Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Offshore Flight Data Processing System (OFDPS) Communications Gateway (OCG)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract aims to sustain the Offshore Flight Data Processing System (OFDPS) Communications Gateway (OCG), a critical component supporting the collection, transmission, and processing of flight data from offshore operations. This effort ensures the ongoing reliability, security, and functionality of the communications infrastructure that enables real-time data flow between airborne platforms and ground-based systems, vital for air traffic safety and operational efficiency in offshore environments. The work involves maintenance, upgrades, and technical support to meet evolving regulatory and technological standards without disruption to mission-critical services. The contract is forecasted by the FAA’s William J. Hughes Technical Center under the Department of Transportation, with a NAICS code of 334118 indicating a focus on communications equipment manufacturing. There is no set-aside designation specified, and the place of performance details are not provided, suggesting the work may be performed remotely or at multiple locations as needed. Keith Neill serves as the primary point of contact for inquiries, while Deborah Hemphill is designated as the Small Business Specialist to assist with vendor engagement. The contract opportunity was posted on September 24, 2025, and is accessible through the Acquisition Gateway platform for interested parties to prepare for potential future bidding.

General Info

Maintain and upgrade offshore flight data communications gateway for FAA safety and efficiency.

Agency

Department of Transportation → FAA - William J. Hughes Technical Center

NAICS

334118 - Computer Terminal and Other Computer Peripheral Equipment ManufacturingView NAICS

Place of Performance

NJ, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 24

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment of Transportation → FAA - William J. Hughes Technical Center

Contacts2 people available

OfficeN/A

Organization / Agency

Department of Transportation → FAA - William J. Hughes Technical Center

Office AddressN/A

Contacts

Keith Neill

contact@example.gov

Deborah Hemphill

contact@example.gov

Full Description

Show more

Sustain the Offshore Flight Data Processing System (OFDPS) Communications Gateway (OCG).

Similar Contracts

Same NAICS industry code

Manufacturer of Keyboard Support (NSN 7040-01-462-8859)The contract requires the manufacture and delivery of 14 military-specification keyboard support units compliant with DLA technical standards, material specifications, and functional compatibility requirements for NSN 7040-01-462-8859. These units must meet exacting defense-grade criteria to ensure reliable performance in operational environments. The solicitation is structured as a subcontract under NAICS code 334118, indicating it pertains to other computer peripheral equipment manufacturing. Performance is to be completed with delivery to the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002. Responses are due by August 7, 2026, with the request publicly posted on July 31, 2026, allowing potential vendors a seven-day window to prepare and submit proposals. The contracting entity is listed under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, though no specific point of contact or set-aside preferences are indicated.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Defense-Grade Disk Drive Unit SupplyThe contract entails the supply of 153 defense-grade disk drive units identified by NSN 7025-01-642-2507, meeting stringent ITAR and EAR regulatory requirements, MIL-STD-129 packaging and labeling standards, and a zero-defect quality assurance benchmark. These units are critical components for military applications and must be manufactured, tested, and delivered in full compliance with U.S. defense export control and quality protocols. The solicitation is structured as a subcontract under NAICS code 334118, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The posting date for this opportunity is July 31, 2026, and responses must be submitted by August 7, 2026, leaving a seven-day window for qualified suppliers to prepare and submit proposals. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment T & IFO EQ office, indicating the procurement serves a defense logistics or equipment modernization purpose. All submissions must align with the technical, legal, and compliance mandates tied to the NSN and associated defense standards, with no exceptions permitted for non-compliant deliveries. The official submission portal is accessible via the provided DIBBS link.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

KEYBOARD SUPPORT

Solicitation # SPE8EN-26-Q-0064

This contract specifies the procurement of a Keyboard Support item under NSN 7040-01-462-8859, with a quantity of 14 units, requiring delivery within 30 days after order. The solicitation, issued under SPE8EN-26-Q-0064, mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 for the Third-Party Assessment Organization, indicating that cybersecurity protocols and controls are critical to contract performance. The item is subject to Covered Defense Information requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The supplier must adhere to strict manufacturing and marking standards, including application of the manufacturer’s symbol directly on the item's surface per MIL-HDBK-57, while prohibiting markings on bearing surfaces and waiving the symbol requirement for small fasteners. Mercury and mercury-containing compounds are strictly prohibited unless exception applies to functional components like batteries, fluorescent lamps, and specified sensors, with portable devices requiring shock-proof design and secondary containment. Technical data associated with this contract is subject to ITAR or EAR export controls, requiring prior government authorization for any disclosure to foreign persons, even within the U.S., and access is limited to DLA contractors with JCP certification, completed training, and formal approval. All documentation and drawings are accessible through DIBBS during the solicitation window, with sole point of contact being Jennifer Esworthy of the Department of Defense’s Construction & Equipment T & IFO EQ office.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Windows 11 Hardware & Software Upgrade for ScriptPro WorkstationsThe contract requires the supply, installation, configuration, and validation of Windows 11-compatible hardware and software upgrades for ScriptPro’s proprietary pharmacy automation workstations located at the Atlanta VA Medical Center. The scope of work ensures all systems are fully aligned with Windows 11 requirements, maintaining operational integrity and security for critical pharmacy automation functions. This includes replacing or upgrading components as needed to meet compatibility standards, deploying the necessary software, and rigorously validating system performance to guarantee uninterrupted pharmacy operations. The solicitation is classified as a subcontract under NAICS code 334118, with a response deadline of August 6, 2026, and was posted on July 31, 2026. The award will be managed by the Department of Veterans Affairs through the Technology Acquisition Center NJ. While the place of performance is the Atlanta VA Medical Center, specific location details are not provided. The effort is focused on modernizing legacy systems to support secure, compliant, and reliable pharmaceutical automation services for veterans’ healthcare operations.

Technology Acquisition Center Nj (36C10B)

POSTED

DEADLINE

Printer Accessories for RMRO LTRO

Solicitation # 140A0426Q0014

The contract titled Printer Accessories for RMRO LTRO is issued under solicitation number 140A0426Q0014 by the Rocky Mountain Region of the Department of the Interior, with the primary office located in Billings, Montana. The solicitation is classified as a combined action set aside specifically for Indian Small Business Economic Enterprise, targeting qualified Native American-owned small businesses. It falls under NAICS code 334118, which pertains to the manufacturing of computer and peripheral equipment. The opportunity was posted on July 31, 2026, with a response deadline of August 11, 2026, at 2:00 PM Eastern Time. All performance activities are to be carried out by the awardee without a specified physical location, indicating flexibility in fulfillment. Crystal Keys, reachable at 405-933-6016 or crystal.keys@bia.gov, serves as the primary point of contact for inquiries and submission guidance. The full solicitation details are accessible through the SAM.gov portal via the provided link.

Rocky Mountain Region

POSTED

DEADLINE

3610--EQUIPMENT - REPLACE ENGINEERING PLOTTER

Solicitation # 36C24226Q0775

The Department of Veterans Affairs through the 242-NETWORK Contract Office 02 is seeking to replace an engineering plotter for the New York and Brooklyn Campus under a small business set aside contract, identified by solicitation number 36C24226Q0775. The procurement is classified under NAICS code 334118 for Other Commercial and Industrial Machinery and Equipment Merchant Wholesalers and is restricted exclusively to small businesses as part of a total set aside. The presolicitation notice was posted on July 30, 2026, with responses due by 5:00 PM Eastern Time on July 31, 2026. The primary point of contact for inquiries is Contract Specialist Nina Taliferro, reachable via email at nina.taliferro@va.gov or phone at 8046755000, based out of the agency’s office in Albany, New York, with a zip code of 12208. The place of performance is not explicitly defined in the available information but is expected to be at one or both VA campuses in New York and Brooklyn. No details are provided regarding the estimated contract value, technical specifications for the equipment, delivery timelines, inspection or acceptance criteria, payment procedures, packaging requirements, or evaluation factors for award. While the contract is being procured under the Federal Acquisition Regulation framework, none of the specific FAR clauses, sections, or attachments were accessible or provided in the documentation, leaving key contractual terms, representations, certifications, and performance conditions undisclosed.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Manufacture of Medical Software with Language Configuration ToolsThe contract requires the manufacture of a medical software product designed to meet stringent medical and military labeling standards, with deliverables including a user guide on CD, an overlay for automatic version tracking, and comprehensive language configuration tools to support multi-language deployment. The software must be fully compliant with regulatory requirements applicable to healthcare and defense environments, ensuring reliability, security, and interoperability in operational settings. Performance of the work is designated for Loxley, Alabama, with a zip code of 36551-0500, indicating the physical location where deliverables will be produced or delivered. The solicitation falls under the NAICS code 334118, which categorizes it within the manufacturing of medical and dental equipment, and is classified as a subcontract, implying it supports a larger procurement effort within the Department of Defense’s Medical Supply Chain. The posting date is July 30, 2026, with responses due by August 6, 2026, leaving a seven-day window for interested parties to submit proposals. The contract is issued under the DLA BSM system via the DIBBS platform, and while no specific set-aside or point of contact is noted, the involvement of the Department of Defense underscores the critical nature of the software’s intended use in medical and military operations.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Touchscreen Data Entry Device SupplyThe contract is for the procurement and delivery of a commercial off-the-shelf touchscreen data entry device under a subcontract, with the solicitation tied to NAICS code 334118 which pertains to other communications equipment manufacturing. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026, and the place of performance is specified as Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the Department of Defense through the office of Construction & Equipment T & IFO EQ, indicating the device is intended for military or defense-related operational use. Although no specific set-aside designation is listed, the nature of the acquisition as a subcontract suggests it may be part of a larger government-wide procurement effort. Interested parties must submit responses by the stated deadline to be considered for award, and all technical and commercial requirements will be evaluated based on the device’s compliance with commercial off-the-shelf standards and suitability for the stated application.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

ADP Printer Supply and DeliveryA single automatic data processing printer is to be supplied and delivered to Sheppard Air Force Base in Texas, with full compliance required for federal packaging, marking, and hazardous materials standards. The contract, classified as a subcontract under NAICS code 334118, is managed by the Department of Defense through the Construction & Equipment T & IFO EQ organization. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. Performance is specifically designated for the Sheppard AFB location with zip code 76311-2149. All delivery and handling procedures must adhere to applicable U.S. government regulations to ensure safe and compliant procurement.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

A3 and A4 Multi-Functional Device (MFD) Leasing and DeploymentThe contract entails the supply, lease, and deployment of A3 and A4-sized multi-functional printing devices across the continental United States, Washington D.C., Guam, and Puerto Rico, with full logistics support including delivery, installation, and destination acceptance. This subcontract, under the Defense Logistics Agency of the Department of Defense, is categorized under NAICS code 334118 and is intended to equip federal operations with reliable, high-volume printing and copying capabilities, ensuring seamless integration into existing administrative and operational environments. The scope encompasses not only the provision of equipment but also comprehensive service delivery to guarantee functional readiness at all designated locations. Performance is required throughout a broad geographic footprint, covering all U.S. territories and overseas dependencies listed, with no restrictions on vendor size or set-aside status specified. The contract was posted on July 29, 2026, and is administered through the DIBBS system with identifying transaction numbers SP700021D0007 and SP700023F0244. Although no point of contact or specific location details are provided, the contract is structured to support agency-wide printing infrastructure needs with standardized equipment and uniform service protocols, emphasizing reliability, scalability, and nationwide logistical coordination.

Defense Logistics Agency

POSTED

DEADLINE

Ruggedized GPU Supply (RTX PRO 6000 Max-Q)The contract calls for the supply of dual RTX PRO 6000 Max-Q GPUs, each equipped with 96GB of DDR7 memory, specifically ruggedized to meet the demanding environmental conditions of military operations. These units are designed without wireless connectivity or telemetry capabilities to ensure security compliance and operational integrity in sensitive defense applications. All components must adhere to Trade Agreements Act requirements, ensuring the products originate from approved countries and meet federal procurement standards. This subcontract, issued by the Naval Air Warfare Center under the Department of Defense, is classified under NAICS code 334118 and is open for response until August 13, 2026. The GPUs are intended for deployment in mission-critical systems where durability, high-performance computing, and secure hardware configurations are non-negotiable. The place of performance and specific delivery details are not outlined, but the technical specifications and compliance requirements are strictly defined to support defense-grade instrumentation and systems.

Naval Air Warfare Center

POSTED

DEADLINE

CONVERTER, ANALOG TO DI

Solicitation # SPE8EN-26-T-2709

This contract is for the procurement of two analog-to-digital converters, specifically the Siemens AG model 6ES7 231-5PF32-0XB0, identified by NSN 7050-12-402-8100, under solicitation SPE8EN-26-T-2709. The contract requires delivery within 146 days to the designated receiving warehouse in Tracy, California, with delivery terms FOB origin and no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific packaging codes and containment methods. The items must not contain intentionally added mercury or mercury compounds except in narrowly defined exceptions such as batteries, fluorescent lamps, sensors, or weapon systems under NAVSEA specifications, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced in the DLA Master List, and packaging and handling are governed by DLA-specific standards. Delivery is scheduled for January 4, 2027, with an original required delivery date of November 28, 2026. Inspection and acceptance occur at the destination, and all documentation and compliance are subject to the rules in effect as of the solicitation issue date. Contact for inquiries is Jennifer Esworthy at the DLA.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE