This Combined Synopsis/Solicitation opportunity from Department Of The Treasury was posted on July 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

NTERFACE CARPET TILES MARRAKESH CLASSICS

Closed

2031ZA26Q00138Federal

Submission Closed07/29/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0017327P-1301425914

The Naval Research Laboratory intends to award a sole source purchase order to Ross Mixing, Inc. for the procurement of a VMC-10S VersaMix Multi Shaft Mixer. This action is being conducted under Simplified Acquisition Procedures in accordance with FAR Part 13.106-1(b), as the purchase does not exceed the simplified acquisition threshold of 350,000 dollars. The requirement is classified under NAICS code 333248 and Product Service Code 6640. This notice is not a request for competitive proposals, as the agency has determined that only one source can satisfy its specific requirements. However, interested parties may submit evidence of their capabilities by the response deadline of October 23, 2026, to demonstrate if competition would be advantageous to the government. The final decision to proceed with a sole source award or move to a competitive procurement remains at the sole discretion of the government.

Naval Research Laboratory

POSTED

DEADLINE

Electrically Heated Tank

Solicitation # W911S227U0049

Solicitation W911S227U0049 is a Request for Quotation issued by the US Army ATEC for the procurement of new electrically heated tanks and temperature controllers for the U.S. Army Yuma Proving Ground. The primary requirement consists of a 50-gallon electrically heated cylindrical tank with a 40-gallon working capacity, 10 kW heating, and a Type B agitator powered by a 1.5 horsepower motor, designed to heat and melt paraffin wax to 250 degrees Fahrenheit. The government accepts the STA-RW brand (Part Numbers Y50MB, C4X) or an equal product that meets the specified physical and functional characteristics. This is a Total Small Business Set-Aside, and the contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. All quotes must be submitted electronically via the PIEE solicitation module by the specified deadline, and failure to include the mandatory Attachment 1 regarding certifications and country of origin may result in a non-responsive rejection. Delivery is required on an F.O.B. destination basis to the Yuma Proving Ground in Arizona, with a preferred delivery timeframe of 30 days. Offerors providing equal products must include descriptive literature, make or model numbers, and details of any modifications. The procurement is subject to various federal regulations, including the Buy American Act and NEMA 12 enclosure standards for motor starters. Acceptance will be based on visual inspection, dimensional measurements, and manufacturing quality upon delivery.

POSTED

DEADLINE

39--WINCH POWER HOIST UNIT

Solicitation # SPE8EE-27-Q-0033

Solicitation SPE8EE-27-Q-0033 is a Request for Quotation issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of two Window Power Hoist Units (NSN 3950-99-989-1264). This is a total small business set-aside under NAICS code 333248. The required delivery date for the items is December 8, 2026, with a delivery timeframe of 176 days after the award. Delivery is designated as FOB Origin under the First Destination Transportation program, with the shipment destined for DLA Distribution in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The procurement requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific compliance with RP001 for palletization. Offerors must maintain active registration in the System for Award Management and provide a complete data package if proposing alternate products. Payment and invoicing must be processed electronically through the Wide Area Workflow system. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American and Balance of Payments program compliance, and prohibitions on certain telecommunications equipment. Quotes must be submitted electronically by the deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

IRA Purchase of Grace Instrument Technologies Automated High Pressure Porosity and Permeability System (M9180) per the attached specifications: 1. Automated High-Pressure Porosity and Permeability Sy…The Department of Energy's Office of Fossil Energy is forecasting the purchase of one Automated High Pressure Porosity and Permeability System (M9180) from Grace Instrument Technologies. This acquisition includes the delivery of the system along with three business days of professional installation and training conducted by qualified personnel at the NETL Pittsburgh Site in Pennsylvania. This procurement is designated as a small business set-aside under NAICS code 333248. Brian Halstead serves as the Small Business Program Manager for this action, which is intended to support technical operations through the integration of specialized high-pressure measurement equipment.

Office of Fossil Energy

POSTED

DEADLINE

Invitation to Quote for the Supply, Delivery, Installation and Commissioning of One (1) Collaborative Dual-Arm Robot System

Solicitation # Doc3361720736

The National University of Singapore is seeking quotations for the supply, delivery, installation, and commissioning of one collaborative dual-arm robot system under solicitation number Doc3361720736. Interested suppliers must submit their proposals electronically through the Sourcing Event portal by the deadline of October 27, 2026. All communications for clarifications must be conducted via Event Messages, and any submissions made through email or other unauthorized channels will result in disqualification. Suppliers are advised to submit their bids early to avoid technical issues and should utilize the resources available on the NUS Supplier Portal for guidance. It is critical to ensure the correct currency is selected at the time of submission, as it cannot be changed later. For system-related troubleshooting, suppliers are directed to contact Ariba support directly.

National University of Singapore

POSTED

DEADLINE

Manufacture and Supply of Grooved Headed Pins (NSN 5315-01-628-1619)This subcontract involves the manufacture and supply of 14 grooved headed pins under NSN 5315-01-628-1619 for the DLA Weapons Support ASC. The production process requires the use of CNC lathes and grinders to meet exact specifications. Completed units must be delivered FOB Origin to DLA Distribution in Cherry Point, North Carolina, with packaging adhering to ASTM D3951, MIL-STD-129, and DLA RP001 standards. To be eligible, the supplier must maintain an ISO 9001:2015 quality system and hold CMMC Level 2 certification. Additionally, the contractor must be certified under the US/Canada Joint Certification Program to ensure full compliance with ITAR and EAR regulations. The opportunity is categorized under NAICS code 333248 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BLADE, SHREDDING MACHIN

Solicitation # SPE8EN-27-T-0135

Solicitation SPE8EN-27-T-0135 is a fixed-price procurement for 22 kits of paper shredding machine blades, identified by NSN 3615-01-479-3879. The requirement is issued by the Department of Defense and is open for full and open competition, with a need ship date of April 12, 2027, and a final required delivery date of May 25, 2027. Delivery is set as FOB Origin, with the destination and inspection point located at DLA Distribution San Diego, California. The procurement adheres to technical data package Rev A Gen 1 and basic drawing 53711, while incorporating DLA master list quality requirements and specific packaging standards under MIL-STD-2073-1E and RP001. The contract emphasizes strict quality assurance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Key regulatory compliance includes the Buy American Act, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Evaluation for award may include a price preference for certified HUBZone small business concerns, and the buy is identified as a potential candidate for automated award.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

PRINTER, THREE-DIMENSIO

Solicitation # SPE8EN-27-T-0171

Solicitation SPE8EN-27-T-0171 is a fixed-price, total small business set-aside contract issued by the Defense Logistics Agency for the procurement of one three-dimensional additive manufacturing printer. The equipment, identified by NSN 3612016959151 and MakerGear part number MG2000MDS, is a portable unit weighing 170 pounds with a build volume of 16 by 14 by 13 inches. It features a 1.75mm filament diameter, supports a wide range of materials including ABS, Nylon, Carbon Fiber, and metal composites, and includes specialized lifting straps for 2 to 4 person transport. The unit operates on 100 to 120 VAC power and is governed by technical drawings 5B5M3 11B5190902. Delivery is required within 167 days, with a need ship date of April 12, 2027, and a final required delivery date of June 12, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract specifies FOB Origin terms and requires destination inspection. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Administrative compliance includes the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS regulations regarding safeguarding covered defense information, the Buy American Act, and the prohibition of certain telecommunications equipment.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Final Assembly and MIL-STD PackagingThis subcontract involves providing final integration and packaging services for prime contractors on DLA Troop Support projects. The scope of work requires the assembly of machined parts and hardware into Cable Roller Assemblies, followed by final quality inspections. The contractor is responsible for delivering eight fully assembled and marked units, ensuring all packaging and marking adhere strictly to MIL-STD-2073-1E and MIL-STD-129 standards. The project is managed under the Department of Defense with performance taking place in Silverdale, Washington. Interested parties must note the response deadline of October 26, 2026. The work falls under NAICS code 333248 and is coordinated through Construction and Equipment Manufacturing and Construction.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0136

Solicitation SPE8EE-27-T-0136 is issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of eight cable roller assemblies, identified by NSN 3950-01-573-8098. The requirement is categorized under NAICS code 333248. Delivery is required within 20 days after receipt of order, with the place of performance and delivery located in Silverdale, Washington. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and a prohibition on the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Compliance with various Federal Acquisition Regulations and Defense Federal Acquisition Regulation Supplement clauses is required, including the Buy American Act, the Berry Amendment, and safeguarding covered defense information. Offerors must submit quotations via the DIBBS portal by October 26, 2026. The award may be processed as an automated award, and the government requires representations regarding small business size status and telecommunications equipment usage.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0084

Solicitation SPE8ED-27-T-0084 is a fixed-price contract issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 39 units of Arm Shaft Belts, identified by NSN 3530-00-845-0805 and Singer Industrial Sewing Products part number 267161. The required delivery date is December 18, 2026, with a delivery timeframe of 27 days after award. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is strictly governed by MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific AQLs assigned for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. The contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Automated Fluidized Bed Mixer Facility Modernization for end use at Pine Bluff Arsenal – CSO

Solicitation # W519TC26ACSO

The Army Contracting Command - Rock Island is seeking qualified vendors for the Automated Fluidized Bed Mixer Facility Modernization at Pine Bluff Arsenal. This Commercial Solution Opportunity (CSO) aims to replace legacy systems over 25 years old with an automated, high-precision mixing, granulation, and drying system for colored smoke energetics production. The required solution must handle hygroscopic materials, such as sugar and potassium chlorate, in high-humidity environments up to 95 percent and include integrated safety features like fail-safe shutdown protocols and high-speed fire detection and suppression systems to mitigate explosion risks. The project encompasses the delivery of core mixer equipment, de-clumping and weighing sub-systems, on-site installation, and operator training. The procurement follows a streamlined three-phase selection process authorized under DFARS 212.70 and FAR Part 12, consisting of a Phase 1 Solution Brief, a Phase 2 Pitch, and a Phase 3 Full Quote. Evaluation criteria focus on technical merit, innovation, financial feasibility, and the potential impact on operational readiness. Successful candidates in Phase 3 will be invited to a site visit at Pine Bluff Arsenal before submitting a final Firm-Fixed-Price quote. The Phase 1 submission deadline is October 27, 2026, and all proposals must be unclassified and submitted electronically to the designated points of contact.

W6QK Acc-Ri

POSTED

8 days ago

DEADLINE

in 6 days

AI Contract Overview

This is a fixed-price commercial procurement solicitation for 151 units of Interface Carpet Tiles, Marrakesh Classics, under NAICS code 333248, issued by the Bureau of Engraving and Printing, Office of the Chief Procurement Officer, Department of the Treasury. The solicitation number is 2031ZA26Q00138, with a published date of July 28, 2026, and a strict response deadline of July 29, 2026, at 4:00 p.m. EDT. The contract is not a small business set-aside, despite initial misstatements in metadata, and all offers must be submitted via email to adnan.sillah@bep.gov. Quotes must be firm, fixed, and in U.S. dollars, inclusive of all shipping, handling, and delivery costs, with validity extending 60 days past the submission deadline. Delivery is required to the Bureau of Engraving and Printing – Eastern Currency Facility at 14th and C St. S.W., Washington, DC 20228, under FOB Destination terms, with acceptance performed by the government upon arrival. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is a pass/fail criterion assessed on complete product specifications, matching dye lot numbers, inclusion of brochures and supporting documentation, and compliance with Federal Acquisition Regulation clauses 52.212-1 and 52.212-2. Price is the decisive factor among technically acceptable offers. All offerors must be currently registered in SAM.gov and provide a valid UEI or CAGE code; DUNS numbers are no longer accepted. The solicitation explicitly prohibits discussions and requires all submissions to represent the offeror’s best and final quote. No options, extensions, or additional line items are included, and pricing details in the schedule are incomplete or malformed, preventing a verified contract value estimate. Packaging, marking, inspection standards beyond conformity to BEP specifications, and invoicing procedures are not specified, and no Contracting Officer’s Representative or technical representative is identified. The contract will be awarded to the lowest-priced technically acceptable offer meeting all commercial item requirements under FAR Subparts 12 and 13.

General Info

Small business set-aside for Marrakesh carpet tiles, fixed-price, SAM.gov submission, DC delivery, Treasury procurement.

Agency

Department Of The Treasury → Office Of The Chief Procurement Officer

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

Washington, DC, 20228, USA

Set-Aside

SBA

Documents

RFQ 2031ZA26Q00138 for Printing Machinery and Equipment

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 28

Combined Synopsis

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Contacts1 person available

OfficeWASHINGTON, DC, 20228, USA

Organization / AgencyDepartment Of The Treasury → Office Of The Chief Procurement Officer

Office AddressWASHINGTON, DC, 20228, USA

Contacts

ADNAN SILLAH

contact@example.gov

+1 (555) 000-0000

Full Description

This is a request for quote for the supplies listed on page 2 (Schedule). This RFQ synopsis/solicitation for commercial items is prepared in accordance with the Federal Acquisition Regulations (FAR) in Subpart 12 & 13. This is fixed price procurement under NAICS Codes: 333248 - Printing Machinery and Equipment Manufacturing.