Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

OCONUS Radar System Installation and Field Testing

Active

Federal

Response Deadline11/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves the physical installation and operational validation of RFCBAs for prime contractors supporting AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires the transportation and installation of units onto a 27-meter radar system located OCONUS, followed by a mandatory 30-day operational validation period within a live environment. To successfully execute this requirement, the contractor must possess specialized radar integration equipment and robust OCONUS logistics capabilities. The final deliverables for this contract include the fully installed RFCBAs and a comprehensive 30-day operational validation report. This procurement is managed under the Department of Defense through the FA8507 ALCMC ESKC agency. Interested parties must submit their responses by the deadline of November 30, 2026, to be considered for this technical installation and field testing project.

General Info

Install and validate RFCBAs on OCONUS radar systems for AFLCMC/ESGK-R projects by November 2026.

Agency

Department Of Defense → FA8507 Alcmc Eskc

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Warner Robins, GA, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8507_RFCBA_SourcesSought.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radio Frequency Calibration Backplane Assembly (RFCBA)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 05:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8507 Alcmc Eskc

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8507 Alcmc Eskc

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical installation and operational validation of RFCBAs for prime contractors on AFLCMC/ESGK-R Strategic Ground Sensors projects. Transports and installs units on a 27-meter radar system located OCONUS and conducts a 30-day operational validation period in a live environment. Requires radar integration equipment and OCONUS logistics capabilities. Delivers installed RFCBAs and a 30-day operational validation report.

Similar Contracts

Same NAICS industry code

LED Lighting and Occupancy Sensor Upgrades DRAFT

Solicitation # 872291

This firm-fixed-price solicitation involves a site-wide upgrade of the LED lighting and occupancy sensors at the Buffalo Federal Detention Facility in Batavia, New York. The project scope encompasses all necessary engineering, labor, supervision, equipment, materials, testing, and commissioning required to replace existing fluorescent fixtures, lamps, and ballasts with energy-efficient LED alternatives. The contractor is responsible for the proper disposal or recycling of all removed materials and must provide a minimum two-hour training session for facility maintenance personnel upon completion. Key deliverables include a Quality Control Plan within 15 days of award, a site survey within 30 days, and comprehensive closeout documentation consisting of as-built drawings, warranty information, and a 5% attic stock of materials. The contract is issued as an 8(a) Multiple Award Construction Contract (MACC) task order with an estimated magnitude between $2 million and $2.3 million. The period of performance is set for 180 calendar days following the notice to proceed. Award will be made to the offeror proposing the lowest total evaluated price. All work must comply with OSHA safety standards, the Americans with Disabilities Act, and the Davis-Bacon Act, specifically adhering to the NY20260110 wage determination for Genesee County. Proposals must be submitted in two separate volumes via email, and the contractor is required to utilize the Invoice Processing Platform (IPP) for all electronic payment requests accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

in about 9 hours

Conex Offices for Forensics Personnel - St. Thomas

Solicitation # 872300

The US Immigration and Customs Enforcement (ICE) is soliciting proposals for a firm-fixed-price task order to provide and install two 40ft steel conex offices for forensic personnel at the St. Thomas HSI Facility in the US Virgin Islands. These high-security units are designed to provide an environmentally controlled and secure setting for handling sensitive evidence and must include air conditioning, electrical outlets, lighting, security windows, a steel door with a Cypher lock, insulation, vinyl flooring, and fire extinguishers. The installation requires placing the units on reinforced concrete slabs and connecting them to the nearest electrical circuit. The project has an estimated magnitude between $250,000 and $300,000, with a period of performance of 364 calendar days from the Notice to Proceed. This is an 8(a) Multiple Award Construction Contract (MACC) set-aside. Offerors are required to conduct a site survey prior to proposal submission and must adhere to strict security protocols, including signing a Non-Disclosure Agreement and completing Cybersecurity Awareness Training. All materials and equipment must comply with the Buy America Act. The award will be made to the contractor proposing the lowest total evaluated price, with evaluation factors including technical approach, safety and quality control, and price. Proposals must be submitted electronically via email by the deadline, and all work must comply with prevailing wage determinations for the Virgin Islands and relevant building codes such as NFPA 70 and the International Building Code.

Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

in about 9 hours

CBP: Replacement Fiber Line

Solicitation # CBP: Replacement Fiber Line

This subcontracting opportunity, issued by Management and Training Corporation (MTC) for the Earle C. Clements Job Corps Center in Morganfield, Kentucky, involves the replacement of existing multi-mode fiber optic cabling with 12 strand single mode fiber optic cabling. The project requires the removal of retired aerial fiber lines and splice boxes and the installation of new 12 strand single mode aerial fiber to provide network connectivity between the building 2436 network closet (MDF) and the building 2443 maintenance office (IDF). The contractor must provide all labor, equipment, and materials, including Belden FS3L0024NS 12 strand OS2 OSP fiber or an equivalent brand, along with necessary supports, ends, and rack-mounted enclosures. The contract is a fixed-price, single lump sum agreement with an estimated value of up to 25,000 dollars. Bids are due by October 5, 2026, and must be submitted via email to the primary point of contact, Angie Mahoney. To be considered, bidders must conduct a mandatory physical site visit, submit a bid bond guarantee, and provide a detailed cost breakout. Award decisions are based on overall best value. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Compliance requirements include adherence to the Davis-Bacon Act for prevailing wage rates as specified in Kentucky wage determination KY20250041. Awarded contractors must possess a Unique Entity Identifier (UEI) and provide performance and payment bonds if the bid is 25,000 dollars or greater. The contract incorporates several FAR clauses regarding small business representations, foreign purchase restrictions, and the protection of sensitive government information. Final acceptance of the work is contingent upon acceptable workmanship and the completion of all punch list items as approved by the buyer and government representatives.

Earle C. Clements Job Corps Center

POSTED

about 5 hours ago

DEADLINE

Town of Thurmont – Hunting Creek PFAS Improvements

Solicitation # town-thurmont-hunting-creek-pfas-improvements

Conewago Enterprises, Inc. is seeking qualified Disadvantaged Business Enterprises for the Town of Thurmont Hunting Creek PFAS Improvements project located in Maryland. Bids are due by October 2, 2026, at 12 PM EST, though this deadline may be subject to change via addendum. Subcontracting and supply opportunities cover a wide range of trades, including electrical, HVAC, plumbing, masonry, roofing, painting, and drywall. Additional needs include erosion control, landscaping, seeding, surveying, rebar, pipes and fittings, and toilet accessories. Interested parties should contact the Estimating Department via email at cei-estimating@conewago.com to obtain bidding documents or ask questions.

Conewago Enterprises, Inc.

POSTED

about 5 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), seeks a contractor for a variety of facility maintenance and construction services in Louisiana. The scope of work encompasses electrical repairs and grounding system updates, roofing installation, plumbing replacements, grading work, painting, and door repairs. The estimated magnitude of construction for this project is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as a small business set-aside, welcoming bids from Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned or Service-Disabled Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of November 16, 2026. The project falls under NAICS code 238210 and is managed by primary point of contact Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 5 hours ago

DEADLINE

in about 2 months

Emergency Lighting and Audible Warning SystemsThis subcontract for Emergency Lighting and Audible Warning Systems involves the supply and installation of audible and visual traffic warning devices for prime contractors delivering ambulances to the Fire Chiefs Association of Massachusetts. The scope of work includes the installation of LED warning lights, sirens, and electronic control modules, as well as the comprehensive testing of all circuits, switches, and buzzers to ensure a fully functional warning system. All installations must strictly adhere to NFPA requirements and established electrical safety standards. Managed by Municipal Procurement Services in Massachusetts, the project is categorized under NAICS code 238210 and will be performed in Boston. The solicitation was posted on September 28, 2026, with a response deadline of November 2, 2026.

MAP03 - Municipal Procurement Services

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Underground Primary Feeder InstallationThis subcontract for the Fort Valley Utility Commission involves the installation of a three-phase underground electric distribution system. The selected licensed electrical contractor will be responsible for installing underground primary cables, conduit systems, pad-mounted transformers, PME switchgear, primary metering equipment, terminating cabinets, vaults, and pads. The scope of work also includes the execution of grounding systems and the completion of testing and commissioning in accordance with NESC and ECG Construction Assembly Specifications to deliver a commissioned 7.2 kV / 12.47 kV system. The project is categorized under NAICS code 238210 and was posted on September 28, 2026. Interested parties must submit their responses by the deadline of November 10, 2026, at 2:00 PM.

Fort Valley Utility Commission

POSTED

about 16 hours ago

DEADLINE

in about 1 month

LED Lighting Installation ContractorThis subcontract for the Bulloch Board of Education in Georgia involves the installation of LED lighting solutions for institutional facility projects. The selected contractor is responsible for removing existing lighting, installing new LED fixtures, performing all necessary wiring and electrical connections, and managing the disposal of old equipment. To qualify, the contractor must hold the required electrical licenses and possess the equipment necessary for ceiling work, such as lifts and ladders. All project tasks must be completed within a strict 60-day window. The final deliverables include a fully operational LED system and a comprehensive written inventory of all retrofitted systems. Interested parties must submit their responses by November 5, 2026, under NAICS code 238210.

Bulloch Board of Education

POSTED

about 16 hours ago

DEADLINE

in about 1 month

LED Lighting Project #FY2027-Phase 03- Mill Creek Elem

Solicitation # PE-55612-NONST-2027-000000037

Bulloch County Schools is soliciting proposals for the LED Lighting Project #FY2027-Phase 03 to retrofit or replace existing lighting technologies with modern LED solutions at Mill Creek Elementary School in Statesboro, Georgia. The selected contractor must conduct a mandatory site audit to identify current lighting and provide a comprehensive proposal including specific technical details on proposed LED solutions, an estimated annual energy savings report, and a detailed plan of action to complete the project within a 60-day window. Substantial completion of the work is required within 90 calendar days from the date of commencement. Proposals must be submitted in sealed envelopes by November 5, 2026, at 2:00 PM. Evaluation is based on a 100-point scale, considering factors such as company data, team personnel, references from institutional projects, and a proven track record of similar work within the last three years. Awarding is at the sole discretion of Bulloch County Schools based on the most advantageous benefit to the district. The contract requires a turn-key, all-inclusive firm cost that incorporates a 10% contingency allowance and covers all materials, labor, insurance, and bonding. Both performance and payment bonds equal to 100 percent of the contract sum are required from a corporate surety authorized in Georgia. Payment terms are net 30 days following final delivery, inspection, and acceptance by a Bulloch County Schools authorized representative.

Bulloch Board of Education

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Maintenance of MHS Communications SystemsThis subcontract involves the maintenance and repair of MHS communications systems for prime contractors operating on MassDOT projects within District 6. The scope of work focuses on troubleshooting and repairing Intelligent Transportation Systems infrastructure, encompassing both the hardware and software essential for highway management. To ensure the delivery of operational systems, the contractor must utilize ITS-specific communication hardware and diagnostic tools. Eligible providers must hold MassDOT pre-qualification in the Intelligent Transportation Systems category. The project is associated with the Massachusetts Highway agency and is based in Boston. Interested parties must submit their responses by October 27, 2026, under NAICS code 238210.

0H100 - HIGHWAY

POSTED

about 17 hours ago

DEADLINE

As-Needed Electrical, Controls, And Instrumentation Services

Solicitation # 20260927006

East Valley Water District

POSTED

about 17 hours ago

DEADLINE

Traffic Signal Installation & IntegrationThis subcontract for the City of Ontario involves the installation and integration of traffic signal systems, including controllers and hardware, for prime contractors on traffic improvement projects. All work must be performed according to Project Plans and Caltrans Standard Specifications Sections 82, 84, 86, and 87. The selected contractor is responsible for maintaining existing and temporary electrical systems and delivering a fully operational, tested, and warranted system. To qualify, contractors must hold a C-10 Electrical Contractor license and maintain DIR Registration. The project is located in Ontario, California, with a response deadline of October 8, 2026.

CITY OF ONTARIO

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8507 Alcmc Eskc

Same awarding agency

RF Calibration and First-Article TestingThis subcontract opportunity involves performing technical qualification and first-article testing for RF Circuit Board Assemblies (RFCBAs) supporting AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires verifying operational performance and calibration accuracy within the 2–4 GHz frequency range. To achieve this, the contractor must utilize specialized equipment including spectrum analyzers, network analyzers, and RF shielded chambers while strictly adhering to provided technical data packages and United States Government qualification standards. Final deliverables include comprehensive first-article test reports and formal qualification certifications. The contract is issued by the Department of Defense under agency FA8507 ALCMC ESKC, with the place of performance located in Warner Robins. This procurement is classified under NAICS code 541715 and is categorized as a subcontract. Interested parties must submit their responses by the deadline of November 30, 2026, at 5:00 PM. The project is essential for ensuring the technical integrity and mission readiness of strategic ground sensor components for prime contractors.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 21 hours ago

DEADLINE

RF Backplane Assembly ManufacturingThis subcontract involves the fabrication and assembly of S-Band Radio Frequency Calibration Backplane Assemblies (RFCBAs) to support AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires manufacturing backplane assemblies designed for a 2 to 4 GHz frequency range, ensuring they serve as Form, Fit, and Function replacements according to specific technical drawings. The production process necessitates the use of high-frequency PCB materials and precision RF assembly tools to meet strict technical requirements. The contract deliverables include one first-article unit followed by up to 12 completed RFCBA units. Managed under the Department of Defense through the Alcmc Eskc agency, the performance of this contract is centered in Warner Robins. Interested parties must adhere to the submission deadline of November 30, 2026, for this manufacturing requirement classified under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Technical Data Package (TDP) Development & CAD ConversionThis subcontract opportunity involves providing specialized engineering services to support AFLCMC/ESGK-R Strategic Ground Sensors projects. The primary objective is to deliver full technical data rights to prime contractors by converting existing engineering drawings into native CAD, CAE, and CAM formats. Using professional software such as SolidWorks or AutoCAD, the service provider will also generate 2-D PDF documentation. All deliverables must strictly adhere to USG non-proprietary requirements to ensure that the resulting technical data packages are free from proprietary restrictions. The contract, categorized under NAICS code 541330, is managed by the Department of Defense through the FA8507 ALCMC ESKC agency. Performance is centered in Warner Robins, and the scope specifically requires the delivery of both native CAD files and 2-D PDF technical drawings. Interested parties must note the key timeline, with a posting date of September 28, 2026, and a response deadline of November 30, 2026.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

RF Testing and Validation ServicesThe RF Testing and Validation Services subcontract, issued by the Department of Defense for the ALCMC ESKC agency, focuses on providing independent verification, validation, and environmental testing for prime contractors. Based in Warner Robins, the scope of work includes signal integrity analysis, anechoic chamber testing, and thermal vacuum and vibration testing conducted in accordance with MIL-STD-810. The service provider will utilize specialized vibration tables and NIST traceable calibration to ensure precision. Key deliverables for this engagement include comprehensive test reports, performance data, and validation certificates. The opportunity was posted on September 28, 2026, with a response deadline of November 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Power Supply Design and ManufacturingThis subcontract for Power Supply Design and Manufacturing supports prime contractors on ALCMC ESKC projects under the Department of Defense. The scope of work involves the design, fabrication, and integration of power supply units, specifically focusing on AC/DC or DC/DC converters, voltage regulation, and thermal management systems. These units must be compatible with microwave receivers and utilize specialized power electronics components and thermal interface materials. All deliverables must strictly adhere to MIL-STD-461 and MIL-STD-704 standards to ensure military compliance. The project is associated with NAICS code 335999 and will be performed in Warner Robins. The response deadline for this opportunity is November 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Microwave Receiver Component ManufacturingThis subcontract for Microwave Receiver Component Manufacturing supports the Department of Defense under the FA8507 ALCMC ESKC agency. The selected provider will manufacture core microwave receiver hardware for prime contractors, focusing on the precision machining of RF cavities, PCB fabrication for microwave circuits, and the assembly of receiver modules. All work must adhere to military or aerospace standards, utilizing high-frequency PCB substrates and specialized RF test equipment. The project is based in Warner Robins and requires the contractor to hold AS9100 or ISO 9001 certifications to ensure quality compliance. The final deliverables consist of completed microwave receiver modules and assemblies. The response deadline for this opportunity is November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 21 hours ago

DEADLINE

RF Performance Testing and CertificationThis subcontract involves performing critical verification and validation testing on fabricated RF Power Distribution Components for prime contractors supporting ALCMC EKSC projects. The scope of work requires conducting specialized technical assessments, including Vector Network Analyzer testing, insertion loss measurement, return loss testing, and power handling verification. To ensure compliance with military RF performance standards, all testing must be performed using Spectrum Analyzers and RF Anechoic Chambers, with all equipment requiring NIST traceable calibration. The project is managed under the Department of Defense through agency FA8507 ALCMC EKSC, with the place of performance located in Warner Robins. The successful contractor will be responsible for delivering comprehensive test reports and performance certifications for three specific units. Interested parties must submit their responses by the deadline of November 30, 2026, to fulfill the requirements of this technical performance and certification contract.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

S-Band RF Component ManufacturingThis subcontract involves the manufacturing of three completed S-Band Radio Frequency Power Divider/Combiner units for the Department of Defense under the ALCMC EKSC project. The scope of work includes precision machining, CNC milling of RF cavities, waveguide fabrication, and the assembly of combiner/divider housings. To ensure high conductivity and performance, the fabrication process requires the use of RF-grade aluminum or copper alloys finished with gold plating. The contract is managed by the Department of Defense through the FA8507 ALCMC EKSC agency, with the place of performance located in Warner Robins. Qualified contractors must adhere to strict quality standards, specifically maintaining AS9100 or ISO 9001 quality management systems. Interested parties must submit their responses by the deadline of November 30, 2026, to fulfill the requirements of this specialized hardware manufacturing effort.

POSTED

about 21 hours ago

DEADLINE

RF Power Divider/Combiner Engineering ServicesThis subcontract opportunity for RF Power Divider/Combiner Engineering Services involves performing technical design and electromagnetic simulation for prime contractors on ALCMC EKSC S-Band RF projects. The scope of work requires conducting RF simulations using HFSS or CST, performing impedance matching, and executing signal loss analysis to produce technical drawings suitable for fabrication. Engineers must utilize RF simulation software and S-parameter analysis tools to ensure all designs comply with specific S-Band frequency specifications and military-grade RF standards. The final deliverables include a comprehensive technical design package, detailed simulation reports, and fabrication drawings. Issued by the Department of Defense under agency FA8507 ALCMC ESKC, this subcontract is classified under NAICS code 541330. The place of performance is located in Warner Robins, and the solicitation is scheduled to be posted on September 28, 2026, with a response deadline of November 30, 2026. Interested parties must meet the technical requirements for high-level electromagnetic simulation and military standard compliance to successfully fulfill the contract obligations.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Electronic Component Procurement & DistributionThis subcontract involves the procurement and distribution of electronic components to support prime contractors working on AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work includes the supply of various essential parts such as connectors, capacitors, resistors, and integrated circuits. To ensure mission readiness and hardware integrity, the provider is responsible for sourcing and vetting authentic components in strict accordance with the B3864294-1 Bill of Materials. All deliveries must be provided as kitted electronic components and must include Certificates of Conformance to mitigate the risk of counterfeit parts entering the supply chain. The contract requires adherence to high quality and security standards, specifically necessitating AS6081 certification to manage electronic component distribution and prevent fraudulent items. Managed under the Department of Defense through the FA8507 Alcmc Eskc agency, the performance of this contract is centered in Warner Robins. Interested parties must submit responses by the deadline of November 30, 2026, to participate in this procurement effort categorized under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

High-Density Interconnect (HDI) PCB FabricationThis subcontract involves the fabrication of high-density interconnect raw multi-layer printed circuit boards to support AFLCMC/ESGK-R Strategic Ground Sensors projects for the Department of Defense. The scope of work includes specialized manufacturing processes such as layer registration, drilling, plating, etching, and surface finish application. The contractor is required to utilize high-layer count equipment and work with specialized substrates, including FR-4 and Polyimide, to deliver unpopulated, fabricated PCB blanks. To qualify for this requirement, providers must maintain IPC-A-600 and AS9100 certifications. The contract is categorized under NAICS code 334413 and is associated with the Alcmc Eskc agency. Performance is centered in Warner Robins, with a response deadline set for November 30, 2026. This opportunity is specifically designed for manufacturers capable of meeting rigorous aerospace and defense standards for complex electronic components.

Semiconductor and Related Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

Electronic Testing and Validation ServicesThe Electronic Testing and Validation Services subcontract supports AFLCMC/ESGK-R Strategic Ground Sensors projects for the Department of Defense. The scope of work involves performing functional testing and signal integrity analysis for prime contractors, specifically focusing on continuity testing, power-on self-tests, thermal cycling, and vibration testing. These technical tasks require the use of specialized equipment such as oscilloscopes and environmental chambers, and the service provider must maintain ISO/IEC 17025 certification to deliver formal test reports and certified pass documentation. This subcontracting opportunity is categorized under NAICS code 541380 and is managed by the FA8507 ALCMC ESKC agency. The place of performance is located in Warner Robins, and the solicitation process is scheduled with a posting date of September 28, 2026, and a response deadline of November 30, 2026. Interested parties must meet the rigorous technical and certification requirements to provide the necessary validation services for these strategic defense projects.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS