Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Non-Destructive Testing (NDT) Services for Stainless Steel Fabrication

Active

State & Local

Response Deadline12/01/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized non-destructive testing services for stainless steel fabrication as part of the Golden Gate Bridge seismic retrofit projects. The scope of work includes performing Magnetic Particle, Penetrant, and Ultrasonic testing on energy dissipation devices, as well as conducting redundant quality control inspections and verifying welding preparation and fit-up. The contractor is required to utilize an ASNT Certified Level III inspector for the preparation of the NDT plan and must deliver comprehensive test reports and non-conformance documentation. This opportunity is issued by the Golden Gate Bridge District under NAICS code 541380, with a response deadline set for December 1, 2026.

General Info

NDT services for Golden Gate Bridge seismic retrofit, due December 1, 2026.

Agency

California → Golden Gate Bridge District

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026-B-038.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOLDEN GATE SUSPENSION BRIDGE SEISMIC RETROFIT CONTRACT 1 NORTH AND SOUTH TOWERS AND NORTH AND SOUTH SIDE SPANS ENERGY DISSIPATION DEVICE INSPECTION SERVICES

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineDec 1

Submission deadline

Response Deadline

12/01/2026, 11:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Golden Gate Bridge District

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Golden Gate Bridge District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs non-destructive testing for prime contractors on Golden Gate Bridge seismic retrofit projects. Executes Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT) on stainless steel energy dissipation devices. Performs redundant testing of QC inspections and inspects welding preparation and fit-up. Requires ASNT Certified Level III inspector for NDT plan preparation. Delivers NDT test reports and non-conformance documentation.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialized Testing and Certification ServicesThis subcontract for Specialized Testing and Certification Services involves performing First Article Testing for prime contractors on DLA Troop Support projects. The primary objective is to validate hoisting beam specifications by executing tests under CLIN 0002, utilizing calibrated measurement equipment and load testing rigs to ensure dimensional accuracy, load capacity, and overall structural integrity. The selected provider is responsible for delivering an approved First Article along with a comprehensive FAT Certification Report and certification of compliance. This project is managed under the Department of Defense for Construction and Equipment Manufacturing and is to be performed in Tracy, California.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis Service-Disabled Veteran-Owned Small Business set-aside subcontract involves providing First Article Testing services for the Department of Defense at the DDSP New Cumberland Facility. The contractor is responsible for performing specialized testing on 14 initial units for prime contractors associated with DLA Troop Support Construction and Equipment projects. All work must be executed according to Reference QAP 14153 SQAP-FAT3 to validate manufacturing processes, and the contractor must be capable of handling export-controlled technical data. The primary deliverables for this engagement include 14 validated test units and a certified First Article Test Report. Interested parties must respond by November 9, 2026, for this project categorized under NAICS code 541380.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and Quality Validation for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The primary objective is to conduct validation on a single prototype unit to certify that manufacturing processes align with MIL-DTL specifications. The selected contractor will be responsible for coordinating with Quality Assurance Representatives and delivering both a validated test unit and a formal FAT Certification Report. The project is categorized under NAICS code 541380 and will be performed in Bremerton, Washington. Interested parties must respond by November 9, 2026, regarding the solicitation posted on October 28, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing (FAT) Services for Electrical WireThis subcontract involves providing First Article Testing services for electrical wire to support the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for verifying that first production units meet MIL-DTL-16878/3C(1) standards using military-grade electrical testing laboratory equipment. Key deliverables include the submission of FAT certifications, detailed test reports, and verified first article samples, all while coordinating closely with Quality Assurance Representatives for final inspection. The project is managed under NAICS code 541380 and will be performed at Fort Stewart, Georgia. Interested parties must note the response deadline of November 9, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Testing and Certification Services (MIL-STD-831)This subcontract for Testing and Certification Services involves performing First Article Testing for prime contractors supporting DLA supply contracts. The scope of work requires conducting performance and safety testing on two fire extinguisher units using specialized laboratory equipment to ensure compliance with established standards. The contractor is responsible for preparing and delivering a First Article Test Report in accordance with MIL-STD-831, which must be submitted to the DSCP Contracting Officer within 90 days of the award. This project is managed under the Department of Defense through DLA DIST San Joaquin and will be performed in Tracy, California.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from California → Golden Gate Bridge District

Same awarding agency

Stainless Steel Surface and Coating Inspection ServicesThis subcontract for Stainless Steel Surface and Coating Inspection Services supports seismic retrofit projects for the Golden Gate Bridge District in California. The selected provider will perform critical surface and coating testing for prime contractors, specifically focusing on the composition and profiles of abrasives and roughness testing for production stainless steel faying surfaces. Additionally, the scope includes the inspection of cleaning processes and the application of dielectric coatings. To qualify for this engagement, personnel must hold professional certification in coating inspection from NACE or SSPC. The contractor is responsible for delivering detailed material inspection reports and surface profile logs to ensure quality control. Interested parties must submit their responses by the deadline of December 1, 2026.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Stainless Steel Fabrication Shop Inspection & Quality AssuranceThe Stainless Steel Fabrication Shop Inspection and Quality Assurance subcontract supports seismic retrofit projects for the Golden Gate Bridge District. The selected provider will perform critical visual inspections and quality assurance for prime contractors, focusing on the review of welder qualifications, Welding Procedure Specifications, and Procedure Qualification Records. Key technical responsibilities include monitoring wear-in cyclic testing and stainless steel faying surface testing, as well as conducting shop assembly and construction inspections in accordance with established Special Provisions. To qualify for this engagement, personnel must hold Certified Welding Inspector credentials. The contractor is responsible for maintaining rigorous documentation, delivering both daily inspection reports and weekly fabrication reports to ensure project compliance. This opportunity is categorized under NAICS code 541330, with a response deadline set for December 1, 2026.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

GOLDEN GATE SUSPENSION BRIDGE SEISMIC RETROFIT CONTRACT 1 NORTH AND SOUTH TOWERS AND NORTH AND SOUTH SIDE SPANS ENERGY DISSIPATION DEVICE INSPECTION SERVICES

Solicitation # 2026-B-038

The Golden Gate Bridge, Highway and Transportation District is soliciting a Professional Services Agreement under solicitation 2026-B-038 for energy dissipation device inspection services as part of the Golden Gate Suspension Bridge Seismic Retrofit Contract 1. The selected consultant will provide a Contract Manager and Stainless Steel Fabrication Shop Inspectors to perform quality assurance and fabrication inspections at a steel fabrication shop located in the Birmingham, Alabama area. Key responsibilities include reviewing welder qualifications, welding procedure specifications, and procedure qualification records, as well as performing non-destructive testing and implementing Quality Assurance Inspection Work Plans. Deliverables include weekly fabrication reports, material inspection reports for every shipment, and a comprehensive health and safety plan. The award process is based on a 100-point evaluation of the Statement of Qualifications and Proposal, focusing on firm qualifications and experience (40 points), team qualifications (30 points), and project understanding and approach (30 points). The top three ranked proposers will be interviewed before a final selection is made. The contract utilizes a cost-plus-fixed-fee payment structure, with a planned execution date of February 1, 2027, and a notice to proceed on February 16, 2027. Compliance requirements are extensive, including adherence to California Labor Code prevailing wages, DBE participation under 49 CFR Part 26, and various fair employment and non-discrimination certifications. Proposers must submit their SOQ&P by December 1, 2026, exclusively through electronic means.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Certified Hazardous Waste Analytical Testing

California Department of Transportation

POSTED

about 19 hours ago

DEADLINE

Lead Testing and Environmental Sampling

Gwinnett County Government

POSTED

about 20 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling Services

OC Waste & Recycling

POSTED

about 21 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory Services

Maryland Transit Administration

POSTED

about 22 hours ago

DEADLINE

Environmental & Material Testing Services

POSTED

about 22 hours ago

DEADLINE

Third-Party Construction Materials Testing & Inspection

University of Massachusetts System

POSTED

about 23 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

University of Massachusetts System

POSTED

about 23 hours ago

DEADLINE

Site Investigation and Field Testing

City of Virginia Beach

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party Review

DAS Procurement

POSTED

about 24 hours ago

DEADLINE

Environmental Testing & Sampling Laboratory

NYS OGS Design & Construction - Construction Contractors

POSTED

DEADLINE

in about 1 month

Material Testing Services

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS