Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

On-Site Technical Support and System Calibration Services

Active

State & Local

Response Deadline08/26/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive on-site technical support and calibration services for InVeris/Meggitt target systems following repair, encompassing field calibration, precise alignment, software configuration, and performance verification to ensure operational readiness. All tasks must include thorough safety inspections and hands-on training for system operators to maintain compliance and proficiency. The work is to be performed at the location of the equipment, with no specified geographic constraints beyond the state of Florida, and must be completed in accordance with established technical standards. The contract is classified as a subcontract under NAICS code 811212 and is managed by the Florida Department of Military Affairs, with responses due by August 26, 2026.

General Info

On-site technical support and calibration for InVeris/Meggitt systems in Florida, including safety checks and operator training.

Agency

Florida → Department of Military AffairsView Agency

NAICS

811212 - Computer and Office Machine Repair and Maintenance

Place of Performance

FL, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 08:00:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyFlorida → Department of Military Affairs

ContactsNo contacts available

OfficeN/A

Organization / Agency

Florida → Department of Military Affairs

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform field calibration, alignment, software configuration, and performance verification of InVeris/Meggitt target systems after repair, including safety checks and operator training.

Similar Contracts

Same NAICS industry code

Occupational Health SuiteThe Department of Energy’s Office of Fossil Energy has published a forecast for the Occupational Health Suite, indicating a future procurement opportunity under NAICS code 811212, which pertains to medical and diagnostic laboratories. The solicitation is not yet active and remains in the planning phase, with a posted date of August 10, 2026. The anticipated contract will be performed in West Virginia and is categorized under an unspecified set-aside type described as “other,” suggesting potential eligibility for small business participation without a predefined category such as 8(a), HUBZone, or women-owned. The primary point of contact for this opportunity is Brian Halstead, the Small Business Program Manager, who can be reached via email for inquiries related to small business involvement and procurement readiness. No formal solicitation number has been issued and the exact scope, requirements, or timeline for bid submission are not yet available, though interested parties should monitor official DOE channels for updates leading up to the anticipated release.

Office of Fossil Energy

POSTED

about 4 hours ago

DEADLINE

Military Marking, Labeling & Bar-Coding

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Quality Inspection and Acceptance SamplingThis contract mandates a pre-shipment quality inspection using either MIL-STD-1916 or ASQ H1331 zero-based sampling plans to ensure the complete absence of nonconformances for critical and major product attributes. The inspection protocol is strictly designed to achieve zero tolerance for defects, emphasizing rigorous adherence to military and industry-standard sampling methodologies to guarantee product integrity before delivery. The contract is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business Set-Aside, ensuring eligibility and participation by qualified SDVOSB contractors. The solicitation is managed by the Fluid Handling Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code is 811212, indicating the work involves maintenance and repair activities. The solicitation was posted on August 10, 2026, with proposals due by August 21, 2026, and interested parties must respond through the DIBBS platform using the reference number SPE7M326T8157. All bids must comply with the specified zero-defect inspection requirements and the set-aside conditions for service-disabled veteran-owned small businesses.

FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Quality Inspection and Acceptance Support

LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Barcoding and Marking Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

MIL-STD-129 Marking & Barcoding Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Military Marking, Labeling, and IUID BarcodingThe contract requires the application of MIL-STD-129 compliant markings, hazard labels, and 2D Data Matrix IUID barcodes to support Department of Defense asset tracking systems. All labeling must adhere strictly to military standards to ensure proper identification, traceability, and inventory management of assets throughout the supply chain. The work is part of a subcontract and must be completed to meet exacting DoD specifications for durability, legibility, and data accuracy under operational conditions. The performance location is specified as San Diego, California, with a zip code of 92136-5299. The solicitation was posted on August 10, 2026, and responses are due by August 21, 2026. The North American Industry Classification System code is 811212, which corresponds to industrial and commercial machinery and equipment repair and maintenance services, indicating the work involves technical labeling and marking operations rather than manufacturing. This effort is essential to maintaining compliance with DoD logistics and asset tracking requirements across maritime supply chain operations.

MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Installation and Field ServicesThe contract involves the on-site installation of telematics devices across Florida’s statewide fleet, requiring comprehensive field services including diagnostics, secure mounting, proper wiring, device activation, and hands-on user training support. All work must be performed in accordance with state standards and timelines, ensuring seamless integration with existing vehicle systems and operational protocols throughout the state. The project demands qualified technicians with proven experience invehicle telematics and public sector fleet environments to guarantee reliability, compliance, and minimal service disruption. Subcontractors must respond by September 24, 2026, and the opportunity is categorized under NAICS code 811212, reflecting automotive mechanical and electrical repair services. The contracting authority is the Florida Department of Management Services, with all activities taking place across the state’s fleet locations. While specific geographic details are not provided, the scope covers all state-owned vehicles requiring telematics deployment, and successful bidders will be expected to coordinate logistics, maintain documentation, and deliver ongoing support to end users during and after installation.

Department of Management Services

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Bench Repairs and Radio Hardware Refurbishment

Support Services

POSTED

about 9 hours ago

DEADLINE

Onsite Maintenance & Technical Support

250-NETWORK Contract Office 10 (36C250)

POSTED

about 11 hours ago

DEADLINE

Medical Imaging System De-Installation and Removal

Network Contract Office 19 (36C259)

POSTED

about 11 hours ago

DEADLINE

Extended Warranty and Technical Support Services

Albuquerque Area Indian Health Svc

POSTED

about 11 hours ago

DEADLINE

More opportunities from Florida → Department of Military Affairs

Same awarding agency

Supply and Installation of Wear Parts (Tracks, Blades, Teeth)

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Supply of OEM-Compatible Filters and Fluids

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Heavy Equipment Preventive Maintenance & Repairs

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

DMA-SS-27-005 - Beard Equipment

Solicitation # DMA-SS-27-005

This contract, identified as DMA-SS-27-005, is a single-source procurement issued by the Florida Department of Military Affairs for local service and replacement parts for John Deere, Hitachi, and Morbark equipment used at Camp Blanding Joint Training Center. The acquisition is justified under Florida Statutes 120.57(3) and 287.057(3), and Rule 60A-1.045, due to the exclusive availability of required parts and service support from Beard Equipment, making competition infeasible. The estimated value of the contract is approximately $45,000 for the fiscal year, covering maintenance, repairs, filters, fluids, and other consumable supplies critical to the operational readiness of equipment supporting the Integrated Training Area Management program. The place of performance is clearly defined as Starke, Florida, with all work to be conducted on-site at the training center. The solicitation was posted on August 5, 2026, with responses due by August 26, 2026, and submission details are directed to be reviewed in the accompanying PUR7776 document, which contains essential specifications and procedural instructions. No competitive evaluation factors, standardized contract clauses from the Federal Acquisition Regulation, or detailed pricing structures are included, as the process bypasses competition. The primary point of contact is Jennifer Adams, who serves as the main liaison for inquiries and submissions, with additional support personnel identified but not formally assigned roles such as Contracting Officer’s Representative or Procuring Contracting Officer. There are no specified packaging, labeling, inspection criteria, or formal acceptance protocols outlined, and no information is provided regarding payment methods, accounting codes, or vendor certifications such as UEI or CAGE codes. The procurement is administered as a non-competitive, single-source action under state statutes without federal contractual frameworks, and all deliverables are focused on sustaining equipment functionality through authorized service and OEM-compatible parts.

POSTED

DEADLINE

Supply of Proprietary Spare Parts for Meggitt Target SystemsThe contract seeks a subcontractor to supply OEM or authorized replacement components for InVeris/Meggitt target systems, including critical parts such as motors, controllers, sensors, and wiring harnesses. The scope requires the provider to ensure all parts meet original equipment specifications and includes comprehensive kitting and logistics support to facilitate seamless integration and operational readiness. The services must be performed in compliance with applicable quality and supply chain standards to maintain system performance and reliability. The contract is issued under the NAICS code 423690 and is categorized as a subcontract by the Department of Military Affairs in Florida. It was posted on August 5, 2026, with a response deadline of August 26, 2026. No set-aside designation or specific place of performance details are provided, and the solicitation number is not available. All proposals must be submitted through the Florida Marketplace vendor portal by the stated deadline to be considered.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

Repair and Maintenance of Electronic Target Systems (MITs, MATs, SITs, SATs)The contract requires comprehensive repair, maintenance, calibration, and diagnosis of electronic moving and stationary target systems used in military training ranges, specifically those based on InVeris/Meggitt technology. This includes servicing control systems, actuators, sensors, and power units that enable precise target movement and response during live-fire training exercises, ensuring operational readiness and reliability under field conditions. All work must adhere to strict military standards to maintain system accuracy and safety during high-stress training environments. The solicitation is classified as a subcontract under NAICS code 334511, with a response deadline of August 26, 2026, and was posted on August 5, 2026. The contracting authority is the Florida office of the Department of Military Affairs, and performance will occur at locations associated with Florida’s military training infrastructure, though specific addresses are not provided. There is no set-aside designation, and the contract is open to eligible subcontractors capable of supporting the specialized electronic target systems used across multiple training range configurations, including MITs, MATs, SITs, and SATs.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DMA-SS-27-003 - InVeris Training Solutions

Solicitation # DMA-SS-27-003

The Department of Military Affairs of Florida is procuring maintenance and repair services for proprietary Meggitt Target Systems at Camp Blanding Joint Training Center under a sole-source solicitation numbered DMA-SS-27-003, issued on August 5, 2026, with responses due by August 26, 2026. The contract, valued at an estimated $225,000, will serve a performance period from August 27, 2026, through June 30, 2027, to ensure operational readiness of mobile and stationary infantry and armored targets used in live-fire training. The acquisition is justified under Florida Statutes 120.57(3) and 287.057(3) due to InVeris Training Solutions being the exclusive provider of parts, technical support, and maintenance for the Meggitt system, eliminating competitive alternatives. No formal evaluation factors, contract clauses, or pricing line items are detailed in the available documentation, as the procurement bypasses competitive procedures entirely. The place of performance is firmly established at Camp Blanding in Starke, Florida, with all inspection and acceptance taking place on-site. The primary point of contact for inquiries is Jennifer Adams, who serves as the administrative liaison, while oversight responsibilities are assigned to the DMA Purchasing Director and the CBJTC Operations Officer. The attachment PUR7776 contains the full single-source justification but is not included in the provided materials. No packaging, marking, preservation, or invoicing requirements are specified, nor are any representations, certifications, options, or special contract clauses such as OCI mitigation, key personnel requirements, or security clearances identified. Payment details, accounting codes, and formal contract type designations are also absent, indicating a streamlined administrative process focused on compliance with state procurement rules and technical necessity rather than structured federal acquisition protocols.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

SIM-AED Audio Effects Remote System SupplyThe contract pertains to the supply of ruggedized SIM-AED audio systems designed to replicate realistic battlefield sound environments, including gunfire and explosions, for military training purposes. These systems must support remote activation and integrate precise geolocation capabilities to enable dynamic, location-based audio cues during exercises, ensuring enhanced realism and operational effectiveness. The equipment is required to withstand harsh environmental conditions typical of combat training scenarios, with durability and reliability as critical performance criteria. The solicitation is classified as a subcontract under NAICS code 334310, indicating involvement in communications equipment manufacturing. It is issued by the Department of Military Affairs, Florida, with a response deadline of August 26, 2026. While specific performance locations and funding details are not provided, the emphasis on battlefield simulation implies delivery and implementation will occur across Florida training facilities or operational zones. The system must meet stringent technical specifications for audio fidelity, synchronization, and remote control functionality, with vendors expected to demonstrate proven experience in defense-grade audio simulation technologies.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Smoke Effects Devices SupplyThe contract seeks the supply of remotely triggered smoke-generating devices designed to synchronize with OPCON’s simulation network, enabling realistic replication of battlefield obscurant conditions for military training exercises. These devices must operate with precision timing and reliability to ensure seamless integration into live-fire and tactical simulation environments, enhancing training fidelity without compromising safety or operational integrity. The technology must be compatible with existing simulation infrastructure and capable of being triggered remotely across varied terrain and environmental conditions. The solicitation is classified as a subcontract under NAICS code 334519, with a response deadline of August 26, 2026, and was posted on August 5, 2026. The issuing agency is the Department of Military Affairs in Florida, and while specific location details for performance or contact are not provided, proposals must meet technical specifications for synchronization, durability, and remote operational control. Vendors are expected to demonstrate proven capability in delivering similar systems, adherence to military-grade standards, and the ability to support integration with command and control simulation networks. All submissions must be completed via the designated portal prior to the deadline.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Powder Containment Shells (PuCS) ManufacturingThe contract pertains to the manufacture and supply of precision powder containment shells designed to be fully compatible with OPCON’s detonation mechanisms, ensuring consistent, safe, and repeatable explosive simulation effects. These shells are critical components for testing and training applications requiring controlled detonation environments, and the work demands high tolerances and strict quality control to meet operational safety and performance standards. The project is structured as a subcontract under the Department of Military Affairs in Florida, with a North American Industry Classification System code of 332999, indicating it falls under other fabricated metal product manufacturing. The solicitation was posted on August 5, 2026, with a formal response deadline of August 26, 2026, at 8:00 PM, requiring potential suppliers to submit detailed technical and commercial proposals within this window. Place of performance details are unspecified, suggesting the work may be performed at the bidder’s facility or another approved location, with delivery coordinated to meet operational requirements. Competitors must demonstrate proven capability in producing precision metal components for defense or explosive simulation applications, with emphasis on reliability, material compatibility, and adherence to strict safety protocols.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Explosive Blast Simulators SupplyThe contract seeks the supply of manufacturer-specific explosive blast simulation devices designed to integrate seamlessly with OPCON’s existing control systems, enabling realistic detonation effects for military training scenarios. These devices must replicate the sensory and physical impacts of actual explosive blasts without using live ordnance, ensuring safety and repeatability in training environments. The technology must be compatible with current operational systems to allow for immediate deployment and use across training facilities under Florida’s Department of Military Affairs. Submissions are due by August 26, 2026, and the contract is structured as a subcontract under NAICS code 334511, which pertains to the manufacturing of navigational, measuring, electromedical, and electrotherapeutic instruments. The procurement is open to qualified vendors capable of delivering certified, reliable blast simulation hardware that meets stringent military training standards. All equipment must be fully functional upon delivery and integrated without requiring extensive modifications to existing infrastructure. While the place of performance and point of contact details are unspecified, the solicitation is managed through Florida’s state defense procurement portal, requiring vendors to engage via the official online interface.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DMA-SS-27-002 - OPCON Training Solutions

Solicitation # DMA-SS-27-002

This solicitation, DMA-SS-27-002, seeks OPCON Training Solutions equipment and services from a single source under Florida Statutes 120.57(3) and 287.057(3), with justification based on the proprietary and integrated nature of the existing simulation system at Camp Blanding Joint Training Center in Starke, Florida. The contract requires delivery and integration of specialized training devices including Explosive Blast Simulators, Powder Containment Shells, Smoke Effects Devices with Wireless Initiators, and the SIM-AED Audio Effects Remote System, all of which must be fully compatible with current OPCON infrastructure to maintain operational continuity and training realism. The period of performance runs from August 27, 2026, through June 30, 2027, with an estimated contract value of $150,000. No competitive evaluation process is involved; award is driven solely by the necessity of source due to technical uniqueness and legacy system interoperability. All submissions must be received by August 26, 2026, and the primary point of contact for all correspondence is Jennifer Adams of the Florida Department of Military Affairs, reachable via phone or email. While the solicitation references an essential attachment, PUR7776, for detailed specifications, no formal clause structure, pricing line items, packaging standards, inspection criteria, or contractor certifications are provided in the available documentation. There are no stated option periods, security clearance requirements, key personnel designations, or formal invoicing instructions. Contract administration responsibilities fall under the Department of Military Affairs, with Jennifer Adams serving as the primary liaison, though no official Contracting Officer Representative or Contracting Officer is formally identified. The acquisition adheres strictly to state procurement rules and does not invoke standard federal FAR clauses or alternate provisions, reflecting a state-level sole-source process focused on technical necessity rather than competitive bidding.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE