THAT YOU HAVE COMPLETED ITEMS 1 THROUGH 10 NOTED BELOW.



THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)



**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**



  Please read the contract in its entirety.



  If you are able to provide a quote be sure to provide the following information in the sections provided below:



  1. Page 1 BLK 17a. Provide Contractor's info and cage code.
  2. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  3. Section A. A1 – 1. Enter The Contractor's POC
  4. Section B. – Enter your Quote and any other info we should know.
  5. Please quote FOB Destination
  6. Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name__________, Address_______ and the Country of Manufacturing________ and part number_________.
  7. Section F. –  Provide the Lead Time and/or Delivery Date.
  8. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes

  1. Section K.- 52.212-3(b)-(p) Check the applicable boxes

  1. Return the signed and filled out solicitation with your quote by the due date listed.


FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.



EMAIL: donna.todd@dla.mil


PHONE: 385-591-1057

Similar Contracts

Same NAICS industry code

NAICS: 315990
New
Federal
Next Generation Advanced Bomb Suit Contract ModificationThe U.S. Army Contracting Command – Detroit Arsenal intends to modify the sole-source, indefinite delivery, indefinite quantity contract W91CRB-23-D-0021 awarded to QinetiQ Incorporated for the Next Generation Advanced Bomb Suit (NGABS), a critical Acquisition Category IV program designed to replace the aging Advanced Bomb Suit. The NGABS provides EOD soldiers with comprehensive 360-degree ballistic and blast protection, integrating the Soldier Protection System including the IHPS Gen I helmet, MSV, and VTP hard armor plates, while significantly enhancing mobility, survivability, and mission tailoring for global operational environments. The system includes advanced technological features such as the Modular Sensor Suite and Heads-Up Display, which deliver fused day/night vision, infrared, and visible spectrum data directly to the soldier, dramatically improving situational awareness in low-visibility conditions. The current contract covers procurement, production, and delivery of the complete NGABS ensemble, including the bomb suit, soft armor, helmet cooling, integrated lighting, communications, computing systems, and software, all aligned with Purchase Description GL/PD 23-03. The proposed modification will restructure the contract’s line-item numbering to allow the NGABS Bomb Suit component to be procured separately from the MSS Electronics Kit containing the Heads-Up Display, enabling greater operational flexibility and logistical efficiency. This change supports tailored procurement based on immediate mission needs without requiring full system acquisition. The modification is being pursued under statutory authority for unavoidable delays in fulfilling urgent requirements, with award anticipated in August 2026. No formal solicitation is being issued; instead, the government is seeking voluntary capability submissions from interested parties by August 3, 2026, to assess whether competition would be in the government’s best interest. Responses must be submitted electronically to designated point of contacts, include proof of capability to deliver the required systems, and incur no cost or obligation to the government. Verbal submissions are not accepted, and the government retains full discretion to proceed without competition.
W6QK Acc-Apg

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
SNAP LINK, RAPPELLERThe contract is for the procurement of 10 units of SNAP LINK, RAPPELLER with NSN 8465-01-276-8198 under solicitation SPE1C1-26-T-1552, issued by the Department of Defense through C and T Supply Chain. The item, supplied by LIBERTY MOUNTAIN SPORTS LLC, must meet all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. The unit is identified as non-hazardous under FED-STD-313 and must be commercially packaged in strict compliance with MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements. Delivery is required within 20 days FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur upon arrival at the destination. The shipment is destined for MUWAFFAQ SALTI AIR BASE in Jordan, with a forwarded parcel post address to APO AE 09321, and transportation instructions follow DLAD PROC NOTE C19 and C20. The required delivery date is July 27, 2026, and the item must be packaged with a Unit of Issue of EA and a Quantity per Unit Pack of 1. All packaging and documentation must reflect the specified Contract Line Item Number, Purchase Request, and Government identifiers including DIC, DIST, and ADV codes. Access to the full technical specifications is mandated via the DLA website, and the contract is subject to covered defense information controls as noted under RD003. The point of contact for inquiries is Jennifer Scarpello at safetyprotection@dla.mil, and the solicitation response deadline is August 6, 2026.
C AND T SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 315990
New
DIBBS
DPAS-Rated Order Fulfillment SupportThe contract titled DPAS-Rated Order Fulfillment Support establishes an internal process and supply chain capability to ensure that orders rated under the Defense Priorities and Allocations System are given priority over commercial work, as required by Clause H18. This subcontract is issued under a Total Small Business Set-Aside, specifically targeting small businesses as defined by the SBA, with the NAICS code 315990 indicating a focus on other textile product mills. The Department of Defense, through its ASC Commodities Division, is seeking vendors capable of reliably integrating DPAS priority handling into daily operations to support national defense requirements without compromising commercial commitments. The solicitation is open for responses until August 3, 2026, with the posting date set for July 23, 2026. The place of performance and organizational details are not specified, but the requirement is tied directly to the vendor's ability to modify internal workflows, inventory allocation, and production scheduling to ensure DPAS-rated tasks are completed first. Compliance with this clause necessitates transparent tracking systems, employee training, and documented procedures to validate priority execution. This subcontract is critical to maintaining operational readiness within the defense logistics chain and demands proven experience in managing prioritized government contracts under strict regulatory frameworks.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
FACESHIELD, RIOT CONTROThe contract specifies the procurement of 110 units of Face Shield, Riot Control, part number DK5-X.250AF with NSN 8415-01-514-8856, issued under solicitation SPE1C1-26-T-1550 by the Department of Defense through C and T Supply Chain. The unit price is $110.00 per unit, totaling $12,100, with delivery required within 20 days to Fort Bragg, North Carolina, under FOB Destination terms. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing specifications over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is non-hazardous, commercial packaging per ASTM D3951 is acceptable only if not superseded by DLA requirements; if hazardous, Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001, and shipment must use traceable means, excluding parcel post. The cybersecurity requirement mandates a CMMC Level 2 self-assessment, and covered defense information protocols are active. The delivery must be completed by July 24, 2026, and shipping instructions direct delivery to Building Y5015, MMD Blvd, Fort Bragg, NC. All packaging and documentation must reflect the specified unit of issue, quantity per unit pack, and government tracking identifiers including the M/F code W58VRR62020001 and project code TP 3.
C AND T SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
PLUGThis contract, issued under solicitation number SPE8E6-26-T-3858 by the Defense Logistics Agency through Depot Oklahoma, calls for the procurement of 40 units of a plug item identified by NSN 4240-01-380-4949 and part number 7000029584 from 3M Company, used to seal facepiece ports to enable masks to operate in airline mode. The total contract value is $1,600 at a unit price of $40.000, with delivery required 55 days after award, no later than July 31, 2026, delivered FOB origin to Tinker Air Force Base, Oklahoma. The contract strictly mandates compliance with multiple military and federal standards: all packaging must adhere to MIL-STD-129 for marking and labeling, and individual items must be permanently marked per MIL-STD-130N for Unique Item Identification. Non-hazardous materials must be commercially packaged in accordance with ASTM D3951, but this is subordinate to the DLA Master List of Technical and Quality Requirements, which takes precedence; hazardous materials must be packaged under TQ Requirement IP025 as defined by FED-STD-313 and labeled per OSHA’s Hazard Communication Standard. Palletization is governed by RP001, DLA’s Packaging Requirements for Procurement. The inspection and acceptance occur at the destination, and all shipments must be tracked using WAWF for invoicing and receiving reports. The contract imposes stringent transportation requirements, including a prohibition on foreign-flag vessels unless a formal waiver is granted 45 days prior to shipment, supported by documented efforts to secure U.S.-flag alternatives. Contractors must submit Safety Data Sheets pre-award, fully compliant with 29 CFR 1910.1200, and disclose UEI and CAGE codes if providing covered defense telecommunications equipment. Compliance with numerous DFARS and FAR clauses is mandatory, including those related to combating trafficking, employment eligibility verification, sustainable products, whistleblower rights, information disclosure, and restrictions on compensation for former DoD officials. The contract includes deviations from standard clauses and requires offerors to affirm small business status, socioeconomic certifications, and adherence to all technical, packaging, and safety specifications as outlined in referenced standards and DLA directives, with failure to comply potentially resulting in disqualification or contract rejection.
DEPOT OKLAHOMA

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 334220
New
Federal
HANDHELD RADIOThis solicitation for handheld radios, numbered SPMYM226Q7823, is a total small business set-aside under NAICS code 334220, issued by the Department of Defense’s DLA Maritime – Puget Sound office in Bremerton, Washington. All responses must be submitted electronically via email to diana.baldwin@dla.mil by the deadline of July 28, 2026, at 8:00 PM ET, and only fully completed and signed solicitation forms will be considered responsive. Bidders are required to provide detailed contractor information, including CAGE code, point of contact, quote, and delivery terms, with all items to be delivered FOB destination in Silverdale, Washington. Lead times and delivery dates must be clearly stated, and the manufacturer’s details—name, address, and country of origin—must be declared per Section K. Compliance with the FAR 52.204-24 requirement regarding cybersecurity and information systems must be confirmed by checking the appropriate boxes. Contractors must ensure their proposals meet the NIST SP 800-171 security requirements unless the items being quoted are classified as Commercial Off-The-Shelf (COTS), in which case an exemption applies but must be explicitly identified and documented during bidding. Any COTS items must be clearly marked and justified to the contracting officer. The solicitation must be reviewed in its entirety, with specific attention to Box 28 and the certification requirements in Boxes 30a, 30b, and 30c on Page 1. All submissions must be complete, accurate, and submitted via email only; failure to comply with any submission requirement will render a bid non-responsive. The place of performance is specified as Silverdale, Washington, with the contracting officer contact information provided for questions and submission purposes.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332999
New
Federal
HANEL LEAN LIFT CABINET (SOLE SOURCE)This solicitation, designated SPMYM226Q7575, is a sole source procurement by DLA Maritime - Puget Sound for a Hanel Lean Lift Vertical Lift Module, model 2860-825/281/320/75/650/40, to be delivered and installed as a turn-key system at Naval Base Kitsap-Silverdale, Washington. The requirement includes not only the equipment itself but also full installation, connection to utilities, relocation of interfering electrical conduits and lighting, up to 100 feet of new conduit and wiring with an appropriate breaker, operational testing, and comprehensive personnel training. The contract further mandates the delivery of supplemental data packages including repair manuals, NRTL certification documentation, and warranty terms as defined in Exhibits A, B, and C, all subject to firm fixed pricing. Delivery is required by August 14, 2026, with FOB destination terms applying, and all shipments must comply with ASTM-D-3951 packaging standards, using heat-treated wood pallets where applicable, while strictly prohibiting materials such as asbestos, excelsior, and loose fill polystyrene. Marking of all containers must include the NSN or part number, noun nomenclature, quantity, contract number, and contractor information, with legibility ensured through any method. Proposals must be submitted electronically to Tricia Wintersteen at tricia.wintersteen@dla.mil and must include a completed and signed solicitation, manufacturer identification, country of origin, and precise lead time quoted FOB destination. Offers are evaluated as technically acceptable before price competitiveness is considered, with technical and past performance combined as approximately equal in weight to cost or price. The system must meet NFPA, NEMA, and ANSI standards, including NEMA-MG1 for motors and ASTM E-84-10m fire-retardant coating ratings. The contractor is responsible for all inspections and quality control, with final acceptance contingent upon satisfactory installation, testing, and government approval; non-conforming items may lead to rejection of the entire lot. A three-year warranty commencing at acceptance is required, and all warranty service must be performed by a factory-authorized distributor. Cybersecurity requirements mandate NIST SP 800-171 compliance and a current assessment unless the item is identified as COTS, in which case an exemption must be claimed and substantiated during bidding. Contractors must also comply with FAR and
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
Federal
SECURITY FENCINGThe solicitation SPMYM226Q7478 for SECURITY FENCING is a Total Small Business Set-Aside under FAR 19.5, issued using commercial and simplified acquisition procedures per FAR Parts 12 and 13.5, with a NAICS code of 332618. It requires the supply and installation of security fencing, gates, gate motors, and solar lights as two distinct line items—FENCING MATERIAL and LABOR FOR INSTALLATION—each with a quantity of one, to be delivered FOB Destination to the Naval Shipyard Puget Sound Detachment at NAS North Island in San Diego, California, on or before July 27, 2026. The resultant award will be a firm fixed-price contract, and offerors must complete all representations and certifications in SAM.gov, including a current Unique Entity Identifier and CAGE code, while affirming small business status. All submissions must reference the solicitation number in the subject line and be sent via email to Denise Quist at denise.quist@dla.mil by the deadline of July 13, 2026. A mandatory site visit is required on July 27, 2026, during two time slots: 0700–0900 and 1100–1300. Contractors must comply with stringent packaging and marking standards per ASTM-D-3951, prohibiting asbestos, excelsior, loose fill polystyrene, and shredded paper; non-manufactured wood must be heat treated to 56°C for 30 minutes and ALSC-certified, with pallets required except for small parcel shipments. Labeling must include NSN, FSN, or part number, noun nomenclature, quantity, contract number, and origin/destination details. Unique items must comply with MIL-STD-129 and MIL-STD-130 for machine-readable marking and UDI data elements. Inspection and acceptance occur at destination by the receiving activity, with any single nonconformance potentially leading to rejection of the entire shipment. Invoicing must be submitted electronically through WAWF with Transportation Control Numbers and carrier tracking, with invoices limited to once every two weeks. Contractors must adhere to NIST SP 800-171 for CUI protection, DFARS 252.204-7020, Executive Order 1355
Other Fabricated Wire Product Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
Federal
DNM 6700 4TH GENERATIONThe U.S. Department of Defense, through DLA Maritime - Puget Sound, is soliciting a sole-source, firm fixed-price supply contract for one DNM 6700 4th Generation 3-Axis Vertical Machining Center from Ellison Technologies under commercial item procedures outlined in FAR Parts 12 and 13.5. The item, classified under NAICS code 333248 and Product Service Code 3417, will be delivered FOB Destination to Puget Sound Naval Shipyard in Bremerton, Washington, with final acceptance performed by the Government at Building 514 D1. The contract requires full compliance with commercial packing standards ASTM-D-3951, military marking standards MIL-STD-129 and MIL-STD-130, including mandatory two-dimensional Data Matrix barcodes encoding Unique Item Identifiers in accordance with ISO/IEC 16022, ISO/IEC 15434, and ANSI MH10.8.2. Wood packaging must be heat-treated to 56°C for 30 minutes and certified by an ALSC-recognized agency, while prohibited materials include asbestos, excelsior, loose fill polystyrene, and hygroscopic substances. The equipment must be OSHA-certified by a nationally recognized testing laboratory, accompanied by three hard copies and one searchable electronic copy of comprehensive operating and maintenance manuals, and include on-site training by a U.S. citizen representative. All offerors must be registered in SAM.gov, provide a valid CAGE code, complete all representations and certifications, and indicate whether the item qualifies as Commercial Off-The-Shelf, which exempts it from NIST SP 800-171 cybersecurity requirements. The solicitation mandates adherence to clauses covering child labor, whistleblower rights, prohibited contractors, supply chain security, and anti-discrimination policies, with a requirement that offers include delivery lead times and pricing for each CLIN. Offers must be submitted via email to Naomi Larson at naomi.larson@dla.mil by 27 July 2026, with delivery scheduled for 30 September 2026. Invoicing must be processed through WAWF, and the payment office is located at the same DLA Maritime facility in Bremerton. The award will be based on a trade-off analysis of technical merit, price, and performance, without specifying the relative weight of non-price factors. No contract
All Other Industrial Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in about 3 hours
View Details