Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

O-RING

Active
SPE7M4-26-T-345RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of 103 preformed packing o-rings, identified as part number MS9967-215 and NSN 5331-00-414-2757. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the SAE AS9967B standard. The contract strictly prohibits the use of asbestos and specifies a non-extendable shelf life of 240 months. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with zero non-conformances allowed for acceptance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, specifically requiring opaque, waterproof, and greaseproof bags to protect the items from ultraviolet rays. Delivery is set for 167 days after order, with the final destination and inspection point located at the DLA Distribution Depot Oklahoma at Tinker AFB.

General Info

Procurement of 103 asbestos-free packing o-rings delivered to Tinker AFB within 167 days.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE7M4-26-T-345R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
O-RING
O-RING,PACKING PREFORMED
FULL AND OPEN COMPETITION APPLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
SPE7M4-26-T-345R
SECTION B
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
RS045: Shelf-life requirement RS001 for a TYPE I (CODE Z) item with a shelf life of 240 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS9967B REVISION NR B DTD 06/01/2022 PART PIECE NUMBER: MS9967-215
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017912928 0001 EA 103.000
NSN/MATERIAL:5331004142757
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:HB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:20 -20 Do not bend
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
MARK IAW PRESERVATION SPECIFICATION
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
SPE7M4-26-T-345R
SECTION B
PR: 7017912928 PRLI: 0001 CONT’D
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN
MILITARY SALES (FMS) AND STOCK SHIPMENTS.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/12/2027 Original Required Delivery Date:02/09/2027
SPE7M4-26-T-345R NSN/Part Number: 5331-00-414-2757 Quantity: 103 EA Purchase Request: 7017912928QTY: 103 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
Federal
PUMP,FUEL,METERING
Solicitation # N0010426QXC04
This solicitation, issued by the Navsup Weapon Systems Support Mech under Emergency Acquisition Flexibilities, is for the procurement of a fuel metering pump. The requirement is designated as high priority, requiring an expedited response and a firm-fixed price proposal. The award will be issued bilaterally and is restricted to authorized sources; distributors must provide official OEM authorization to be considered. Key technical and administrative requirements include adherence to MIL-STD packaging and marking standards, Government Source Inspection, and IUID compliance. All freight is FOB Origin. Proposals must include detailed pricing, procurement lead times, and a minimum quote expiration of 90 days. The contract specifies strict quality assurance protocols and a structured process for managing design or part number changes.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
Diesel Engine Parts Kit SupplyThis subcontract opportunity involves the supply of fully assembled diesel engine parts kits for the Department of Defense, specifically under the Land Supplier Opns Engines agency. The contractor is responsible for providing all necessary components, packaging, labeling, and documentation in strict accordance with military specifications and DLA requirements. The project is categorized under NAICS code 336310 and will be performed in Tracy, California. Interested parties must submit their responses by the deadline of August 27, 2026, following the posting date of August 16, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Supply of Engine Starter (Commercial Off-The-Shelf Item)This subcontract is a firm-fixed-price agreement for the supply of two commercial off-the-shelf engine starters, identified by NSN 2920000600056. The contract is managed by the Department of Defense under the Land Supplier Opns Engines agency and falls under NAICS code 336310. The items are to be delivered to DLA Distribution in New Cumberland, Pennsylvania. The solicitation was posted on August 16, 2026, with a response deadline set for August 27, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Oil Filter Manufacturing and SupplyThis subcontract, issued by the Department of Defense ASC Supplier Oper AE and AF Div, requires the manufacture, testing, and delivery of 42 military-spec oil filters under NSN 2945010030932. The project is designated as a Total Small Business Set-Aside under NAICS code 336310 and will be performed at Tinker AFB. The contractor must adhere to Critical Safety Item and source-controlled requirements, ensuring full traceability and strict compliance with hazardous materials and labeling standards. Interested parties must respond by August 24, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
Supply of Front Axle Beams (NSN 1740011659237)This subcontract involves the manufacture and supply of 44 front axle beams under NSN 1740011659237 for the Department of Defense. The contractor is responsible for ensuring all units meet specific military standards for durability, packaging, and labeling. The scope of work is limited to delivery only, as no installation services are required. The project falls under NAICS code 336310 and is managed by the Construction & Equipment Manu & Con agency. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by the deadline of August 27, 2026, following the posting date of August 16, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7L5-26-T-5024
This contract is a solicitation for the procurement of 15 electric engine starters, identified by NSN 2920016838004 and General Dynamics Land Systems Canada part number R0175274. The requirement is managed by the Department of Defense under the agency Land Supplier Opns Engines, with a delivery timeline of 95 days after order. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The order must adhere to specific technical and quality standards, including DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. All items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The original required delivery date is set for June 10, 2027, with a need ship date of December 1, 2026.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7L5-26-T-5003
This contract, identified as SPE7L5-26-T-5003, is a solicitation by the Department of Defense Land Supplier Operations Engines for the procurement of two electric engine starters. The items are specified as Honeywell International Inc. part number 372697-15 and National Stock Number 2920-00-060-0056. The delivery is required within 158 days after the order, with a need ship date of February 2, 2027, and an original required delivery date of January 27, 2027. The contract stipulates that shipping is FOB Origin, with inspection and acceptance occurring at the destination. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. Additionally, the contract incorporates technical and quality requirements RA001 and RQ011, specifically regarding the removal of government identification from non-accepted supplies.
LAND SUPPLIER OPNS ENGINES

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
INDICATOR, POSITION,
Solicitation # SPE7MC-26-T-197Q
This contract, solicitation number SPE7MC-26-T-197Q, is for the procurement of 20 units of a mechanical dial valve position indicator, identified by NSN 4820012571542. The items are critical application components associated with Flowserve Corp part numbers 01-467-0026-4 and 11301-051. Delivery is required within 158 days, with a specified need ship date of October 29, 2024, and an original required delivery date of December 11, 2024. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional uses such as batteries or sensors as specified by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and inspection and acceptance will occur at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
ELEMENT ASSEMBLY, VA
Solicitation # SPE4A6-26-T-17ZV
This contract is for the procurement of four element assembly valves, identified by NSN 4820011007495 and Honeywell part number 3315271-2. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania within 171 days. Shipping is FOB Origin, and the contract specifies a zero percent quantity variance. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance involves inspection and acceptance at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional use of mercury or Class I ozone-depleting chemicals in the hardware.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE AND CELL ASSE
Solicitation # SPE7M1-26-T-283F
This contract, identified as SPE7M1-26-T-283F, is a solicitation from the Department of Defense Maritime Supply Chain for one Valve and Cell Assembly, specifically part numbers IC/CN8 or IC/CN8-N2 from Marine Electric Systems Inc. The item is designated as a critical application item with NSN 4820015281985. Delivery is required within five days of order, with the final destination being the USS Abraham Lincoln CVN 72. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Environmental restrictions are in place, prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals unless specifically authorized. All inspection and acceptance will occur at the destination, and the original required delivery date is set for August 10, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
VALVE, RELIEF, PRESSU
Solicitation # SPE7M0-26-T-042V
This solicitation is for the procurement of two pressure relief valves with a set pressure of 3450, identified by NSN 4820-01-477-3433. The contract is issued by the Department of Defense Maritime Supply Chain ESOC Buys and is designated as a total small business set-aside under NAICS code 336310. Delivery is required within five days after receipt of order, with the place of performance located in Portsmouth. The supplier must adhere to strict material and packaging standards, including DLA packaging requirements and the removal of government identification from any non-accepted supplies. The hardware must be free of asbestos and cannot contain intentionally added mercury or mercury-containing compounds, except for specific functional exceptions approved by NAVSEA. Technical and quality requirements are governed by the DLA Master List as specified in the solicitation documents.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
SENSOR, MANIFOLD ABS
Solicitation # SPE7M0-26-T-043R
Solicitation SPE7M0-26-T-043R, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of two absolute pressure manifold sensors (NSN 2990-01-633-8804). The requirement specifies parts from Setra Systems, Inc. (P/N MBS1250-2015-C1CAC04) or Bauer Compressors, Inc. (P/N SEN-0050). The original required delivery date is August 17, 2026, with a delivery schedule of five days after receipt of order. Shipping is FOB Origin, with the primary freight destination located at Navshipyd & IMF Det Guam in Santa Rita, Guam. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129, ASTM D3951, and RP001. Inspection and acceptance will occur at the destination. Payment must be processed electronically via Wide Area WorkFlow (WAWF). Key regulatory requirements include DFARS cybersecurity standards for safeguarding covered defense information and specific labeling protocols for hazardous or radioactive materials. The solicitation is managed through the DLA Internet Bid Board System (DIBBS) with a response deadline of August 27, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 334511
New
DIBBS
SHAFT ASSEMBLY, INDI
Solicitation # SPE7M4-26-T-345J
Solicitation SPE7M4-26-T-345J, issued by the Department of Defense DLA Land and Maritime Fluid Handling Division, is for the procurement of four shaft assemblies (NSN 6610010472394) for delivery to Hill Air Force Base, Utah. The contract specifies a need ship date of February 12, 2027, with a final required delivery date of April 24, 2027, or 167 days after the date of award. The total estimated value is 16.00 dollars, based on a unit price of 4.00 dollars. Delivery is FOB Destination, with both inspection and acceptance occurring at the destination point. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Quality assurance sampling shall follow MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Key regulatory requirements include a CMMC Level 2 self-assessment for cybersecurity, compliance with NIST SP 800-171, and adherence to OSHA hazard communication standards for labeling. Invoicing must be processed electronically through the Wide Area WorkFlow system.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-345M
This contract is for the procurement of 232 gaskets with an inner diameter of 8.625 inches, an outer diameter of 9.000 inches, and a cross-sectional thickness of 0.187 inches. The items must be manufactured according to current part standards, including ASTM D2000-18 and MIL-STD-129R, and are designated as critical application items. The contract strictly prohibits the use of asbestos and Class I ozone-depleting chemicals. The gaskets are subject to a non-extendable shelf life of 36 months and must be packaged in medium duty, waterproof, greaseproof, opaque bags to prevent ultraviolet degradation. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and marking must comply with MIL-STD-130N and MIL-STD-129. Delivery is set for 167 days after order, with the final destination being DLA Distribution San Joaquin in Tracy, California.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, STRAIN RELI
Solicitation # SPE7M4-26-T-345T
This contract is for the procurement of three strain relief adapters, identified by NSN 1680-01-485-5695 and Cooper Interconnect part number 885-1580-001. The order is issued by the Department of Defense Fluid Handling Division under solicitation SPE7M4-26-T-345T. Delivery is required within 157 days, with a need ship date of February 2, 2027, and an original required delivery date of March 31, 2029. The items are to be delivered FOB Origin and shipped to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Compliance with the DLA Master List of Technical and Quality Requirements is required, along with adherence to CMMC Level 2 self-assessment and covered defense information protocols. Inspection and acceptance will take place at the destination, and there is a zero percent quantity variance allowed for this order.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING ASSEMBLY, T
Solicitation # SPE7M3-26-T-8290
Solicitation SPE7M3-26-T-8290 is a Women-Owned Small Business set-aside issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 455 units of flexible tube coupling assemblies, identified by NSN 4730003111156 and part number AS5352-24D. The items must conform to SAE AS5356B Revision B and are designated as critical application items. The contract specifies a need ship date of February 6, 2027, with an original required delivery date of July 22, 2027. Delivery and acceptance are set for destination at DLA Distribution Warner Robins, Georgia. The contractor must adhere to strict quality and environmental standards, including the prohibition of Class I ozone-depleting chemicals and compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special marking code ZZ requires each unit package to be labeled with the NSN, contract number, lot number, and CAGE codes. All invoicing must be processed electronically through Wide Area WorkFlow. Because this is a critical item, any major or minor waiver or deviation requests must be forwarded to the DSCC Contracting Officer for engineering review and approval.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SPACER
Solicitation # SPE7M4-26-T-345U
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of two spacers, identified by NSN 5365012310425 and Eaton Aerospace part number 822719. The order is designated under solicitation number SPE7M4-26-T-345U and requires delivery to the Mid Atlantic Regional Maintenance Center in Norfolk, Virginia, within 20 days. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. It explicitly prohibits the use of Class I ozone-depleting chemicals in the delivered items. Shipping must be handled via the fastest traceable means, specifically excluding parcel post, with the original required delivery date set for August 11, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-Q-0968
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of 20 metal tube assemblies under part number 4710-01-117-6398. The contract is designated as a total small business set-aside with a required delivery timeframe of 380 days after receipt of order. Compliance requirements are stringent, requiring CMMC Level 2 certification from a C3PAO and adherence to specific DLA packaging standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the necessary technical data.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
TEE, PIPE
Solicitation # SPE7M3-26-T-8291
This contract, identified as SPE7M3-26-T-8291, is for the procurement of two copper alloy pipe tees with 1/8 inch NPT threads. The items are designated as critical application components for diesel engine assemblies, specifically compatible with Onan model DJBMA and Cummins Power Generation part numbers 502-0242 and 502A242. The order is managed by the Department of Defense Fluid Handling Division under NSN 4730-00-165-0967. Key requirements include strict adherence to DLA packaging and quality standards, specifically RP001 and RA001, and a prohibition on the intentional addition of mercury or mercury-containing compounds. Delivery is required within 20 days, with FOB and inspection points set at the origin. The final destination for the supplies is the Ordnance Readiness Development Center in Nantou County, Taiwan.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
CABLE, SPECIAL
Solicitation # SPE7M4-26-T-345N
This contract, identified as SPE7M4-26-T-345N, is a solicitation from the Department of Defense Fluid Handling Division for the procurement of 20 units of special cable, part number 9D02931-1 by Curtiss-Wright Flow Control Service. The items are identified by NSN 1710-01-660-5625 and must be delivered within 20 days of the order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific prohibitions against the use of Class I ozone-depleting chemicals and requires compliance with Cybersecurity Maturity Model Certification Level 2 and Covered Defense Information standards. Shipping is coordinated through DF Young to the Signal Supply Depot in Egypt, with a required delivery date of August 17, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-345S
This solicitation, numbered SPE7M4-26-T-345S, is issued by the Department of Defense Fluid Handling Division for the procurement of 51 nonmetallic hose assemblies under NSN 4720-01-102-6073. The contract requires delivery within 80 days after receipt of order and specifies that the items must adhere to a source-controlled drawing, meaning only approved sources listed on the drawing are eligible to provide the parts. The agreement includes strict compliance with DLA technical and quality requirements, including specific packaging, bare item marking, and inspection at origin. Contractors must meet Cybersecurity Maturity Model Certification Level 2 standards and adhere to export control regulations under ITAR or EAR, which may require US/Canada Joint Certification Program approval. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336611
New
DIBBS
BELT, FLAT
Solicitation # SPE7M4-26-T-345L
This contract is for the procurement of five flat belts, identified by NSN 3030-01-433-9038 and part number ND8949 from Oil States Industries, Inc. The items are designated as critical application items with a non-extendable shelf life of 84 months. Delivery is required within 157 days, with a need ship date of February 2, 2027, and a final required delivery date of February 13, 2028. The shipment is destined for DLA Distribution Puget Sound in Bremerton, Washington, with FOB Origin terms and inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality standards, including Item Unique Identification per MIL-STD-130 and packaging requirements per MIL-STD-2073-1E and MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for specified lot sizes. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases such as batteries or sensors as defined by NAVSEA.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-345Q
This contract is for the procurement of 371 fluid filter elements under solicitation number SPE7M4-26-T-345Q for the Department of Defense Fluid Handling Division. The items are identified by NSN 4330-01-478-7542 and correspond to part numbers 791991-001 from Pacific Consolidated Industries LLC or BCA1023 from Brighton Cromwell LLC. This is designated as a critical application item with a delivery requirement of 167 days after order, with a required delivery date of February 7, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with specific technical and quality requirements is mandatory, including DLA packaging requirements RP001, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and requires adherence to the DLA Master List of Technical and Quality Requirements.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
FLANGE, PIPE
Solicitation # SPE7M3-26-Q-0185
This contract is a solicitation for the procurement of nine pipe flanges, identified by NSN 4730-01-622-9474 and part number 085236 from Sauer Compressors USA, Inc. The agreement is established as a firm fixed price contract with a delivery timeline of 340 days after order. Inspection and acceptance are both set at the destination, while the shipping terms are FOB origin. The procurement is subject to strict DLA packaging and marking requirements, specifically adhering to MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details