Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

RF Testing and Validation Services

Active

Federal

Response Deadline11/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The RF Testing and Validation Services subcontract, issued by the Department of Defense for the ALCMC ESKC agency, focuses on providing independent verification, validation, and environmental testing for prime contractors. Based in Warner Robins, the scope of work includes signal integrity analysis, anechoic chamber testing, and thermal vacuum and vibration testing conducted in accordance with MIL-STD-810. The service provider will utilize specialized vibration tables and NIST traceable calibration to ensure precision. Key deliverables for this engagement include comprehensive test reports, performance data, and validation certificates. The opportunity was posted on September 28, 2026, with a response deadline of November 30, 2026, under NAICS code 541380.

General Info

DoD subcontract for RF testing, validation, and environmental services for ALCMC ESKC agency.

Agency

Department Of Defense → FA8507 Alcmc Eskc

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Warner Robins, GA, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8507_ReceiveMicrowave_SourcesSought.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Receive Microwave (And Associated Power Supplies)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 05:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8507 Alcmc Eskc

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8507 Alcmc Eskc

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent verification, validation, and environmental testing for prime contractors on ALCMC ESKC projects. Conducts anechoic chamber testing, signal integrity analysis, and thermal vacuum/vibration testing per MIL-STD-810. Utilizes NIST traceable calibration and specialized vibration tables. Delivers test reports, validation certificates, and performance data.

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as subconsultants for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The project is funded in whole or in part by a U.S. Environmental Protection Agency Community Grant and is estimated to span approximately 210 construction working days. The selected subconsultant will be responsible for geotechnical and materials inspection and testing services, including material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms. Key deliverables include initial sampling and acceptance testing of proposed materials, ongoing sampling throughout construction, and a final certification memorandum signed by a professional engineer identifying any non-complying materials. The contract requires strict adherence to federal and state regulations, including EPA Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33, procurement standards under 2 CFR 200.321, and the Build America, Buy America Act. Additionally, the firm must comply with California prevailing wage laws under Labor Code 1770 et seq. and maintain registration with the Department of Industrial Relations. Award is contingent upon Albert A. Webb Associates being selected by the City of Hemet. Interested firms must provide a technical proposal, fee proposal, and documentation of small or disadvantaged business certifications. Final project records must be delivered in both a labeled hard-copy three-ring binder and a PDF format on a USB thumb drive.

Albert A. Webb Associates

POSTED

about 4 hours ago

DEADLINE

Rubber Testing For Electrical Safety Equipment - Professional Services Agreement

Solicitation # 20260926003

City of Anaheim Public Utilities Department

POSTED

about 4 hours ago

DEADLINE

Precision Cleaning Services (Oxygen Systems)This subcontract for Precision Cleaning Services (Oxygen Systems) supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The contractor is responsible for the precision cleaning and testing of components to ensure they are free of contaminants for oxygen-rich environments, specifically focusing on shipboard oxygen, helium, nitrogen, and hydrogen systems. All work must adhere to Special Clean 02-N2 (Green) protocols and comply with MIL-STD-1330 standards to deliver certified Oxygen Clean components. The project requires the use of specialized cleaning solvents and testing equipment under NAICS code 541380. Interested parties must submit their responses by October 9, 2026, at 8:30 PM.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Metallurgical and Physical Analysis ServicesThis subcontract for Metallurgical and Physical Analysis Services supports Navy submarine projects through the Department of Defense, specifically under the Navsup Weapon Systems Support Mech agency. The selected provider will perform chemical and physical analysis for prime contractors, focusing on quantitative mill or industrial laboratory testing for specific items listed on drawing 4491151. The work requires the use of industrial metallurgical testing equipment and mandates a Certified Quantitative Mill or Industrial Laboratory Certification. The primary deliverable for this engagement is the submission of certified laboratory certification reports. The solicitation was posted on September 28, 2026, with a response deadline of October 26, 2026, under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

Geotechnical Laboratory Testing and Data ManagementThis subcontract involves performing specialized laboratory analysis on recovered soil and rock samples for prime contractors working on USACE Memphis District projects. The scope of work requires the testing of preserved samples and the seamless integration of all resulting data into the Open Ground database. To qualify, the performing entity must operate a certified geotechnical testing laboratory and possess the necessary Open Ground software to manage and deliver finalized data entries and laboratory test reports. All technical procedures must strictly adhere to established ASTM and AASHTO standards to ensure data accuracy and compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense through the W07V Endist Memphis agency. Interested parties must submit their responses by the deadline of October 12, 2026, to be considered for this geotechnical testing and data management requirement.

W07V Endist Memphis

POSTED

DEADLINE

Hickman Borings Drilling and Testing

Solicitation # W912EQ26QA050

Solicitation W912EQ26QA050, issued by the USACE Memphis District, is a firm fixed price contract for the recovery of intact cemented sand and gravel samples from the bottom of the Mississippi River near Hickman, Kentucky. The project requires the contractor to provide all labor, equipment, and materials to execute river-based rotosonic borings and rock coring at designated coordinates. Key deliverables include the recovery and preservation of samples, laboratory testing at a USACE-validated facility, and the integration of engineering data into the OpenGround database. The period of performance is scheduled from October 19, 2026, to December 31, 2026, with a preferred operational window during the low-water season from September 1 through December 31. The contractor must adhere to strict technical standards, including ASTM D2113 for rock coring, ASTM D6914 for sonic drilling, and ASTM D4220 and D5079 for sample preservation and transport. A minimum core recovery rate of 80% per boring is required for sonic drilling. All samples must be delivered to the Ensley Engineering Yard in Memphis, Tennessee, with a seven-day advance notice. Award will be based on best value, evaluating technical acceptability, satisfactory past performance, and price. To be considered responsive, offerors must be registered in SAM.gov and have a NIST score entered in the Supplier Performance Risk System. Payment will be processed electronically via the Wide Area WorkFlow system.

W07V Endist Memphis

POSTED

DEADLINE

Geotechnical and Environmental Engineering, Testing, and Inspection ServicesThe NASA Jet Propulsion Laboratory is seeking a contractor to provide geotechnical and environmental engineering, testing, and inspection services. This project is based in Pasadena, California, and falls under NAICS code 541380. The contract is designated as an A&E Board award with a period of performance extending through May 26, 2025. There are currently no additional options listed for this engagement.

NASA Jet Propulsion Laboratory

POSTED

DEADLINE

Testing and Inspection ServicesThe City of San Bruno is seeking a subcontractor for Testing and Inspection Services to support Community Services Department pathway projects. The selected provider will perform material testing for prime contractors, specifically focusing on quality assurance for asphalt and concrete through the use of field sampling tools and laboratory equipment. The contractor is responsible for delivering certified laboratory reports and quality compliance documentation to the city. This opportunity is categorized under NAICS code 541380, with the place of performance located in San Bruno, California. The response deadline for this solicitation is October 15, 2026.

City of San Bruno

POSTED

DEADLINE

Conservation/Parks/Gulf-FY27 Annual-Fuel Storage Tank Inspections

Solicitation # SRC0000036688

Solicitation SRC0000036688 is an all-or-none requirement for the Gulf State Park in Alabama to provide comprehensive testing, inspection, and repair services for Wayne and OPW FMS petroleum pump equipment and two underground fuel storage tanks. The facility, identified as Facility ID 11433-003-002038 and located at 3180 Maintenance Dr., Gulf Shores, AL 36542, consists of one 3,000-gallon midgrade fuel tank and one 1,000-gallon diesel tank. The contract period is valid from October 1, 2026, through September 30, 2027. The scope of work includes monthly walkthrough inspections and annual underground storage tank inspections. Required technical testing consists of annual automatic tank gauge tests, combo line tightness and leak detector tests, and liquid sensor tests, as well as triennial overfill and spill bucket tests. The selected vendor must be ADEM and APAC certified and possess the full capability to perform all necessary repairs on the fuel tanks. Additionally, the contractor is responsible for reporting and logging all test results with ADEM to ensure full regulatory compliance.

Gulf State Park

POSTED

DEADLINE

Water Quality Testing LaboratoryThis subcontract opportunity is for a Water Quality Testing Laboratory to provide specialized analysis of water samples for prime contractors working on Deseret Public Infrastructure District projects. The selected provider will be responsible for performing water-quality sampling and testing to ensure compliance with municipal drinking water standards, utilizing certified chemistry and microbiology equipment to deliver official laboratory reports. To be eligible, the contractor must hold certification from the Utah Division of Drinking Water or an equivalent regulatory body. This opportunity falls under NAICS code 541380 and was posted on September 25, 2026, with a response deadline of October 10, 2026.

POSTED

DEADLINE

K-9 Diagnostic and Laboratory ServicesThe K-9 Diagnostic and Laboratory Services subcontract provides specialized medical testing and analysis for prime contractors supporting Virginia Community College System K-9 unit projects. Based at Northern Virginia Community College, the scope of work includes performing electrocardiograms, diagnostic imaging via X-ray and ultrasound, and various specialized laboratory tests. The selected provider must supply all necessary equipment, including X-ray and ultrasound machines, and employ licensed veterinarians or certified veterinary technicians to deliver comprehensive diagnostic reports. This opportunity is managed by the Virginia Community College Shared Services Center under NAICS code 541380. The solicitation was posted on September 25, 2026, with a response deadline of October 26, 2026. Interested parties must ensure they meet the professional licensing and equipment requirements to provide the necessary clinical deliverables for the K-9 units.

Virginia Community College Shared Services Center

POSTED

DEADLINE

Special Inspections ServicesThis subcontracting opportunity with Stafford County Public Schools involves providing specialized geotechnical and structural construction inspections for prime contractors. The scope of work includes verifying reinforced soils, drainage structures, and the interaction between soil and rock structures to ensure all construction adheres to approved project plans. Successful candidates must possess an ICC Certified Special Inspector credential or an equivalent qualification to perform these technical assessments. The contract requires the delivery of detailed inspection reports and formal certifications of compliance for various project locations within the Stafford County Public Schools system. Interested parties must submit their responses by the deadline of October 23, 2026. This procurement is classified under NAICS code 541380 and is intended for specialized inspection services to support school district infrastructure projects.

Stafford County Public Schools

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8507 Alcmc Eskc

Same awarding agency

Power Supply Design and ManufacturingThis subcontract for Power Supply Design and Manufacturing supports prime contractors on ALCMC ESKC projects under the Department of Defense. The scope of work involves the design, fabrication, and integration of power supply units, specifically focusing on AC/DC or DC/DC converters, voltage regulation, and thermal management systems. These units must be compatible with microwave receivers and utilize specialized power electronics components and thermal interface materials. All deliverables must strictly adhere to MIL-STD-461 and MIL-STD-704 standards to ensure military compliance. The project is associated with NAICS code 335999 and will be performed in Warner Robins. The response deadline for this opportunity is November 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Microwave Receiver Component ManufacturingThis subcontract for Microwave Receiver Component Manufacturing supports the Department of Defense under the FA8507 ALCMC ESKC agency. The selected provider will manufacture core microwave receiver hardware for prime contractors, focusing on the precision machining of RF cavities, PCB fabrication for microwave circuits, and the assembly of receiver modules. All work must adhere to military or aerospace standards, utilizing high-frequency PCB substrates and specialized RF test equipment. The project is based in Warner Robins and requires the contractor to hold AS9100 or ISO 9001 certifications to ensure quality compliance. The final deliverables consist of completed microwave receiver modules and assemblies. The response deadline for this opportunity is November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Receive Microwave (And Associated Power Supplies)

Solicitation # FA8507_ReceiveMicrowave_SourcesSought

The United States Government, through the Air Force Life Cycle Management Center at Robins Air Force Base, Georgia, is conducting market research to identify capable sources for the qualification and production of X-Band Receive Microwave Assemblies and associated power supplies, including the replacement of obsolete components with Fit, Form, and Function equivalents. The effort involves the delivery of up to ten RMAs, four low noise amplifier power supplies, and four RMA power supplies, accompanied by a complete 100% Technical Data Package in native CAD/CAE/CAM and 2-D PDF formats, with unlimited data rights and no proprietary restrictions. First-article testing must be conducted at the contractor’s facility, followed by a 30-day operational validation on a 27-meter radar at an overseas location prior to full-scale production. Contractors must be prepared to work within a complex team environment that includes military, civilian, and partner agency personnel, and must clearly mark any proprietary information to avoid forfeiture of rights. Responses are limited to a 30-page capabilities statement and must include company size status, CAGE and DUNS codes, past performance, and any proposed teaming or subcontracting arrangements supported by documented evidence, though such arrangements are not mandatory. The solicitation number is FA8507_ReceiveMicrowave_SourcesSought, with a response deadline of August 22, 2026, and responses must be submitted exclusively via email to designated contracting and technical contacts. This notice is strictly for market research purposes under FAR 15.201(e), with no obligation to award a contract, no funds available for response preparation, and no solicitation documents issued to date. The NAICS code is 334511, with a small business size standard of 1,350 employees, and small businesses are specifically encouraged to respond; the government will analyze responses to determine if a set-aside or preference is warranted, including potential division of work into exclusive small business opportunities. While no formal evaluation factors, contract types, or pricing details are established, the Government is considering a Firm-Fixed Price contract structure and invites proposers to suggest optimal CLIN and contract type configurations. All submitted information becomes Government property, and no confidentiality or return of materials is guaranteed. Security requirements and foreign participation guidelines remain undetermined but are expected to be restrictive, requiring contractors to anticipate close collaboration with multiple U.S. government entities.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS