Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Offset Rotary Drill with Operator

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing an offset rotary drill and operator to perform the drilling and installation of railroad steel rails for prime contractors on KYTC Highway District 9 infrastructure projects. The scope of work requires drilling holes 7 to 10 inches in diameter to depths of 40 feet using offset drilling techniques five feet from the tire edge. The operator must be capable of working on slopes up to 15 percent and utilizing a mast jib to install steel rails weighing up to 2,000 lbs. Additional responsibilities include cutting the steel flush and hauling all off-cuts to the State Highway Maintenance Facility. The contract is categorized under NAICS code 238910 and was posted on November 4, 2026, with a response deadline of November 25, 2026. The final deliverable is the successful installation of the railroad steel within the designated project areas.

General Info

Subcontract for offset rotary drilling and railroad steel rail installation for KYTC projects.

Place of Performance

Other, KY, USA

Set-Aside

NONE

Documents

This scope was carved out of RFB-605-2700000210-1.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFB-605-2700000210-1 | Eq Rental Offset Drill w/Operator D-9 - Federal

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyKentucky → KYTC Highway District 9
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs drilling and installation of railroad steel rails for prime contractors on KYTC Highway District 9 infrastructure projects. Drills 7-10 inch diameter holes to 40 feet depth using offset drilling (5ft from tire edge), operates on slopes up to 15%, and uses a mast jib to install rails up to 2,000 lbs. Cuts steel flush and hauls off-cuts to State Highway Maintenance Facility. Delivers installed railroad steel.

Similar Contracts

Same NAICS industry code

More opportunities from Kentucky → KYTC Highway District 9

Same awarding agency

NAICS: 532412
New
SLED
RFB-605-2700000210-1 | Eq Rental Offset Drill w/Operator D-9 - Federal
Solicitation # RFB-605-2700000210-1
Solicitation RFB-605-2700000210-1 is a request for a master ID/IQ agreement for the rental of an offset drill with an operator for the Kentucky Transportation Cabinet (KYTC) Highway District 9. The contractor is required to provide a rotary drill and operator capable of drilling and installing 800 linear feet of railroad steel per eight-hour workday. Technical specifications require a minimum 150 H.P. motor, a compressor rated at no less than 300 CFM, 16,000 pounds of pull-down pressure, and the ability to drill with an offset of at least five feet from the tire edge. The equipment must be capable of operating on a 15% slope and the mast jib must be able to lift and lower steel rails up to 40 feet long and 2,000 pounds in weight. The contract will be awarded based on best value using a ranking approach, with price as the primary evaluation factor. Awards are made by group, requiring vendors to bid all lines within a group to be considered. Compliance requirements include adherence to the Build America, Buy America Act, Davis Bacon Act wage determinations, and KYTC Standard Specifications for Road and Bridge Construction. Bids must be submitted electronically via the Kentucky Vendor Self Service portal by November 25, 2026. Payment is processed within thirty working days of invoice acceptance, and the contractor is responsible for maintaining specific insurance coverages and adhering to MUTCD traffic control standards.
Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 532412
New
SLED
RFB-605-2700000207-1 | Eq Rental Offset Drill w/Operator D-9 - State
Solicitation # RFB-605-2700000207-1
Solicitation RFB-605-2700000207-1 is a request for a master agreement to provide an offset drill with an operator for the Kentucky Transportation Cabinet Highway District 9. The scope of work involves drilling and installing railroad rails in double row arrangements through embankment material and bedded rock, with a required production rate of 800 feet of railroad steel per 8-hour workday. The equipment must be capable of offsetting at least 8 feet from the carrier vehicle to the center of the hole. The vendor is responsible for providing the operator, site support labor, and necessary equipment, including an acetylene blow torch. The initial contract period runs through December 31, 2027, with a possible extension of up to 90 days. Award is based primarily on price, with the lowest bidder receiving maximum points, though preferences may be given to Kentucky resident bidders and qualified entities. Vendors must comply with OSHA silica exposure standards, 401 KAR 63:010 air quality regulations, and specific traffic management protocols, including a limit on continuous traffic stoppages to 15 minutes. All bids must be submitted electronically via the Vendor Self Service system by November 25, 2026. Payment is generally issued within 30 working days of invoice receipt. The contract is governed by the laws of the Commonwealth of Kentucky, with legal venue in Franklin County.
Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

1 day ago

DEADLINE

in 20 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS