NON FOOD PRODUCTS

Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number for this procurement is 140A0318Q0098 and is issued as a Request for Quote (RFQ). Please email your quote by 12:00 pm (CST) Wednesday, July 25, 2018 The solicitation documents and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-99 dated June 15, 2018 This solicitation is 100% Small Business Set Aside The associated North American Industry Classification System code (NAICS) is 325612 and the size standard is 750 employees. The Bureau of Indian Affairs, Southern Plains Regional Office, intends to award a firm-fixed price contract for chemical list, please see attached listing. Period of Performance The day the contract is awarded August XX 2018 to July 31, 2019. Riverside Indian School does not have capability to store all quantities on the list. The contractor shall be responsible to store all items, and Riverside will place an order at least twice a week with the potential contractor, then the delivery shall be within one to two days. It is imperative the orders are delivered within one to two days after order has been placed. After the order has been received/accepted then the vendor can submit an invoice through Invoicing Platform Processing (IPP) www.ipp.gov. Delivery shall be in the early mornings 6:00 am to 9:30 am (CST) on each day. Cafeteria Building is an One story building, Physical Address Riverside Indian School 101 Riverside Drive, Anadarko Ok 73005. CLIN: 010 See Attached Chemical Listing/Dishwater Information. t is imperative that you review the attached Information pertaining to the Dishwasher. The containers are required to fit the dispenser of Hobart commercial dishwasher Hobart model number CRS66A. All proposed products need to have the correct sizes of containers to ensure its compatibility with the Hobart Commercial Dishwasher. If it does not fit the Hobart Commercial Dishwasher, it will be detrimental to Riverside Indian School. As a reminder, it is the responsibility of the contractor to correct any deficiencies or defects that may occur to the product after purchase. For full review of the clauses/provisions please visit www.acquisition.gov 52.217-1 [Reserved] 52.219-6 Notice of Total Small Business Set-Aside. As prescribed in 19.508(c), insert the following clause: Notice of Total Small Business Set-Aside (Nov 2011) (a) Definition. Small business concern, as used in this clause, means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation. (b) Applicability. This clause applies only to- (1) Contracts that have been totally set aside or reserved for small business concerns; and (2) Orders set aside for small business concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F). (c) General. (1) Offers are solicited only from small business concerns. Offers received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected. (2) Any award resulting from this solicitation will be made to a small business concern. (d) Agreement. A small business concern submitting an offer in its own name shall furnish, in performing the contract, only end items manufactured or produced by small business concerns in the United States or its outlying areas. If this procurement is processed under simplified acquisition procedures and the total amount of this contract does not exceed $25,000, a small business concern may furnish the product of any domestic firm. This paragraph does not apply to construction or service contracts. PROVISION FAR 52.212-1 -- INSTRUCTIONS TO OFFERORS -- COMMERCIAL ITEMS, applies to this acquisition. FAR 52.212-2 - EVALUATION - COMMERCIAL ITEMS (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Award will be made using a Lowest Price Technically Acceptable (LPTA) approach; the Government will award to the lowest priced offeror that is determined technically acceptable. The following factors shall be used to evaluate offers: Factor 1: Technical Capability: Comparable Product to Clean Force, containers are required to fit the dispenser of the Hobart Commercial Dishwasher, if it does not fit it will be deemed technically non-acceptable. Factor 2: Price Technical capability is equal to price. (b) Factor 1: Technical Capability 1. Technical capability of the item offered to meet the Government requirement shall be evaluated based on an evaluation of Technical Capability Factor; the factor will be rated as "Technically Acceptable" or "Technically Unacceptable." 2. Offeror shall meet all the requirements in RFQ and submit documentation to verify. 3. "Technically Acceptable" is defined as the item offered to the Government that meets the minimum requirements of the solicitation. 4. "Technically Unacceptable" is defined as the item offered to the Government that does not meet the minimum requirements of the solicitation. (c) Factor 2: Price 1. Price will be evaluated in order to determine if it is reasonable in accordance with FAR Parts 13.106-3 and 15.402(a)(2). Offers should be sufficiently detailed to demonstrate their reasonableness. (d) AWARD PROCESS: 1. The Government will first evaluate all quotations to ensure the quotation complies with all material aspects of the request for quotation thereby being determined as either "Responsive" or "Non-Responsive." 2. Responsive quotes will then be submitted for Technical Evaluation to determine those that are either "Technically Acceptable" or "Technically Unacceptable." 3. "Technically Acceptable" quotations will be then ranked according to Price. 4. The lowest priced offeror who is technically acceptable will receive the award. FAR 52.212-3 - OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision. FAR 52.212-4 - CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEM All terms and conditions identified under this FAR Clause are applicable to this Request for Quotation. FAR 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS -- COMMERCIAL ITEMS and FAR 52.212-5 -- CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS -- COMMERCIAL ITEMS (DEVIATION), applies to this acquisition. The clauses cited within this clause as indicated below are applicable: 52.203-6, 52.219-8, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-50, 52.223-3, 52.223-18, 52.225-1, 52.225-13, 52.232-33, 52.233-3, 52.233-4. FAR Clauses incorporated by reference: 52.204-7, 52.211-6, 52.217-8, 52.223-3, 52.232-1, 52.232-17, 52.232-25, 52.232-39, 52.243-1, 52.244-6, 52.246-2, 52.246-16, 52.247-34, 52.249-1 and 52.249-8. BUY AMERICAN¿ ¿SUPPLIES (MAY 2014) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (3) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (4) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Domestic end product¿ means¿ (1) An unmanufactured end product mined or produced in the United States; (2) An end product manufactured in the United States, if (i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (ii) The end product is a COTS item. End product means those articles, materials, and supplies to be acquired under the contract for public use. Foreign end product means an end product other than a domestic end product. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (See 12.505(a)(1)). (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled Buy American Certificate. (End of clause) Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (April 2013) Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP). "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. The Contractor must use the IPP website to register, access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email contact@example.gov or phone +1 (555) 000-0000. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. OMB MEMORANDUM M-11-32 Accelerating Payments to Small Businesses for Goods and Services This policy requires agencies to accelerate payment to small business prime contractors to the full extent permitted by law with the goal of making payment within 15 days of receipt of a proper invoice. In return, prime contractors are expected to accelerate payment to small business subcontractors when they receive accelerated payments from the Government. All questions shall be submitted via email to sara watkins at contact@example.gov. NO PHONES CALLS PLEASE. Please reference solicitation number 140A0318Q0098 in subject line of the email. Quotes are due on¿ Wednesday, 25 July 2018 at 12:00 pm (CST). Quotes may be sent via email to contact@example.gov. Quotes shall be good for 30 calendar days after close of RFQ. Offerors should check the FedConnect/FBO websites often for any solicitation amendments. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award and shall have NAICS code of 3¿25612¿¿ ¿listed in their registration. Or the will be award will be awarded to the next responsive offeror. End of Solicitation