Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

PAD, THRUST

Awarded
HSCG40-17Q-AN043Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The US Coast Guard Surface Forces Logistics Center, IBCT Product Line, seeks to procure specific thrust pads manufactured by Waukesha Bearings Corp, requiring 14 units of NSN 2530-01-309-5001 and 2 units of NSN 2530-01-309-5000. The solicitation is a combined synopsis/solicitation for commercial items under NAICS code 332991, adhering to FAR and Homeland Security Acquisition Manual guidelines, and allows submissions via email or fax by March 16, 2017, with awards anticipated by March 17, 2017. This procurement is planned as a non-competitive sole source due to the technical requirements and OEM exclusivity, emphasizing that substitute part numbers are unacceptable and products must be individually packaged and bar-coded per Coast Guard specifications. Offerors must be registered in the System for Award Management (SAM) with valid DUNS and Tax Identification Numbers, and provide necessary certifications, including disclosure related to foreign entity status and compliance with various federal clauses on labor, equal opportunity, and procurement restrictions. Delivery is F.O.B. Destination to Baltimore, MD, with inspection at delivery. Potential suppliers not currently recognized as authorized distributors for the OEM are invited to submit evidence of authorization within two days of the notice’s posting. Award decisions will be based solely on price, and all responses must comply with the detailed procedural and contractual requirements outlined in the solicitation.

General Info

US Coast Guard sole source procurement of 16 OEM thrust pads, delivery Baltimore, award by March 17, 2017.

Contract Value

$130,466

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

MD, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)
Contacts1 person available
OfficeBALTIMORE, MD, 21226, USA
Office AddressBALTIMORE, MD, 21226, USA
Contacts

Full Description

Show more
THE USCG SURFACE FORCES LOGISTICS CENTER, IBCT PRODUCT LINE HAS A REQUIREMENT TO PROCURE THE ITEM NOTED BELOW. QUOTES MAY SUBMITTED BY EMAIL TO contact@example.gov OR FAXED TO +1 (555) 000-0000. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-95 (JAN 19TH,2017) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333991 and the Small Business Size Standard is 500. This synopsis/solicitation is issued pursuant to FAR 6.203-1 and HSAM 3006.302-1. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.5. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with System for Award Management (SAM) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is MARCH 16TH, 2017. TWELVE (12) NOON Eastern Standard Time. AWARD WILL BE ON OR ABOUT MARCH 17TH, 2017. AWARD WILL BE BASED ON PRICE. Item 1: NSN: 2530-01-309-5001 PAD, THRUST PART NUMBER: B-010-983 QTY: 14 EACH. MFG: WAUKESHA BEARINGS CORP ITEM 2: 2530-01-309-5000 PAD, THRUST PART NUMBER: B-010-983 QTY: 2 EACH. MFG: WAUKESHA BEARINGS CORP Delivery on or before: NEED AS SOON AS POSSIBLE. YOUR BEST DELIVERY DATE. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Governments belief that only WAUKESHA BEARINGS CORP and/or their authorized distributors can obtain the required technical and engineering data, and genuine OEM parts, required to provide these items. Concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (2) calendar days from the day this notice is posted. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor, and verifying the OEM will supply genuine OEM parts. The items are used on various US Coast Guard vessels. Substitute part numbers are NOT acceptable. All items will be individually packaged and bar-code in accordance with Coast Guard specification SP-PP&M-001 REV'D DATED JUNE 6, 2011. Inspection and acceptance shall take place at Destination after verification of preservation, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD. NOTE: DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE NOT AVAILABLE FROM THIS AGENCY. It is anticipated that a purchase order shall be awarded as a result of this synopsis/solicitation. OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (OCT 2015); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (NOV 2015) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (MAY 2015); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (JAN 2016). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). (ii) Alternate I (Oct 1995) of 52.219-6. (iii) Alternate II (Mar 2004) of 52.219-6; FAR 52.219-28, Post Award Small Business Program representation (Apr 2009)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JAN 2016)(E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (APRIL 2015); FAR 52.222-26, Equal Opportunity (APRIL 2015)(E.O. 11246); FAR 52.222-36, Affirmative Action for Workers with Disabilities (JULY 2014)(29 U.S.C. 793); 52.223-18; Contractor Policy to Ban Text Messaging While Driving (Sep 2010) (E.O. 13513); FAR 225-13, Restrictions on Certain Foreign Purchase (Jun 2008) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003)(31 U.S.C. 3332). The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling +1 (555) 000-0000, or +1 (555) 000-0000 for international calls.

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
RING, BEARING, INNER
Solicitation # SPE4A4-27-T-0010
Solicitation SPE4A4-27-T-0010 is a fixed-price request for quotations issued by the DLA Weapons Support Supplier Oper Supplier Spt Div for the procurement of 248 inner bearing rings, NSN 3110013800872, part number 601023388. The requirement specifies a delivery timeline of 206 days after receipt of order, with destination inspection and acceptance. Quotes must be submitted via the DIBBS system by November 10, 2026. The procurement is categorized under NAICS code 332991 and incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. This contract contains strict sourcing and quality mandates. Per DFARS 252.225-7016, bearings must be manufactured in the United States, its outlying areas, or Canada, with domestic component costs exceeding 50 percent of the total. Offerors must provide a contractor declaration regarding the domestic or foreign nature of the materials. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging and preservation must adhere to MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129, with a strict prohibition on the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment.
DLA WEAPONS SUPPORT SUPPLIER OPER SUPPLIER SPT DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS