Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Notice of Intent for Steel-Backed Rubber Chablon Blanket Purchase Agreement

Active
2031ZA26N00048Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Treasury Common Services Center – Acquisition Services plans to award a five-year sole source Firm Fixed Price blanket purchase agreement to Kaspar Graphic Solutions for steel-backed rubber chablon plates, exclusively for use by the Eastern and Western currency facilities of the Bureau of Engraving and Printing. These plates are proprietary components that can only be sourced from Kaspar Graphic Solutions, justifying the sole source procurement under FAR Subpart 6.302-1(a)(2)(ii)(b). No competitive solicitation will be issued, and this notice serves solely as an announcement of intent, not a request for proposals or quotes. Any information submitted in response will be evaluated only to determine whether competition is feasible, and respondents bear all costs associated with their submissions without reimbursement. All responses, including capability statements, comments, or questions, must be submitted exclusively via email to kendra.napper@bep.gov no later than 3:00 PM Eastern Daylight Time on July 27, 2026. Interested parties must be registered and actively maintained in the System for Award Management (SAM) to be considered. The contracting office is located at 14th & C Streets SW, Washington, DC 20228, and the procurement is classified under NAICS code 332999 with no set-aside provisions. The solicitation number is 2031ZA26N00048, and while the opportunity will not be publicly posted, points of contact include Kendra Napper as the primary liaison and Erica Hemphill as secondary.

General Info

Sole source five-year contract to Kaspar Graphic Solutions for proprietary steel-backed rubber chablon plates, no competition, SAM registration required, responses due July 27, 2026.

Agency

Department Of The Treasury → Bureau Of Engraving And PrintingView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

Washington, DC, 20228, USA

Set-Aside

NONE

Documents

(4)

75D-07.0-04 EHS Contractor Requirements Revision 6

PDFspecifications

75B-07.0-06 EHS Requirements for Large Equipment Purchases Revision 7

PDFspecifications

Notice+of+Intent+to+Award+Sole+Source_Steel-Backed+Rubber+Chablon+Plates+BPA.pdf

PDF

SOW_Rubber+Chablon+BPA.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Treasury → Bureau Of Engraving And Printing
Contacts2 people available
OfficeN/A
Organization / Agency
Department Of The Treasury → Bureau Of Engraving And Printing
View Agency Profile
Office AddressN/A
Contacts
Kendra Napper
Erica Hemphill

Full Description

Show more

NOTICE OF INTENT TO AWARD SOLE SOURCE



Steel-Backed Rubber Chablon Plates Blanket Purchase Agreement



The Treasury Common Services Center- Acquisition Services intends to award a five (5) year sole source Firm Fixed Price blanket purchase agreement on behalf of the Office of Engraving for steel-backed rubber chablon plates for the Eastern and Western currency facilities. The plates are proprietary and can only be acquired from Kaspar Graphic Solutions.  Therefore, the Government intends to award a sole source contract to Kaspar Graphic Solutions in accordance with FAR Subpart 6.302-1(a)(2)(ii)(b).



This notice of intent is not a request for competitive offers/quotes/proposals. A determination not to compete this requirement is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement.  Any cost associated with the preparation and submission of data or information, or any other costs incurred in responding to this notice is the sole responsibility of the respondent and will not be reimbursed by the Government. 


**The solicitation will not be posted**


Capability statement, comments, questions or concerns regarding this notice MUST be received via email ONLY to kendra.napper@bep.gov NO LATER THAN 3:00PM, EASTERN DAYLIGHT TIME, 27 July 2026. Additionally, interested sources must be registered and currently active in the System for Award Management (SAM), found at https://www.sam.gov.


Contracting Office Address


14th & C Streets SW


Washington, DC 20228

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
SPACER, SPECIAL SHAPEDThe contract pertains to the procurement of 35 units of a special-shaped spacer with NSN/Part Number 5365-01-588-4009 under solicitation SPE4A7-26-T-595E, with a delivery deadline of 169 days after award. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless overridden by a Quality Assurance Letter of Instruction. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels set at VII, IV, and II for critical, major, and minor attributes respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. The supplier must adhere to DLA packaging requirements and technical/quality standards referenced in the DLA Master List, with revisions controlled based on acquisition size and amendment dates. Physical marking of the item is required, and cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. Export control provisions apply due to technical data governed by ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization; only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access this data. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance in Barstow, CA 92311-5014, and primary point of contact is Tamera Greene.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
HINGE, DOOR, VEHICULAThe contract pertains to the procurement of a single hinge assembly designated as HINGE, DOOR, VEHICULA with NSN 2510-01-644-9137, required for delivery within five days of award. The solicitation number is SPE7L1-26-T-877F, issued by the Department of Defense’s Land Supply Chain under the NAICS code 332999, with a response deadline of August 6, 2026. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, incorporated by reference and enforced under the control revision guidelines applicable to the solicitation issuance date. Cybersecurity compliance is mandated at CMMC Level 2 for any third-party assessment organization involved. The technical data associated with this item is controlled under ITAR or EAR export regulations, prohibiting any unauthorized disclosure to foreign persons or entities, including foreign national employees and subsidiaries, and requires strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received explicit authorization from DLA. Additionally, requirements for configuration change management, removal of government identification from non-accepted supplies, and compliance with DLA packaging standards are active. The designated place of performance is Fort Riley, Kansas, with Kristina Derry listed as the primary point of contact for inquiries.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract pertains to the procurement of a hose assembly, nonmetallic, with the NSN 4720-01-488-6121 and part number 7-554-204301, for a quantity of four units. Delivery is required within 150 days from the contract date, with shipment to be made FOB origin, and inspection and acceptance to occur at the destination. The item must comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and no ozone-depleting chemicals may be used in its manufacture or incorporation. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging methods, materials, and container codes detailed in the contract. The unit of issue is each, and pricing is set at $4.00 per unit for a total price of $16.00. The contract explicitly prohibits any variance in quantity, allowing neither plus nor minus tolerance. The delivery location is the DLA Distribution Barstow Central Receiving Warehouse, and the required delivery date is January 4, 2027. The solicitation, issued under SPE7M4-26-T-286U, was posted on July 26, 2026, with responses due by August 6, 2026, and is classified under NAICS code 332999 for other miscellaneous manufacturing. The point of contact for inquiries is Blake Tushar, with contact information provided. All transportation and shipping instructions must follow the referenced DLA procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
SHACKLEThe contract pertains to the procurement of 400 shackles identified by NSN 4030-01-197-2334, with the solicitation number SPE4A5-26-T-308N, issued under a Total Small Business Set-Aside as defined by FAR 19.5. The requirement is for a critical application item, with approved parts from Oshkosh Defense LLC and Columbus McKinnon Corporation, but no approved technical data package exists, rendering the procurement non-competitive due to proprietary or insufficient technical data. Deliveries are divided across three CLINs totaling 400 units—200, 30, and 170 units respectively—with a firm fixed price of $0.00 per unit and total price of $0.00, indicating a no-cost or administrative entry, while delivery is due 169 days after award. All items must be delivered FOB origin with zero variance in quantity, inspected and accepted at destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s packaging requirements. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise specified. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements for all referenced technical and quality standards. Delivery destinations are distributed to DLA depots in Tracy, CA; Hill AFB, UT; and Robins AFB, GA, with a requirement to ship no later than January 20, 2027, and original delivery deadlines between January 30 and February 14, 2027. The NAICS code is 332999 and the point of contact is Hien-Van Trinh of the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThis contract is for the procurement of a hose assembly, nonmetallic, with the NSN 4720-01-488-6122 and part number 7-554-204201, supplied by GROVE U.S. LLC. The requirement calls for four units to be delivered within 86 days, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. All packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including unit packaging that protects the hose from circulating air and ultraviolet light exposure, and marking must adhere to MIL-STD-129 with no special marking required. The item is subject to the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, which govern all technical and quality specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes must be submitted for approval unless explicitly permitted by the specification. The contract specifies a fixed quantity with zero variance allowance, and the delivery is scheduled for November 1, 2026. Transportation instructions reference DLAD procedural notes C19 and C20, with shipment directed to the DLA Distribution Albany warehouse in Albany, Georgia. The solicitation was issued under contract number SPE7M4-26-T-286Y, with a response deadline of August 6, 2026, and is categorized under NAICS 332999 as a federal procurement managed by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETALThe contract specifies the procurement of five nonmetallic hose assemblies with the NSN 4720-01-455-5502 for delivery within 261 days of award. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Packaging and handling must comply with DLA specifications, including the removal of government identification from non-accepted supplies, configuration change management through formal engineering change proposals or variance requests, and physical identification marking of bare items. The item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior authorization from the DLA. The solicitation number is SPE7M4-26-T-286T, issued on July 26, 2026, with responses due by August 6, 2026, under NAICS code 332999, and performance is designated for New Cumberland, PA, 17070-5002. Primary point of contact is Blake Tushar at the Defense Logistics Agency’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
MOUNTING KIT, BODY, VThe contract specifies the procurement of a Mounting Kit, Body, V, with NSN 2510-99-464-2470, for a quantity of four kits, to be delivered within 165 days under solicitation SPE7L3-26-T-134L. Delivery is FOB origin with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The kit must comply with MIL-STD-2073-1E packaging standards, requiring each kit to be individually packaged with a parts list inside containing part names, numbers, and quantities. Preservation and packaging must meet Appendix D requirements for kits, ensuring adequate protection for the most critical component within the kit. The contractor must use packaging design validated under ASTM D4169 Distribution Cycle 18, Assurance Level II, Acceptance Criteria 3, or provide approved military packaging validation documentation. Marking must follow MIL-STD-129 with special segregation and identification requirements as per Appendix D, Paragraph D.4.2. Palletization must adhere to DLA packaging requirements, and no ozone-depleting chemicals are permitted in any component. The unit of issue is KT, and packaging codes and methods are strictly defined, including use of ZZ codes for special requirements. All technical and quality standards referenced are incorporated via the DLA Master List of Technical and Quality Requirements. The point of contact for the contract is Viviane Kounkorgo of the Department of Defense, with the place of performance identified as New Cumberland, PA, 17070-5002.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of The Treasury → Bureau Of Engraving And Printing

Same awarding agency

NAICS: 561920
Federal
Compressed Gas Cylinder Handling & Safety ComplianceThe contract requires comprehensive adherence to OSHA and Compressed Gas Association standards for the safe handling, storage, and labeling of compressed gas cylinders used in manufacturing operations. All activities must ensure personnel safety and regulatory compliance throughout the lifecycle of cylinder use, including transportation, positioning, securing, inspection, and disposal procedures. The work is to be performed at the Bureau of Engraving and Printing’s facility in Washington, D.C., with a zip code of 20228, and is classified under NAICS code 561920, indicating it falls under miscellaneous support services with a focus on specialized safety and operational support. This subcontract is posted with a response deadline of July 27, 2026, and is intended for entities capable of delivering robust compliance programs tailored to high-risk gas handling environments. The solicitation does not specify a set-aside type or point of contact, and the agency is part of the Department of the Treasury. Contractors are expected to demonstrate proven experience in industrial gas safety, documentation of regulatory adherence, and the ability to implement and sustain protocols that prevent accidents, mitigate hazards, and maintain continuous compliance in a federal manufacturing setting. All work must align with federal safety mandates and be executed without disruption to ongoing production activities at the site.
Convention and Trade Show Organizers

POSTED

14 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 561410
Federal
Environmental Records & Punch List ManagementThe contract requires the compilation and final delivery of comprehensive environmental compliance records to satisfy punch list requirements at contract closeout, ensuring all documentation meets strict auditability and regulatory traceability standards. All records must be meticulously organized to align with the Bureau of Engraving and Printing’s Environmental Business Plan (BEP) criteria, demonstrating full adherence to applicable environmental regulations throughout the project lifecycle. The deliverables are not merely administrative but form a critical component of closure compliance, necessitating precise tracking, verification, and documentation of every environmental control activity. The solicitation is classified as a subcontract under NAICS code 561410, targeting services related to administrative and support services for waste management and remediation. Performance is localized in Washington, D.C., with a zip code of 20228, and the opportunity is managed by the Department of the Treasury through the Bureau of Engraving and Printing. The response deadline is set for July 27, 2026, at 7:00 p.m. Eastern Time, and while no specific set-aside designation is listed, eligibility is restricted to subcontractors capable of delivering certified environmental compliance documentation under federal oversight. The requirement emphasizes precision, accountability, and readiness for third-party audits, making thorough documentation and procedural compliance non-negotiable.
Document Preparation Services

POSTED

14 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 541690
Federal
Chemical Safety Compliance & SDS ManagementThe contract titled Chemical Safety Compliance & SDS Management requires the preparation, submission, and ongoing management of Safety Data Sheets for chemical products utilized in manufacturing operations, with a strict focus on adherence to FAR 23.302 regulatory standards. This includes ensuring accurate and timely documentation that reflects the hazards, handling procedures, and safety measures associated with all applicable chemicals, and coordinating closely with the Bureau of Engraving and Printing’s Office of Environment, Health and Safety to maintain alignment with federal safety protocols and internal policy requirements. The scope demands continuous monitoring of chemical inventories and regulatory updates to guarantee sustained compliance and operational readiness. The work is performed under a subcontract arrangement with a North American Industry Classification System code of 541690, and the place of performance is designated as Washington, DC, with a zip code of 20228. The solicitation was posted on July 13, 2026, and responses are due by July 27, 2026, at 7:00 PM. The contracting entity is the Bureau of Engraving and Printing, an agency under the Department of the Treasury, and the successful contractor will be expected to deliver high-reliability SDS documentation and proactive risk management oversight to support safe manufacturing processes within a highly regulated federal environment.
Other Scientific and Technical Consulting Services

POSTED

14 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Hidden Machine-Readable Security Features - FY26The Bureau of Engraving and Printing (BEP), under the Department of the Treasury, has issued a Request for Information (RFI) designated 2031ZA26N00005 seeking innovative, hidden machine-readable security features for future U.S. currency. This RFI, posted on November 14, 2025, with a response deadline of November 15, 2026, is intended solely for market research and informational purposes and does not constitute a formal solicitation or contract. BEP aims to gather technical descriptions and preliminary non-proprietary samples of novel security technologies that are difficult to detect, reverse-engineer, or duplicate, and can be authenticated by standalone detection systems. The features sought must be new, not publicly disclosed or commercially available, and compatible with currency production and durability standards under typical environmental conditions. Respondents are required to submit a capability statement, brief technical descriptions, and physical preliminary samples to the BEP office in Washington, D.C. The evaluation will focus on four key technical attributes: the feature’s concealment from experts, resistance to functional analysis, machine readability by a discriminating detection device, and resistance to simulation or duplication both materially and functionally. The RFI emphasizes that no proprietary or classified information should be submitted, as BEP may use non-proprietary responses in future solicitations. Correspondence and submissions may be sent either electronically via designated BEP officials or physically to the BEP’s Office of Technology & Development. This RFI carries no commitment for contract award or payment, does not require standard certifications or compliance statements, and does not include contract clauses, pricing, or performance periods. The information obtained will inform future research and development efforts but creates no binding contractual obligations on the government.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

8 months ago

DEADLINE

in 4 months
View Details
NAICS: 541715
Federal
Bureau of Engraving and Printing (BEP) Request for Information (RFI) - R&D Overt Security Features - FY26The Bureau of Engraving and Printing (BEP), operating under the Department of the Treasury, has issued a Request for Information (RFI) numbered 2031ZA26N00006, seeking input on research and development of overt security features for U.S. currency. The objective is to identify novel counterfeit deterrent technologies that are easily recognizable by the general public without special tools and are resistant to replication by printing, digital reproduction, or commercial simulation. Respondents are invited to submit preliminary physical samples alongside brief technical descriptions and capability statements that demonstrate the proposed features' effectiveness, durability, environmental acceptability, and compatibility with existing currency production processes. This initiative is strictly for market research purposes, with submissions due by 2:00 PM Eastern Time on November 15, 2026. The place of performance and submission is Washington, D.C., specifically the BEP office at 301 14th Street, SW. This RFI does not constitute a solicitation or contract and imposes no binding obligations or financial commitments on the government. There are no formal contract clauses, representations, certifications, or pricing information associated with this request. The government will not pay for any proposals or responses received and reserves the right to use non-proprietary information obtained through this inquiry in future procurements. Evaluation considerations, while informal, will focus on innovation, ease of public authentication, and resistance to counterfeiting, but no formal evaluation criteria, weights, or awards are established. Submissions should avoid classified or proprietary information unless properly marked, and responses must be submitted via email to the designated points of contact at BEP. The RFI represents an exploratory step to inform potential future solicitations aimed at enhancing the overt security features of U.S. currency.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

8 months ago

DEADLINE

in 4 months
View Details