Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Screen Spectral Emissivity Display and Data Storage Module

Active

Federal

Response Deadline07/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Shared Services Center is seeking a subcontractor to supply and integrate an embedded hardware-software module capable of real-time spectral emissivity display and non-volatile data storage. The module must be designed for precise, on-screen visualization of spectral emissivity data while reliably storing critical measurements in non-volatile memory to ensure data integrity under demanding operational conditions. This effort is classified under NAICS code 334111 and is intended for integration into NASA systems requiring high-fidelity thermal and material characterization during missions or ground testing. The solicitation opened on July 23, 2026, with a firm deadline for responses on July 28, 2026, at 9:00 PM EDT. Performance location and specific technical requirements are not detailed publicly, but the solution must meet stringent aerospace-grade reliability standards for use in NASA’s operational environments. All proposals must demonstrate proven capability in embedded system design, real-time data processing, and secure data retention technologies.

General Info

Supply and integrate embedded module for real-time spectral emissivity display and secure non-volatile data storage under NASA aerospace standards.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334111 - Electronic Computer ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 09:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and integration of an embedded hardware-software module for real-time spectral emissivity display and non-volatile data storage.

Similar Contracts

Same NAICS industry code

COMPUTER, SPECIAL PUThe Defense Logistics Agency, under the Department of Defense, has issued a solicitation for one unit of a specialized computer system identified by NSN 2541-01-694-4944. This procurement is part of a federal acquisition process with the solicitation number SPE7L3-26-T-133X, published on July 26, 2026, and requiring responses by August 6, 2026. The item is classified under a special purpose computing requirement and is being procured to support a specific operational or technical need within the federal government. The solicitation is open to eligible contractors with no specified set-aside designation, and performance is expected to occur within the United States. Interested parties must submit proposals through the DIBBS portal before the response deadline to be considered for award.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Audio-Video Forensic Workstation Supply and ConfigurationThe contract calls for the supply, configuration, and delivery of high-performance audio-video forensic workstations powered by new commercial off-the-shelf hardware, fully equipped with pre-installed software tailored for forensic analysis. Each workstation must meet strict technical specifications to ensure reliability and performance in demanding law enforcement environments, with all systems undergoing comprehensive compliance testing to verify adherence to required standards. The deliverables include not only the physical hardware but also the seamless integration of specialized software tools necessary for forensic processing of audio and video evidence. This is a total small business set-aside under the SBA program, restricted to qualified small businesses as defined by FAR 19.5, with the NAICS code 334111 aligning the effort to computer and peripheral equipment manufacturing. The opportunity is issued by the ATF’s Acquisitions Management Division under the Department of Justice, with responses due by August 7, 2026. Performance is expected to be conducted at a location identified by the ZIP code 71146. All proposals must demonstrate the ability to deliver fully functional, tested, and compliant systems within the specified timeframe, ensuring readiness for immediate deployment in forensic operations.

ATF | Acquisitions Management Division

POSTED

DEADLINE

Ruggedized Military Computing System IntegrationThe contract entails the design, integration, and delivery of ruggedized mounted computing systems intended for use in ground combat vehicles and command posts, requiring strict compliance with military environmental and cybersecurity standards to ensure operational resilience under extreme conditions. The systems must withstand harsh battlefield environments including vibration, temperature extremes, dust, moisture, and electromagnetic interference while maintaining secure, real-time data processing and communication capabilities. Performance is required at Aberdeen Proving Ground, Maryland, with a response deadline of July 31, 2026, and the solicitation is classified as a subcontract under NAICS code 334111, indicating it pertains to computer and peripheral equipment manufacturing. The contracting entity is the Department of Defense through the W6QK Acc-Apg office, and bidders must be prepared to meet rigorous defense-grade specifications for hardware durability, software security, and integration compatibility with existing military platforms.

POSTED

DEADLINE

Control PC Supply (Windows-Based)The contract calls for the supply of a factory-image Windows PC model CPH3170US to serve as the control system for the Spraytec application, with strict adherence to Navy directive CCB-3415, which explicitly prohibits IT imaging of devices. This requirement ensures the system is delivered in its original, unmodified state directly from the manufacturer, preserving compliance with security and procurement standards. The PC must be fully functional and certified for operation within the designated Spraytec system environment, with no software alterations, third-party installations, or configuration changes permitted prior to delivery. The solicitation is issued as a subcontract under the NAICS code 334111, indicating classification within computer and peripheral equipment manufacturing. The contracting activity is the Naval Supply Systems Command Fleet Logistics Center San Diego, operating under the Department of Defense. The response deadline is set for July 30, 2026, at 7:00 PM, with the proposal due before this date to be considered. The place of performance is identified as location 51585, though specific city or state details are not provided. The contract does not specify any set-aside status, and no point of contact information is available in the provided data.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Supply of Ruggedized Programming Laptop with AccessoriesThe contract calls for the supply of one commercial off-the-shelf ruggedized laptop along with essential accessories including chargers, antennas, and supporting components specifically intended for programming RF emitter systems. The equipment must meet ruggedized standards to withstand harsh operational environments, ensuring reliability in field and mission-critical applications. All items must be compatible with existing RF emitter system architectures and delivered in working condition with full documentation and warranty support. The requirement is issued as a subcontract under a Total Small Business Set-Aside, restricted to small businesses as defined by the SBA, and falls under NAICS code 334111 for computer and peripheral equipment manufacturing. The place of performance is Dyess Air Force Base with a zip code of 79607, indicating the end-user is located within a Department of Defense facility. The solicitation was posted on July 24, 2026, with a firm response deadline of August 11, 2026, at 7:00 PM Eastern Time. The contracting activity is associated with FA4661 7 Cons Cd under the Department of Defense, though the office address details are incomplete. Subcontractors must be prepared to fully comply with all technical specifications and delivery timelines required for integration with military RF emitter systems. While no point of contact is listed, interested parties must submit proposals through the designated SAM.gov platform using the provided UI link. The procurement emphasizes the use of commercially available ruggedized technology to ensure cost-effectiveness while maintaining mission-ready performance standards.

FA4661 7 Cons Cd

POSTED

DEADLINE

Energy-Efficient Electronics SupplyThe contract titled Energy-Efficient Electronics Supply mandates the provision of computers, monitors, printers, and servers that comply with Energy Star and federal energy efficiency standards, ensuring all delivered equipment meets strict environmental performance criteria. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, with the NAICS code 334111 specifically identifying the industry as computer and peripheral equipment manufacturing. The opportunity was posted on July 24, 2026, with responses due by July 29, 2026, at 2:00 PM, and the place of performance is designated as El Paso, Texas, with ZIP code 79903. The contracting activity is managed by the Mission Support Contracting Division under the Department of Homeland Security, and while no point of contact details are provided, the opportunity can be accessed via the SAM.gov platform for further submission details.

Mission Support Contracting Division

POSTED

DEADLINE

Registered MemoryThe Naval Research Laboratory intends to award a sole source purchase order to MICROWAY for a 64GB DDR5 6400 MHz ECC/Registered Memory Upgrade, concluding that no other source can satisfy the agency’s requirements. This procurement will be conducted under Simplified Acquisition Procedures in accordance with FAR 12.201-1, as the estimated value does not exceed the $350,000 threshold. The transaction is classified under NAICS code 334111 with a size standard of 1250 employees and uses FSC/PSC 7B20 for procurement tracking. Although the notice is labeled as a Special Notice and identifies a Total Small Business Set-Aside, the intent is explicitly sole source, meaning no competition is planned unless compelling evidence is submitted demonstrating that competition would benefit the government. Interested vendors have fifteen calendar days from the notice’s publication to provide clear and convincing justification for competition, but any submission will not entitle them to reimbursement for associated costs. The point of contact for all inquiries is Richard Key, reachable at richard.a.key2.civ@us.navy.mil, and correspondence must reference the solicitation number N0017326Q5261. The response deadline is July 28, 2026, and the place of performance is Washington, D.C., with the agency operating under the Department of Defense.

Naval Research Laboratory

POSTED

DEADLINE

Next Generation Mounted Family of Computer Systems (MFoCS) Request for Information (RFI)The U.S. Army is conducting market research through a Request for Information (RFI) to identify Commercial Off-the-Shelf (COTS) or Non-Developmental Items (NDIs) that can serve as next-generation solutions for the Mounted Family of Computer Systems (MFoCS), a critical hardware backbone for ground combat vehicles and command posts. The MFoCS program supports over 100,000 vehicles with ruggedized, cyber-hardened computing platforms that integrate high-definition touch displays, increased RAM, and solid-state storage to enable real-time data processing and information superiority in multi-domain operations. This RFI seeks industry input on existing or near-term viable solutions that meet stringent environmental, cyber, and interoperability standards, including compliance with the Mounted Mission Command Environmental and Quality Control Specification v1.5, Federal Information Processing Standards, NIST 800-171 and 800-53, and NDAA restrictions on telecommunications and semiconductor sourcing. Respondents must demonstrate their product’s ability to function reliably in extreme combat conditions, support both Secret and controlled unclassified information, include Trusted Platform Module 2.0, dual SSD bays with data retention capabilities, military-grade GPS with secure key management, and provide detailed specifications on size, weight, power, cooling, and compute performance. Responses are due by 2:00 PM Eastern Standard Time on July 27, 2026, and must be submitted exclusively via email to the designated government points of contact. All submissions must be unclassified and cannot include proprietary information, as the government will not accept or reimburse such data. Access to the critical Interface Control Document, essential for demonstrating drop-in compatibility with existing MFoCS systems, requires prior clearance for ITAR-controlled and Distribution Statement D documents, including an active DD Form 2345, DDTC registration, and matching CAGE and SAM.gov records. Companies must provide comprehensive details on their business profile, supply chain resilience, production capacity, minimum sustaining rates, lead times, pricing structures, licensing terms, and support for existing Army maintenance and provisioning tools. The RFI is purely for information-gathering purposes; no solicitation, proposal submission, or contractual obligation is implied or promised. Any future procurement will be announced separately on Sam.gov, and non-response to this RFI will not disqualify a vendor from future opportunities. All submissions become government property and will not be returned.

POSTED

DEADLINE

AJAG COURTROOM IT EQUIPMENTThe contract titled AJAG COURTROOM IT EQUIPMENT seeks to upgrade the OJAG courtroom by integrating multiple existing displays while enhancing the audio systems, control systems, and video conferencing equipment to modern standards. All equipment and components must be installed as specified with no substitutions permitted, ensuring full compliance with the original technical requirements. The solicitation is issued by the Navy Supply Systems Command Fleet Logistics Center Norfolk under the Department of Defense, with a NAICS code of 334111 for electronic computer manufacturing. The opportunity was posted on July 24, 2026, and responses are due by July 30, 2026, at 2:00 PM Eastern Time. The primary point of contact is Marvin Branch, reachable via phone at 771-229-3547 or email at marvin.t.branch2.civ@us.navy.mil. Performance will occur at the Washington Navy Yard in the District of Columbia, though the contracting office is located in Norfolk, Virginia, with a ZIP code of 23511-3392. This solicitation is open to eligible contractors without set-aside designation and must be submitted through the SAM.gov platform.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

DA10--Notice of Intent to Sole SourceThe Department of Veterans Affairs intends to award a sole source contract to TechAnax LLC for faxing services supporting the VA Long Beach Healthcare System and its Community Based Outpatient Clinics, citing uniqueness and specialization as grounds for restricting competition under 38 U.S.C. 8127(b). The contract, identified under NAICS code 334111, is classified as a Business Application/Application Development Software-as-a-Service procurement and will serve as a temporary bridge while a new contract is finalized, with performance spanning from August 31, 2026, to September 30, 2026, at the Tibor Rubin VA Medical Center in Long Beach, California. TechAnax LLC is recognized as the exclusive small business distributor of Cleo Communications’ faxing technology, and the government asserts that no other entity possesses the required capabilities to meet the technical and operational demands of the service. This notice is not a solicitation and does not invite competitive bids; it serves solely as a public announcement to allow potential offerors to demonstrate why full and open competition would benefit the government, with responses due by 5:00 PM PDT on August 7, 2026. All submissions must be emailed to Contract Specialist Dyne Kim at dyne.kim@va.gov, and no telephone inquiries will be accepted. The contract is being executed under the Simplified Acquisition Threshold, with the sole justification relying on the proprietary nature of the Cleo Communications platform and TechAnax’s authorized distribution rights. The agency’s office handling this procurement is located in Gilbert, Arizona, and the solicitation number is 36C26226P1279, with full documentation referenced in the attached FAR 12 Single Source Justification.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Audio Visual Forensic WorkstationsThe contract titled Audio Visual Forensic Workstations is a combined solicitation issued under number DJA-26-ASOD-PR-0243 by the Bureau of Alcohol, Tobacco, Firearms and Explosives within the Department of Justice, specifically through its Acquisitions Management Division. This opportunity is a total small business set-aside as defined by the SBA, targeting vendors classified as small businesses under NAICS code 334111, which pertains to computer and peripheral equipment manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026, at 8:00 PM Eastern Time. The workstations required are designed exclusively for running audio and video forensic software, though detailed technical specifications and requirements are contained in attached documentation. Performance of the contract will occur in Virginia, while the contracting office is located at 20226 in Washington, D.C., with Cameron Davis serving as the primary point of contact and Christian Shepherd as the secondary contact for inquiries. All proposals must be submitted through the official SAM.gov portal linked in the solicitation.

ATF | Acquisitions Management Division

POSTED

DEADLINE

3610--UV32MP Sign Flatbed Printer with Braille ModuleThis contract solicitation, identified by number 36C24726Q0724, is a total small business set-aside under FAR 19.5, issued by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with the Carl Vinson VA Medical Center in Dublin, Georgia designated as both the place of performance and final delivery point. The requirement is for a UV32MP Sign Flatbed Printer equipped with a Braille Module, along with associated components including a 12-month warranty, an ADA/Braille module, and specialized ink, with all items to be delivered within 90 days after receipt of order under FOB destination terms, meaning the contractor bears all costs and risks until delivery. The procurement follows a Lowest Price Technically Acceptable (LPTA) evaluation method, where proposals must first meet all technical requirements—such as compliance with specifications and inclusion of required documentation—before price is considered, with no trade-offs permitted between technical merit and cost. Contract administration is managed by Brenda Carter, Contracting Officer, with payments to be processed electronically via EFT to the Financial Services Center in Austin, Texas, and all invoices must be submitted electronically in accordance with VAAR provisions. The solicitation includes critical compliance clauses requiring adherence to federal cybersecurity mandates, prohibitions on covered telecommunications equipment and services, affirmative action for workers with disabilities, and strict adherence to laws banning kickbacks and unauthorized software. Contractors must provide their Unique Entity Identifier and CAGE code, and any failure to comply with security restrictions triggers mandatory disclosure within 72 hours. The contract incorporates numerous FAR and agency-specific clauses including 52.212-4 for commercial item terms, 52.222-36 for disability employment, 52.240-91 for security prohibitions, and VAAR 852.247-71 for delivery location, while placing no formal requirements on packaging, preservation, or labeling standards beyond traceability through manufacturer part numbers and CAGE codes. No contract value is specified as pricing details are left blank for offeror submission, and no options, contracting officer’s representative, or formal attachments are identified in the documentation. Proposals must be submitted via SF-1449 by the deadline of July 31, 2026, at 3:00 p.m. CDT, with inquiries due by July 28, 2026

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Spare Parts and Cassette Supply (Ongoing)This contract is for the ongoing supply of replacement CR cassettes, digital plates, and related consumables to support the long-term operational needs of imaging systems under NASA Shared Services Center. The work is designated as a subcontract with a NAICS code of 423490, indicating it involves wholesale trade in medical, dental, and hospital equipment and supplies. Performance will be carried out at Edwards, California, with a zip code of 93523. The opportunity was posted on July 24, 2026, and responses are due by July 29, 2026, at 9:00 PM Eastern Time. The contract aims to ensure uninterrupted system functionality by providing critical components necessary for continued imaging operations, focusing on sustainment rather than initial delivery. Specific point of contact information is not provided, and no set-aside classification is indicated for small business or other preferences.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Onsite Installation, Training, and Acceptance TestingThe contract involves the physical installation of a CR system at NASA Armstrong, located in Edwards, California, with a zip code of 93523. The work includes full hardware setup, software calibration, and comprehensive training for government personnel on the proper operation and routine maintenance of the system. All tasks must be performed on-site to ensure seamless integration and functionality within NASA’s existing infrastructure. The installation and training components are critical to enabling the government team to independently manage the system post-acceptance. The contract is classified as a subcontract under NAICS code 811212, with a posted date of July 24, 2026, and a response deadline of July 29, 2026. The contracting organization is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration. No set-aside information is specified, and the place of performance is strictly limited to the Edwards location. The recipient is expected to deliver a fully operational system supported by trained personnel who can sustain its performance without external assistance.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Diagnostic Software and Workflow Integration SupportThe contract seeks installation and configuration of Carestream-based software to align with Department of Defense digital radiography standards and existing nondestructive inspection workflows at NASA’s Armstrong Flight Research Center in Edwards, California. The effort focuses on ensuring seamless compatibility between the software and current NDI systems, enabling accurate, reliable, and secure digital radiographic imaging within DoD-compliant frameworks. This integration is critical to maintaining operational continuity and data integrity across mission-critical inspection processes. The work is designated as a subcontract under NAICS code 541512, indicating it pertains to computer systems design services, and is managed by the NASA Shared Services Center under the National Aeronautics and Space Administration. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, at 9:00 PM EDT. Performance of the contract is limited to the Edwards, California location, where the software will be deployed and validated within the facility’s existing infrastructure, requiring precise technical coordination with on-site NDI teams and adherence to established DoD digital imaging protocols.

Computer Systems Design Services

POSTED

DEADLINE

Computed Radiography (CR) System Supply and IntegrationThe contract entails the supply and delivery of a complete Carestream INDUSTREX HPX-1 Plus Computed Radiography system designed for digital radiography inspection of aerospace components, including the reader, dedicated PC, imaging cassettes, and all necessary tools for operation and integration. This system is intended for use in high-precision non-destructive testing applications, ensuring accurate imaging and analysis of critical aerospace parts to meet stringent industry and NASA safety standards. The equipment must be fully functional, properly calibrated, and ready for immediate deployment upon delivery to the specified location. The system is to be delivered and integrated at Edwards, California with a zip code of 93523, where it will support NASA's inspection and quality assurance workflows. The contract is classified under NAICS code 334510, indicating its alignment with manufacturing of electronic and precision instruments. As a subcontract, it is linked to a larger procurement effort managed by the NASA Shared Services Center under the National Aeronautics and Space Administration. The solicitation was posted on July 24, 2026, with responses due no later than July 29, 2026, at 9:00 PM Eastern Time, making the timeline narrow and the submission process time-sensitive. All deliverables must meet technical and regulatory requirements for aerospace applications without deviation.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Mechanical Installation and Site PreparationThe contract entails the on-site mechanical installation, leveling, and utility connections for a braiding machine at NASA Langley’s facility in Hampton, Virginia, with a required zip code of 23681. Work includes establishing proper alignment and foundation support for the equipment, as well as connecting all necessary power and pneumatic utilities to ensure full operational readiness. Final inspection will be conducted to validate compliance with performance and safety standards prior to handover. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and falls under NAICS code 238990 for other construction-related services. It was posted on July 24, 2026, with a mandatory response deadline of July 29, 2026, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Export Compliance and Regulatory SupportThis contract requires full compliance with International Traffic in Arms Regulations and Export Administration Regulations, encompassing the proper classification of controlled items, acquisition of necessary export licenses, and preparation of accurate duty-free entry documentation. The work involves ensuring all export activities adhere to federal regulatory standards to prevent unauthorized dissemination of sensitive technology and maintain legal compliance throughout the supply chain. The contract is a small business set-aside under the SBA program, designated for total small business participation, and is associated with NAICS code 541618 for other scientific and technical consulting services. It is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required in Hampton, Virginia, ZIP code 23681. Bids must be submitted by July 29, 2026, and the opportunity was posted on July 24, 2026, with no specific point of contact listed.

Other Management Consulting Services

POSTED

DEADLINE

Operator Training and Factory Backup SupportThis contract pertains to the delivery of operator training and ongoing factory backup support for a braiding machine, encompassing the development and provision of comprehensive training materials and continuous technical assistance to ensure seamless operation and maintenance. The scope includes equipping personnel with the necessary skills to effectively utilize the equipment and providing sustained on-site or remote support to address operational challenges and minimize downtime. Training components are designed to be practical and thorough, aligned with industry standards and the specific requirements of the braiding machine technology. The contracting activity is a subcontract under a Total Small Business Set-Aside, designated under NAICS code 611430, and is being managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Performance is required at a facility in Hampton, Virginia, with a ZIP code of 23681. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026. The contract is structured to prioritize small business participation and emphasizes long-term operational readiness through hands-on training and reliable technical support.

Professional and Management Development Training

POSTED

DEADLINE

Technical Documentation and System Design SupportThe contract requires the preparation of detailed mechanical, electrical, and pneumatic system drawings along with comprehensive site requirements and system design documentation to support NASA’s pre-award review process. The work is focused on delivering technical documentation that ensures compliance with NASA’s engineering and operational standards, particularly for systems that will be evaluated prior to formal contract award. Deliverables must reflect precision and thoroughness to enable effective technical assessment and risk mitigation during the review phase. This is a total small business set-aside under NAICS code 541330, designated for engineering services, and is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration. The place of performance is firmly located in Hampton, Virginia, with a zip code of 23681. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, indicating a very tight turnaround window. The contract type is a subcontract, meaning the awardee will be working under a prime contractor’s arrangement to fulfill NASA’s technical documentation needs.

Engineering Services

POSTED

DEADLINE

Braiding Machine Supply and IntegrationThe contract seeks the supply, configuration, and delivery of a braiding machine system that meets brand-name or equivalent specifications, featuring programmable controls, precise tension management, and compatibility with a variety of mandrel shapes to support complex composite manufacturing. The system must be fully integrated and ready for operational use upon delivery, ensuring seamless adoption into existing production workflows. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small business concerns, and is classified under NAICS code 333243 for industrial machinery manufacturing. The offering is issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Hampton, Virginia, zip code 23681. Subcontractors must submit responses by the deadline of July 29, 2026, to be considered for award. While no specific point of contact is listed, all inquiries and submissions must adhere to the requirements outlined in the public solicitation posted on SAM.gov. The machine system is critical to NASA’s composite materials development and fabrication efforts, necessitating high reliability, repeatability, and adaptability to advanced aerospace component geometries.

Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

DEADLINE

SCBA Breathing Air Line InstallationThe contract is for the installation of a SCBA-compatible breathing air line designed to extend to the ladder tip, enabling firefighters to maintain a continuous and reliable supply of breathable air during elevated operations. This system is critical for ensuring responder safety when performing tasks at height, eliminating the need to rely solely on portable SCBA tanks and reducing the risk of air supply interruption during emergencies. The work must be executed to strict technical standards that guarantee compatibility with standard SCBA equipment and structural integrity under operational stress. The solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332999 for other fabricated metal product manufacturing. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, with performance required at Stennis Space Center in Mississippi, zip code 39529. While no set-aside details or point of contact information are specified, the scope clearly targets qualified subcontractors capable of delivering engineered breathing air systems for high-risk firefighting environments.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Rescue Tool Mounting System (Pac Mounts & Carousel Mounts)The contract involves the supply and installation of specialized mounting systems for rescue tools, specifically Pac Mounts for hand tools and carousel mounts for Hurst/TNT e-tools, to ensure secure and easily accessible storage aboard fire and rescue vehicles. These mounting solutions must meet rigorous operational standards to support rapid deployment in emergency scenarios while maintaining tool integrity and vehicle space efficiency. The work is required at Stennis Space Center, Mississippi, with a delivery and installation timeframe governed by a response deadline of August 3, 2026. The contract is classified as a subcontract under NAICS code 332323, which pertains to metal fabrication, and is being managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. All components must be compatible with existing rescue vehicle configurations and adhere to safety and durability requirements expected in high-stress environments.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Thermal Imaging Camera Supply (FLIR K-85N or Equivalent)NASA Shared Services Center is seeking suppliers to provide FLIR K-85N thermal imaging cameras or an approved equivalent for integration into Ladder/Tower Units used in firefighting and rescue operations at Stennis Space Center. The cameras must meet operational requirements for enhanced visibility in low-light and smoke-filled environments, ensuring safety and effectiveness during emergency response scenarios. This subcontract opportunity has a response deadline of August 3, 2026, and falls under NAICS code 334510 for navigation, measuring, electromedical, and control instruments manufacturing. The equipment will be deployed at a specified performance location in Stennis Space Center, Mississippi, with no set-aside classification applied. All proposals must be submitted prior to the deadline to be considered for award.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE