Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PARALLEL

Active
SPE8E5-26-T-4154Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the DLA Dist San Joaquin under number SPE8E5-26-T-4154, is for the procurement of 77 units of Type I parallels measuring 1/2 x 5/8 x 6 inches, identified by NSN 5220-00-274-7374. The contract requires adherence to DLA packaging requirements and specific technical and quality standards found in the DLA Master List. Delivery is required within 167 days after receipt of order, with performance located in Tracy, California. The procurement is fully competitive and falls under NAICS code 334516. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and notes that covered defense information may potentially apply to this acquisition.

General Info

DLA Dist San Joaquin seeks 77 Type I parallels for delivery in Tracy, California.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-4154 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUSA
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PARALLEL
PARALLEL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INDIVIDUAL,TYPE I,SIZE 1/2 X 5/8 X 6 INCHES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5220-00-274-7374 Quantity: 77 EA Purchase Request: 7018160378QTY: 77 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
DIBBS
GAGE, FUEL ADAPTER
Solicitation # SPE85-26-T-4173
This contract is for the procurement of eight fuel adapter gages, identified by part number 1876AS100-1 and NSN 5220013019247. The order is designated for delivery to DLA Distribution Jacksonville with a required delivery date of June 7, 2027, and a shipping lead time of 167 days. The contract specifies that the items have no shelf life requirement and must be packaged according to ASTM D3951 and MIL-STD-129 standards. Compliance requirements include CMMC Level 2 self-assessment and adherence to Covered Defense Information protocols. The supplier must ensure that mercury is not intentionally added to the hardware, except where functionally required by NAVSEA. Additionally, the contract mandates strict adherence to the Hazard Communication Standard, requiring the submission of Safety Data Sheets and compliant labeling for any hazardous materials provided to the government.
JACKSONVILLE BLDG

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
PARALLEL
Solicitation # SPE85-26-T-4135
This contract is for the procurement of 46 units of Type I individual straight bars measuring 1/4 x 5/8 x 6 inches with a Rockwell hardness rating of 55-60. The items are classified as critical application items and must adhere to TDP Rev A Gen 1 and GGG-P-61B specifications. The agreement requires origin inspection and strict adherence to sampling methods under MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots. Delivery is required within 167 days, with a need ship date of March 1, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while specifically prohibiting the intentional addition of mercury or mercury-containing compounds. The contract also emphasizes the avoidance of plastics for wrapping and cushioning materials whenever possible.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
GAGE, CONTACT, ELECTRICA
Solicitation # SPE8E5-26-T-4176
Contract SPE8E5-26-T-4176 is a procurement for six electrical connector contact gages, identified by NSN 5220013345965 and part number A-034B from Maury Microwave, Inc. The order is managed by the Department of Defense through DLA Distribution San Diego, with a required delivery date of April 16, 2027, and a delivery window of 167 days. The terms specify FOB Origin with inspection and acceptance occurring at the destination. The supplier must adhere to specific technical and quality requirements outlined in the DLA Master List, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. Additionally, the contract notes the potential application of covered defense information and the requirement for the removal of government identification from any non-accepted supplies.
SAN DIEGO

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
PARALLEL
Solicitation # SPE8E5-26-T-4130
This contract is a solicitation from the DLA Distribution San Joaquin for the procurement of 36 units of solid straight bars measuring 3/8 x 3/4 x 6 inches, identified by NSN 5220-00-274-7373. The items are designated as critical application items requiring source inspection and must adhere to technical specifications GGG-P-61B Revision B. Delivery is required within 167 days, with a need date of March 1, 2027, shipping FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance will be conducted via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. All technical and quality requirements are incorporated by reference through the DLA Master List.
DLA DIST SAN JOAQUIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-4179
This contract, identified as SPE8E5-26-T-4179, is a solicitation for the procurement of 30 units of a profile gage, identified by NSN 5220-01-348-1638 and part number J25502 from Bosch Automotive Service Solutions Inc. The order is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. Delivery is required within 167 days, with a required delivery date of February 2, 2027, and a need ship date of March 1, 2027. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The contract also incorporates specific technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
GAGE, INSPECTION
Solicitation # SPE8E5-26-T-4151
This contract, identified as SPE8E5-26-T-4151, is a solicitation for the procurement of 17 units of an inspection gage, identified by NSN 5220-01-155-3843 and part number D89892-8. The order is managed by the Department of Defense through the DDSP New Cumberland Facility. Key technical requirements include adherence to the DLA Master List of Technical and Quality Requirements and specific packaging standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. The delivery is set for FOB Origin with inspection and acceptance occurring at the destination. The required delivery date is February 28, 2027, with a need ship date of March 1, 2027, and a delivery window of 167 days. Because the item may require specialized casting or forging tooling that the government does not possess, suppliers are directed to the DLA Casting and Forging Assistance Request process for further sourcing information. Covered Defense Information potentially applies under RD003.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
DIBBS
GAGE, PULLOVER
Solicitation # SPE8E5-26-T-4190
This contract is for the procurement of 32 units of Pullover Gages (NSN 5220-01-259-9100) for the US Army Watervliet Arsenal. The agreement specifies a delivery timeframe of 287 days with shipping and acceptance occurring at the origin. Key technical requirements include a heavy phosphate finish per MIL-DTL-16232 and strict adherence to specific cleaning, drying, and packaging standards, including the use of MIL-PRF-3150 preservative and MIL-PRF-3420 style C wrap. A critical component of this contract is the First Article Testing (FAT) requirement per FAR 52.209-3, which requires the contractor to provide one article for testing and notify the designated official 30 days prior to testing. The contract also mandates compliance with higher-level quality requirements, hazardous material safety data sheets, and the prohibition of intentionally added mercury. All deliverables must be shipped to the DLA Distribution New Cumberland facility in Pennsylvania.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334516
New
Federal
Purchase of a Handheld Raman - Narcotics Identification Analyzer
Solicitation # 19AL6026Q0016
The US Embassy Tirana, under the Department of State, is soliciting bids for the purchase of a Handheld Raman Narcotics Identification Analyzer. This combined contract opportunity, identified by solicitation number 19AL6026Q0016 and NAICS code 334516, requires the equipment to be utilized in Tirana, Albania. Interested parties must submit their responses by the deadline of September 16, 2026, at 2:30 PM. Primary coordination for this procurement is managed by Chris Carlisle and Saimira Haxhi via the embassy's dedicated bidding email address.
US Embassy Tirana

POSTED

about 11 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334516
New
Federal
Histology Sorting and Filing System
Solicitation # 140G0226Q0106
The United States Geological Survey’s National Wildlife Health Center in Madison, Wisconsin, is seeking market information for an automated Histology Sorting and Filing System to modernize its archival management of approximately 170,000 glass pathology slides and 185,000 paraffin-embedded tissue blocks. Currently managed through labor-intensive manual processes with no reliable tracking of stored items, the system must automatically sort, index, and retrieve histology samples by metadata such as case number, accession number, stain type, and date, using 1D and 2D barcode technology with a minimum throughput of 200 slides and 500 blocks per hour. The solution must integrate with laboratory information systems, maintain unique identifiers throughout the workflow, log all handling events, and ensure traceability with at least 99.5% sorting accuracy and 99.8% barcode read accuracy, while operating reliably in a laboratory environment with exposure to xylene and formalin vapors. The system must be compact, chemically resistant, compliant with OSHA and UL safety standards, and feature robust software with role-based access, audit trails, and daily automated backups. The procurement will be guided by the Buy American Act, requiring products to be manufactured, produced, or mined in the United States in sufficient commercial quantities and satisfactory quality. Respondents must indicate whether their business qualifies as a small business or other socioeconomic category under the NAICS code 334516 with a 1,000-employee size standard, and confirm U.S. manufacturing origin. All submissions must include product specifications, company details, SAM.gov registration, and validation of socioeconomic status. The system must come with full training, one year of preventive maintenance, onsite repair response within 72 hours, remote support during operational hours, and a minimum five-year supply of consumables. Deliverables include hardware, software licenses, integration documentation, acceptance testing protocols, and warranty documentation. This notice is strictly for market research and does not constitute a solicitation; no contract will be awarded based on responses. All submissions are due by July 28, 2026, at 2:30 p.m. Mountain Daylight Time, and must be sent exclusively via email to the designated point of contact.
Ofc Of Acquisition Grants-Denver

POSTED

about 11 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334516
New
Federal
Purchase of 4 Minus K vibration isolation platforms
Solicitation # 80NSSC26941944Q
The NASA Shared Services Center is seeking quotes for the purchase of four Minus K vibration isolation platforms under solicitation 80NSSC26941944Q. This procurement is designated as a total set-aside for small businesses and falls under NAICS code 334516. The place of performance is located in California, while the contracting office is based in Stennis Space Center, Mississippi. Interested vendors must submit their quotes in PDF format by the deadline of September 9, 2026, at 6:00 PM. The primary point of contact for this requirement is Cara Craft.
NASA Shared Services Center

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
Laboratory Solvent Recycler
Solicitation # 36C26326Q1069
The Department of Veterans Affairs, through the Network Contract Office 23, is seeking a cart-mounted fully automatic high-purity solvent recycling system for the Minneapolis VA Health Care System Pathology and Laboratory Department. This equipment is intended to safely reclaim solvents used in histology operations to reduce hazardous waste, lower operational costs, and ensure adherence to environmental and safety regulations. The solicitation, identified by number 36C26326Q1069, falls under NAICS code 334516. The response deadline for this special notice is September 9, 2026, and the place of performance is located in Minneapolis, Minnesota. There is no specific set-aside designated for this procurement.
Network Contract Office 23 (36C263)

POSTED

about 11 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
Superconducting Nanowire Single-Photon Detection (SNSPD) System
Solicitation # COMBO-AFRL-RMZB-2026-0019
Solicitation COMBO-AFRL-RMZB-2026-0019 is a combined synopsis and request for quotation issued by the AFRL/RIZ at Wright-Patterson Air Force Base, Ohio. The government is seeking a turnkey Superconducting Nanowire Single-Photon Detection (SNSPD) System and ancillary items to support research in LADAR, Lasercom, ISR, and tactical remote sensing. This requirement is 100 percent set aside for small businesses under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. The contract requires the delivery of one system that meets the technical specifications outlined in the Minimum Requirements Document dated 15 April 2026, covering detection efficiency, timing resolution, and cryogenic cooling across visible and near-infrared bands. Delivery is expected 28 weeks after the award and is designated as FOB Destination to AFRL/RYMM. Offers will be evaluated based on the lowest price technically acceptable criteria, where technical acceptability is defined by strict adherence to the Minimum Requirements Document. Quotes must be submitted via email to Mike Hornberger by 3:00 PM ET on 11 September 2026 and must include all warranty documentation and a statement of quote validity.
FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

about 11 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 332216
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-4165
This contract, identified as SPE8E5-26-T-4165, is a solicitation issued by the Department of Defense through DLA Distribution San Joaquin for the procurement of 3,170 rotary files. The items must adhere to the technical specifications of CID A-A-51152A and part number AA51152-2C13B. This is a total small business set-aside under NAICS code 332216, with a required delivery date of February 23, 2027, and a need ship date of March 1, 2027. The agreement mandates strict compliance with DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Key regulatory requirements include the Cybersecurity Maturity Model Certification Level 2 self-assessment and the protection of covered defense information. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, which is the DLA Distribution San Joaquin facility in Tracy, California.
Saw Blade and Handtool Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326220
New
DIBBS
TUBING, PLASTIC, SPIRAL
Solicitation # SPE8E5-26-T-4168
This contract is for the procurement of 334 feet of plastic spiral wrap tubing, identified by NSN 9330-01-345-2863 and part number 900952-22. The order is issued by the DLA Distribution San Joaquin, with delivery required within 167 days. The shipment is set for FOB Origin, with inspection and acceptance occurring at the destination in Tracy, California. The supplier must adhere to DLA packaging requirements, specifically RP001 and MIL-STD-129, with commercial packaging following ASTM D3951 unless hazardous material standards apply. The contract allows for a quantity variance of plus or minus 10 percent. Key dates include an original required delivery date of December 27, 2026, and a need ship date of March 1, 2027.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488190
New
DIBBS
INSULATION SLEEVING, TH
Solicitation # SPE8E6-26-T-4496
This contract is for the procurement of 52 units of Type I preformed pipe thermal insulation sleeving made of fibrous glass, conforming to MIL DTL 32585. The specified dimensions for the sleeving are 1.500 inches in thickness, 1.900 inches in inside diameter, and 36.000 inches in length. The items are identified by NSN 5640-00-841-5217 and must be delivered to DLA Distribution San Joaquin in Tracy, California. A critical requirement for vendors is the submission of a Health Hazard Assessment approved by the Navy Marine Corps Public Health Center at the time of the offer. The contract mandates adherence to DLA packaging requirements and MIL-STD-129 for marking and labeling. Delivery is expected within 167 days, with a required delivery date of May 7, 2027. Quality compliance is managed through a Certificate of Quality Compliance and specific Technical Data Package requirements.
Other Support Activities for Air Transportation

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332112
New
DIBBS
MANIFOLD, CHARGING AND
Solicitation # SPE8E8-26-T-5484
This contract, identified as SPE8E8-26-T-5484, is a solicitation by the Department of Defense via DLA Dist San Joaquin for the procurement of 37 units of refrigerant charging and testing manifolds, part number H85-473. The items are identified by NSN 4130-01-611-1106 and are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The required delivery date is December 14, 2026, with a need ship date of March 1, 2027, and a delivery window of 167 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Quality and technical requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
AIR CONDITIONER
Solicitation # SPE8E8-26-T-5425
This contract is for the procurement of one air conditioner unit, identified by NSN 4120-01-166-7741, for the Department of Defense via DLA Distribution San Joaquin. The equipment must be sourced from Carrier Corporation, with specific part numbers including 50BW012-601 and 90MA series. A critical environmental requirement stipulates that Class I ozone-depleting substances are prohibited, and the system must use HCFC-22, R134A, or an EPA-approved substitute. The delivery is set for FOB Origin with an inspection and acceptance point at the destination in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. The contract specifies a delivery window of 167 days, with a required delivery date of February 4, 2027, and a need ship date of March 1, 2027. Technical data and manuals are governed by the DLA Master List of Technical and Quality Requirements.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
FILTER ELEMENT, WATER P
Solicitation # SPE8E8-26-T-5461
This solicitation, issued by the DLA Dist San Joaquin under solicitation number SPE8E8-26-T-5461, is for the procurement of 14 water purification filter elements, identified by NSN 4610-01-465-7161. The contract falls under NAICS code 333310 and requires delivery within 167 days after the order is placed. Performance is to take place in Tracy, California. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the contract includes a requirement for the removal of government identification from any supplies that are not accepted. Responses to this solicitation are due by September 14, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE86-26-T-2190
This contract, identified as SPE8E4-26-T-2190, is a total small business set-aside solicitation for the procurement of four units of higher strength structural steel plate. The material is specified as rolled Grade EH-36U Class P, measuring 0.500 inches thick, 72 inches wide, and 29 feet long, with a reference weight of 3552.9 lbs per piece. The steel must be produced by an approved mill in accordance with American Bureau of Shipping rules for building and classing steel vessels and must comply with MIL-S-22698. Critical quality requirements include mandatory ultrasonic testing and the provision of chemical and mechanical certifications, which must be endorsed by an ABS Surveyor to be accepted. The contract mandates strict marking requirements, including the use of the letters AB and U where applicable, and comprehensive identification on each unit such as the contract delivery order number, NSN, and heat/lot numbers. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Delivery is required within 28 days after receipt of order to DLA Distribution San Joaquin in Tracy, California, with packaging and preservation adhering to MIL-STD-129 and ASTM A700 standards.
Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333994
New
DIBBS
DRIER, AIR-GAS, DESICCAN
Solicitation # SPE8E8-26-T-5504
This contract, identified as SPE8E8-26-T-5504, is for the procurement of 20 units of desiccant air-gas driers, specifically part number D2341 618 from Taylor Defense Products, LLC. The items are associated with NSN 4440-01-694-6778 and are to be delivered to DLA Distribution San Joaquin in Tracy, California. The required delivery date is March 10, 2027, with a need ship date of March 1, 2027, and a delivery window of 167 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific guidelines for packaging, source approval documentation, and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination.
Industrial Process Furnace and Oven Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334512
New
DIBBS
HEATING ELEMENT, ELECTR
Solicitation # SPE8E8-26-T-5428
This contract is for the procurement of 15 electrical non-immersion heating elements, identified by NSN 4520-01-219-6486 and part number 571X-68042. These components operate at 440 volts AC and are designed for use on model TFZ-23L. The items are classified as critical application items and must comply with strict environmental standards, specifically prohibiting the intentional addition of mercury or mercury-containing compounds unless they meet specific functional exceptions. The order is managed by DLA Distribution San Joaquin with a required delivery date of January 2, 2027, and a need ship date of March 1, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination in Tracy, California. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory for all shipments.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333310
New
DIBBS
WATER PURIFICATION UNI
Solicitation # SPE8E8-26-T-5497
Contract SPE8E8-26-T-5497 is a solicitation issued by the Department of Defense via DLA Distribution San Joaquin for one frame-mounted water purification unit. The requirement is identified by NSN 4610-01-679-9169 and corresponds to Parker Hannifin Corporation part number 13603. The contract specifies a delivery timeframe of 167 days after receipt of order, with a need ship date of March 1, 2027, and an original required delivery date of April 23, 2027. Delivery is set as FOB Origin, while both inspection and acceptance will occur at the destination, which is the DLA Distribution San Joaquin facility in Tracy, California. The procurement is subject to several technical and quality requirements, including DLA packaging requirements under RP001 and specific quality standards such as RQ001, RQ002, RQ011, and RQ017. Marking must comply with MIL-STD-129, and packaging must adhere to MIL-STD-2073-1E. Item Unique Identification is not required for this specific order. The solicitation was posted on September 2, 2026, with a response deadline of September 14, 2026, and falls under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIR CON
Solicitation # SPE8E8-26-T-5492
This contract, identified as SPE8E8-26-T-5492, is a solicitation by the Department of Defense via DLA Distribution San Joaquin for the procurement of 14 air conditioning filter elements. The required items are associated with NSN 4130-01-651-1506 and correspond to Airsan Corporation part numbers 906938 and N11AF-SS316L-F. The delivery is set for 167 days after receipt of order, with a required delivery date of April 23, 2027, and a need ship date of March 1, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Compliance with specific technical and quality requirements is mandatory, including DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. Inspection and acceptance will take place at the destination. The contract also notes that covered defense information potentially applies and requires the removal of government identification from any non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CIRCULATING
Solicitation # SPE8E7-26-T-3753
This contract is for the procurement of 486 circulating fans, identified by NSN 4140-01-306-8249 and part number 9012/4C630P from manufacturer Air King America, Inc. The agreement is issued by DLA Distribution San Joaquin under solicitation SPE8E7-26-T-3753 as a total small business set-aside. Delivery is required within 123 days, with a need ship date of June 29, 2026, and an original required delivery date of April 24, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Additionally, the contractor is instructed to avoid the use of plastics for wrapping, cushioning, or dunnage materials whenever possible. Inspection and acceptance will take place at the destination.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details