Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

NONMETALLIC SPECIAL

Active
SPE8E5-26-T-3721Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonmetallic shaped section in gray, identified by NSN 9390-00-163-1209 and part number LS32373-1, with a quantity of 40 units measured in linear feet. The item is designated as a commercial item and classified as a critical application item, subject to stringent technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The product must conform to specified technical data packages referenced to drawings 98897 LS32373, 98897 STM23-402, and 98752 200415485, and must be packaged in accordance with DLA Packaging Requirements for Procurement RP001 and MIL-STD-129 labeling standards, with nonhazardous material adhering to ASTM D3951 unless superseded by DLA requirements. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from nonaccepted supplies. The contract mandates delivery FOB origin within 119 days, with inspection and acceptance occurring at the destination, and no variance permitted in quantity. The designated delivery point is DLA Distribution Warner Robins at Robins AFB, Georgia, with a need ship date of April 27, 2026, and an original required delivery date of August 7, 2026. Packaging must comply with the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow RP001. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3721, issued under NAICS code 327999, with primary point of contact Alexis Canalichio, and responses are due by August 10, 2026.

General Info

Procure 40 linear feet of gray nonmetallic section NSN 9390-00-163-1209, deliver FOB origin by April 27, 2026, to Robins AFB, comply with DLA tech and packaging standards.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

327999 - All Other Miscellaneous Nonmetallic Mineral Product ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3721.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Alexis Canalichio
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NONMETALLIC SPECIAL
NONMETALLIC SPECIAL SHAPED SECTION
COLOR GRAY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment 1 LG = 90 IN THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 98897 LS32373 REVISION NR DTD 06/24/1995 PART PIECE NUMBER: DWG P/N LS32373-1
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 98897 STM23-402 REVISION NR D DTD 02/20/1996 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 98752 200415485 REVISION NR E DTD 01/30/2020 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E5-26-T-3721
SECTION B
PR: 7014321119 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7014321119 0001 LG 40.000
NSN/MATERIAL:9390001631209
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:04/27/2026 Original Required Delivery Date:08/07/2026
SPE8E5-26-T-3721 NSN/Part Number: 9390-00-163-1209 Quantity: 40 LG Purchase Request: 7014321119QTY: 40 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327999
New
DIBBS
Nonmetallic Protective Sheet ManufacturingThe contract requires the manufacture of nonmetallic protective sheets that meet strict military specifications, with a specific emphasis on Type I shelf-life compliance, which is fixed at 18 months and non-extendable under Code K. These sheets must be suitable for defense applications, ensuring durability, reliability, and performance under demanding operational conditions. The production must adhere to all relevant standards to guarantee compatibility and safety within military logistics and equipment systems. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a solicitation posted on July 28, 2026, and responses due by August 10, 2026. The North American Industry Classification System code is 327999, indicating a focus on other nonmetallic mineral product manufacturing. Performance of the work is required at Fort Knox, Kentucky, with a zip code of 40121-5000. No set-aside preferences are specified, and the procurement is open to eligible subcontractors capable of fulfilling the technical and compliance requirements outlined in the military specifications.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEET, NONMETALLIC, PROTThe contract specifies the procurement of a nonmetallic protective sheet and related items identified by NSN 9390015957239 and part number 6440389-01M1, with seven separate line items each for one unit at a fixed price of one dollar, totaling a nominal contract value. All items must be delivered within five days to Fort Knox, Kentucky, under FOB origin terms with no tolerance for quantity variance, and inspections and acceptance are deferred to the destination point. The item is classified as a Type I shelf-life item with a strict 18-month non-extendable shelf life, and packaging must comply with MIL-STD-2073-1E, including specific preservative, wrapping, and unit containment procedures. Marking requirements follow MIL-STD-129 with a supplementary special marking code for shelf life, and palletized shipments must include two fluorescent yellow 10x10 inch MRAP placards in bold black lettering positioned at eye level on outside surfaces, unless shipped directly to end customers. OEMs are permitted to use designated colored stickers—green for BAE (TX), teal for OSHKOSH, purple for BAE (PA), orange for FPII, blue for NAVISTAR, and pink for GDLS—instead of yellow, and missing or exhausted yellow stickers do not trigger quality notifications. All shipments must be sent via traceable freight, excluding parcel post, with RDD and NMCS compliance, and freight details are directed to specific military addresses at Fort Knox. The contract references DLA’s Master List of Technical and Quality Requirements for all incorporated technical and quality standards, and packaging must align with RP001 DLA packaging protocols. The solicitation number is SPE8E5-26-T-3698, with a response deadline in August 2026 and a required delivery date of July 29, 2026.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
KNOBThe contract solicitation SPE7L1-26-T-843C is for the procurement of 22 KNOB units with part number RB67-OM1/8, under solicitation issued by the Defense Logistics Agency (DLA) Land Supply Chain, a component of the Department of Defense. Delivery is expected within 122 days from contract award, with FOB Origin terms and final acceptance occurring at the DDSP New Cumberland Facility in Pennsylvania. The item is subject to strict packaging and marking requirements governed by MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling and barcoding, and DLA’s RP001 standards for palletization, ensuring standardized handling and traceability across the defense supply chain. All packaging must comply with DLA’s preservation and material specifications, including use of CLNG/DRY preservation method and JA wrapping material, with no special marking required. The contract prohibits the intentional use of ozone-depleting substances and mercury compounds, except in specified functional applications such as batteries, fluorescent lamps, and authorized instruments, which must include secondary containment as per NAVSEA 5100-003D. Compliance with environmental and safety regulations is further reinforced by clauses prohibiting hexavalent chromium and requiring proper handling and labeling of hazardous materials under 29 CFR 1910.1200. Cybersecurity and information safeguarding are mandated through several FAR and DFARS clauses, including 252.204-7012 for safeguarding covered defense information, 252.240-7997 for NIST SP 800-171 assessment requirements, and 52.240-93 for basic safeguarding of contractor information systems, with deviations authorized in early 2026. The contractor must use Wide Area WorkFlow for all invoicing and receiving reports and must comply with electronic payment and submission protocols. Representations related to small business status, UEI, CAGE codes, and prohibited telecommunications equipment are required in the offer, and whistleblower, ethics, and anti-retaliation clauses are incorporated. Inspection and acceptance occur at the delivery point, with quality governed by referenced military standards and the DLA Master List of Technical and Quality Requirements. No contract value is specified, and the contract type remains undefined, while evaluation factors for award are not detailed in the solicitation. All submissions must be made through DIBBS
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC CHANNELThe contract pertains to the procurement of a nonmetallic channel, identified by NSN 9390-66-151-8787 and part number 18 LK from W. MCCULLOCH SON PTY LTD, with a single unit required to be delivered within 10 days under terms FOB origin. Delivery must be made to Rose Barracks South Camp Building 113 in Vilseck, Germany, with the shipment designated under RDD 555 and project code 9GU TP 2. Packaging must adhere strictly to DLA’s master technical and quality requirements, with precedence over ASTM D3951, and must comply with MIL-STD-129 for labeling and marking. If the item is classified as hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging in line with ASTM D3951 is acceptable. The unit of issue is EA with no tolerance for quantity variance. Inspection and acceptance occur at the destination. Palletization must conform to RP001 packaging standards. Transportation details follow DLAD PROC NOTES C19 and C20, and the contract is issued under solicitation SPE8E5-26-T-3713, with a response deadline of August 10, 2026, and an original required delivery date of December 19, 2025. The item is designated a critical application item and may involve covered defense information. Government use identifiers and contract data are strictly controlled, with primary point of contact listed as Nafis Beyah from the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
SLED
Sewer-Storm Manhole Covers, Frames and Risers 2026The solicitation for Sewer-Storm Manhole Covers, Frames and Risers 2026, identified by solicitation number 38161, is issued by the Town of Enfield in Connecticut and is open for responses through the official town website at www.enfield-ct.gov/bids.aspx. No electronic submissions will be accepted, and inquiries posted on this site will not be addressed; all questions and responses must follow the instructions provided in the official RFP document available online. The deadline for submitting responses is August 11, 2026, at 3:00 PM, and the contract is targeted for procurement activities in 2026 with performance expected within Connecticut. The primary point of contact for this solicitation is Carl R. Johnson, CCMO, who can be reached at cajohnson@enfield.org for official correspondence, and procurement is handled under the Connecticut Office of the Department of Administrative Services.
DAS Procurement

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 327999
New
Federal
Cobblestone Curbing and Molded Plastic Lumber Supply, Buffumville Lake, Charlton, MAThe contract requires the supply, shipment, delivery, and unloading of cobblestone curbing and molded plastic lumber to Buffumville Lake Park in Charlton, Massachusetts, with the explicit understanding that the Government will provide no assistance with unloading. This procurement is exclusively set aside for small business vendors under a total small business set-aside, governed by the NAICS code 327999 with a size standard of 750 employees. All prospective vendors must maintain an active registration in SAM.gov at the time of submission, as failure to do so will result in automatic rejection as nonresponsive. The solicitation is issued by the U.S. Army Corps of Engineers, Office of W2SD Endist New England, under solicitation number W912WJ26QA141, with a response deadline of August 7, 2026, at 6:00 p.m. Eastern Time. The primary point of contact for inquiries is Jennifer Samela, reachable via phone or email. All work must be performed at the specified location, and no additional support or resources will be provided by the Government beyond the terms outlined in the solicitation.
W2SD Endist New England

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 327999
New
DIBBS
Manufacture and Supply of Identification Marker (NSN 7690998418549)The contract requires the manufacture, packaging, and delivery of two specialized identification markers identified by NSN 7690998418549, fully compliant with technical, quality, and packaging standards established by the Defense Logistics Agency. The work must be performed in accordance with all DLA specifications, ensuring the final product meets rigorous military requirements for functionality and durability. The contract is classified as a subcontract under NAICS code 327999, indicating it falls within miscellaneous manufacturing categories, and the performance location is designated as Sioux City with a zip code of 51106-5165. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, leaving a brief window for interested parties to submit proposals. Although no solicitation number is provided, the contract can be accessed through the official DIBBS platform using the provided UI link. The contracting agency is the Department of Defense through the Defense Logistics Agency, and while details such as point of contact and set-aside status are not specified, the focus remains squarely on delivering two units to exacting federal standards within the outlined timeline and location.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 327999
New
DIBBS
KNOBThe contract pertains to the procurement of 29 units of a knob identified by NSN 5355-00-068-6173 under solicitation SPE7L3-26-T-135P, with a required delivery within 20 days after award. Full and open competition is applicable, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stated. All supplies must comply with DLA packaging standards, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, and any disclosure to foreign persons—even within the U.S.—requires prior authorization. Access to such data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, having completed mandatory DOD export control training, and being formally approved by DLA. The contract is managed by the Department of Defense’s Land Supplier Operations Vehicle Support office with Lee Miller as the primary point of contact, and responses are due by August 7, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC ANGLEThe contract is for the procurement of 14 units of NONMETALLIC ANGLE, identified by NSN 9390-01-212-3827, with performance required under drawing LS34297 and specifications based on MIL-DTL-5015. The material for parts D-2000 and D-15199 is DACRON, and all parts must be identified per MIL-STD-130. The drawing must be interpreted in accordance with ANSI Y14.5M-82. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, within or outside the U.S., with DFARS 252.225-7048 governing access. Only DLA contractors with approved JCP certification, completed export control training, and DLA authorization may access the controlled data. Delivery is scheduled for 141 days ADO, with FOB ORIGIN terms placing transportation risk and costs on the contractor until the goods are loaded at the origin point. Final delivery must be made to SW3119, DLA Distribution Warner Robins, at Robins AFB, GA 31098-1887, where inspection and acceptance by the government will occur. Packaging and labeling must comply with MIL-STD-129 for marking and barcoding, and MIL-STD-130 for part identification, while hazardous materials require adherence to FED-STD-313, TQ IP025, and the OSHA Hazard Communication Standard. Non-hazardous materials follow ASTM D3951 unless overridden by the DLA Master List. Invoices and receiving reports must be submitted electronically through WAWF per DFARS clauses 252.232-7003 and 252.232-7006. Cybersecurity compliance is mandated under 252.204-7012 and 252.240-7997, requiring implementation of NIST SP 800-171 safeguards and submission to DoD cybersecurity assessments. The contract prohibits acquisition of covered telecommunications equipment from Chinese military companies under 252.204-7018 and mandates compliance with multiple other FAR
WARNER ROBINS

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
DIBBS
MARKER, IDENTIFICATIThis contract, issued by the Defense Logistics Agency under solicitation SPE8E6-26-T-3877, pertains to the procurement of a Marker, Identificati with NSN 7690998418549 and part number 3A066-0691, in a quantity of 2 units. The delivery is required within 5 days of contract award, with FOB origin terms, and inspection and acceptance points set at the destination. The unit of issue is each (EA), with a fixed quantity and no variance allowed. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and the shipment must be sent via a traceable method, excluding parcel post. The delivery address and marking instructions are specified for W6KG AMSA 115 Sioux City IA, with the RDD designation indicating no special reporting requirement. The contract specifies government-only use fields and identifies a required delivery date of July 24, 2026, though the need ship date is unspecified. The supplier, IPECO HOLDINGS LIMITED, is required to meet all technical, quality, and logistical conditions set forth in the contract, including proper unit of issue alignment per ANSI X12 standards.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL SHThe contract solicits a NONMETALLIC SPECIAL SHAPED SECTION identified by NSN 9390-01-179-4508, with a quantity of 28 feet delivered on a coil at 25 feet per unit, under solicitation SPE8E5-26-T-3599 issued by the Defense Logistics Agency. Delivery is required within 10 days of award, FOB Origin, with inspection and acceptance occurring at the destination, Fort Hood, Texas, with a permitted quantity variance of plus 10 percent and zero percent minimum. Packaging must comply with MIL-STD-2073-1E using specific methods including QUP 025, preservation method 10, wrapping material CA, and unit container D4, with marking conforming to MIL-STD-129 and no special marking required. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001), and packaging must prevent distortion during shipping and storage, with a preference to avoid plastic wrapping, cushioning, or dunnage whenever possible. The item is classified as a Critical Application Item and involves Covered Defense Information, requiring compliance with DFARS 252.204-7012 for safeguarding and cyber incident reporting, as well as other cybersecurity and information handling clauses. The contract incorporates the DLA Master List of Technical and Quality Requirements and mandates adherence to the Berry Amendment and Buy American Act, alongside DFARS 252.225-7001. Offers must be submitted within the solicitation window, with a response deadline of July 30, 2026, and are subject to a prohibition on additive manufacturing; products produced via AM are ineligible. The contractor must be registered in SAM, use WAWF for invoicing and receiving reports, comply with hazardous material labeling under 29 CFR 1910.1200, and meet all socioeconomic representation requirements including Small Business, HUBZone, and women-owned status disclosures. Shipping must occur by traceable means excluding parcel post, and all documentation must align with the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. Automated award is possible, with preference potentially given to HUBZone concerns, and accelerated payments to small business subcontractors mandated. All representations and certifications must be validated in SAM, and the contractor must comply with whistleblower protections, trafficking in persons prohibitions,
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 327999
New
DIBBS
KNOBThe contract pertains to the procurement of a single unit of a knob identified by NSN 5355-01-516-5594 and part number 100-288-660, furnished under solicitation SPE7L1-26-T-879Y. Delivery is required within five days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, intermediate containment, and marking in accordance with MIL-STD-129 without special codes. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item except for approved functional uses such as batteries, fluorescent lamps, and sensors, with portable devices required to have shock-proof construction and secondary containment as specified by NAVSEA 5100-003D. Shipment must be delivered to USS BATAAN LHD 5 at FPO AE 09554 via traceable means—parcel post is explicitly forbidden—and must adhere to DLA transport protocol notes C19 and C20. The required delivery date is July 24, 2026, and the supplier must use the provided vendor identification and project codes. The contract enforces compliance with the DLA Master List of Technical and Quality Requirements, and all materials must be free from government identification if not accepted.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 332911
New
DIBBS
Small Business Prime Contractor (Set-Aside Opportunity)A total small business set-aside solicitation has been issued by the Department of Defense through the Warner Robins office for a prime contractor role focused on managing the sourcing, compliance, delivery, and invoicing of a hydraulic-pneumatic actuator. This opportunity is restricted exclusively to small businesses under the SBA’s Total Small Business Set-Aside program as defined by FAR 19.5, ensuring that only eligible small business entities may submit proposals. The North American Industry Classification System code for this requirement is 332911, indicating the work involves the manufacture of other fabricated metal products, specifically aligned with actuator production and supply chain management. The place of performance is specified as Robins AFB, Georgia, 31098-1887, and all activities must be conducted in compliance with federal procurement regulations governing subcontracting, delivery timelines, and financial reporting. Proposals must be submitted by the deadline of August 10, 2026, at 5:00 PM, with the solicitation posted on July 28, 2026. While the solicitation number is not provided, the official portal for submission and further details is the DIBBS system via the provided web link. The contract type is classified as a subcontract, meaning the winning small business will act as the prime contractor responsible for end-to-end oversight of the actuator supply chain including vendor selection, quality assurance, scheduling, and accurate invoicing. Failure to meet compliance standards, delivery schedules, or small business eligibility requirements will result in disqualification. Contractors must be prepared to demonstrate full adherence to federal contracting obligations and maintain all necessary certifications throughout the performance period.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
DIBBS
Packaging, Labeling, and Hazard Communication Compliance ServicesThe contract requires compliance with MIL-STD-129 standards for packaging and labeling of actuators intended for military shipment, ensuring all items are properly marked with Data Matrix barcodes for accurate tracking and inventory management. Additionally, the provider must supply OSHA-compliant hazard communication documentation, including material safety data sheets, to ensure proper handling and safety protocols are followed throughout the supply chain. All work must adhere to strict federal and military regulations, with attention to detail in labeling, documentation, and packaging integrity to meet defense logistics requirements. This is a total small business set-aside subcontract under NAICS code 541380, issued by the Department of Defense through the Warner Robins office, with performance expected at Robins AFB, Georgia, 31098-1887. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. Only small businesses are eligible to bid, and the contract emphasizes regulatory adherence and operational precision in support of military logistics operations.
Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
Hydraulic-Pneumatic Linear Actuator SupplyThe contract requires the supply and delivery of two hydraulic-pneumatic linear actuators identified by NSN 4810013013269 and part number D-8794, with full compliance to Department of Defense Logistics Agency packaging, labeling, and quality assurance standards. Delivery is specified as FOB Origin, meaning title and risk transfer to the buyer at the point of shipment, with final inspection to be conducted at the destination. The requirement is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively reserved for small businesses as defined by the Small Business Administration, and falls under NAICS code 332911 for Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the place of performance is identified as Robins Air Force Base, Georgia, 31098-1887. The contracting activity is managed under the Warner Robins office of the Department of Defense.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METALThe contract specifies the procurement of three aluminum alloy alclad metal sheets, each 0.063 inches thick, 48 inches wide, and 144 inches long, weighing approximately 43.545 pounds per sheet, with strict adherence to dimensional tolerances and no tolerance for test coupons. The material must conform to SAE AMS4100G Revision G dated January 1, 2024, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper of T761 and alloy designation of 7475, as defined in the Technical Data Package. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the DLA Troop Support QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution, potentially resulting in criminal penalties. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Contracting Officer. Continuous identification markings are required on each sheet, including the DLA contract number, NSN, specification revision, alloy, grade, manufacturer, heat and lot number, and exact dimensions, applied via stamping or stenciling in legible, waterproof, non-contaminating ink. Materials must be shipped in whole-foot lengths only with packaging strictly following MIL-STD-2073-1E, Level A requirements under ASTM B660, and MIL-STD-129R for labeling, including robust edge and corner protection and full surface coverage with fiberboard or equivalent material. Deliveries are due within 30 days after award date, shipped FOB origin to Warner Robins AFB, GA, with inspection and acceptance occurring at destination under a firm fixed price with zero quantity variance. Government identification must be removed from non-accepted supplies, and all documentation must be submitted in accordance with CDRL-METALSCERT requirements as referenced in the DLA Master List of Technical and Quality Requirements.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 3 hours
View Details
NAICS: 325520
New
DIBBS
PRIMER, SEALING COMPOUNThis contract is for the procurement of primer and sealing compound, a solventless product based on methacrylic ester monomers and organic peroxide, intended for use with anaerobic acrylic threadlocking and retaining compounds. The item is identified by NSN 8030-01-388-5605 and must be furnished in 1 fluid ounce bottles, with a total quantity of 33 ounces required. The product has a non-extendable shelf life of 12 months and must be stored and shipped within a temperature range of 46°F to 70°F, kept out of direct sunlight. Compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandatory, including the inclusion of lot or batch numbers and the special marking code 32 to denote Type I shelf-life classification. Packaging must adhere to DLA-specific requirements, including RP001 for palletization and IP025 for hazardous materials handling, with intermediate packaging limited to no more than 25 units per corrugated fiberboard box under Uniform Freight Classification standards. The product is classified as hazardous under OSHA's Hazard Communication Standard, requiring suppliers to submit Safety Data Sheets (SDS) compliant with 29 CFR 1910.1200, along with HCS-compliant labels, and to train employees on these requirements. Delivery is FOB destination to Robins Air Force Base, Georgia, with a required delivery timeline of 32 days from award, and no tolerance is permitted for quantity variance. The contract utilizes the Defense Logistics Agency's authorized unit of issue, and all shipments must include complete government-compliant markings and documentation. The solicitation is issued under SPE8ES-26-T-2418 and falls under Simplified Acquisition Procedures, with award potentially made automatically. Mandatory FAR and DFARS clauses govern compliance with cybersecurity (252.204-7012), hazardous materials handling (52.223-3), small business representations, employment eligibility, trafficking in persons, and sustainable procurement. Payment must be processed through Wide Area WorkFlow (WAWF), and acceptance occurs at the destination upon inspection by government personnel using referenced technical and quality standards from the DLA Master List.
Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
ACTUATOR, HYDRAULIC-The contract specifies the procurement of two hydraulic-pneumatic linear actuators with part number D-8794 and NSN 4810013013269 under solicitation SPE7MC-26-T-156Q, issued by the Defense Logistics Agency for a total small business set-aside. Delivery is required FOB origin within 161 days of award, with a mandatory ship date of January 19, 2027, and an original required delivery date of January 5, 2027. The unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements RP001, unless superseded by higher-priority technical or quality standards listed in the DLA Master List of Technical and Quality Requirements. The deliver point is DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLAD Proc Notes C19 and C20. The total contract value is based on a unit price of $0.00 per item, resulting in a total of $0.00, indicating this may be a placeholder or administrative line item, though the quantity is clearly stated as two units. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 332911, and the primary point of contact is Paula McClary at DLA.
Industrial Valve Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332112
New
DIBBS
BAR, METALThe contract specifies the procurement of extruded aluminum alloy 7075 in T6 temper, formatted as flat bar with a thickness of 2.500 inches, width of 4.000 inches, and lengths between 10 and 12 feet in whole-foot increments only, with a reference weight of 12.100 pounds per foot. The material must fully comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including SAE AMS-QQ-A-200/11A, ASTM B666/B666M-20, ASTM B660-23, and MIL-STD-129R. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot numbers, and dimensions, applied via stamping or stenciling that is legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags for wire. A Certificate of Quality Compliance must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. This procurement is subject to the Qualified Suppliers List for Distributors requirement, limiting eligibility to suppliers explicitly listed on the QSLD; any deviation must be clearly indicated, and non-compliance may result in rejection, penalties, or criminal liability. Source inspection is waived for QSLD-compliant suppliers, and CDRL-METALSCERT certification is mandatory. Packaging must adhere to MIL-STD-2073-1E with preservation per ASTM B660 and marking per MIL-STD-129. The items are to be delivered FOB origin in 135 days, with a total quantity of 68 feet at $68.00 per foot under solicitation SPE8E4-26-T-1930. A 10% quantity variance is permitted. Critical application status applies, and delivery is to Robins AFB, Georgia, with a required ship date of December 21, 2026, and original delivery due January 3, 2027. All shipments must include dual-unit markings when applicable, and palletization must follow DLA packaging requirements.
Nonferrous Forging

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks a subcontractor to assist the prime contractor in achieving compliance with NIST SP 800-171 standards and preparing for a CMMC Level 2 self-assessment, focusing on the implementation of required cybersecurity documentation and system controls. The work will involve evaluating current security practices, identifying gaps in compliance, and developing or enhancing policies, procedures, and technical controls aligned with NIST guidelines to meet the requirements of CMMC Level 2. The subcontractor is expected to provide expert guidance throughout the assessment preparation process to ensure the prime contractor can successfully demonstrate compliance without external audit. This opportunity is designated as a Total Small Business Set-Aside under the SBA program with a NAICS code of 541512, indicating it is specifically reserved for small businesses in the computer systems design and related services sector. Performance of the contract will occur at Robins Air Force Base, Georgia, with a response deadline of August 6, 2026, and the solicitation was posted on July 26, 2026. The contracting activity is under the Department of Defense, specifically the Warner Robins organization, and the task is part of a broader effort to strengthen cybersecurity readiness across the defense industrial base.
Computer Systems Design Services

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Hazardous Materials Handling & TransportationThe contract pertains to the specialized transportation and handling of hazardous materials such as lubricants and preservatives used in conjunction with valves, requiring strict adherence to federal regulations including DOT, OSHA, and DLAD Proc Notes C19 and C20. All activities must be performed in full compliance with safety and environmental standards to ensure the secure movement and management of these materials, with the primary place of performance specified as Robins AFB, Georgia, 31098-1887. This is a subcontract solicitation under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, and it is classified under NAICS code 484220 for truck transportation of hazardous materials. The solicitation was posted on July 26, 2026, with a mandatory response deadline of August 6, 2026, and is managed under the Department of Defense by the Warner Robins office.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332439
New
DIBBS
Military-Grade Packaging & Preservation ServicesThe contract requires the provision of Level A1 preservation and packaging services in strict accordance with MIL-STD-2073-1E and labeling that meets the specifications of MIL-STD-129 for the shipment of military hardware to the Defense Logistics Agency. All work must ensure long-term protection against environmental degradation during transport and storage, with precise adherence to military standards for materials, methods, and documentation. The packaging must be designed for secure handling, transit, and long-term readiness in operational environments, and labeling must include all required data elements to support accurate identification, inventory control, and distribution. This is a total small business set-aside subcontract under NAICS code 332439, open exclusively to qualified small businesses as defined by the SBA. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and performance is to be conducted at Robins Air Force Base, Georgia, with a specific zip code of 31098-1887. The contracting activity falls under the Department of Defense, managed by the Warner Robins office, and all deliverables must be fully compliant with federal military logistics standards to support DLA’s supply chain requirements.
Other Metal Container Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332913
New
DIBBS
Precision Valve Manufacturing & SupplyThe contract calls for the manufacture and supply of 23 precision fluid pressure regulating valves identified by NSN 4820009833598, engineered to meet strict military specifications ensuring complete form, fit, function, and durability under operational conditions. All units must be produced to exacting standards required for use in defense systems, with a focus on reliability and performance in demanding environments. The work is to be performed at Robins AFB, Georgia, with delivery and compliance verification tied to the contract’s fulfillment requirements. This is a small business set-aside subcontract under FAR 19.5, reserved exclusively for small businesses, and falls under NAICS code 332913 for other fabricated metal product manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is managed by the Department of Defense through the Warner Robins office. Participation is restricted to qualified small business entities capable of meeting military-grade quality and production timelines, and the contract is accessible via the DIBBS online platform for registered vendors.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

3 days ago

DEADLINE

in 8 days
View Details