Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

O-RING

Active
SPE7L1-26-T-905EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an O-RING with NSN 5331-01-680-0251 and part numbers 1000433217 and 2463-016238S-6503, for a quantity of nine units, under solicitation SPE7L1-26-T-905E. Delivery is required FOB origin within 213 days of contract award, with no variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must adhere strictly to MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. The item must also be marked in compliance with MIL-STD-129 with the special marking code “20–20 Do Not Bend,” and palletization must follow DLA packaging standards. Technical and quality requirements are governed by the DLA Master List, with configuration change management, cybersecurity certification at CMMC Level 2, and removal of government identification procedures also applicable. The supplier must comply with SAE AS9100 quality standards and documentation requirements for source approval, while transportation and shipping are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, in accordance with specific DLA procedural notes. The contract is subject to federal supply classifications and requires alignment with DoD unit of issue standards.

General Info

Procure nine O-rings per NSN, FOB origin, 213-day delivery, MIL-DTL-117 packaging, CMMC Level 2, DLA New Cumberland.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-905E Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
GEORGE MITCHELL
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
L3 TECHNOLOGIES, INC. 06401 P/N 1000433217 PARKER-HANNIFIN CORPORATION 18565 P/N 2463-016238S-6503
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7L1-26-T-905E
SECTION B
PR: 7017696700 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017696700 0001 EA 9.000
NSN/MATERIAL:5331016800251
DELIVERY (IN DAYS):0213
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:JB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE7L1-26-T-905E
SECTION B
PR: 7017696700 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/15/2027 Original Required Delivery Date:03/15/2027
SPE7L1-26-T-905E NSN/Part Number: 5331-01-680-0251 Quantity: 9 EA Purchase Request: 7017696700QTY: 9 Delivery: 213 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-905P
The contract pertains to the procurement of O-RINGS with NSN 5331-01-652-8142, requiring delivery of 74 units under solicitation SPE7L1-26-T-905P. The item is classified as a Type I shelf-life item with a non-extendable 60-month shelf life, subject to strict traceability and packaging requirements under DLA directives including DLAD Procurement Note C03 for supply chain documentation retention and MIL-DTL-117 Type II Class C Style 1 for opaque, waterproof, greaseproof packaging to protect against UV degradation. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special code 32 indicating Type I shelf life, and palletization must follow DLA Packaging Requirements for Procurement. Delivery is FOB origin with no quantity variance, inspection and acceptance occur at destination, and shipment must be completed within 103 days by November 25, 2026. The item is designated as non-surplus acceptable, and all technical and quality standards referenced, including those identified by R and I numbers, are governed by the DLA Master List. Transportation logistics adhere to DLAD Procurement Notes C19 and C20, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by DoD unit of issue standards and incorporates applicable defense information handling requirements under RD003.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-903Q
This contract is for the procurement of one O-RING with NSN 5331-01-670-1894 under solicitation SPE7L1-26-T-903Q, with a response deadline of August 13, 2026, and a required delivery within five days of award. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Documentation for source approval must meet RC001 criteria, and the contract prohibits the use of Class I ozone-depleting chemicals entirely, overriding any conflicting specification requirements while still enforcing product performance standards; alternative chemicals require prior approval. The item must also be completely free of asbestos, with any prior asbestos-containing codes or parts deemed unacceptable, and substitutions must undergo approval per Clause L30 and Provision 4 conditions. Covered defense information protections apply, and performance is to occur in Johnston, Iowa, with Kristina Derry at DLA as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
VALVE, AIR SHUTDOWN
Solicitation # SPE7MC-26-T-163U
The contract is for the procurement of four air shutdown valves with NSN 4820-15-011-3048 and part number 057.08007-REV 3.0 from ISOTTA FRASCHINI MOTORI SPA, supplied under solicitation SPE7MC-26-T-163U. The valves must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which is incorporated by reference and controlled by the revision in effect on the solicitation issue date. Delivery is required FOB origin within 158 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containment codes, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must follow DLA packaging standards, and the delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The purchase price is $4.00 per unit, totaling $16.00 for the four units. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the contract falls under NAICS code 336310 for aerospace product and parts manufacturing. The point of contact is Paula Mcclary, reachable via email and phone.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-903F
The contract pertains to the procurement of one O-ring identified by NSN 5331-99-549-5804 and part number 2301/1006 from J.C. BAMFORD EXCAVATORS LIMITED, under solicitation SPE7L1-26-T-903F. The item must be delivered in five days FOB origin with no quantity variance allowed and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, requiring a medium-duty, waterproof, greaseproof, opaque bag to protect against UV degradation, and labeling must adhere to MIL-STD-129 without special marking. Packaging and preparation follow MIL-STD-2073-1E with specific preservation methods, and palletization aligns with DLA’s standard requirements. The delivery destination is W50EA0 at 201 SCHAFER DRIVE, RONKONKOMA NY 11779-7353, with shipment required via traceable means excluding parcel post. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition type. Documentation for source approval and handling of covered defense information also applies, and all units are issued per DoD standards with a single unit price of one dollar, totaling one dollar for the order. The contract is issued by the Department of Defense’s Land Supply Chain with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE4A5-26-T-319F
RTX CORPORATION is contracted to supply four units of CAP, FILLER OPENING with NSN 2910-01-732-8686 under solicitation SPE4A5-26-T-319F, with a total price of $4.000 per unit and no variance allowed in quantity. Delivery is required within 20 days from the contract date, with FOB ORIGIN terms, meaning the buyer assumes responsibility for freight and risk once the item leaves the supplier’s facility. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and container standards. Marking follows MIL-STD-129 with no special codes, and palletization adheres to DLA’s RP001 requirements. The delivery destination is Assault Craft Unit 4 at 2155 11th Street, Virginia Beach, VA, with RDD 777 and a mandatory requirement to ship via the fastest traceable means, expressly prohibiting parcel post. The original required delivery date is July 10, 2026, and the contracting office is the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with Koonj Spicer listed as the primary point of contact. The contract is classified under NAICS code 336310 and remains for government use only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L1-26-T-904S
The contract requires the contractor to perform Production Lot Testing for NSN 0001S00000062, with a total quantity of 1,162 units, under solicitation SPE7L1-26-T-904S, with a response deadline of August 13, 2026, and a delivery timeline of 174 days after contract award. The test report must be labeled with the contract number and lot/item number as specified, and must be presented to the Quality Assurance Representative for review. All shipments of Production Lot Test Reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving documentation, a copy of the contract or order, all applicable test reports showing actual results and approved tolerances, material and process certifications, operation and inspection method sheets, and the manufacturing drawings used for the test sample, with appropriate markings to control public disclosure and limit government use as necessary. The work is performed under a federal procurement managed by the Department of Defense, Land Supply Chain, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Chelsea Cunningham, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
Supply of 5KW Service Kits (NSN: 2940016273978)The contract specifies the manufacture and delivery of two 5KW service kits identified by NSN 2940016273978, intended for military use under the oversight of the Defense Logistics Agency, a component of the Department of Defense. The kits must comply with DPAS regulations and are designated for expedited handling to meet urgent operational requirements. The work falls under NAICS code 336310, classifying it within the aerospace product and parts manufacturing sector, and is structured as a subcontract, indicating it supports a larger procurement initiative. Although the solicitation number and specific point of contact are not provided, the performance location and recipient details remain unspecified, with the delivery and execution managed through the DLA’s procurement system. The contract was posted on August 1, 2026, and the details are accessible via the DIBBS portal for tracking and fulfillment purposes.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Supplier for Other Contracted NSNs (Bulk Opportunity)The contract pertains to the supply of additional National Stock Numbers encompassing engine components, gaskets, filters, and fluid systems within a broad scope of 9,304 items, aimed at supporting logistical needs under a subcontract arrangement. It is issued by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 336310 which corresponds to aerospace product and parts manufacturing, indicating the specialized nature of the supplied items. The solicitation is posted for future performance with no set-aside designation, and while the specific place of performance and point of contact are not detailed, the contract is accessible through the DIBBS system via a unique identifier linked to the award and delivery details. The opportunity is open for suppliers to fulfill bulk procurement requirements for critical maintenance and operational support parts, ensuring readiness and availability across military systems. Although the solicitation number is not provided, the contract reference and award details are traceable through the official DIBBS portal, allowing qualified vendors to engage with the procurement process in preparation for the August 2026 posting date. The absence of geographic or organizational set-asides suggests a competitive, open bidding environment targeting capable manufacturers and distributors with the capacity to deliver large volumes of standardized military-grade components reliably and on schedule.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Diesel Engine Supply and NSN FulfillmentThe contract involves the supply of diesel engines and related components under National Stock Numbers to fulfill military requirements, encompassing full production, rigorous testing, proper packaging, and timely delivery in strict adherence to Department of Defense specifications. The work is governed under NAICS code 336310 and executed as a subcontract under the Defense Logistics Agency, ensuring alignment with military standards for performance, reliability, and interoperability across defense systems. All deliverables must be fully compliant with prescribed military specifications, with quality assurance embedded throughout the manufacturing and inspection processes. The contract does not specify a set-aside type or a designated point of contact, and performance is expected to occur within the operational framework of the Department of Defense, without a defined geographic delivery location. The procurement is managed through the DLA’s systems, with the award linked to a specific contract and delivery identifier for traceability and accountability.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Engine Component & Spare Parts Manufacturing
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-823H
This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, FUEL
Solicitation # SPE7L2-26-Q-0009
The contract pertains to the procurement of a Fuel Injector Assembly identified by NSN 2910-01-727-8637 and part number 55510920, supplied by GM Defense LLC under solicitation SPE7L2-26-Q-0009. The item is classified as a Commercial Off the Shelf (COTS) product with no shelf life requirement, and the contract mandates strict compliance with DLA’s technical and quality standards as outlined in the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is completely prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be submitted for approval unless explicitly authorized. The product must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code, with palletization following DLA Packaging Requirements. The contract specifies a Firm Fixed Price term with no variance allowance, requiring delivery of exactly three units within 90 days after award. Inspection and acceptance occur at the destination, with FOB origin terms applying. Delivery is to the DLA Distribution facility in New Cumberland, PA, and transportation procedures must adhere to DLAD Proc Notes C19 and C20. Pricing is structured in quantity tiers with applicable prices for ranges of 4–5, 6–10, and 11–15 units, though actual order quantity is fixed at three units. The material need date is October 1, 2026, and the solicitation response deadline was August 7, 2026. The NAICS code is 336310, and the primary point of contact is Shaun Sehgal of the Department of Defense, Land Supplier Opns Wheeled Vehicles.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 313310
New
DIBBS
Supplier of Specialty Materials (Non-Hazardous)The contract is a small business set-aside solicitation for the supply of durable fabrics, foams, fasteners, and other non-hazardous components required for seat cover manufacturing, all of which must meet stringent technical and environmental standards established by the Defense Logistics Agency. Materials must comply with federal regulations and be suitable for defense-grade applications, ensuring durability, safety, and long-term performance under demanding conditions. The procurement is structured as a subcontract under the Small Business Administration’s Total Small Business Set-Aside program, exclusively available to businesses certified as small under NAICS code 313310, which covers textile mill products manufacturing. The solicitation was posted on August 2, 2026, with responses due by August 17, 2026, and is managed by the Land Supply Chain branch of the Department of Defense. While specific delivery locations and contracting office details are not provided, performance is expected to support defense-related seat cover production across multiple operational environments. All suppliers must demonstrate full compliance with environmental and material specifications, as non-conforming goods will be rejected. Interested parties must submit proposals through the official DIBBS portal, and selection will prioritize small businesses capable of delivering high-quality, standards-compliant components on schedule.
Textile and Fabric Finishing Mills

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and assessment of NIST SP 800-171 cybersecurity controls to safeguard covered defense information, ensuring compliance with federal requirements for protecting sensitive data across the defense supply chain. This includes full adherence to all specified security controls, ongoing monitoring, documentation of control effectiveness, and submission of System for Award Management SPRS scores to demonstrate compliance status. The contractor must also establish and maintain a robust cyber incident response capability, including timely detection, reporting, and remediation of any cybersecurity events impacting covered defense information. This is a total small business set-aside subcontract under NAICS code 541512, assigned by the Department of Defense’s Land Supply Chain organization, and is intended exclusively for small businesses as defined by the SBA. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026. Performance is expected to support federal defense information systems, with no specific location designated for place of performance. All work must align with NIST standards and the broader cybersecurity expectations of the Department of Defense, and failure to meet compliance requirements may result in contract termination or penalties.
Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract pertains to regulatory compliance for hazardous materials used in production, requiring full adherence to OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This includes accurate labeling of hazardous chemicals in accordance with HCS guidelines, generation of up-to-date Safety Data Sheets for all regulated substances, and timely submission of exemption reports as mandated by federal regulations. The work involves ensuring that all documentation and labeling practices meet the latest federal standards to support safe handling, storage, and usage of hazardous materials within the production environment. This is a small business set-aside subcontract under NAICS code 541620, issued by the Department of Defense through the LAND SUPPLY CHAIN agency. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026. The contract is exclusively available to small businesses as defined by the SBA, and performance is expected to support defense production activities under the jurisdiction of the Department of Defense. All deliverables must align with federal occupational safety regulations and must be completed within the specified timeframe to maintain compliance across the supply chain.
Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 493190
New
DIBBS
Packaging and Palletization ServicesThe contract calls for comprehensive packaging and palletization services to support Department of Defense logistics operations, specifically requiring government-compliant methods including unit wrapping, proper palletization, and adherence to MIL-STD-129 labeling standards with barcodes for all shipments to the Defense Logistics Agency. All work must meet stringent military packaging requirements to ensure durability, traceability, and seamless integration into the DLA supply chain. The solicitation is exclusively set aside for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 493190, indicating a focus on warehousing and storage services. Proposals must be submitted by the response deadline of August 17, 2026, and performance is expected to align with federal defense logistics protocols, though the specific place of performance is not detailed in the provided information.
Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 315990
New
DIBBS
Manufacturing of Vehicular Seat CoversThe contract entails the full production of approximately 60 vehicular seat covers identified by NSN 2540-01-578-0812, covering all manufacturing stages including cutting, sewing, and rigorous quality control to meet military-grade durability and material specifications. The work must comply with all applicable Department of Defense standards, ensuring the final products are fit for military use under demanding operational conditions. This is a Small Business Set-Aside subcontract under NAICS code 315990, restricted exclusively to small businesses as defined by the SBA, and was posted on August 2, 2026, with a response deadline of August 17, 2026. The solicitation is managed by the Land Supply Chain under the Department of Defense, and while specific performance location and point of contact details are not provided, the contract is accessible through the DIBBS system via the given UI link.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE7L1-26-T-905A
The contract pertains to the procurement of two straight-headed pins with NSN 5315-01-648-4914 under solicitation SPE7L1-26-T-905A, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within five days of award, with performance located in Barstow, California, 92311-5015. The item is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contract incorporates mandatory compliance with export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or export of technical data to foreign persons anywhere in the world. Contractors must hold an approved US/Canada Joint Certification Program certification, complete DLA-mandated training on handling export-controlled data, and pass the DLA Export-Controlled Technical Data Questionnaire to access such information. The solicitation requires CMMC Level 2 certification for any third-party assessment organization involved, and all responses must be submitted by August 13, 2026. Point of contact is Kristina Derry, with the solicitation available via the DIBBS portal and governed by DFARS 252.225-7048 for export controls.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-904V
The contract pertains to a single gasket item identified by NSN 5330-01-165-1362 with a quantity of one unit, subject to delivery within five days of award. All supplies must be free of asbestos, and any substitutions must comply with Clause L30 and Provision 4 conditions. The item must be marked in accordance with MIL-STD-130N dated November 16, 2012, for identification of U.S. military property, and government identification must be removed from any non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and packaging must meet DLA procurement standards. The solicitation number is SPE7L1-26-T-904V, issued on August 2, 2026, with responses due by August 13, 2026. The place of performance is Beaufort, South Carolina, 29904-6120, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 339991. Primary point of contact is Kristina Derry, reachable via email and phone provided.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
AIR CLEANER, INTAKE
Solicitation # SPE7L1-26-T-904M
The contract is for the procurement of six air cleaner intake units with part number 981-1.5-08-V-44-50-V and NSN 2940017247554, issued under solicitation SPE7L1-26-T-904M by the Department of Defense’s Land Supply Chain. Delivery is required within 133 days from contract award, with FOB origin terms and no quantity variance allowed. The items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and unit containment, with no special marking required. Palletization must adhere to DLA Packaging Requirements, and all items must be free of Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitute chemicals are pre-approved. The contract is a total small business set-aside under NAICS code 333618, with a unit price of $6.00 per unit and a total contract value of $36.00. The required delivery date is December 25, 2026, and all transportation logistics must follow DLA Procurement Notes C19 and C20.
Other Engine Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LATCH SET, RIM
Solicitation # SPE7L1-26-T-902K
The contract is for the supply of a LATCH SET, RIM with NSN 5340-01-695-7631 and part number E3-129-025, totaling eight units to be delivered within five days of award under solicitation SPE7L1-26-T-902K. Delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129, with no special marking required. The product must be shipped in accordance with DLA packaging requirements and palletization standards. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or instrument sensors, in which case they must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, and all specifications are governed by the revision in effect at the solicitation or award date depending on acquisition size. The delivery address is a U.S. military postal facility in FPO AP 96306-0001, while the shipping origin is a Japanese military supply location. The unit price is $8.00, resulting in a total contract value of $64.00. The required delivery date is July 30, 2026, and government use identifiers, including IPD, DIC, and FC codes, are provided for internal tracking. The official point of contact is Michael Nordahl, reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L1-26-U-0535
The contract solicitation SPE7L1-26-U-0535 seeks the procurement of nonmetallic round section seals under an indefinite-delivery contract (IDC) with a guaranteed minimum and a maximum value of $350,000. The quantity of 426 units is estimated and not guaranteed; actual purchases depend on individual delivery orders issued under the contract. The item, identified by NSN 5330-01-466-8565, must be delivered FOB origin within 97 days and is subject to strict packaging, preservation, and marking requirements in accordance with MIL-STD-2073-1E, MIL-DTL-117 Type II Class C Style 1, and MIL-STD-129. Packaging for UV-sensitive materials must be medium duty, waterproof, greaseproof, and opaque to prevent degradation, and all shipments must be palletized per DLA’s RP001 standards. Asbestos is strictly prohibited, and mercury or mercury-containing compounds are banned from direct contact with the hardware unless exempted for specific functions such as batteries, fluorescent lamps, sensors, or instruments, in which case a second containment boundary meeting NAVSEA 5100-003D is mandatory. Hazardous materials must be labeled and shipped according to IP025 and 29 CFR 1910.1200, with Safety Data Sheets required. All deliverables are subject to destination inspection and acceptance by the government, with payment processed exclusively through WAWF. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity, including NIST SP 800-171 compliance, safeguarding of covered defense information, cyber incident reporting, and prohibitions on telecommunications equipment from designated foreign entities. It also includes requirements to prevent trafficking in persons, ensure employment eligibility verification, promote sustainable products, and prohibit hexavalent chromium and toxic material disposal. The solicitation is set aside exclusively for Women-Owned Small Businesses, and offerors must provide accurate UEI and CAGE codes, represent their socioeconomic status, and disclose any joint venture arrangements. Transportation must use U.S.-flag vessels unless a waiver is granted, and all shipments require proper documentation including vessel identification. No contract award has been made, and the solicitation closes on August 17, 2026, with proposals submitted via DLA’s electronic systems and addressed to the specified Columbus, Ohio postal address.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-U-0532
The contract under solicitation SPE7L1-26-U-0532 is a Small Business Set-Aside issued by the Defense Logistics Agency’s Land Supply Chain for the procurement of 29 helical compression springs, identified by NSN 5360014252997, with a guaranteed minimum of 4 units and an estimated annual quantity of 29 units. It is structured as an Indefinite Delivery Contract with a maximum value of $350,000.00, allowing for multiple orders over a one-year period, though no unit pricing is provided, making the base value indeterminate. Delivery is required within 104 days from the date of order issuance under FOB Origin terms, with inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent packaging and marking standards including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, including barcoding and IUID requirements. No cushioning, wrapping, or preservation materials are required, but items must be clean and dry prior to packaging. Mercury and mercury-containing compounds are strictly prohibited unless used in exempted functional applications such as batteries, instruments, or weapon systems, in which case they must meet NAVSEA 5100-003D containment standards. The contract includes comprehensive Federal Acquisition Regulation clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable procurement, hazardous material handling, cybersecurity requirements including NIST SP 800-171, electronic invoicing through WAWF, and prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Chinese military companies. Offerors must be registered in SAM.gov, provide a valid UEI and CAGE code, and complete socioeconomic representations confirming small business status, with affirmative responses triggering additional disclosures for joint ventures. All submissions must be delivered electronically via DIBBS or WAWF by the deadline of August 17, 2026, and must include required representations under FAR clauses including 52.219-28 and 52.222-50. The solicitation evaluates proposals based on price and other factors without specifying weights or using LPTA, and the award will go to the most advantageous offeror. Special requirements include prior submission of Safety Data Sheets for hazardous materials and compliance with all applicable technical and quality standards referenced in the DLA Master List
Spring Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details