Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First-Article RF Testing and Validation

Active

Federal

Response Deadline11/18/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled First-Article RF Testing and Validation, involves performing technical testing of CNWA hardware for prime contractors on military radar projects for the Department of Defense. The scope of work includes RF signal testing, leakage testing, and performance validation utilizing specialized equipment such as Vector Network Analyzers, RF spectrum analyzers, and anechoic chambers. To ensure quality and compliance, the provider must adhere to ISO/IEC 17025 or equivalent military RF testing standards, ultimately delivering validated hardware and a comprehensive first-article test report. The project is managed by the FA8507 Alcmc Eskc and will be performed in Warner Robins, Georgia. Interested parties must submit their responses by November 18, 2026, following the posting date of September 28, 2026. The opportunity is categorized under NAICS code 541380.

General Info

RF testing and validation of CNWA military radar hardware in Warner Robins, Georgia.

Agency

Department Of Defense → FA8507 Alcmc Eskc

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Warner Robins, GA, 31098, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8507_CrossOverNetwork_SourcesSought.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Cross Over Network Waveguide Assembly Qualification and Production (P/Ns G638416-1)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineNov 18

Submission deadline

Response Deadline

11/18/2026, 09:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8507 Alcmc Eskc

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8507 Alcmc Eskc

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first-article technical testing of CNWA hardware for prime contractors on military radar projects. Conducts RF signal testing, leakage testing, and performance validation using Vector Network Analyzers (VNA), RF spectrum analyzers, and anechoic chambers. Requires ISO/IEC 17025 or equivalent military RF testing standards. Delivers a first-article test report and validated hardware.

Similar Contracts

Same NAICS industry code

Geotechnical and Environmental Engineering, Testing, and Inspection ServicesThe NASA Jet Propulsion Laboratory is seeking a contractor to provide geotechnical and environmental engineering, testing, and inspection services. This project is based in Pasadena, California, and falls under NAICS code 541380. The contract is designated as an A&E Board award with a period of performance extending through May 26, 2025. There are currently no additional options listed for this engagement.

NASA Jet Propulsion Laboratory

POSTED

about 14 hours ago

DEADLINE

Asbestos Bulk Sample AnalysisThis subcontract involves providing specialized laboratory testing and analysis of asbestos-containing materials for prime contractors working on Wrexham County Borough Council projects. The selected provider will be responsible for receiving bulk samples collected from site surveys and utilizing accredited laboratory facilities to identify the specific type and concentration of asbestos present. A mandatory requirement for this contract is UKAS accreditation to ensure all testing meets national standards. The primary deliverable is the provision of certified analytical test reports for all processed bulk samples. Interested parties must submit their responses by the deadline of November 13, 2026.

Wrexham County Borough Council

POSTED

DEADLINE

in about 1 month

Asbestos Survey and Analytical Works for Wrexham County Borough Council

Solicitation # Proc 26-48

Wrexham County Borough Council is seeking a single contractor for Asbestos Surveys and Analytical Works across all council-owned or managed buildings, including private properties under council responsibility such as local lettings. The contract, identified as Proc 26-48, has an estimated value of 600,000 GBP excluding VAT. The scope of work includes domestic and public building reinspections under CAR2012 Reg 4, demolition and refurbishment surveys, bulk sampling, air testing, water absorption testing, site supervision of removal works, consultancy, and asbestos awareness training. The agreement is set for an initial four-year term from February 1, 2027, to January 31, 2031, with a possible two-year extension based on satisfactory performance. The procurement process utilizes a weighted scoring system where quality accounts for 60 percent and price accounts for 40 percent of the evaluation. To ensure compliance with The Control of Asbestos Regulations 2012, the successful contractor and any affiliated organizations within the same business group are strictly prohibited from bidding on the separate asbestos removal services contract. Additionally, the council prohibits the use of subcontractors, requiring the contractor to deliver all services directly. The selected provider must offer a flexible and scalable service to accommodate fluctuating demand. Tenders must be submitted via the etenderWales portal by November 13, 2026.

Wrexham County Borough Council

POSTED

DEADLINE

in about 1 month

Specialized Testing and CommissioningLexington County School District One is seeking a subcontractor for specialized testing and commissioning services for its facility projects. The selected provider will be responsible for performing special inspections, testing, and system commissioning for prime contractors to ensure all new systems meet building code compliance. Key deliverables include the submission of detailed testing reports, commissioning logs, and official certifications of compliance. Qualified candidates must possess professional engineering licenses or certified inspection credentials to perform the work. This opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of November 2, 2026.

Lexington County School District One

POSTED

DEADLINE

Material Testing and Quality ControlThis subcontract for Material Testing and Quality Control supports the City of Lathrop Department of Public Works by providing independent testing of materials and construction for prime contractors. The selected agency will be responsible for conducting material sampling and tests using specialized soil and concrete equipment, culminating in the delivery of detailed material test reports and a final inspection report necessary for project closeout. Qualified candidates must hold the required testing agency certifications to perform these services in Lathrop, California. Interested parties must submit their responses by October 20, 2026, in accordance with the solicitation posted on October 2, 2026.

City of Lathrop

POSTED

DEADLINE

Materials Testing and Special Inspection ServicesThis subcontract for Materials Testing and Special Inspection Services supports prime contractors on City of Tracy aquatic center projects in Tracy, California. The scope of work involves comprehensive testing of critical construction elements, including concrete, reinforcing and structural steel, welding, masonry, soils, asphalt, waterproofing, and roofing. All evaluations must be conducted using accredited laboratory facilities and field equipment to ensure strict adherence to applicable building codes. The selected provider is responsible for generating and delivering certified test reports and detailed inspection logs, culminating in a final inspection summary. Interested parties must respond by October 23, 2026, for this project categorized under NAICS code 541380.

POSTED

DEADLINE

Residential Facility Maintenance and Bed Bug RemediationThis subcontract for Residential Facility Maintenance and Bed Bug Remediation supports the Department of Veterans Affairs in San Francisco. The selected provider will perform janitorial services and specialized pest control for prime contractors on residential projects within the VA Health Care System. The primary objective is to ensure living quarters remain clean and free of mold, hazardous substances, and bed bugs through the execution of aggressive remediation plans. To qualify for this engagement, the contractor must utilize a licensed pest control operator and possess industrial cleaning equipment. The contract was posted on October 2, 2026, with a response deadline of October 23, 2026. All work falls under NAICS code 541380 and is managed through the Network Contract Office 21.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Aerospace Coatings Technical Support SpecialistThis subcontract opportunity is for an Aerospace Coatings Technical Support Specialist to provide technical assistance to prime contractors on Air Force projects located at Hill Air Force Base. The selected provider will offer expert guidance on product selection and troubleshooting while ensuring all applications strictly adhere to Technical Orders, Military Specifications, Technical Data Sheets, and specification manuals. The project is a total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Personnel assigned to this contract must possess DBIDS, CAB, or RAB credentials to secure necessary base access. Interested parties must respond by November 3, 2026.

FA8224 Afsc Ol H Pzim

POSTED

DEADLINE

in about 1 month

First Article Testing and Qualification ServicesThis subcontract, titled First Article Testing and Qualification Services, is issued by the Department of Defense through the Ok DLA Aviation At Oklahoma City. The project involves the testing, inspection, and certification of First Article components for prime contractors on US Air Force aerospace projects. The selected provider will be responsible for verifying the dimensions, material properties, and performance of one to three initial units against the technical data package using metrology equipment and CMM, ultimately delivering approved test samples and First Article Inspection Reports. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. To be eligible, contractors must adhere to AS9100 or equivalent aerospace quality management standards. The solicitation was posted on October 2, 2026, with a response deadline of October 17, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

First Article Testing Services (Destructive and Non-Destructive)This subcontract involves providing specialized destructive and non-destructive testing services for Department of Defense aerospace engine projects. The scope of work includes conducting X-ray, ultrasonic, and dye-penetrant inspections, as well as material consumption tests, to ensure manufacturing integrity and validate internal properties. All work must be performed using NADCAP accredited laboratories and NDT rigs to deliver essential test reports and certifications of acceptance or rejection for first article units. Managed under the Department of Defense through the DLA Aviation office in Oklahoma City, the opportunity is categorized under NAICS code 541380. The solicitation was posted on October 2, 2026, with a response deadline set for November 2, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

(TMDE) for the Emerson/Rosemount Compact Annubar Multivariable Flow Meter.

Solicitation # N3904027Q5885

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

in about 20 hours

Calibration and Temperature Mapping

Solicitation # W81K0027QA015

Solicitation W81K0027QA015 is a request for firm-fixed-price commercial services to provide accredited calibration and temperature mapping for the Food Analysis and Diagnostic Laboratory at Fort Sam Houston, Texas. The scope of work includes on-site services for up to five autoclaves, nine reference thermometers, and twenty-six analytical balances, as well as off-site calibration for up to six reference weight sets and a high volume of pipettes, totaling up to 560 channels for fiscal year 2027. All services and resulting reports must comply with ISO 17025:2017 and American Association for Laboratory Accreditation standards, with final reports delivered within five calendar days of service completion. The period of performance is scheduled from December 1, 2026, to November 30, 2027. This unrestricted solicitation is open to all qualified offerors, including Women-Owned Small Businesses. Quotes will be evaluated based on price and a technical capability statement not exceeding ten pages. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various defense clauses regarding cybersecurity, antiterrorism training, and the prohibition of covered defense telecommunications equipment. Quotations must be submitted electronically to the designated point of contact by October 16, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8507 Alcmc Eskc

Same awarding agency

OCONUS Radar System Installation and Field TestingThis subcontract opportunity involves the physical installation and operational validation of RFCBAs for prime contractors supporting AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires the transportation and installation of units onto a 27-meter radar system located OCONUS, followed by a mandatory 30-day operational validation period within a live environment. To successfully execute this requirement, the contractor must possess specialized radar integration equipment and robust OCONUS logistics capabilities. The final deliverables for this contract include the fully installed RFCBAs and a comprehensive 30-day operational validation report. This procurement is managed under the Department of Defense through the FA8507 ALCMC ESKC agency. Interested parties must submit their responses by the deadline of November 30, 2026, to be considered for this technical installation and field testing project.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 2 months

RF Calibration and First-Article TestingThis subcontract opportunity involves performing technical qualification and first-article testing for RF Circuit Board Assemblies (RFCBAs) supporting AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires verifying operational performance and calibration accuracy within the 2–4 GHz frequency range. To achieve this, the contractor must utilize specialized equipment including spectrum analyzers, network analyzers, and RF shielded chambers while strictly adhering to provided technical data packages and United States Government qualification standards. Final deliverables include comprehensive first-article test reports and formal qualification certifications. The contract is issued by the Department of Defense under agency FA8507 ALCMC ESKC, with the place of performance located in Warner Robins. This procurement is classified under NAICS code 541715 and is categorized as a subcontract. Interested parties must submit their responses by the deadline of November 30, 2026, at 5:00 PM. The project is essential for ensuring the technical integrity and mission readiness of strategic ground sensor components for prime contractors.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

RF Backplane Assembly ManufacturingThis subcontract involves the fabrication and assembly of S-Band Radio Frequency Calibration Backplane Assemblies (RFCBAs) to support AFLCMC/ESGK-R Strategic Ground Sensors projects. The scope of work requires manufacturing backplane assemblies designed for a 2 to 4 GHz frequency range, ensuring they serve as Form, Fit, and Function replacements according to specific technical drawings. The production process necessitates the use of high-frequency PCB materials and precision RF assembly tools to meet strict technical requirements. The contract deliverables include one first-article unit followed by up to 12 completed RFCBA units. Managed under the Department of Defense through the Alcmc Eskc agency, the performance of this contract is centered in Warner Robins. Interested parties must adhere to the submission deadline of November 30, 2026, for this manufacturing requirement classified under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

in about 2 months

Technical Data Package (TDP) Development & CAD ConversionThis subcontract opportunity involves providing specialized engineering services to support AFLCMC/ESGK-R Strategic Ground Sensors projects. The primary objective is to deliver full technical data rights to prime contractors by converting existing engineering drawings into native CAD, CAE, and CAM formats. Using professional software such as SolidWorks or AutoCAD, the service provider will also generate 2-D PDF documentation. All deliverables must strictly adhere to USG non-proprietary requirements to ensure that the resulting technical data packages are free from proprietary restrictions. The contract, categorized under NAICS code 541330, is managed by the Department of Defense through the FA8507 ALCMC ESKC agency. Performance is centered in Warner Robins, and the scope specifically requires the delivery of both native CAD files and 2-D PDF technical drawings. Interested parties must note the key timeline, with a posting date of September 28, 2026, and a response deadline of November 30, 2026.

Engineering Services

POSTED

DEADLINE

in about 2 months

RF Testing and Validation ServicesThe RF Testing and Validation Services subcontract, issued by the Department of Defense for the ALCMC ESKC agency, focuses on providing independent verification, validation, and environmental testing for prime contractors. Based in Warner Robins, the scope of work includes signal integrity analysis, anechoic chamber testing, and thermal vacuum and vibration testing conducted in accordance with MIL-STD-810. The service provider will utilize specialized vibration tables and NIST traceable calibration to ensure precision. Key deliverables for this engagement include comprehensive test reports, performance data, and validation certificates. The opportunity was posted on September 28, 2026, with a response deadline of November 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

DEADLINE

in about 2 months

Power Supply Design and ManufacturingThis subcontract for Power Supply Design and Manufacturing supports prime contractors on ALCMC ESKC projects under the Department of Defense. The scope of work involves the design, fabrication, and integration of power supply units, specifically focusing on AC/DC or DC/DC converters, voltage regulation, and thermal management systems. These units must be compatible with microwave receivers and utilize specialized power electronics components and thermal interface materials. All deliverables must strictly adhere to MIL-STD-461 and MIL-STD-704 standards to ensure military compliance. The project is associated with NAICS code 335999 and will be performed in Warner Robins. The response deadline for this opportunity is November 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 2 months

Microwave Receiver Component ManufacturingThis subcontract for Microwave Receiver Component Manufacturing supports the Department of Defense under the FA8507 ALCMC ESKC agency. The selected provider will manufacture core microwave receiver hardware for prime contractors, focusing on the precision machining of RF cavities, PCB fabrication for microwave circuits, and the assembly of receiver modules. All work must adhere to military or aerospace standards, utilizing high-frequency PCB substrates and specialized RF test equipment. The project is based in Warner Robins and requires the contractor to hold AS9100 or ISO 9001 certifications to ensure quality compliance. The final deliverables consist of completed microwave receiver modules and assemblies. The response deadline for this opportunity is November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 2 months

OCONUS Radar Installation and Field TestingThe OCONUS Radar Installation and Field Testing subcontract, issued by the Department of Defense under agency FA8507 Alcmc Eskc, involves the installation of CNWA hardware on 27-meter radars. The scope of work requires the contractor to perform physical installations at OCONUS operational sites for prime contractors on military projects. Following installation, the contractor must conduct a 30-day operational test period utilizing field-deployable RF testing equipment to ensure system functionality. Key requirements include the ability to deploy to overseas locations and the capacity to coordinate effectively with military and national partners. The final deliverables for this project consist of a fully installed operational CNWA system and a comprehensive 30-day test completion report. Interested parties must submit responses by November 18, 2026, for this project categorized under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 2 months

CNWA Fabrication and ProductionThe CNWA Fabrication and Production subcontract involves the manufacture of Cross-Over Network Waveguide Assemblies for prime contractors supporting military radar projects. The scope of work requires precision CNC machining and fabrication of waveguide components and network assembly to meet Form, Fit, and Function replacement standards specifically for 27-meter radar systems. To ensure operational integrity, the production process must utilize RF-grade seals and conductive materials, resulting in the delivery of up to two completed hardware units. Managed by the Department of Defense under agency FA8507 Alcmc Eskc, the project is categorized under NAICS code 334220. Performance of the contract will take place in Warner Robins, Georgia. The solicitation was posted on September 28, 2026, with a response deadline set for November 18, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

RF Performance Testing and CertificationThis subcontract involves performing critical verification and validation testing on fabricated RF Power Distribution Components for prime contractors supporting ALCMC EKSC projects. The scope of work requires conducting specialized technical assessments, including Vector Network Analyzer testing, insertion loss measurement, return loss testing, and power handling verification. To ensure compliance with military RF performance standards, all testing must be performed using Spectrum Analyzers and RF Anechoic Chambers, with all equipment requiring NIST traceable calibration. The project is managed under the Department of Defense through agency FA8507 ALCMC EKSC, with the place of performance located in Warner Robins. The successful contractor will be responsible for delivering comprehensive test reports and performance certifications for three specific units. Interested parties must submit their responses by the deadline of November 30, 2026, to fulfill the requirements of this technical performance and certification contract.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

S-Band RF Component ManufacturingThis subcontract involves the manufacturing of three completed S-Band Radio Frequency Power Divider/Combiner units for the Department of Defense under the ALCMC EKSC project. The scope of work includes precision machining, CNC milling of RF cavities, waveguide fabrication, and the assembly of combiner/divider housings. To ensure high conductivity and performance, the fabrication process requires the use of RF-grade aluminum or copper alloys finished with gold plating. The contract is managed by the Department of Defense through the FA8507 ALCMC EKSC agency, with the place of performance located in Warner Robins. Qualified contractors must adhere to strict quality standards, specifically maintaining AS9100 or ISO 9001 quality management systems. Interested parties must submit their responses by the deadline of November 30, 2026, to fulfill the requirements of this specialized hardware manufacturing effort.

POSTED

DEADLINE

in about 2 months

RF Power Divider/Combiner Engineering ServicesThis subcontract opportunity for RF Power Divider/Combiner Engineering Services involves performing technical design and electromagnetic simulation for prime contractors on ALCMC EKSC S-Band RF projects. The scope of work requires conducting RF simulations using HFSS or CST, performing impedance matching, and executing signal loss analysis to produce technical drawings suitable for fabrication. Engineers must utilize RF simulation software and S-parameter analysis tools to ensure all designs comply with specific S-Band frequency specifications and military-grade RF standards. The final deliverables include a comprehensive technical design package, detailed simulation reports, and fabrication drawings. Issued by the Department of Defense under agency FA8507 ALCMC ESKC, this subcontract is classified under NAICS code 541330. The place of performance is located in Warner Robins, and the solicitation is scheduled to be posted on September 28, 2026, with a response deadline of November 30, 2026. Interested parties must meet the technical requirements for high-level electromagnetic simulation and military standard compliance to successfully fulfill the contract obligations.

Engineering Services

POSTED

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS