Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

PAPER, FILTER

Active

SPE2DH-26-T-5353Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of disposable paper filters designed for use with rigid sterilization container systems, with a unit of issue of 1,000 units per package. The item is identified by NSN 6640-01-378-5773, and the requested quantity is one package totaling 1,000 units. The procurement is governed by DLA packaging requirements and mandates the removal of government identification from non-accepted supplies. Defense information potentially applies, indicating sensitivity or controlled handling procedures. The solicitation number is SPE2DH-26-T-5353, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense, specifically the Medical Supply Chain FSH, with performance required at JBER, Alaska, 99506-4400. Delivery is expected within five days of award. The primary point of contact is Tina Vu, reachable via email and phone, and the solicitation is accessible through the DIBBS platform.

General Info

Procurement of 1,000 disposable paper filters for sterilization containers, DLA compliant, delivery to JBER Alaska within five days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

5250 GIBSON AVE BLDG 5250, JBER, AK, 99506-4400, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJul 21

Solicitation

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressUS

Contacts

Tina Vu

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

PAPER,FILTER
PAPER, FILTER, DISPOSABLE 1000S
USED WITH RIGID STERILIZATION CONTAINER SYSTEM
.
UNIT OF ISSUE PACKAGE (1000 EA/PG)
INCLUDE RA001 OBJECT TEXT ID ST LANGUAGE E
.
1 PG = 1,000 EA
.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-378-5773 Quantity: 1 PG Purchase Request: 7017548720QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

THREAD, PIECEThe item specified is a THREAD, PIECE with NSN 1720-00-602-0997, quantity of 25 units, under Purchase Request 7017528515, with a delivery deadline of 162 days ADO. This procurement is governed by strict DLA packaging requirements and requires the contractor to be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, are authorized to access the controlled data. The solicitation number is SPE7M2-26-T-5700, posted on July 21, 2026, with responses due by August 3, 2026. The contracting organization is the Department of Defense’s Nuclear Reactor Program, with performance to be delivered to New Cumberland, PA, 17070-5002. Alisha Blanton is the primary point of contact for inquiries.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

FILTER ELEMENT, FLUIThe contract pertains to the procurement of a filter element for fluid pressure, identified by NSN 4330-01-131-3049 and part number 410162, with a quantity of two units required. Delivery is due within twenty days of award and must be shipped FOB origin to the Naval Undersea Warfare Center Division Keyport in Washington, with strict adherence to packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. No special marking is required, and palletization must comply with DLA packaging directives. The item must be shipped via traceable freight methods only, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from contact with the product unless part of exempted components such as specific instruments, sensors, or controls as outlined by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. The solicitation number is SPE7M1-26-T-220Q, with a response deadline of August 3, 2026, and an original required delivery date of July 16, 2026. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each, with a fixed unit price and zero tolerance for quantity variance. Inspection and acceptance occur at the destination. The point of contact for the contract is Michael Reese of the Defense Logistics Agency, and the item falls under NAICS code 333998. Government-use codes and shipping identifiers are provided for internal logistics tracking, and the contract is issued under the Department of Defense by the Maritime Supply Chain organization.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

TEST PAPER AND COLOR CThe contract specifies the procurement of test paper and color chart for pH, provided in six packs of 100 strips per package, with the unit of issue being a package containing six entities. The product is identified by NSN 6640-01-345-0909, with a quantity of one package required under purchase request 7017560997. Delivery must be completed within 20 days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and non-accepted supplies must have government identification removed. The solicitation number is SPE2DH-26-T-5361, issued on July 21, 2026, with responses due by July 28, 2026. The acquiring agency is the Department of Defense, specifically the Medical Supply Chain FSH, with performance taking place at FPO, ZIP 96667. Primary point of contact is Tina Vu, reachable via email and phone provided. The NAICS code 333998 identifies the category of manufacturing involved.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

FILTER ELEMENT, FLUIDThe contract pertains to a fluid pressure filter element with a tinned copper core, identified by NSN 4330-00-798-4150, with a quantity of one unit required under purchase request 7017559825. Delivery is mandated within 20 days after order, and the procurement is governed by the solicitation number SPE7M1-26-T-220P, issued on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and unauthorized removal of government identification from rejected items is prohibited. The place of performance is Redstone Arsenal, Alabama, with Michael Reese of the Department of Defense’s Maritime Supply Chain acting as the primary point of contact.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

FILTER UNIT, FLUID, PThe contract specifies the procurement of one unit of a Fluid Pressure Filter Unit with NSN 4330-01-328-5710 and part number 514-1633-1 under solicitation SPE7M1-26-T-220R. Delivery is required within 20 days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence over ASTM standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is one each. The shipment must be sent via the fastest traceable means, excluding parcel post, and is directed to Fort Campbell, Kentucky. The delivery address is W34GM2, Building 5339, Wickham Avenue, Fort Campbell, KY 42223-0000, with a mark-for address matching the same location. The required delivery date is July 16, 2026, and the contract references the DLA Master List incorporated by reference, with revisions controlled by the solicitation issue date. The point of contact is Michael Reese, and the solicitation was posted July 21, 2026, with responses due August 3, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

SEWING MACHINE, INDUSTRThe contract specifies the procurement of industrial sewing machines under NSN 3530011809072, with detailed technical requirements including an arm length of 10.500 inches nominal, stitch type 301 style H with compound alternating presses, and compliance with OO-S-256/1B Class 4. The machines are identified as commercial items and must conform to MIL-STD-130N for government identification marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 for packaging, while requiring adherence to MIL-STD-129 for labeling and RP001 for DLA packaging and palletization. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to stringent verification levels. The machines are manufactured by Consolidated Sewing Machine Corp and Pennsylvania Sewing Machine Company under specified part numbers. The contract includes two line items totaling 19 units, with delivery scheduled in 85 days FOB origin and inspection and acceptance occurring at the destination. Units are to be shipped to two DLA distribution centers in Jacksonville, Florida and Cherry Point, North Carolina, with exact packaging, unit of issue, and quantity per unit pack defined per the contract. The need ship date is July 8, 2026, with an original delivery deadline of January 17, 2027. All requirements are governed by the solicitation SPE8ED-26-T-1156, which includes federal contracting clauses, restrictions on government identification removal, and documentation protocols for source approval. The contract is issued under a DoD-authorized unit of issue with pricing provided per unit, and all transportation logistics follow DLAD procedural notes C19 and C20.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 14 hours ago

DEADLINE

FILTER, FLUIDThe contract specifies the procurement of a two-stage fluid pressure filter for air lines, designed to remove condensates and impurities with a 40-micron rating, operating at 200 psi and 100 CFM. The approved suppliers are Parker-Hannifin Corporation with part number 06F24A and W.W. Grainger, Inc. with part number 4ZL47. The item is identified by NSN 4330-01-056-3122, and two units are required at a total price of $2.000 per unit. Delivery is required within five days FOB origin with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to the stricter requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization per RP001. The filter must be shipped by the fastest traceable means, explicitly excluding parcel post, to the specified freight address in Milwaukee, Wisconsin. The required delivery date is July 21, 2026, with no need for a ship date input, and the contract is issued under solicitation SPE7M0-26-T-014N with oversight from the Department of Defense’s Maritime Supply Chain ESOc Buys office. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and government contact information and identifiers are provided for administrative and tracking purposes.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

STRAINER ELEMENT, SEThe contract is for one Strainer Element, Sediment, identified by NSN 4730-01-596-3898 and part number THH0065, issued under solicitation SPE7M3-26-T-7572 by the Department of Defense’s Fluid Handling Division. The item must be delivered within 20 days to the address in Port Hueneme, California, with delivery terms set at FOB Origin and inspection and acceptance occurring at the destination. No quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standard. Palletization must follow RP001, and the item must not be shipped via parcel post; instead, it must be sent by the fastest traceable means. The required delivery date is July 16, 2026, and the contract specifies a single unit of issue at a total price of one dollar. Technical and quality compliance is governed by referenced R and I numbers from the DLA Master List, accessible online, with revisions controlled based on acquisition type and amendment dates. Government use codes and shipment identifiers are included for internal tracking, and the primary point of contact is William Cain, with details provided for inquiries and documentation.

FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

CYLINDER, GRADUATED,The contract specifies the procurement of two graduated laboratory cylinders, each with a capacity of 1000 milliliters, made of polymethylpentene PMP, clear, featuring gradation intervals of 10.0 milliliters, a diameter of two and five-eighths inches, and a height of seventeen and one-quarter inches. The unit of issue is each, and bidders must provide the source and part number being supplied. Packaging must comply with DLA Packaging Requirements for Procurement, requiring each unit to be sealed in a suitable container to prevent damage or breakage, and shipped in commercial exterior containers that ensure safe delivery at the lowest rate to the specified delivery point at Camp Pendleton, California. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5349, with a response deadline of July 28, 2026, and delivery required within 20 days after award. Point of contact is Tina Vu at DLA Medical Supply Chain FSH.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

FILTER ELEMENT, FLUIThe contract is for one FILTER ELEMENT, FLUID with NSN 4330014337132 and part number 6001804 supplied by SPX Corporation Dehydration Division, under solicitation SPE7M0-26-T-014Y. Delivery is required within five days of contract award, FOB origin, and must be shipped by the fastest traceable means—parcel post is prohibited. The item is classified as a critical application item and must comply strictly with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129 with no special markings required. The item must not contain or come in direct contact with mercury or mercury compounds except under narrowly defined exceptions for specified functional uses like batteries or instruments, and portable devices containing mercury must have shockproof construction and a secondary containment. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The delivery address is Norfolk Naval Shipyard in Portsmouth, VA, with special handling instructions requiring palletization per RP001 and government-specific coding for tracking and logistics. The required delivery date is July 22, 2026, with no tolerance for quantity variance, and acceptance occurs at the destination upon inspection.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

HYDROMETER, GRADUATEThe contract specifies the procurement of one each of a graduated hydrometer with an integrated thermometer for measuring liquid temperature, featuring a specific gravity range of 39 to 51, manufactured from soda lime glass with 0.1 increments, and compliant with ASTM specification 6H. The device is lead and mercury free and meets NIST certification standards. Packaging must adhere to DLA requirements and the Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery via common carrier at the lowest cost to the designated delivery point. All items must be marked in accordance with medical marking standards and government identification must be removed from non-accepted supplies. The solicitation number is SPE2DH-26-T-5363, with a response deadline of July 28, 2026, and delivery required within 20 days after award. The product is identified by NSN 6630-01-687-6909 under a federal procurement managed by the Department of Defense's Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, and the solicitation may involve covered defense information.

Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

DISH, MEDICAMENT, DENTALThe contract pertains to the procurement of 10 units of a glass dappen dish specifically designed for dental and medical use, identified by NSN 6520-01-700-5630. The dish measures 1-1/4 inches in outside diameter with a depth of 1 x 1-1/8 inches and is constructed from smooth, transparent, heat-resistant glass to prevent adhesion of dense materials such as acrylics, amalgams, resins, and sealants. It features a thick solid base for stability and spill protection but is not autoclavable, requiring cold sterilization only. The unit of issue is each, and delivery is scheduled within 81 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions based on solicitation or award dates. The procurement is subject to DLA packaging standards, requirements for removal of government identification from non-accepted supplies, and potential handling of covered defense information. The solicitation number is SPE2DH-26-T-5357, posted on July 21, 2026, with responses due by July 28, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance directed to APO 96260-5479 and primary contact information provided for Craig Singleton. Bidders must clearly identify the source and part number being offered.

Dental Equipment and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

GUTTA PERCHA POINTSGuttapercha points for endodontic root canal therapy are being procured in assorted sizes 15 through 40, designed for use with .06 taper files in single cone obturation techniques. Each package contains 60 points, and the item is designated by NSN 6520-01-532-1818 with a total quantity of two packages. The product must comply with strict shelf-life requirements, mandating a non-extendable 24-month expiration period from manufacture. Technical and quality standards referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date. Packaging must adhere to DLA procurement guidelines, and all supplies must be free of government identification if rejected. Bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DH-26-T-5355, has a response deadline of July 28, 2026, with delivery due within 84 days after award to APO zip code 96260-5479. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tara Quinty as the primary point of contact.

Dental Equipment and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

DISPOSAL CONTAINER,The contract is for the procurement of 10 units of a disposal container specifically designed for the safe disposal of hypodermic needles and syringes, with dimensions between 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a securable cap and a lift-off cover. The item is identified by NSN 6530-01-645-6923 and is part of a purchase request numbered 7017548716 with a total quantity requirement of 20 units to be delivered within 20 days of award. Technical and quality standards governing the product are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies. Covered defense information may apply, requiring appropriate handling and safeguarding. The solicitation number is SPE2DH-26-T-5351, issued on July 21, 2026, with responses due by July 28, 2026. The contracting office is under the Department of Defense's Medical Supply Chain FSH, with performance location at Fort Campbell, Tennessee, and primary point of contact Tina Vu, reachable via email and phone provided.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

BALL, PHYSICAL THERAPYThe contract pertains to the procurement of BALL PHYSICAL THERAPY items identified by NSN 6530-01-699-5154 and part number LE9565, with a quantity of six units to be delivered within five days FOB destination. The unit price is $6.00 per unit, totaling $36.00, with no variance allowed in quantity. All items must comply with the latest edition of the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest cost. Marking and palletization must follow strict DLA guidelines, and the items are not regulated by the FDA. Delivery is required to Rose Barracks, Building 728, AWCF SSF, Sudlager Straße, Vilseck, Germany, with the original required delivery date set for July 23, 2026. The solicitation number is SPE2DH-26-T-5345, issued by the Department of Defense under the NAICS code 339113, with Tina Vu listed as the primary point of contact. All technical and quality requirements referenced are governed by the DLA Master List, and shipping must comply with DLA Procurement Notes C19 and C20.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

COAT, MAN'S PAJAMAThis contract specifies the procurement of a man’s pajama coat in medium size, featuring a full-length coat style made from broadcloth fabric composed of cotton and polyester, with a snap fastener front and blue overall color. The unit of issue is each, and the item is identified by NSN 6532-00-081-1802 with a quantity of one unit ordered under purchase request 7017546135. Delivery is required within five days of award. The solicitation is part of a federal procurement under contract number SPE2DH-26-T-5360, posted on July 21, 2026, with responses due by July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed prior to return. The procurement is administered by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

MEASURE, LIQUIDThe contract involves the procurement of three units of a liquid measuring device with the NSN 6640-01-650-1146, intended for use with the unmounted water purification unit identified as 4610-01-628-1081. Each unit is packaged in 250ml capacity and the entire requirement must be delivered within 20 days of award. Bidders are required to specify the source and part number being offered to ensure compliance with technical specifications. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a contract amendment supersedes it. The contract also mandates the removal of government identification from any non-accepted supplies. The solicitation number is SPE2DH-26-T-5347, with a response deadline of July 28, 2026, and the purchasing organization is the Medical Supply Chain FSH under the Department of Defense. The place of performance is Camp Pendleton, CA, 92055-5627, and primary point of contact is Tina Vu, reachable via email and phone as listed. The NAICS code for this procurement is 334610, indicating classification within instruments and related equipment manufacturing.

Manufacturing and Reproducing Magnetic and Optical Media

POSTED

about 14 hours ago

DEADLINE

GUTTA PERCHA POINTSGutta percha points for endodontic root canal therapy are supplied in assorted sizes ranging from 45 to 80, with each package containing sixty points distributed across the specified sizes: 45, 50, 55, 60, 70, and 80. These points are intended for use with .06 taper files in single cone obturation techniques after endodontic treatment. The unit of issue is a package of sixty, and the items are classified as a TYPE I (CODE M) product with a mandatory shelf life of twenty-four months that cannot be extended. All supplies must comply with the Department of Defense’s technical and quality requirements referenced in the DLA Master List, and packaging must conform to DLA procurement standards. Government identification must be removed from non-accepted supplies, and the item is subject to potential covered defense information controls. The solicitation number is SPE2DH-26-T-5354, with a response deadline of July 28, 2026, and the NSN is 6520-01-532-2067. A quantity of two packages is required to be delivered within eighty-four days of award to APO ZIP 96260-5479. Bidders must clearly identify the source and part number being offered, and all inquiries should be directed to Tara Quinty at the provided DLA contact information.

Dental Equipment and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

BALL, PHYSICAL THERAPYThe contract is for the procurement of six red 55 cm physical therapy fitness stability balls under NSN 6530-01-699-5136, with a unit price of $6.00 and a total price of $36.00. Delivery is required within five days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The item is not regulated by the FDA and must comply with Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with commercial packaging required for all medical acquisitions—each unit must be individually sealed in a container that protects against damage, and outer shipping containers must ensure safe, cost-effective transport to the destination. Marking must follow the Medical Marking Standard No. 1, with commercial packaging and palletization as specified. The item is for delivery to Rose Barracks, Building 728, AWCF SSF, Sudlager Strasse, Vilseck 92249, Germany, with a required delivery date of July 23, 2026. Technical and quality requirements are governed by the DLA Master List, and the contract is issued under solicitation SPE2DH-26-T-5344, with a response deadline of July 28, 2026. Primary point of contact is Tina Vu, and the contract type is a federal solicitation under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 14 hours ago

DEADLINE

WRAP AND LITTER, PAT

Alumina Refining and Primary Aluminum Production

POSTED

about 14 hours ago

DEADLINE

BAND, EXERCISE, PHYSICAL

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE