Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Overhaul and Modification of Starter Generator for U.S. Coast Guard Aircraft HC-144

Awarded

70Z03826PA0000313Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Coast Guard is awarding a contract for the overhaul and modification of starter generators used on its HC-144 aircraft, issued under solicitation number 70Z03826PA0000313. The work will be performed at the Aviation Logistics Center located in Elizabeth City, North Carolina, with the place of performance also specified as Elizabeth City, NC, 27909. The contract was posted on May 28, 2026, under NAICS code 336413, which pertains to aircraft engine and engine parts manufacturing. The responsible office is the Department of Homeland Security’s Aviation Logistics Center, with Allison T. Meads listed as the primary point of contact, reachable via email at allison.t.meads@uscg.mil. This award notice indicates a formal completion and payment action has been taken, signifying that a vendor has been selected to perform the necessary maintenance and upgrades to ensure reliability and operational readiness of the HC-144 fleet.

General Info

U.S. Coast Guard contracts overhaul and modification of HC-144 starter generators at Elizabeth City, NC.

Agency

Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)View Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Elizabeth City, NC, 27909, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 28

Award Notice

AwardedSep 12

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Contacts1 person available

OfficeElizabeth City, NC, 27909, USA

Organization / Agency

Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

View Agency Profile

Office AddressElizabeth City, NC, 27909, USA

Contacts

Allison T Meads

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=a5780ed7057b4bd8a2037c59e15b42ee

Similar Contracts

Same NAICS industry code

16--NRP,BOTTLE FE - 36, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QNB30

This contract, identified by NSN 7R-1680-016098991-P8, is for the procurement of 27 units of a flight critical item with delivery terms set as FOB Origin. Due to the critical nature of the item and the limitations of available technical data, the government requires source approval prior to the contract award. Only previously approved sources have been solicited, although new sources may apply by submitting the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures. The government intends to negotiate with a single source under FAR 6.302-1, though it will consider proposals from other responsible sources within 45 days of publication. This is a pre-solicitation notice for supplies or services where FAR Part 12 policies for commercial items are not being utilized. Interested parties must meet all qualification requirements at the time of award, and the procurement is subject to the Buy American Act and various Free Trade Agreements.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Supply of Aerospace-Grade Raw Materials for Yoke Assembly

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Yoke Assembly, Cargo Ramp Lock

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Supply of Flexible Couplings (NSN 1660-00-560-4009)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Supply of Boot Assy, Auxiliary (NSN 1650-01-132-0794)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Manufacturing of Bypass Indicators (Source Controlled/CSI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Assembly and Final Inspection of Bomb Ejector Rack Breeches

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Linear Actuating Cylinder Heads

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Aircraft Stiffener Rib Supplier (NSN 1560-01-648-0809)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

HEAD, LINEAR ACTUATING

Solicitation # SPE4A7-26-T-697N

Solicitation SPE4A7-26-T-697N is a fixed-price request for the procurement of seven linear actuating cylinder heads, identified by NSN 1650-01-110-0251 and TransDigm Inc part number 02-1411. Issued by DLA Aviation, the requirement is categorized under NAICS 336413. The required delivery date is May 18, 2027, with a delivery period of 256 days. Shipping is FOB Origin, and the items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and inspection standards, with both inspection and acceptance occurring at the origin. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Key regulatory requirements include compliance with the Buy American Act and the Berry Amendment, as well as DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Additionally, the government prohibits the use of additive manufacturing for these parts unless specifically authorized.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

CLUTCH SHOE, SET

Solicitation # SPE8E7-26-Q-0315

Solicitation SPE8E7-26-Q-0315 is a simplified acquisition request issued by DLA Troop Support for the procurement of 70 sets of clutch shoes, identified by NSN 4140-01-548-8631. The requirement specifies that each set must contain two clutch shoes rather than one. Eligible part numbers include Hamilton Sundstrand Corporation P/N 1002525-1 and Kihomac Inc P/N 767121-9K. This is a firm fixed price contract with a delivery requirement of 60 days after order, and a need ship date of August 10, 2027. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951, MIL-STD-129, and RP001 for palletization, with DLA technical requirements taking precedence over ASTM standards. Inspection and acceptance will occur at the destination, with supplies delivered to DLA Distribution Depot Hill at Hill AFB, Utah. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, Buy American preferences, and the prohibition of certain foreign telecommunications equipment. Quotations must be submitted via the DIBBS portal by September 20, 2026.

POSTED

about 24 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE4A7-26-T-429Q

Solicitation SPE4A7-26-T-429Q is a fixed-price request for quotations issued by DLA Aviation for the procurement of 14 fluid filter elements, identified by NSN 1650-01-311-5101 and PTI Technologies Inc. part number 7587115. This item is designated as a critical application item. The procurement falls under NAICS code 336413 and requires delivery by September 29, 2027, with terms set as FOB Origin under the First Destination Transportation program. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements and configuration change management. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with a requirement for zero non-conformances if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Packaging must adhere to DLA procurement requirements (RP001) and marking must comply with MIL-STD-129. The solicitation includes various federal and defense clauses, such as the Buy American Act, CMMC Level 2 Self-Assessment, and the use of the Wide Area Workflow system for electronic invoicing. Offers involving additive manufacturing are ineligible for award, and a price evaluation preference is applied to HUBZone concerns.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Same awarding agency

Aviation Detector Component Supplier

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Signal Conditioner Replacement Parts Supply

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Signal Conditioner Overhaul and RFI Restoration

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Aviation Component Supply

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of New Approved Tube Elbows

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Replacement Parts for Actuator Oil Cooler (P/N 8656M2)

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Actuator Oil Cooler Repair and Overhaul

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Kit Drive Caps (Manufacturer CAGE 0B9R9)

New Car Dealers

POSTED

DEADLINE

FRAME ASSY, MR Pylon

Solicitation # 70Z03826QJ0000373

Solicitation 70Z03826QJ0000373 is a request for quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new manufactured commercial Frame ASSY, MR Pylon components. The requirement is for an initial quantity of eight units, with an optional quantity of up to four additional units that may be ordered unilaterally by the government within 365 days of the award. The procurement is unrestricted and will be awarded as a firm-fixed-price purchase order to the lowest priced, technically acceptable offeror. Quotations are due by September 15, 2026, with an anticipated award date of September 16, 2026, and a requested delivery date of December 10, 2026. Technical acceptability requires the provision of new parts with full and clear traceability, a Certificate of Conformance per FAR 52.246-15, and a Certificate of Airworthiness following FAA or EASA procedures. The contractor must also provide PMA documentation and maintain a quality control manual addressing risk management and counterfeit part prevention. Delivery is requested as F.O.B. Destination, and items must be packed to withstand land, air, or sea shipment for one year of warehouse storage, specifically excluding the use of popcorn, shredded paper, Styrofoam, or peanut packaging. The contract incorporates various federal regulations, including Buy American certifications and prohibitions on specific telecommunications equipment.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # 70Z03826QJ0000366

Solicitation 70Z03826QJ0000366 is a request for quotation issued by the Department of Homeland Security's Aviation Logistics Center for the procurement of ten new approved detectors, National Stock Number 6685-01-138-6710, Part Number 1122177. The government may exercise an option for up to ten additional units at the same price and lead time for 365 days following the initial award. This is an unrestricted requirement under NAICS code 336413. The anticipated award date is September 16, 2026, with a requested delivery date of September 20, 2026. Award will be determined using a tradeoff process where non-price factors, specifically technical acceptability and delivery timeline, are more important than price. Technical requirements include the provision of a Certificate of Conformance per FAR 52.246-15 and full traceability to the manufacturer to ensure airworthiness for USCG aircraft. Delivery is evaluated on a confidence scale, with high confidence assigned to delivery within 60 days after receipt of award. All items must be new, and packaging must exclude materials such as Styrofoam, popcorn, and shredded paper. Inspection and acceptance will be performed at the destination by local USCG personnel based on count and condition.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

REPAIR ACTUATOR OIL COOLER

Solicitation # 70Z03826QW0000107

Solicitation 70Z03826QW0000107 is a request for quotation for the repair or overhaul of one oil cooler actuator, part number 8656M2, for U.S. Coast Guard HC-27J aircraft. This requirement is a total small business set-aside under NAICS code 488190, with a small business size standard of 40 million dollars. The contract will be awarded as a firm-fixed price purchase order to the lowest-priced, technically acceptable offeror. Quotations are due by September 9, 2026, at 4:00 p.m. Eastern Time. The selected contractor must be an OEM or FAA 145 repair center capable of providing the necessary technical expertise and engineering data, as the Coast Guard will not provide drawings or schematics. Key requirements include a 25-day turnaround time, the submission of a Certificate of Conformance, and airworthiness documentation such as FAA Form 8130-3. Acceptable shipping terms are limited to F.O.B. Destination or F.O.B. Origin. The scope of work encompasses inspection, cleaning, and repair in accordance with OEM and CMM specifications, including the delivery of a detailed teardown inspection report.

Other Support Activities for Air Transportation

POSTED

DEADLINE

Overhaul of the Wheels, Brakes and associated components to support the HC-144 and HC-27J Aircraft

Solicitation # 70Z03826QL0000083

Solicitation 70Z03826QL0000083 is a combined synopsis and request for quotation issued by the Department of Homeland Security for the overhaul of wheels, brakes, and associated components for the US Coast Guard's HC-144 and HC-27J aircraft. These components are designated as Critical Safety Items, and the services are essential to prevent aircraft grounding. The government intends to award an Indefinite Delivery Indefinite Quantity contract consisting of a one-year base period and four one-year option periods, with a total duration not to exceed five years. Due to the proprietary nature of the parts and safety-critical requirements, the USCG intends to award the contract to the Original Equipment Manufacturer, Meggitt Aircraft Braking Systems. The scope of work requires overhauls to be performed by the OEM or an FAA-authorized OEM center in strict accordance with OEM specifications and the Component Maintenance Manual. Key deliverables include the overhaul of main and nose wheel assemblies and main brake assemblies for both aircraft types. The contractor must provide FAA airworthiness 8130-3 certificates or certificates of conformance with each part and ensure all components are free of hazardous dust such as hexavalent chromium, cadmium, and lead. The closing date for receipt of offers is September 25, 2026, at 4:00 PM EST. Award will be based on the determination of fair and reasonable pricing.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS