Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Packaging, Preservation & UID Marking Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of UID marking, packaging, and preservation services for repaired radar transmitters, fully complying with DFARS 211.274 and MIL-STD-2073 standards. All work must ensure traceability through unique item identification and proper handling procedures to maintain inventory integrity and readiness for military use. The services are to be performed at the place of performance located in Coffeyville, Oklahoma, with a zip code of 73145, and must adhere to strict defense logistics requirements for preservation and data marking. This subcontract is categorized under NAICS code 332999 and is managed by the U.S. Department of Defense through the FA8122 AFSC PZAAB office. The opportunity was posted on July 7, 2026, with a response deadline of December 1, 2027, indicating a long lead time for planning and submission. There is no set-aside designation specified, and no point of contact information is provided in the data, suggesting potential reliance on the official SAM.gov listing for additional procurement details. Compliance with all federal military standards is mandatory, and failure to meet these requirements will result in non-conformance and possible disqualification.

General Info

UID marking, packaging, and preservation of radar transmitters per DFARS and MIL-STD-2073 in Coffeyville, OK.

Agency

Department Of Defense → FA8122 Afsc PzaabView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8122 Afsc Pzaab
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8122 Afsc Pzaab
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide UID marking, packaging, and preservation of repaired radar transmitters in compliance with DFARS 211.274 and MIL-STD-2073.

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
Dust Boot and Propeller Cap Kit ManufacturingThe contract involves the manufacture and supply of a Dust Boot and Propeller Cap Kit, identified by NSN 2520011423210, designed for military vehicle propeller systems to safeguard against contamination and mechanical wear. The kit includes components such as a CAP, DUST, PROPELLER, and associated PARTS, all critical to maintaining operational readiness in demanding environmental conditions. This is a subcontract opportunity set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, aligning with FAR 19.5 provisions to promote small business participation in defense contracting. The NAICS code 332999 categorizes this as other fabricated metal product manufacturing, indicating the specialized fabrication and assembly requirements involved. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, indicating a rapid turn-around for qualified vendors to submit proposals. The contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, which oversees critical components for military vehicle systems. While specific performance locations and point of contact details are not provided, the contract references a DIBBS platform link for official solicitation documents and submission procedures, emphasizing electronic procurement protocols. Successful bidders must meet stringent quality and compliance standards to ensure part compatibility and reliability under military operating conditions.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → FA8122 Afsc Pzaab

Same awarding agency

NAICS: 336412
New
Federal
F108 Compressor Inlet Temperature (CIT) SensorThe United States Air Force, through the Air Force Sustainment Center at Tinker Air Force Base, is seeking contractors to repair F108 Compressor Inlet Temperature (CIT) Sensors, NSN 2915-01-139-6618PN, with part numbers 8901-180 and 9178M37P02. The repair work includes disassembly, cleaning, inspection, maintenance, reassembly, testing, and finishing to restore the sensors to serviceable condition, with all labor, materials, equipment, and facilities to be provided by the contractor. The contract will be structured as a Firm Fixed Price, Indefinite Delivery Requirements type with a one-year base period and four optional one-year extensions. The sensors are classified as a service under the Service Contract Labor Standards statute, and the work is governed by a requirement for a quality system compliant with ISO 9001:2000, verified through certification or a DCMA QMS audit. A total of 150 units are required annually, delivered at a rate of 12 units every 30 days, with shipments directed to the DLA Distribution Depot at Tinker AFB. UID marking is mandatory for all delivered items. The solicitation, identified as FA812226RB001, is open to all responsible sources, though qualification is required and must be completed prior to award, with no delays permitted for additional source approval. Current approved sources include Woodward, Inc. with CAGE code 66503. Line Item 0002 allows for over-and-above work to be negotiated separately, while Line Item 0003 covers data requirements per the Contract Data Requirements List without separate pricing. The acquisition follows FAR Part 12, treating the service as a commercial item, and utilizes electronic procedures for submission. A designated Ombudsman is available to receive and relay concerns from offerors during the proposal process, ensuring confidentiality without influencing evaluation or selection. Proposals are due by August 24, 2026, and the contract will be awarded based on compliance with technical, quality, and qualification criteria.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
Federal
F16_AN_APG68_DualModeTransmitter_NSN5960011538780_585R224H01_3The contract pertains to the repair and qualification of Electron Tubes with NSN 5960-01-153-8780 and part numbers 585R224H01 and 585R224H03, specifically for use in the F-16 AN/APG-68 Radar Dual Mode Transmitter. To become a qualified repair source, potential offerors must meet stringent requirements including notifying the government of intent to qualify, demonstrating access to facilities and equipment capable of repair, inspection, testing, packaging, and storage, and providing a complete data package that includes all relevant drawings and specifications, particularly Northrop Grumman drawing 585R224. Offerors must repair the tubes in strict compliance with the ESA-approved engineering data package and comply with Unique Identification requirements under DFARS 211.274. They are required to conduct and document quality, performance, and environmental evaluations at their own expense and submit a qualification test plan to 416 SCMSGUEAA for prior approval, followed by a full test report. The government reserves the right to inspect all testing processes and must be notified at least 30 days in advance of any qualification testing, with offeror facilities open to government observation. A pre-contract award qualification article meeting all requirements of drawings 585R224H01 and H03 must be submitted and evaluated for form, fit, and function, with results communicated within 90 days. Successful qualification does not guarantee contract award, and a post-contract first article may still be required. Estimated costs for qualification are $4,500, with a projected completion time of 180 days. Offerors not yet qualified may still submit bids if they can prove they will meet all requirements before contract award, but no delays will be granted to accommodate qualification efforts. Certain sources may qualify for waivers under specific criteria such as prior supply history to the government or OEM, qualification on similar or legacy part numbers, organizational continuity after corporate changes, or proven capability on analogous items verified by technical and documentation evidence. All bids must be submitted by December 1, 2027, and the responsible office is located at Tinker AFB, Oklahoma, with the point of contact being the SASPO office.
Electronic and Precision Equipment Repair and Maintenance

POSTED

17 days ago

DEADLINE

in over 1 year
View Details
NAICS: 332439
Federal
Spares Procurement of F108 Shipping and Storage Containers Industry DayThe United States Air Force is preparing to issue a potential 10-year Multi Award Contract for the procurement of F108 shipping and storage containers, with an industry day scheduled for July 29, 2026, at 10:00 am CST to facilitate market research and gather feedback. This virtual event will outline draft objectives, proposed proposal requirements, evaluation criteria, and the structure of the MAC, allowing industry representatives to understand the government’s needs and provide technical insights that will shape the final solicitation. The contract will cover five specific National Stock Numbers with corresponding part numbers and estimated quantities totaling 736 units, including F108 containers used for spares procurement. All questions submitted during the event will be documented and publicly posted on SAM.gov along with official government responses to ensure transparency and equitable access to information. The solicitation number for this effort is FD20302500037, with a response deadline of July 24, 2026, and it is classified under NAICS code 332439. The procuring activity is the FA8122 AFSC PZAAB office located at Tinker Air Force Base, Oklahoma, with performance expected in Coffeyville, Oklahoma. Primary point of contact for contractual inquiries is Brandi Bridgett, Contract Specialist, and Tara Parker, Contracting Officer, both reachable via official Air Force email addresses. The opportunity is posted on SAM.gov as a special notice under the Department of Defense, and interested parties are encouraged to review the full details through the provided UI link to prepare for the upcoming procurement timeline.
Other Metal Container Manufacturing

POSTED

17 days ago

DEADLINE

in 32 minutes
View Details