Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

OEM-Compliant Machining and Fabrication Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves precision machining and fabrication of critical submarine diesel engine components including pistons, cylinder liners, and fuel injectors, all manufactured to strict FMD-controlled specifications and approved materials to ensure compliance with military-grade reliability and performance standards. Work will be performed in accordance with OEM requirements to maintain the integrity and operational readiness of naval propulsion systems. This subcontract is issued under the NAICS code 332999 for other fabricated metal product manufacturing and is managed by the Naval Surface Warfare Center Philadelphia Division, an entity within the Department of Defense. The place of performance is identified as location 5775, though specific city or state details are not provided. The opportunity was posted on July 27, 2026, and is accessible via the SAM.gov platform, with no set-aside provisions or solicitation number indicated, suggesting it may be a direct award or follow-on effort within an existing program structure.

General Info

Precision machining of submarine diesel engine components to military standards under naval contract.

Agency

Department Of Defense → Nswc Philadelphia DivisionView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

5775, WI, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nswc Philadelphia Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Precision machining and fabrication of submarine diesel engine components such as pistons, cylinder liners, and fuel injectors using FMD-controlled specifications and materials.

Similar Contracts

Same NAICS industry code

Supplier of Raw Materials / Components for Horn AssemblyThe contract is for the supply of critical metal components—including housings, valves, and diaphragms—required for the assembly of military fluid-operated horns, supporting defense-related operational systems. It is issued as a subcontract under NAICS code 332999 and managed by the ASC Commodities Division within the Department of Defense. The solicitation was publicly posted on July 29, 2026, with responses due by August 28, 2026, providing suppliers a four-week window to submit proposals. Performance is expected to align with military specifications for component durability, precision, and reliability under extreme conditions, though specific delivery locations or technical requirements are not detailed publicly. The contract is open to qualified vendors without designated set-aside preferences, and all submissions must be made through the official DIBBS portal referenced in the posting.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

PANEL, VEHICULAR OPE

Solicitation # SPE7LX-26-U-9072

The contract solicitation SPE7LX-26-U-9072 is issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 24 vehicular panels with NSN 2510-01-687-9931 under a Total Small Business Set-Aside, with a unit of issue per each (EA) and a total price of $24.00 per unit. Delivery is required within 89 days, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including individual packaging with QUP=001, use of designated cushioning materials to prevent damage from vibration, and proper immobilization within unit containers. Cushioning must either be die-cut NA material to protect protrusions or weather-resistant fiberboard (JC) secured with tape to each other, not the part, ensuring panels are positioned flat-side down with reinforced tape securing container flaps. Marking must adhere to MIL-STD-129 on both barrier bag and box with no special codes applied. All packaging and preservation methods are prohibited from containing mercury or mercury compounds. The contract mandates compliance with all technical and quality requirements referenced in the DLA Master List, with revisions controlled based on the solicitation issue or award date, as applicable. The solicitation closed on August 13, 2026, and was posted on July 29, 2026, with primary point of contact Theodore Misiolek.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-10HT

The contract specifies the procurement of one SHIM item with NSN 5365-01-569-5357 and part number BACS40R240B480F under solicitation SPE4A6-26-T-10HT, requiring delivery within 20 days FOB origin to Cannon AFB, New Mexico. All supplies must comply with DLA’s packaging specifications per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required and palletization aligned with RP001. Item Unique Identification is waived per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Zero non-conformances are mandated in sample lots unless otherwise stated. The contractor must adhere to all technical and quality requirements referenced from the DLA Master List, including RQ001 for tailored quality provisions and RQ042 for ISO 9001:2015 compliance by both manufacturers and non-manufacturers. Configuration changes require an Engineering Change Proposal or variance request, and government identification must be removed from non-accepted supplies per RQ011. Measuring and test equipment must meet RT001 standards. Delivery is subject to strict quantity precision—no variance permitted—and inspection and acceptance occur at destination. Shipment must use traceable freight methods; parcel post is prohibited. The contract is governed by the DLA Master List revision in effect at the RFP issue date, and all documentation must align with the referenced DFARS and DoD units of issue.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-26-T-290W

The contract is for a nonmetallic hose assembly with a 5/8 inch inner diameter and a length of 62-1/2 inches, identified by NSN 4720-01-186-8681 and part number 28052 from EaglePicher Corp or 9J5197 from Caterpillar Inc. Two units are required to be delivered within ten days under FOB origin terms, with no variance allowed in quantity. The product must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with units packed according to the specified Quantity per Unit Pack and palletized as directed. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. Delivery is to be made to the military facility at Camp Casey, Dongducheon, South Korea, with shipment details governed by DLAD Procurement Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-290W with a required delivery date of July 27, 2026, and the unit of issue is AY. All markings and labeling must reflect the government’s designated point of contact and shipment information, and the item must be shipped without government identification if not accepted.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3730

The contract specifies the procurement of aluminum step ladders with the NSN 5440-00-512-0311 and part number 206106ACS200, requiring a quantity of four units to be delivered within 20 days FOB origin. The ladders must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following DLA packaging guidelines. Delivery is directed to a U.S. Air Force prepositioning site in Al Udeid Air Base, Qatar, with shipping instructions referencing specific DLA procedural notes and using the APO AE 09898 address for parcel posting. The unit price is set at $4.00 per unit, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE8E5-26-T-3730, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026, to be fulfilled by approved suppliers including Louisville Ladder Inc, Bauer Corp, and Green Bull Inc. All items must be shipped using TAC 2, labeled as non-mailable, and tracked under RDD 777 with the assigned project code 9GS TP 2.

Defense Logistics Agency

POSTED

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M4-26-T-291A

A 2-1/2 inch nonmetallic hose, 35 feet in length, is being procured under specification MIL-DTL-22240G with a modified weight test requirement of 500 pounds instead of the standard 650 pounds. The product must comply with stringent quality and technical requirements referenced through the DLA Master List and includes controlled packaging, inspection, and acceptance protocols at origin, with shipment following MIL-STD-2073-1E and MIL-STD-129 standards. The item carries a non-extendable 120-month shelf life classified as Type I (Code W) and must be marked accordingly. Ozone-depleting chemicals and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted and approved, and all substitute materials require prior authorization. The contract mandates full and open competition under a Service-Disabled Veteran-Owned Small Business Set-Aside, with adherence to ISO 9001 and higher-level quality requirements including configuration control, engineering change proposals, and zero-defect sampling per MIL-STD-1916 or equivalent. First article testing is required for one unit, and failure to price this line item will result in no separate charge being assumed. Delivery is due within 333 days FOB origin to the Defense Logistics Agency in San Diego, with no variance allowed in quantity. The procurement is governed by clauses addressing inspection, acceptance, packaging, and transportation, and all documentation and marking must align with current DLA and DoD directives.

FLUID HANDLING DIVISION

POSTED

DEADLINE

WINDOW, VEHICULAR

Solicitation # SPE7LX-26-U-9070

The contract specifies the procurement of 121 vehicular windows under NSN 2510-01-617-8631 and Daimler Truck North America P/N 18-57409-003 through a DLA Direct, CONUS delivery arrangement with a delivery window of 89 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, using QUP 001, preservation method 10, and unit container F2, with marking strictly following MIL-STD-129. The windows must be covered with an easily removable protective film to prevent scratches, and cushioning materials must fully immobilize the product against all impact types, including edge, corner, and side drops, with specialized cut-outs for protrusions. Acceptable cushioning includes MIL-PRF-26514 Type I Class 2 Grade B or C flexible polyurethane foam, or equivalent materials that meet shock absorption and creep resistance requirements determined by static stress and density. Package design must satisfy ASTM D4169 Distribution Cycle 18, Assurance Level II, Acceptance Criteria 3, or provide validated military packaging documentation per MIL-STD-2073-1. Special markings must include FRAGILE, ARROW UP, GLASS, and GLASS DO NOT DROP per MIL-STD-129 and ASTM D5445, and containers must support mechanical handling to avoid discrepancies. Mercury and mercury compounds are strictly prohibited in all packaging and preservation components. The solicitation, issued under SPE7LX-26-U-9070, is a total small business set-aside with a response deadline of August 13, 2026, and is governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with packaging and technical compliance controlled by the revision in effect on the solicitation issue date.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

HOSE ASSEMBLY, METAL

Solicitation # SPE7L4-26-T-5854

The contract is for a single unit of a metal hose assembly with NSN 4720-01-234-3003 and part number 114B355, supplied by STEWART & STEVENSON POWER PRODUCTS LLC. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is allowed. Inspection and acceptance occur at the origin point, and the item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, containment methods, and marking standards. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specified functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, and shipment must follow DLA transportation guidelines, with the freight forwarder and shipping details governed by DLAD PROC NOTES C19 and C20. The contract is issued under solicitation SPE7L4-26-T-5854, with an original required delivery date of July 31, 2026, and the supplier must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

COMPRESSOR UNIT, REC

Solicitation # SPE7M1-26-T-237J

The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SPACER, REACTION, IGNITI

Solicitation # SPE4A7-26-T-600N

The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SPACER, SPECIAL SHAPED

Solicitation # SPE4A7-26-T-599N

The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Fixed Canopy Manufacturing and AssemblyThe contract entails the fabrication, assembly, and rigorous quality assurance of 85 fixed canopies identified by NSN 1560-01-708-2761, requiring full compliance with both military specifications and ISO standards to ensure operational readiness and durability under demanding conditions. The work must be performed at the designated place of performance in Chambersburg, Pennsylvania, with all deliverables subject to stringent inspection and certification protocols to meet defense-grade requirements. This is a subcontract opportunity exclusively reserved for SBA-certified Women-Owned Small Businesses under the WOSB Sole Source Program, ensuring eligibility is restricted to businesses that meet the criteria outlined in FAR 19.15. The North American Industry Classification System code 332999 applies, covering other fabricated metal product manufacturing and reflects the specialized nature of the fabrication process. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, at 9:00 p.m. Eastern Time, with no formal solicitation number issued. The contracting activity is managed under the Department of Defense through the DLA Aviation office in Huntsville, indicating direct support to military logistics and aviation systems. Although no point of contact is listed, interested parties must submit proposals through the SAM.gov platform using the provided link, and all technical, quality, and delivery requirements must be fully addressed to be considered responsive. The contract requires full adherence to federal acquisition regulations and quality control processes, with performance expectations aligned to the Department of Defense’s standards for sustainment and operational use.

Al DLA Aviation At Huntsville

POSTED

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Solicitation # N6449826Q5244

The contract N6449826Q5244 is a Small Business Set Aside issued by the Naval Surface Warfare Center Philadelphia Division under the Department of Defense, with a NAICS code of 336611 indicating it relates to ship and boat building and repairing. The solicitation was posted on July 28, 2026, with a response deadline of August 24, 2026, at 8:00 PM Eastern Time. It is designated as a total small business set aside, meaning only small businesses are eligible to compete. The primary point of contact is Anthony Ricciardi, reachable at 445-227-0100 or anthony.v.ricciardi2.civ@us.navy.mil, and the contracting office is located in Philadelphia, Pennsylvania, with a ZIP code of 19112-1403. The place of performance details are not specified in the provided data. Interested parties must register and submit responses through the SAM.gov portal using the provided UI link.

Ship Building and Repairing

POSTED

DEADLINE

Technical Documentation and Data Management SupportThe contract encompasses the comprehensive management, digitization, indexing, and secure storage of technical repair records, test reports, and associated documentation, ensuring full compliance with Federal Maritime Commission and Navy data control standards. All services are designed to maintain data integrity, accessibility, and security throughout the lifecycle of the records, with strict adherence to military and federal regulatory frameworks governing sensitive technical information. The work is required to be performed in support of the Naval Surface Warfare Center Philadelphia Division, under the Department of Defense, with performance centered at the location identified as 5775. This subcontract falls under NAICS code 541611, classifying it as management consulting services, and is positioned to enhance operational efficiency by transforming legacy纸质 records into a fully digital, indexed, and retrievable system. While specific performance metrics or deliverables are not detailed, the emphasis on FMD and Navy data compliance indicates rigorous standards for authentication, retention, classification, and protection of information. The contract was posted on July 27, 2026, and is accessible through the designated SAM.gov portal for qualified subcontractors seeking to support defense-related documentation modernization efforts.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics and Component Transport ServicesThe contract entails the secure, fully tracked transportation of EDG components across naval ports, FMD facilities, and designated repair sites, ensuring end-to-end accountability through rigorous chain-of-custody protocols. Services include specialized crating, detailed lift planning, and logistics coordination to support the safe movement of sensitive components under strict handling standards. All activities must comply with Department of Defense requirements for security, traceability, and operational continuity in defense-related supply chain operations. This subcontract, issued under the NAICS code 484220 for general trucking and freight transport services, is managed by the Naval Surface Warfare Center Philadelphia Division within the Department of Defense. Performance is focused on the location identified as 5775, though exact geographic specifics are not provided. The solicitation was posted on July 27, 2026, and will require vendors to demonstrate capability in handling high-value defense components with precision, compliance, and real-time tracking throughout the transportation lifecycle.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Specialized Engine Testing and Diagnostics SupportThe contract entails specialized performance validation of emergency diesel generators following repair, with a focus on ensuring mission readiness through rigorous testing protocols. This includes load bank testing to verify under full operational load, detailed emissions analysis to confirm compliance with environmental and safety standards, vibration diagnostics to detect mechanical anomalies, and comprehensive operational data logging to establish baseline performance metrics and track long-term reliability. All work must be executed to stringent technical specifications to support critical defense infrastructure. This subcontract, issued under NAICS code 541380, is positioned within the Department of Defense’s Naval Surface Warfare Center Philadelphia Division and is intended for performance at facility 5775. The solicitation was posted on July 27, 2026, and is part of a broader effort to maintain the readiness and integrity of emergency power systems essential to naval operations. The contractor is expected to deliver precise, documented results that validate the full functionality and durability of repaired equipment under real-world conditions.

Testing Laboratories and Services

POSTED

DEADLINE

Lube Oil System Flushing and Fluid ManagementThe contract requires comprehensive flushing, filtration, and complete replacement of lubrication systems during Emergency Diesel Generator maintenance cycles, with strict adherence to MIL-spec lubricant standards. All operations include removal and safe handling of hazardous waste oil, ensuring proper containment, transportation, and disposal in compliance with environmental and military regulations. The work is critical to maintaining operational readiness and system longevity, requiring trained personnel with expertise in hazardous fluid management and precision lubrication protocols. This subcontract is tied to the Naval Surface Warfare Center Philadelphia Division under the Department of Defense, with performance located at facility 5775. The NAICS code 562910 indicates classification under Remediation Services, reflecting the environmental and hazardous waste management components of the task. The solicitation was posted in July 2026, and all activities must align with federal defense contracting standards, including regulatory compliance for hazardous material handling and documentation of fluid disposal chain-of-custody.

Remediation Services

POSTED

DEADLINE

Rugged Computers, OIPS, Monitors (CGMCS)

Solicitation # N64498-26-SIMACQ-PD-51-0159

The Naval Surface Warfare Center Philadelphia is soliciting rugged computers, OIPS, and monitors for the CGMCS program on a sole source basis from NAG Marine under FAR 13.106, indicating the government intends to engage only one vendor due to unique or exclusive capabilities. The solicitation, identified as N64498-26-SIMACQ-PD-51-0159, was posted on July 24, 2026, with a response deadline of August 10, 2026, at 7:00 PM Eastern Time. The procurement falls under NAICS code 541519 for other computer-related services and will be performed at the Philadelphia, Pennsylvania location with a zip code of 19112. All inquiries must be directed via email to frank.vennell@navy.mil, and no phone calls will be accepted. The contract is being handled by the Department of Defense through the Navy’s Philadelphia division, with Frank R. Vennell listed as the primary point of contact for the opportunity.

Other Computer Related Services

POSTED

DEADLINE

LCC, LHD, LHA, LSD and LPD Ship Class Steam and Diesel Electrical Power Systems Engineering and Technical Support

Solicitation # N6449826Q5148

This contract solicitation is directed at Seaport Engineering MAC holders under specific contracts N6449820D4029 through N6449820D4033 to provide engineering and technical support for LCC, LHD, LPD, LHA, and LSD ship classes during Docking Selected Restricted Availability or Extended Dry docking Selected Restricted Availability periods. The focus is on the engineering and maintenance of steam and diesel electrical power systems for these vessel classes, ensuring operational readiness and system integrity during critical dry dock events. The solicitation is issued by the Naval Surface Warfare Center Philadelphia Division under NAICS code 541330 and is open to qualified MAC holders without set-aside restrictions. Responses are due by August 24, 2026, and the primary point of contact is Thomas Coletti, with secondary support from Steve Green, both reachable via email and phone at the Philadelphia office located at 19112-1403, PA. The work is expected to be performed at various shipyard locations as needed to support docked vessels.

Engineering Services

POSTED

DEADLINE

Boiler Combustion Monitoring System (BCMS) Equipment

Solicitation # 41-0317

The Naval Surface Warfare Center Philadelphia Division is procuring Boiler Combustion Monitoring System (BCMS) equipment through a sole source contract award to JM Canty, INC., utilizing the authority under FAR 6.302, which permits acquisition from a single source due to unique or proprietary circumstances. The solicitation, identified by number 41-0317, was posted on July 23, 2026, with a firm response deadline of August 6, 2026, at 4:00 PM. The equipment is classified under NAICS code 333310 and will be delivered to perform at the agency’s facility in Philadelphia, Pennsylvania, with no set-aside provisions applied to this procurement. All inquiries must be submitted via email to joseph.w.aprile2.civ@us.navy.mil; phone calls are not accepted. The primary point of contact for the procurement is Joseph Aprile, who can also be reached by phone at 267-965-1737 for informational purposes only, with official communications restricted to email correspondence.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Technical Documentation & Drawing ProductionThis contract involves the production and management of technical documentation and engineering drawings, along with design analysis reports, RFI and ECP logs, and presentation materials, all required to meet federal government standards. The work supports the Naval Surface Warfare Center Philadelphia Division under the Department of Defense and is classified as a subcontract with a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The North American Industry Classification System code is 541330, indicating the scope is related to architectural, engineering, and related services. All deliverables must be accurately maintained and submitted in compliance with applicable regulations and technical specifications. The place of performance is designated as 19112, corresponding to Philadelphia, Pennsylvania, and the response deadline for proposals is July 31, 2026, with the solicitation posted on July 22, 2026.

Engineering Services

POSTED

DEADLINE

Cost Estimating & ROM Analysis ServicesThe contract is for the provision of cost estimating and Rom analysis services in support of defense projects, requiring the development of rough order of magnitude estimates, preliminary cost estimates, detailed cost estimates, and comprehensive material lists. Deliverables include formal cost reporting as specified by CDRLs A008, A016, and A022, ensuring accurate and standardized financial documentation throughout the project lifecycle. These activities are essential for informed decision making, budget justification, and fiscal accountability within defense acquisition programs. This subcontract is exclusively reserved for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the North American Industry Classification System code 541611 indicating management, scientific, and technical consulting services. The work is to be performed at a location in Philadelphia with a ZIP code of 19112, under the auspices of the Naval Surface Warfare Center, Philadelphia Division, a component of the Department of Defense. Proposals must be submitted by the deadline of July 31, 2026, and the opportunity was posted on SAM.gov on July 22, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Structural & Floor Loading AnalysisThe contract seeks a qualified small business to perform structural design and analysis for components of a test facility, with specific focus on evaluating floor loading capacities, designing support structures, and ensuring seamless integration of heavy equipment. The work is governed under NAICS code 238110 and is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, ensuring exclusive eligibility for small business concerns. Performance is required at a location with ZIP code 19112, and the work serves the Naval Surface Warfare Center Philadelphia Division under the Department of Defense. All proposals must be submitted by the deadline of July 31, 2026, at 9:00 p.m. Eastern Time, with the opportunity posted on July 22, 2026, and accessible via the SAM.gov workspace link. This subcontract supports critical infrastructure development for defense testing operations requiring precision engineering and compliance with structural integrity standards.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

HVAC & Environmental Control Systems DesignThe contract calls for the design of HVAC and environmental control systems tailored for naval test facilities, specifically to maintain thermal stability, ensure high air quality, and safeguard sensitive equipment within demanding industrial settings. The work is scoped to support critical operations at a location in Philadelphia, Pennsylvania, with performance required to meet stringent military standards for reliability and precision under variable environmental conditions. The systems must be engineered to handle unique challenges posed by naval testing environments, including high heat loads, contamination control, and continuous operational uptime. This is a total small business set-aside under the SBA program, classified under NAICS code 238220 for mechanical contracting, and is structured as a subcontract. The opportunity was posted on July 22, 2026, with a response deadline of July 31, 2026, at 9:00 PM Eastern Time. The contracting activity falls under the Naval Surface Warfare Center Philadelphia Division, a branch of the Department of Defense, emphasizing the federal and defense-critical nature of the project. Interested parties must be certified small businesses eligible for the set-aside and capable of delivering specialized design services aligned with the technical demands of naval test infrastructure.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE