This Solicitation opportunity from Department Of Defense was posted on April 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
OZONE TEST KIT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The Ozone Test Kit is a commercial off-the-shelf item specified under solicitation SPE4A0-26-T-2827, requiring compliance with stringent technical, quality, and packaging standards set forth in the DLA Master List of Technical and Quality Requirements. The kit, identified by NSN 6850-01-722-9912, consists of a plastic case containing all necessary components to conduct 30 tests, including activator solution, DPD chlorine ozone reagent, low and high range comparators, and 25 mL sample cups. It is classified as a TYPE I (CODE H) item with a non-extendable shelf life of 12 months and must be packaged and marked in accordance with DLA and FAA requirements, including bare item marking and hazardous communication standards. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, and all Safety Data Sheets and OSHA-compliant hazard labels must be reviewed and approved by technical personnel prior to contract award, with copies submitted to the DLA Aviation HMIRS office. The procurement mandates zero-defect acceptance sampling under MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major and acceptance criteria requiring zero non-conformances unless otherwise stated. Quality assurance is governed by SAE AS9100 as a higher-level requirement, and configuration change management, deviation requests, and removal of government identification from non-accepted supplies are subject to specific DLA procedural controls. The unit of issue is one kit, with a required delivery of four kits within five days of award to Tinker AFB, Oklahoma. The contracting officer and point of contact is Thomas Anderson of the Department of Defense’s Aviation Supply Chain ESOC, and all documentation must align with updated contract data requirements and technical data packages as coordinated among all executing agencies.
General Info
Agency
Contract Value
$368NAICS
Place of Performance
7959 5TH ST DR 17 BLDG 16, TINKER AFB, OK, 73145-9156, USASet-Aside
Awardee
Award Issued Date
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
OZONE TEST KIT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
RQ046: FAA Bare Item Marking Requirements The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. Per coordination with all ESAs, all CSI materials (SPC 01, 03, 05, 06) will be PIC “C” and Higher-Level Quality Requirement to AS9100, QCC First Position will be F, L, or R as applicable. The Purchase Order Text (POT) has been updated to reflect Higher-Level Quality TQ Requirements STO RQ039. Material Masters has been updated as applicable.
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SPE4A0-26-T-2827
SECTION B
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
UNIT OF ISSUE = KIT (KT), ONE KIT EQUATES TO A PLASTIC CASE THAT
CONTAINS COMPONENTS TO PERFORM 30 TESTS.
Ozone — CHEMets Visual Kit COMPONENTS: Activator Solution Pack (V2500SS) Catalog No.: A-2500 DPD Chlorine Ozone PAA (V2513SS) Catalog No.: R-7404 Ozone Round (VC7404SS) Catalog No.: R-7404 Low Range Ozone Comparator Catalog No.: C-7404 High Range Ozone Comparator Catalog No.: C-7405 Sample Cup, 25 mL Catalog No.: A-0013
The K-7404 ozone analysis kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Low and High Range Comparators, Activator Solution, 25 mL sample cup, and NSN/Part Number: 6850-01-722-9912 Quantity: 4 KT Purchase Request: 7016347609QTY: 4 Delivery: 5 days ADO
More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
