Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Optical Coating and Reflective Finishing

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Optical Coating and Reflective Finishing involves providing specialized reflective coatings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the application of reflective layers to optical mirrors according to Drawing NR 19200 8267783, utilizing either chemical coating or vacuum deposition within a controlled cleanroom environment to ensure all reflectivity standards are met. Performance will take place in Anniston, Alabama, under NAICS code 332812. Due to the nature of the defense work, the selected provider must maintain ITAR and EAR compliance and hold US/Canada Joint Certification Program certification. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

General Info

Subcontract for specialized optical coatings in Alabama requiring ITAR and EAR compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0339.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MIRROR, OPTICAL INSTRUM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized reflective coatings for prime contractors delivering DLA supply contracts. Applies reflective layers to optical mirrors per Drawing NR 19200 8267783 using vacuum deposition or chemical coating in a cleanroom environment. Requires US/Canada Joint Certification Program (JCP) certification and ITAR/EAR compliance. Delivers coated optical mirrors meeting reflectivity standards.

Similar Contracts

Same NAICS industry code

Wiper Ring Supplier (NSN 5330-00-554-0713)This subcontract involves the supply of 19 wiper rings, identified by NSN 5330-00-554-0713, for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected supplier is responsible for manufacturing or sourcing these components using asbestos-free materials in accordance with FED-STD-313. All deliverables must strictly adhere to DLA technical and quality requirements RP001 and RA001, and the provider must maintain compliance with the Buy American and Balance of Payments Program. The contract is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, falling under NAICS code 332812. Delivery of the units is required on a FOB Origin basis. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Nonmetallic Hose Assembly ManufacturingThis subcontract involves the manufacture and supply of 168 nonmetallic hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 3/8 inch inner diameter and a 36.0 inch nominal length, adhering to either Grove part number 7543001470 or Eaton part number FL1315GGG0360. Strict adherence to quality and regulatory standards is mandatory, including Berry Amendment compliance, packaging according to ASTM D3951, and marking per MIL-STD-129. The work is associated with NAICS code 332812 and is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Supply of High-Performance Alloy/Metal for Pump ImpellerThis subcontract involves the supply of high-performance alloy and metal raw materials, specifically casting ingots, bar stock, or forged blanks, to support pump impeller production for the DLA Weapons Support Maritime Supply Chain. The materials must meet the precise metallurgical properties required for NSN 4320016446325 and must be entirely free of mercury and Class I ozone-depleting chemicals. To ensure quality and compliance, the provider is required to deliver certified raw materials accompanied by Material Test Reports and Certificates of Analysis. The contract mandates strict adherence to the Berry Amendment and the Buy American Act. Performance for this requirement is centered in Tracy, California, under NAICS code 332812. Interested parties must submit their responses by November 2, 2026, to support the Department of Defense agency's maritime supply chain objectives.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Supply of High-Grade Steel Stock for Cylinder RingsThis subcontract involves the supply of high-grade raw steel stock for cylinder rings to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The materials must strictly adhere to the specifications outlined in Basic Drawing 80064 4687549, Revision E, and must possess dimensions sufficient for a 14.873 inch outer diameter and 2.990 inch thickness. Performance will take place at Robins Air Force Base. Compliance with DFARS Buy American or Berry Amendment regulations is mandatory for this procurement. Additionally, the supplier is required to provide certified raw steel stock accompanied by Material Test Reports or Certificates of Conformance. The response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Aerospace Primer Application (NADCAP)This subcontract opportunity is for the application of protective primer coatings on structural components for prime contractors supporting the DLA Weapons Support ASC. The scope of work specifically requires the application of one coat of MIL-PRF-23377, Type I, Class C2 primer in accordance with MIL-F-18264. To be eligible, providers must maintain NADCAP approval for coating and painting processes and ensure full compliance with ITAR and EAR regulations. The project is designated as a Total Small Business Set-Aside under NAICS code 332812 and is managed by the Department of Defense. Interested parties must submit their responses by October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Supply of Special Emphasis Metal Bars (Alloy C63200)This subcontract involves the supply of high-criticality Nickel-Aluminum Bronze Alloy C63200 metal bars for prime contractors supporting NAVSUP Weapon Systems Support Mech projects at the Portsmouth Naval Shipyard. The scope of work requires the production of ten 1/2 inch round bars manufactured in strict accordance with ASTM-B150 and ASTM-B249 standards. To ensure quality and compliance, the provider must maintain an ISO-9001 quality system and adhere to Special Emphasis Level I control procedures. Final delivery must include Mill Test Reports and Certificates of Compliance submitted via the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

Supply of Triplex Wedge Clamps for ACSR Service DropThis subcontract involves the procurement and delivery of 18,300 wedge-type clamps with straight bails designed for 6-2 ACSR service drop cable messengers. The hardware must meet specific technical standards, requiring the supply of approved part numbers Hubbell SW7195LB, Reos Ent REWDC-2S, or Reliable 7195. These materials are intended for use by prime contractors or directly for the Nashville Electric Service. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the solicitation timeline, which includes a response deadline of October 28, 2026. The procurement falls under NAICS code 332812 for the supply of these specialized triplex wedge clamps.

Nashville Electric Service

POSTED

DEADLINE

Specialized Casting and Forging for Aircraft ValveThis subcontract involves the supply of raw cast or forged metal blanks for aircraft valves to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must perform casting or forging of metal components to the exact dimensions and material grades specified in the technical data package for NSN 2915-01-454-3062. Essential deliverables include the physical valve blanks along with all necessary material certifications and mill test reports. The project is governed by the Buy American Act and falls under NAICS code 332812. Performance will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of October 28, 2026, to be considered for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Area of Interest (AoI) – Metal Cleaning and Finishing Services

Solicitation # W911KF25SC002-AoI0016

The Army Contracting Command Anniston Army Depot is seeking innovative commercial solutions for depot-level metal cleaning, surface preparation, and finishing services for combat vehicle components. This requirement, issued under solicitation W911KF25SC002-AoI0016, encompasses chemical stripping, alkaline immersion cleaning, and abrasive media cleaning to remove paint, corrosion, scale, and carbon. The scope includes a wide array of plating and coating processes such as anodizing, chromate conversion, black oxide, electroless nickel, hard chrome, zinc, tin, copper, and phosphate. The government anticipates utilizing a Multiple Award Task Order Contract structure to ensure technical redundancy and coverage. Key performance requirements include a strict seven-working-day turnaround time and the contractor's responsibility for the secure pick-up and delivery of parts to and from the depot in Alabama. Offerors must demonstrate significant facility capabilities, including specific tank and oven dimensions, crane clearances, and the capacity to handle high-volume part streams of varying sizes. A rigorous quality assurance approach is mandatory, requiring the ability to perform various ASTM and MIL-SPEC tests, such as salt spray, adhesion, and hydrogen embrittlement, either in-house or through certified laboratories. Evaluation will be based on technical feasibility, the safety and efficiency of cleaning methods, innovation in eco-friendly processing, and the robustness of quality control systems. Additionally, the government will assess the offeror's track record with hazardous material management and compliance with environmental regulations. Interested parties must submit a written Solution Brief by October 28, 2026, including a Rough Order of Magnitude or unit pricing structure for evaluation.

Department Of Defense

POSTED

DEADLINE

Physical Vapor Deposition

Solicitation # CSULB-RFP-00000846

California State University, Long Beach has issued a solicitation, identified as CSULB-RFP-00000846, for Physical Vapor Deposition services. This local government opportunity is open for responses until November 13, 2026, at 2:00 PM PT. The work is designated to be performed in Long Beach, California, within the 90840 zip code area. Interested vendors must access the official bid documents and submit their proposals through the provided third-party procurement portals. It is the responsibility of the applicant to ensure all registration requirements are met and that all relevant addenda are reviewed prior to the submission deadline. All inquiries regarding the specific language or technical requirements of the contract should be directed to the originating agency.

California State University, Long Beach

POSTED

DEADLINE

Supply of Aerospace-Grade Raw Material for Aligning SleevesThis subcontract involves the supply of aerospace-grade raw metal stock or pre-forms intended for prime contractors supporting DLA Weapons Support ASC contracts. The scope of work focuses on providing materials that meet the specific chemical and physical properties required for GE part number 9115M71P01. To ensure quality and safety for critical applications, the provider must deliver full traceability and Mill Test Reports for all materials. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in San Diego. Compliance with the Buy American Act is a mandatory requirement for all delivered stock. Interested parties should note the response deadline of October 26, 2026, for this procurement categorized under NAICS code 332812.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, issued by the Department of Defense for the DLA Weapons Support ASC, involves the supply of raw aerospace alloys for prime contractors. The provider is responsible for sourcing and certifying materials that meet the specific technical data package for Meggitt P/N 131448, ensuring all deliveries include full traceability documentation, Material Test Reports, and Certificates of Conformance. Performance for this contract is centered at Tinker AFB. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332812. A critical requirement of the agreement is strict adherence to the Buy American Act and the Berry Amendment to ensure domestic sourcing. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for Face Plate Assemblies to support prime contractors on aerospace contracts. The scope of work requires strict adherence to MIL-STD-2073-1E (QWP001) for packaging and MIL-STD-129 for marking, specifically including Special Marking Code 32 to denote a 60-month shelf life. Additionally, the provider must palletize all shipments according to RP001 requirements to ensure they are delivery-ready. The performance of these services will take place in Fort Worth, Texas, under NAICS code 488510. Interested parties should note that the response deadline for this opportunity is October 29, 2026.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Specialized Material Supply for Face Plate AssemblyThis subcontract involves the supply of raw materials to prime contractors for the manufacture of Face Plate Assemblies under Defense Logistics Agency aerospace contracts. The supplier is responsible for sourcing materials in strict accordance with TDP Rev C Gen 3 and all applicable reference drawings, with a mandatory requirement to ensure that no Class I Ozone Depleting Chemicals are used in the process. The scope of work includes providing comprehensive material certifications and Mill test reports to verify quality and compliance. All certified raw materials must be delivered directly to the designated fabrication facility located in Fort Worth, Texas. This effort falls under NAICS code 332710 and supports Department of Defense aerospace requirements.

POSTED

about 15 hours ago

DEADLINE

Face Plate Assembly ManufacturingThis subcontract for the Defense Logistics Agency involves the precision fabrication and assembly of 121,000 Face Plate Assemblies. The work must be performed in accordance with TDP Rev C Gen 3 and Basic Drawing 81361 806881-05 Rev F, with the place of performance located in Fort Worth, Texas. The scope of work includes the execution of both Contractor First Article Testing and Production Lot Testing to ensure technical compliance. To qualify for this contract, the provider must maintain SAE AS9100 quality systems and hold CMMC Level 2 certification. The project falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves providing specialized waterproof, greaseproof, and opaque UV-protected packaging for cylinders to prevent material deterioration. The service provider is responsible for applying all necessary markings, including CAGE codes and part numbers, in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverable consists of fully packaged and marked cylinders that are ready for immediate shipment.

Motor Vehicle Towing

POSTED

about 15 hours ago

DEADLINE

Oxygen Cleaning and Hydrostatic Testing ServicesThis subcontract for Oxygen Cleaning and Hydrostatic Testing Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves performing specialized oxygen cleaning, periodic re-hydrotesting, and valve overhauls utilizing hydrostatic pressure testing equipment. All processes must strictly adhere to MIL-STD-1330E standards for the cleaning and packaging of oxygen systems to ensure safety and compliance. The selected provider is responsible for delivering certified clean and hydro-tested cylinders accompanied by detailed test reports. This requirement falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of October 28, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Diving Air Cylinder Assembly SupplierThis subcontract involves the supply of five specialized air cylinder assemblies for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4220-01-451-6470 and Part Number 4059311. Critical compliance requirements include ensuring all assemblies are asbestos-free in accordance with FED-STD-313 and providing a Certificate of Conformance as mandated by FAR 52.246-15. The project falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Valve Hydrostatic Testing and Quality ValidationThis subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Industrial Wear Coating ServicesThis subcontract for Industrial Wear Coating Services involves the application of specialized wear coatings to four 12-inch gate valves for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes surface preparation and coating application in strict accordance with the technical data package, with a specific prohibition on the use of Class I Ozone Depleting Chemicals. Performance will take place in Norfolk, Virginia. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. To ensure quality and security, the provider must maintain ISO 9001 or AS9003 quality standards and strictly comply with ITAR and EAR export control regulations. Responses to this solicitation are due by November 2, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 15 hours ago

DEADLINE

Gate Valve Casting and FabricationThis small business set-aside subcontract through the Defense Logistics Agency involves the primary manufacture of four 12-inch gate valves for prime contractors. The scope of work includes developing tooling for metal casting, casting valve bodies according to specific basic and reference drawings, and performing precision drilling without the use of sealing compounds. The final deliverable consists of four fully machined and identified valve assemblies. Performance will take place in Norfolk, Virginia, under NAICS code 332510. Due to the handling of ITAR and EAR data, the contractor must maintain CMMC Level 2 and JCP certifications. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Aviation-Grade Webbing and HardwareThis subcontract involves the supply of high-strength, flame-resistant aviation-grade nylon and polyester webbing along with corrosion-resistant hardware for prime contractors supporting Defense Logistics Agency aviation life support contracts. The materials must be compatible with Interspiro P/N 460-190-457 and include all necessary material certifications and Certificates of Conformance to ensure strict adherence to Berry Amendment compliance. Managed under NAICS code 313210, the contract focuses on the delivery of raw materials and hardware components with performance taking place in San Diego, California. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

Broadwoven Fabric Mills

POSTED

about 15 hours ago

DEADLINE

Manufacturing of Oxygen Mask Harness AssembliesThis subcontract involves the fabrication of oxygen mask harness assemblies for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the assembly of NSN 4240-01-392-6079 in strict accordance with Interspiro Inc P/N 460-190-457 specifications. To ensure life-support safety, the contractor must conduct rigorous quality assurance testing and adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The project is governed by NAICS code 339113 and mandates full compliance with Berry Amendment domestic material restrictions. Performance will take place in San Diego, California. Interested parties must respond by November 2, 2026, to provide the completed and tested harness assemblies as required by the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Defense Logistics Agency involves providing specialized military-grade packaging, marking, and palletization services for prime contractors. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001:D for palletization. The service provider must utilize MIL-SPEC materials and standardized pallets to ensure all shipments are fully prepared for FOB Origin transport. The opportunity is categorized under NAICS code 493110 and was posted on October 22, 2026, with a response deadline of November 2, 2026. Expertise in DLA packaging standards is mandatory to successfully execute the requirements of this Department of Defense contract.

General Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS