Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

NOZZLE, FUEL AND OIL SE

Active
SPE7M4-26-T-370WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-370W, is for the procurement of five fuel and oil servicing nozzles with part number 4930-01-543-5623. The contract requires adherence to specific DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. Item Unique Identification is not required for this order. The delivery timeline is set for 238 days after order, and the place of performance is located in New Cumberland, Pennsylvania. Quality assurance and sampling must be conducted according to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Responses to this solicitation are due by September 8, 2026.

General Info

DoD procurement of five fuel and oil servicing nozzles due September 8, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-370W Request for Quotations

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NOZZLE,FUEL AND OIL SERVICING
NOZZLE,FUEL AND OIL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 4930-01-543-5623 Quantity: 5 EA Purchase Request: 7018069305QTY: 5 Delivery: 238 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
Federal
61--CABLE,POWER,ELECTRICAL
Solicitation # SPE7M126T316K
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of 5,000 feet of electrical power cable under NSN 6145009056797. This is a Qualified Products List item with a delivery requirement of 228 days after the order is placed, shipping to DLA Distribution W1A8. The solicitation, numbered SPE7M126T316K, is designated as a total small business set-aside under NAICS code 331318. Interested and responsible sources must submit their quotes electronically by the deadline of September 8, 2026. All necessary military specifications and standards are available electronically, and the full solicitation is accessible via the provided link. Inquiries regarding this procurement should be directed to the buyer through the DIBBS portal.
DLA Land And Maritime

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-281M
Solicitation SPE7M1-26-T-281M, issued by the DLA Land and Maritime Maritime Supply Chain, is a request for quotations for electrical wire under NSN 6145009176378. The requirement consists of two line items totaling 37,000 feet, with 11,372 feet destined for DLA Distribution San Joaquin in Tracy, California, and 25,628 feet for the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The procurement is not a small business set-aside and falls under NAICS code 331318. Delivery is required within 130 days after order, with specific need ship dates in August 2025 and July 2026, and an original required delivery date of March 26, 2027. The technical specifications require compliance with SAE AS22759/5A and SAE AS22759E, noting that the item is a critical application item and listed on a primary QPL or QML. Packaging and preservation must adhere to MIL-DTL-12000, MIL-STD-2073-1E, and RP001, with marking conducted per MIL-STD-129. The contract specifies a quantity variance of plus or minus 5 percent, with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. Safeguarding of covered defense information is required per DFARS 252.204-7012.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in about 13 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M1-26-T-271C
Solicitation SPE7M1-26-T-271C is a total small business set-aside for the procurement of 25,000 feet of special-purpose cable, identified by NSN 6145-01-225-1396. The cable must comply with MIL-DTL-24640/15E and is subject to a quantity variance of plus or minus 5 percent. Delivery is required 164 days after the date of order, with a need ship date of February 2, 2027, and a final required delivery date of March 4, 2027. The place of performance and delivery is DLA Distribution San Joaquin in Tracy, California, with shipping terms established as FOB Origin. The contract mandates strict adherence to military standards for packaging, marking, and preservation, specifically MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Special attention is required for mercury restrictions per NAVSEA 5100-003D, which prohibits the intentional addition of mercury except in specified functional applications. Depending on the assigned advice code, the material must be provided in continuous lengths. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with various FAR and DFARS clauses regarding small business representations, hazardous material labeling, and the use of U.S.-flag vessels for ocean transportation.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in about 13 hours
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M0-26-T-061J
This contract is for the procurement of 500 feet of electrical wire, identified by NSN 6145-01-060-7863 and part number M22759/16-18-9. The item is classified as a critical application commercial item and must adhere to SAE AS22759/16A and SAE AS22759E standards. Delivery is required within 5 days after receipt of order, with a final required delivery date of August 20, 2026, shipped FOB destination to the USNS Charles Drew. The supplier must comply with DLA packaging requirements, including MIL-STD-2073-1E and MIL-DTL-12000 for cable and wire preservation. Because the advice code is 2N, the material must be provided in a single continuous length; multiple unit packs are unacceptable. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. The procurement is subject to the DLA Master List of Technical and Quality Requirements and requires adherence to the Qualified Products List or Qualified Manufacturers List.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-311E
This contract is for the procurement of 500 feet of special purpose electrical wire, identified by NSN 6145014748098 and part number M27500B20WK1G24. The item is designated as a critical application item and must comply with NEMA WC 27500-2025 standards and the Qualified Products List or Qualified Manufacturers List. Delivery is required within 175 days, with a required delivery date of March 3, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Strict compliance is required regarding the prohibition of Class I ozone depleting chemicals and the protection of covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, following DLA packaging requirements for procurement. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The contract allows for a quantity variance of plus or minus 5 percent, with inspection and acceptance occurring at the destination.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-311L
This contract is for the procurement of 11,500 feet of electrical wire, identified by NSN 6145-01-008-1202 and part number M22759/11-28-9. The item is classified as a commercial critical application item and must adhere to SAE AS22759/11A and AS22759E standards. The material must be provided in 500-foot spool lengths, with specific requirements for continuous length based on the applicable advice code. The contract mandates that mercury or mercury-containing compounds shall not be intentionally added to the supplies, except where functionally required by specified systems. The order is subject to a quantity variance of plus or minus 5 percent and requires delivery to DLA Distribution Depot Hill within 160 days. Packaging and preservation must comply with MIL-DTL-12000 and MIL-STD-129, with palletization following DLA packaging requirements. This is a full and open competition procurement that requires adherence to the Qualified Products List or Qualified Manufacturers List. Inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M2-26-T-6523
This contract is for the procurement of 500 feet of special purpose cable, identified by NSN 6145-01-225-2204 and part number M24640/15-06UO. The material must adhere to basic specification MIL-DTL-24640/15E and is designated as a critical application item. Because the advice code is 2N, the cable must be provided in a single continuous length; multiple unit packs are strictly unacceptable. The supplier must comply with several technical and quality requirements, including DLA packaging standards, the removal of government identification from non-accepted supplies, and strict prohibitions against the intentional addition of mercury or mercury-containing compounds. Delivery is required within 20 days ADO to the Serco Kitting Facility in Oxnard, California, via traceable shipping methods. The contract allows for a quantity variance of plus 10 percent and minus 0 percent, with inspection and acceptance occurring at the destination.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-03T3
This contract is a solicitation for the procurement of three helical compression springs under NSN 5360-01-067-5024. Issued by the Department of Defense Land Supply Chain, the requirement specifies a delivery timeline of 188 days after order. The procurement is governed by NAICS code 331318 and requires adherence to DLA packaging standards and identification marking per MIL-STD-130N. Quality assurance is strictly regulated, requiring sampling methods consistent with MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Additionally, the contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M2-26-T-6517
This contract is for the procurement of 254 feet of electrical wire, identified by NSN 6145-01-429-8510 and part number M22759/9-8-2. The material must adhere to SAE AS22759/9A and SAE AS22759E standards. A critical requirement is that the manufacturer must be Qualified Products List approved at the time of the contract award. The items are designated as critical application items and must be free of intentionally added mercury, except where functionally required by specific NAVSEA standards. Delivery is set for 105 days after the order, with a quantity variance allowed of plus or minus 5 percent. Packaging and preservation must comply with MIL-DTL-12000 and MIL-STD-2073-1E, with marking following MIL-STD-129. Depending on the assigned advice code, the material must be provided in continuous lengths, as multiple unit packs may be unacceptable. The final destination for shipping and inspection is DLA Distribution Warner Robins in Georgia.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
Metal Surface Treatment (Anodizing/Plating/Polishing)This subcontract opportunity with the Department of Defense Maritime Supply Chain involves providing specialized metal surface treatment services, including plating, polishing, anodizing, and coloring for metal components. The work is categorized under NAICS code 331318 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on August 25, 2026, with a response deadline of September 8, 2026. Interested parties can find further details and submission instructions through the provided DIBBS link.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-305V
This contract is for the procurement of 3,500 feet of electrical wire, identified by NSN 6145-01-385-4838. The item is classified as a commercial critical application item and must adhere to the Qualified Products List or Qualified Manufacturers List. Technical specifications are governed by MIL-DTL-25038/3E and MIL-DTL-25038J, with specific requirements for continuous length based on the assigned advice code. Delivery is required within 160 days, with a required delivery date of January 18, 2027, shipping FOB Origin to DLA Distribution Warner Robins. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements, with a quantity per unit pack of 500 feet per spool and a minimum length of 100 feet. The contract allows for a quantity variance of plus or minus 5 percent, and inspection and acceptance will take place at the destination.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
LUBRICATOR
Solicitation # SPE8EE-26-T-2396
This contract, identified as SPE8EE-26-T-2396, is for the procurement of five lubricators, specifically SMC Corporation of America part number AL40-N04-3Z, under National Stock Number 4930-01-604-9418. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. The delivery is set for FOB destination to the USS Frank Cable, with a required delivery date of August 21, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination. The contract incorporates technical and quality requirements from the DLA Master List and specifies a zero percent quantity variance, meaning the exact quantity of five units must be supplied.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332996
New
DIBBS
COUPLING, PIPE
Solicitation # SPE7M3-26-T-8700
This contract is for the procurement of 211 packages of steel pipe couplings, specifically female adapter unions with 1/2 inch NPTF to NPSM external swivel pipe threads. The items must be manufactured in accordance with SAE standards for hydraulic tube fittings and TDP Rev B Gen 3 per SAE J514-3. The procurement is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M3-26-T-8700, with a required delivery date of January 26, 2027. Key requirements include adherence to DLA packaging standards, ASTM D3951, and MIL-STD-129 for marking and labeling. Quality assurance will be conducted at the destination using sampling methods consistent with MIL-STD-1916 or ASQ H1331. Additionally, the contract strictly prohibits the use of Class I ozone depleting chemicals. Delivery is set as FOB Origin and should be shipped to the DLA Distribution New Cumberland facility in Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7M4-26-T-371X
This contract is for the procurement of one helical compression spring, identified by NSN 5360010583190 and Eaton Corporation part number 90P404-S-5. The order is managed under solicitation SPE7M4-26-T-371X with a required delivery date of August 25, 2026, and a delivery timeframe of 20 days. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination in Silverdale, Washington. The agreement mandates strict adherence to DLA packaging requirements (RP001) and marking standards (MIL-STD-129). It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. The supplier must utilize the fastest traceable shipping means and is explicitly forbidden from using parcel post for delivery.
Spring Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-371Y
This contract is for the procurement of one air duct hose, identified by NSN 4720016448193, for the Department of Defense Fluid Handling Division. The item must adhere to technical specifications MIL-PRF-32107 and MIL-PRF-32107/18. Delivery is required within 20 days after the order, with the destination and inspection point set as the USS ZUMWALT DDG 1000. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. The shipment is designated as a vessel shipment and must be sent via the fastest traceable means, specifically prohibiting the use of parcel post. The required delivery date is August 25, 2026, and the contract is managed under solicitation number SPE7M4-26-T-371Y.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 114119
New
DIBBS
ACCESSORY KIT, BOAT
Solicitation # SPE7M4-26-T-372B
This contract, identified as solicitation SPE7M4-26-T-372B, is for the procurement of one boat accessory kit, part number EB3620037 from Wing Inflatables Inc, under NSN 2090-01-717-0212. The order is managed by the Department of Defense Fluid Handling Division with a required delivery date of August 25, 2026, and a delivery window of 10 days after the order is placed. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination. It must be delivered to the Distribution Management Office at Camp Lejeune, North Carolina, using the fastest traceable means, specifically excluding parcel post. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory, along with adherence to hazardous communication and government identification removal standards.
Other Marine Fishing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326122
New
DIBBS
FITTING, LUBRICATION
Solicitation # SPE7M3-26-T-8698
This contract is a solicitation from the Department of Defense Fluid Handling Division for the procurement of one lubrication fitting, identified by NSN 4730-01-701-7953 and Lebus International part number 3560. The delivery is required within 20 days after order, with an original required delivery date of August 25, 2026. The shipment is designated for the USNS Sojourner Truth T-AO 210 in San Diego, California, and must be sent via traceable means rather than parcel post. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. Inspection and acceptance will take place at the destination, and the terms are set as FOB Origin with no allowable quantity variance.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 114119
New
DIBBS
PADDLE, BOAT
Solicitation # SPE7M4-26-T-371W
This contract is for the procurement of eight boat paddles, identified as commercial off the shelf items from Wing Inflatables Inc with part number E2200005 and NSN 2040017170182. The order is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-371W, with a required delivery date of August 25, 2026, and a delivery window of 10 days after order. The items are to be delivered FOB Origin with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and DLA packaging requirements, with marking and labeling following MIL-STD-129. Shipments are directed to the Distribution Management Office at Camp Leune, North Carolina, and must be sent via the fastest traceable means, specifically avoiding parcel post.
Other Marine Fishing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
VALVE, CHECK, AIRCRAF
Solicitation # SPE7M4-26-T-321M
This contract is for the procurement of five aircraft check valves, identified by NSN 4820015736314 and Eaton Aerospace part number 731660. The order is managed under solicitation SPE7M4-26-T-321M for the Department of Defense Fluid Handling Division. Delivery is required within 168 days, with a required delivery date of January 5, 2027, and a final ship date of February 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. As a critical application item, the contract specifies that any non-accepted supplies must have government identification removed per requirement RQ011. All technical and quality requirements are governed by the DLA Master List.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-372F
This contract is for the procurement of 29 nonmetallic hose assemblies, identified by NSN 4720-01-226-4830 and part number 83-14722-02. The items must adhere to basic drawing 81996 83-14722 Revision G and include specific component substitutions, utilizing hose P/N EC525-12 and fitting P/N 4SA12FJ12. Delivery is required within 41 days, with a need ship date of October 20, 2026, and a final required delivery date of November 16, 2026. Shipping is FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict compliance with DLA packaging and marking requirements per MIL-STD-129 and MIL-STD-2073-1E. A non-extendable shelf life of 72 months is required, and all items must be marked with both cured and expiration dates. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval. Technical and quality requirements are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is required.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-371V
This contract is for the procurement of one nonmetallic hose assembly, identified by NSN 4720012141000 and Eaton Aeroquip part number AE706581-8. This item is designated as a critical application item. The delivery is required within 10 days of order, with a required delivery date of August 25, 2026. The shipment is to be delivered FOB Origin to the 0703 CS BN CO A Distribution at Fort Stewart, Georgia, using the fastest traceable means. The supplier must adhere to several regulatory and technical standards, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Additionally, the contract mandates compliance with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and the protection of covered defense information. All technical and quality requirements are governed by the DLA Master List.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7M4-26-T-319N
This solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-319N, is for the procurement of 50 plain encased seals, identified by NSN 5330-01-248-1224 and part number 472199 from Vickers Inc. The contract requires delivery within 168 days after order and specifies performance at Hill AFB. The items must adhere to strict material and quality standards, specifically prohibiting the use of asbestos as defined in FED-STD-313 and Class I ozone-depleting chemicals. Compliance with DLA packaging requirements and the master list of technical and quality requirements is mandatory. Any substitute chemicals used must be submitted for approval unless already authorized by the specifications.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
HOSE SET, NONMETALLIC
Solicitation # SPE7M4-26-T-371U
This contract is for the procurement of nonmetallic hose sets designed for tractor-trailer air brake systems. Each set consists of two self-coiling hose assemblies, one red and one blue, featuring a 3/8 inch inner diameter and 1/2 inch NPT male pipe fittings at each end. The total quantity requested is 248 units, divided across three delivery locations: Albany, Georgia; New Cumberland, Pennsylvania; and Tracy, California. The items are designated as critical application items with a required delivery date of March 13, 2027, and a delivery window of 167 days. Compliance with DLA technical and quality requirements is mandatory, including strict prohibitions against the use of Class I ozone-depleting chemicals. Packaging must adhere to ASTM D3951 and MIL-STD-129 standards, with shipping handled as FOB Origin and inspection and acceptance occurring at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, HOSE
Solicitation # SPE7M4-26-U-0422
This solicitation, issued by the DLA Land and Maritime Fluid Handling Division under number SPE7M4-26-U-0422, is a Request for Quotations for an indefinite-quantity, fixed-price contract to procure Hose Elbows (NSN 4730-01-576-5131). The procurement is designated as a Total Small Business Set-Aside with a maximum contract value of $350,000. While the estimated annual quantity is 34 units, the contract includes a guaranteed minimum of 5 units and a minimum delivery order quantity of 17 units. Deliveries are required within 87 days of order, under FOB Origin terms, with inspection and acceptance occurring at the destination. The contract incorporates rigorous technical, quality, and environmental standards. Specifically, Class I ozone-depleting chemicals are strictly prohibited, and all items must comply with the DLA Master List of Technical and Quality Requirements. Packaging must adhere to ASTM D3951 and RP001 for palletization, while marking and labeling must follow MIL-STD-129. Offerors must also comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and must safeguard covered defense information per DFARS requirements. Payment and receiving reports are to be processed electronically through the Wide Area Workflow (WAWF) system. Quotations must be submitted by August 26, 2026, and must not include used, reconditioned, or remanufactured items.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

in 4 days
View Details