Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Packaging and Palletization Services

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging and palletization services that fully comply with Department of Defense standards, specifically aligning with DLA requirements, ASTM D3951 for packaging practices, and MIL-STD-129 for marking and labeling of military shipments. All work must ensure that goods are properly secured, labeled, and prepared for transport in a manner that supports logistics readiness and traceability across the defense supply chain. The services are intended for performance at Joint Base Lewis McChord with a zip code of 98433-5000, and the work falls under NAICS code 423840, which pertains to wholesale trade of agricultural supplies. The contract is classified as a subcontract and was posted on August 2, 2026, with responses due by August 13, 2026. It is managed by the Land Supply Chain division under the Department of Defense and is accessible through the DIBBS platform. There is no set-aside designation indicated, and the point of contact details are not provided within the data. All participants must adhere strictly to the specified technical standards to ensure interoperability, compliance, and mission readiness.

General Info

Provide DLA-compliant packaging and palletization at Joint Base Lewis McChord per ASTM D3951 and MIL-STD-129.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

423840 - Industrial Supplies Merchant WholesalersView NAICS

Place of Performance

JOINT BASE LEWIS MCCH, WA, 98433-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide compliant packaging and palletization services in accordance with DLA requirements, ASTM D3951, and MIL-STD-129 marking standards.

Similar Contracts

Same NAICS industry code

Spares for armament loaders

Solicitation # W8476-267174/A

The Department of National Defence is soliciting spare parts for armament loaders under solicitation number W8476-267174/A, with bids due by September 9, 2026. The requirement encompasses 77 firm quantity items and 88 optional quantity items, all destined for delivery to 25 CFSD Montreal and 7 CFSD Edmonton, with most items duplicated across both locations. Items include gearshafts, hydraulic and water pumps, brake components, bearings, valves, sensors, tires, accumulators, motors, and specialized components for vehicle systems, each defined by GSIN, NSN, part number, and NCAGE code, with substitutions permitted only if equivalent. Delivery is specified under DDP Incoterms 2020, and items must meet stringent packaging and marking standards: U.S.-based suppliers must comply with MIL-STD-2073 and MIL-STD-129, while Canadian contractors must adhere to Canadian Forces Packaging Specification D-LM-008-001/SF-001 and D-LM-008-002/SF-001, including mandatory labeling with manufacturer details, lot numbers, and shelf life dates. All items must have a minimum of 75% of their authorized shelf life remaining upon delivery, as mandated by CFTO D-05-001-001/SF-000, and quality must be maintained under ISO 9001:2015 with inspection records available for audit. Contract award will follow a lowest price Technically Acceptable (LPTA) model, where offers must meet all mandatory technical criteria including correct part numbers and NCAGE codes to be eligible, and only the lowest priced compliant offer will be selected. No contract value has been disclosed, and pricing is to be submitted per item with firm, fixed prices valid for the contract term. An irrevocable option exists for additional quantities to be exercised within 90 days of award. Contractors must certify compliance with anti-forced labor laws, prohibit contingency fees, avoid organizational conflicts of interest, and ensure no goods originate from sanctioned jurisdictions. All submissions must be made electronically via email to a designated address, with proposals structured into four sections including technical, financial, declaration forms, and additional supporting data, and must not exceed 5 MB per email. Debriefings may be requested within 15 working days of award notification.

Department of National Defence

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Military-Compliant Packaging and Labeling ServicesThe contract mandates the provision of packaging and labeling services strictly aligned with ASTM D3951 and MIL-STD-129 standards, ensuring all military logistics requirements are met through proper marking, barcoding, and preservation techniques. This subcontract is designated as a HUBZone Set-Aside, meaning it is reserved for businesses certified as located in Historically Underutilized Business Zones, and is classified under NAICS code 423840, which pertains to wholesale trade of industrial supplies. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires responses to be submitted by August 17, 2026, and the place of performance remains unspecified. All work must comply with federal military packaging regulations to support secure, traceable, and durable supply chain operations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging of a shim in strict compliance with MIL-STD-2073-1E, specifying Clean and Dry preservation designated by Code 10 to ensure the component remains free from contamination and moisture. The item must be enclosed in an open-top box container with cushioning as defined by Code JB, providing adequate protection against physical damage during handling and transport. All packaging materials and methods must meet military standards for durability, preservation integrity, and compatibility with long-term storage or deployment conditions. The packaging must be verified as compliant prior to shipment, and documentation confirming adherence to these specific codes and standards must accompany the shipment. This subcontract is issued under the NAICS code 423840, associated with wholesale trade of industrial equipment and supplies, and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Performance is required at Keesler AFB, Mississippi, with a zip code of 39534. Interested parties must submit their responses by August 10, 2026, with the solicitation posted on August 2, 2026. The contract is not subject to any specified set-aside provisions, and bidders must be prepared to meet all military packaging requirements without deviation, ensuring seamless integration into DoD logistics and supply chains.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Commercial Packaging & Marking ServicesThe contract requires the provision of military-compliant packaging and labeling services for defense-related shipments, with strict adherence to MIL-STD-129 standards for shipment marking and the use of UV-protective materials to ensure durability and environmental resilience under field conditions. All packaging must meet Department of Defense specifications to guarantee proper handling, identification, and traceability throughout the supply chain, particularly for equipment and supplies destined for operational use. The solicitation is classified as a subcontract under NAICS code 423840, associated with the Land Supplier Operations Vehicle Support division of the Department of Defense, with performance expected at Norfolk, Virginia, 23511. Interested parties must submit responses by August 13, 2026, following the posting of the opportunity on August 2, 2026. The contract does not specify a set-aside category and is accessible through the DIBBS system under solicitation number SPE7L326T145D.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of V-Belt (NSN 3030014376084)The contract involves the procurement and delivery of one unit of a V-belt identified by National Stock Number 3030014376084 and part number 0366775, to be supplied in full compliance with Defense Logistics Agency inspection and acceptance standards as outlined in DLA PROC NOTE C19 and C20. The item is intended for delivery to Camp Arifjan in Kuwait and must meet all technical and Quality Assurance requirements mandated by the DLA to ensure operational readiness and safety in military environments. The contract is structured as a subcontract under the Department of Defense, with the Defense Logistics Agency listed as the overseeing agency. The procurement falls under NAICS code 423840, which pertains to the wholesale trade of industrial supplies. Although specific solicitation details and point of contact are not provided, the contract reference is linked through the DIBBS system for transactional tracking and award documentation. The posted date indicates the contract was made available in August 2026, and performance is directed to a single delivery location with no indication of alternative sourcing or set-aside provisions.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Other Manufactured Parts (NSN-based)The contract entails the supply or manufacture of up to 11,489 additional National Stock Numbers covering a range of industrial hardware critical to military operations, including fasteners, hydraulic fittings, electrical connectors, and other related components. These items are essential for maintaining and sustaining military equipment and infrastructure, ensuring readiness and operational capability across defense systems. The work is being executed under a subcontract aligned with the NAICS code 423840, which pertains to wholesale trade of miscellaneous durable goods, and is managed by the Defense Logistics Agency under the Department of Defense. Awarded under contract SPE7LX22D0068 with delivery order SPE7L126FAZ8J, the solicitation was posted on August 2, 2026, and no set-aside provisions or specific geographic performance location are indicated. The nature of the contract implies a broad logistical and industrial support role, with deliverables likely to be distributed across multiple military installations and operational theaters. The absence of point-of-contact details or office address suggests standardized procurement protocols typical of DLA supply chain management, where fulfillment is handled through established vendor networks without localized oversight.

Defense Logistics Agency

POSTED

DEADLINE

Supply of NSN 7540-01-152-8070 (S222-V00010864) – Environmental Monitoring Equipment or ConsumableThe contract involves the procurement and delivery of two units of commercial environmental monitoring equipment identified by NSN 7540-01-152-8070 and manufacturer part number S222-V00010864, previously ordered under CLIN 0017. This is a supply-only requirement for a COTS industrial component specifically utilized in environmental compliance applications, with no installation, customization, or service elements included. The equipment is intended for use in monitoring environmental conditions to meet regulatory and operational standards within defense-related contexts. The solicitation is managed by the Defense Logistics Agency under the Department of Defense, classified under NAICS code 423840 for wholesale trade of industrial supplies, and issued as a subcontract with no set-aside designation. The opportunity was posted on August 2, 2026, and the place of performance and point of contact details are not specified, indicating the delivery location and coordination may be handled through existing logistics channels. The contract reference is linked to award SP450025D0015 with delivery SP450026F6923, and the total quantity required is two units.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Brake Parts Cleaner (NSN: 6850011670678)The contract entails the procurement and delivery of ten units of brake parts cleaner identified by NSN 6850011670678, each packaged in canisters, to meet all Department of Defense shipping, marking, and invoicing requirements. The delivery destination is Fort Drum, New York, and the items must comply with federal and military standards for packaging, labeling, and documentation to ensure seamless integration into the DoD supply chain. The contract is classified as a subcontract under NAICS code 423840, indicating it falls within wholesale trade of industrial supplies, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 1, 2026, and is accessible via the DIBBS system under the referenced contract and delivery identifiers.

Defense Logistics Agency

POSTED

DEADLINE

Tactical Gear and Diving Equipment SupplyThe contract is for the supply of specialized personal equipment including diving apparatus, tactical vests, and survival gear under the NAICS code 423840, which pertains to merchant wholesaler operations for miscellaneous durable goods. It is structured as a subcontract under the Defense Logistics Agency, a branch of the Department of Defense, and was posted on August 1, 2026. The equipment is intended to support operational readiness and is aligned with the prime contractor’s core scope of work, ensuring that mission-critical gear meets stringent military standards for performance and durability. Delivery and fulfillment are expected to occur in support of Defense Logistics Agency operations with no specific place of performance designated, indicating potential worldwide distribution to deployed units and facilities. The subcontract does not carry a set-aside designation and is accessible through the DIBBS procurement portal under contract reference SPE7LX21D0087 with delivery order SPE7LX26FB0P4 and contract number 206742.

Defense Logistics Agency

POSTED

DEADLINE

Non-NSN Industrial Parts Supply & Logistics FulfillmentThe contract entails the procurement, inventory management, and timely delivery of 568,171 non-NSN industrial parts under a requirements-based agreement with the Defense Logistics Agency, a component of the Department of Defense. These items are categorized under NAICS code 423840, indicating wholesale trade of industrial supplies, and will be managed through a subcontract arrangement to ensure continuous supply chain availability. The contractor is responsible for end-to-end logistics including sourcing, stocking, and fulfillment to meet ongoing DLA operational needs without reliance on standardized NSN identifiers. Performance is expected to be responsive and scalable to fluctuating demand across unspecified geographic locations, with all activities aligned to maintain inventory accuracy and delivery reliability. The contract is active from August 1, 2026, and is designated under the DLA contract number SPE7LX26FB0R6 as a follow-on to SPE7LX21D0087.

Defense Logistics Agency

POSTED

DEADLINE

Commercial Fluid Filter Element SupplyThe contract entails the procurement and delivery of a commercial off-the-shelf fluid filter element designated by NSN 4330015172814 to Fort Campbell, Kentucky, under the Defense Logistics Agency, a component of the Department of Defense. The item is to be supplied in full compliance with DLA traceability requirements, ensuring complete documentation and authentication throughout the supply chain from manufacturer to final delivery. All shipping must adhere to DLA standards, including proper labeling, packaging, and transportation protocols to maintain integrity and accountability. This is a subcontract under the NAICS code 423840, which covers wholesale trade of industrial and heavy-duty equipment, and the solicitation is linked to the official DIBBS award record. While the solicitation number and point of contact details are not provided, the posted date of August 1, 2026, indicates the timeline for contract execution. The place of performance is clearly specified as Fort Campbell, KY, and the requirement for full traceability underscores the critical nature of the component in military operations, where reliability and proven provenance are non-negotiable. The contract does not indicate a set-aside classification, suggesting it is open to general eligible suppliers.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fluid Filter Element (NSN: 2940015674018)The contract requires the procurement and delivery of a single military-grade fluid filter element identified by NSN 2940015674018 and Part Number RE536291 to the USS CARL VINSON (CVN 70). All items must adhere to strict military specifications including full traceability throughout the supply chain, proper Department of Defense marking as required, and compliance with the Defense Priority and Allocation System for shipping. The delivery must be completed by August 10, 2026, with no exceptions permitted. The contract falls under NAICS code 423840 and is issued by the Defense Logistics Agency on behalf of the Department of Defense as a subcontract. The requirement is non-negotiable in terms of compliance, and the product must meet all technical, logistical, and regulatory standards expected for use aboard a U.S. Navy aircraft carrier.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Solicitation # SPE7L1-26-T-907C

The contract is for one roll of rubber strip, each roll measuring 50 feet, under the national stock number 5330-01-651-7290, with a purchase request number 7017709123. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag in compliance with MIL-DTL-117, Type II, Class C, Style 1, to protect against ultraviolet degradation, and this packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. The rubber strip must be free of asbestos, and any substituted material must be approved per Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. The item falls under federal supply classifications 5330/5331 and must adhere to MIL-STD-130N for identification marking of U.S. military property. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation number is SPE7L1-26-T-907C, with a response deadline of August 14, 2026, and delivery is required within 20 days after award. The contract is issued by the Department of Defense’s Land Supply Chain under NAICS code 339991, with the place of performance listed as FPO, ZIP 96660, and primary point of contact is Kristina Derry at krisitna.derry@dla.mil.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

BOOT, DUST AND MOIST

Solicitation # SPE7L1-26-T-907V

The contract pertains to the procurement of one unit of BOOT, DUST AND MOIST with NSN 5340-01-725-1393 under solicitation SPE7L1-26-T-907V, requiring delivery within five days of award at origin FOB terms with zero variance in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, material codes, and unit container markings per MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s official requirements, and palletization must follow RP001 guidelines. The product is subject to strict prohibitions against ozone-depleting chemicals, and any substitutions must be pre-approved unless expressly allowed by specifications. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point at Sierra Army Depot in Herlong, California. The contractor must meet all identification and marking requirements per MIL-STD-130N, and the contract incorporates technical and quality standards referenced in the DLA Master List. This is a federal procurement under NAICS 332510 with no set-aside classification, and all data including shipment tracking, point of contact, and contract deadlines are encoded within the DLA systems for compliance and audit purposes.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE7L1-26-T-906Y

The contract specifies the procurement of two self-locking hexagon nuts with an extended washer, identified by NSN 5310-01-598-8901 and part numbers 92461A200 and 3931486C1, classified as a commercial off-the-shelf item. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA’s Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards. The shipment must be sent via traceable means, excluding parcel post, to Fort Bliss, Texas, with mandatory markings per the designated point of contact and shipment identifiers. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. The contract is issued under solicitation SPE7L1-26-T-906Y with a response deadline of August 14, 2026, and the required delivery date is July 31, 2026. The unit price is $2.00 per piece, totaling $4.00, and the contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-908A

The contract includes a requirement for 56 units of a Commercial Off the Shelf (COTS) item identified as E Z LOADER BOAT TRAILERS, INC. with part number 250-017565 and NSN 5340017008576, priced at $56.00 per unit, for a total value of $3,136. Delivery is due within 20 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container specifications, while marking follows MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and the item must be shipped via the designated freight forwarder, V. ALEXANDER CO INC, to the provided shipping address. The solicitation is issued under contract number SPE7L1-26-T-908A with a response deadline of August 14, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510. Technical and quality standards referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

STARTER, ENGINE, ELEC

Solicitation # SPE7L1-26-T-907W

The contract pertains to the procurement of a starter, engine, electrical component with NSN 2920-01-470-9867, issued by the Defense Logistics Agency under solicitation SPE7L1-26-T-907W. Four separate line items each specify one unit at a unit price of $1.00, with delivery required within five days FOB origin, zero quantity variance allowed, and inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including preservation method 41, wrapping with specified material protected from direct tape contact, containment in a vapor-proof barrier bag with heat-sealed closure, and cushioning using weather-resistant fiberboard die-cut inserts designed to immobilize the product, prevent container collapse, and evenly distribute weight to safeguard solder joints and structural elements. The outer container must be reinforced corrugated fiberboard certified by the manufacturer, labeled per MIL-STD-129 with special marking code ZZ indicating an up arrow and “Open This Side,” and palletized according to DLA packaging requirements. Mercury and mercury compounds are strictly prohibited in any phase of preservation or packaging. The product must arrive in serviceable condition and be shipped via traceable freight, with parcel post prohibited. Shipments are directed to two distinct DoD addresses: one at Lewis McChord, Washington for three line items and another at Fort Bliss, Texas for one. Required delivery dates range from March to July 2026, and the contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry as the primary point of contact.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

HOUSING, PANEL, VEHIC

Solicitation # SPE7L1-26-T-907J

This contract pertains to the procurement of a housing panel for vehicle applications under solicitation SPE7L1-26-T-907J, with the NSN 2510-01-687-5387 and a single unit of issue (AY). The item must be delivered within 20 days to a military vessel shipment address at FPO AP 96694-7100, with delivery terms as FOB origin and inspection and acceptance occurring at destination. No quantity variance is permitted. All packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with the DLA Master List of Technical and Quality Requirements taking priority over any conflicting standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by specification. The contract mandates shipment via the fastest traceable means, explicitly prohibiting parcel post, and directs vendors to use the VSM system for routing. The required delivery date is July 28, 2026, and specific tracking details including transport control number, RDD, project code, and signatory are provided for logistical execution. All specifications are bound to the DLA procurement policies, and the point of contact is Kristina Derry at the Department of Defense’s Land Supply Chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906P

This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 11 hours ago

DEADLINE

COVER, HANDLE, DOOR, V

Solicitation # SPE7L1-26-T-907Y

This contract pertains to the procurement of a cover, handle, and door component for vehicular applications, identified by NSN 2540-01-428-6195 and purchase request 7012536527, with a quantity of 1,755 units to be delivered within 90 days from the contract award. The item is designated as a critical application component and must be manufactured using a metal casting process requiring specific tooling; sourcing and engineering support are available through DLA’s Aviation or Land & Maritime Supply Chains. The item must comply with stringent technical and quality requirements drawn from the DLA Master List, with verification levels and acceptable quality levels mandated for critical, major, and minor attributes. Zero non-conformances are required in sampling per MIL-STD-1916 or equivalent zero-based plans, and a Certificate of Conformance is mandatory. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Packaging must conform to MIL-STD-2073-1E, marking to MIL-STD-129 with no special codes, and palletization must follow DLA packaging standards. The item is to be delivered FOB origin with no quantity variance allowed, inspected and accepted at the point of origin. The delivery destination is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 8, 2026. The contract is governed by DLA-specific requirements including configuration change management, inspection protocols, and hazardous materials handling procedures, and was solicited under SPE7L1-26-T-907Y with responses due by August 14, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906R

The contract pertains to the supply of a gasket identified by NSN 5330-01-610-9969 and part number L100212, with a single unit requirement to be delivered within five days of order placement. The item must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, to protect against UV deterioration, and this packaging requirement applies to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. No asbestos is permitted, and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or naval-referenced chemical reagents; when exempted, portable devices must include a secondary containment barrier and meet NAVSEA 5100-003D standards. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 indicating “Do Not Bend,” and palletization must adhere to DLA packaging requirements. The delivery point is FOB origin, with inspection and acceptance occurring at destination, and zero tolerance for quantity variance. The contract prohibits parcel post shipping; transportation must use the fastest traceable method, with delivery addressed to the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The purchase request number is 7017706951, with an original required delivery date of July 31, 2026, and the contract is issued under solicitation SPE7L1-26-T-906R, governed by DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-906X

This contract involves the procurement of a gasket with NSN 5330-01-603-2748 and part number 119810-13110 from YANMAR AMERICA CORPORATION, requiring one unit to be delivered within five days of award under solicitation SPE7L1-26-T-906X. The item must comply with stringent packaging standards specified in MIL-DTL-117, TYPE II, CLASS C, STYLE 1, including medium-duty, waterproof, greaseproof, and opaque packaging, and is excluded from the First Destination Packaging Program and standard commercial packaging due to its sensitivity and specifications. No asbestos is permitted as defined by FED-STD-313, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special marking required. The item must be shipped FOB origin to the designated delivery point at Camp Shelby, Hattiesburg, MS, using traceable freight methods and avoiding parcel post, with shipment designated as RDD/NSCS and tied to project TP 1. The contract defines a zero percent quantity variance and requires inspection and acceptance at destination, with the unit of issue as each. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced at the official DLA website. The contract's performance and compliance are overseen under DLA Land Supply Chain, with Kristina Derry as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-907X

The contract pertains to a single non-NSN item with CAGE code 62100 and part number 15047488, supplied by KOPPERS CO INC CONTAINER MACHINERY DIVISION located in Glen Arm, Maryland. The item is required in a quantity of one unit, with a total price based on a unit price for a single ea. Delivery is specified to be completed within five days of contract award, with FOB destination as the delivery term, meaning the supplier assumes all risk and cost until the item reaches the designated destination. Inspection and acceptance both occur at the destination, with no variance allowed in quantity—zero percent plus or minus. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and labeling must follow MIL-STD-129. Packaging must be palletized per RP001 DLA Packaging Requirements for Procurement, with the unit of issue and quantity per unit pack as defined in the contract. The delivery address is N62792 CVN/SSN MATERIAL SUPPORT at 500 West Park Lane, Hampton, VA 23666-5027, and shipment must be sent by the fastest traceable method; parcel post is strictly prohibited. The required delivery date is August 3, 2026, with no need ship date specified, and the solicitation number is SPE7L1-26-T-907X. The contracting office is under the Department of Defense, Land Supply Chain, and the primary point of contact is Darrell Pannell. For government use, the item is identified with DIC A3B, funding code XP, and project code ON9 TP 1.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

SHAFT, STRAIGHT

Solicitation # SPE7L1-26-T-906Q

The contract is for the procurement of one straight shaft with NSN 3040-01-491-3925 under solicitation number SPE7L1-26-T-906Q, with a required delivery within five days of award. The item is part of a full and open competition managed by the Department of Defense through the Land Supply Chain, and the offeror must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Covered Defense Information applies, and the supplier is prohibited from using any Class I ozone-depleting chemicals in the manufacturing or incorporation of the part; any substitute chemicals require prior approval unless explicitly authorized by specifications. Complete technical data packages, including data for both approved and alternate parts, must be provided if Table A0648 is referenced. The place of performance is Portsmouth, with a zip code of 03801-5000. Responses are due by August 14, 2026, and the solicitation was posted on August 3, 2026. The primary point of contact for inquiries is Kristina Derry, reachable via email and phone provided.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE