This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PARTS KIT, FLOOR, VEH

Closed

SPE7L3-26-T-015VFederal

Submission Closed06/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 321215

New

DIBBS

PARTS KIT, FLOOR, VEHICU

Solicitation # SPE7LX-27-U-0364

Solicitation SPE7LX-27-U-0364 is a total small business set-aside for the procurement of 119 vehicular floor parts kits (NSN 2510-01-540-5724) for the Defense Logistics Agency. The material must comply with Commercial Item Description A-A-60057 and adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. The contract is structured as a unilateral indefinite delivery contract with a delivery window of 87 days after the order is received and is shipped FOB Origin. Key compliance requirements include CMMC Level 2 certification and adherence to export controls under ITAR and EAR. Packaging and marking must follow MIL-STD-129 and MIL-STD-2073-1E, with specific prohibitions against the use of Class I ozone-depleting chemicals and hexavalent chromium. Invoicing is managed electronically through the Wide Area WorkFlow system. The solicitation emphasizes domestic material restrictions, including the Buy American Act and the Berry Amendment, and requires destination inspection per FAR 52.246-1.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0148

Solicitation SPE8ED-27-T-0148 is a procurement request by the Defense Logistics Agency for one unit of a revetment panel, identified by NSN 5450017033763. The item must be produced in accordance with reference drawing 5B5M3 11B5190711, revision dated August 4, 2016. Delivery is required within five days after receipt of order, with shipping terms set as FOB Origin. The designated delivery point is the 0541 CS BN CO A Composite at Fort Riley, Kansas. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled per MIL-STD-129 and MIL-STD-130N, with palletization following RP001 requirements. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, human trafficking, and the Buy American Act. This is not a small business set-aside, and all quotes must be submitted through the DLA Internet Bid Board System.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Crossarm/Brace IDIQ for UGP, RMR, DSW.The Western Area Power Administration, under the Department of Energy, is forecasting an Indefinite Delivery, Indefinite Quantity contract for the procurement of crossarms and braces to support UGP, RMR, and DSW operations. This requirement is categorized under NAICS code 321215 and is designated as a small business set-aside. The current incumbent for this contract is Hughes Brothers Inc. Interested parties can coordinate with the Small Business Program Managers for further details regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

WOOD CROSSARMS AND BRACES FOR WESTERN AREA POWER ADMINISTRATION, ROCKY MOUNTAIN REGION.The Western Area Power Administration, under the Department of Energy, has issued a forecast for the procurement of wood crossarms and braces to support the Rocky Mountain Region. This requirement is specifically designated as a small business set-aside under NAICS code 321215, with the primary place of performance located in Nebraska. The current incumbent contractor for these supplies is Hughes Brothers Inc. Interested parties may coordinate with the Small Business Program Managers for further information regarding this upcoming acquisition.

Western Area Power Administration

POSTED

DEADLINE

FLOOR, BODY, VEHICULAR

Solicitation # SPE7L3-27-T-1028

Solicitation SPE7L3-27-T-1028 is a fixed-price request for quotations issued by the Defense Logistics Agency Weapons Support for the procurement of 58 kits of vehicular body floors, identified by NSN 2510-01-525-6325. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses certified by the Small Business Administration. Material must comply with Commercial Item Description A-A-60057, and the contractor is prohibited from using Class I ozone-depleting chemicals or mercury compounds. Delivery is required within 397 days, with a need ship date of June 4, 2027, and a final required delivery date of October 31, 2027, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates First Article Testing (FAT) for one unit, with the test report due within 90 calendar days of the contract date and a 14-day prior notification requirement for shipment. Quality standards require a manufacturer's inspection system compliant with ISO 9001:2015. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and Special Packaging Instruction AM15256325. Additionally, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Intent to sole source Composite Laminated Beams

Solicitation # CD-65-0031

The U.S. Navy’s Naval Surface Warfare Center Carderock is issuing a sole source intent for Composite Laminated Beams under solicitation number CD-65-0031, with a posted date of June 11, 2026. This action is based on a justified determination that only one supplier can meet the specific technical and performance requirements outlined in the minimum specifications, and no other product or vendor can fulfill the operational needs of the Department of Defense. The North American Industry Classification System code 321215 applies, indicating the procurement is for wood product manufacturing, specifically focused on engineered composite laminated beams designed for structural applications in naval infrastructure and equipment. All inquiries and communications must be directed to David Crouch, the primary point of contact at the office located in Bethesda, Maryland, with contact details provided via email and phone. The procurement is categorized as a special notice and is not subject to any set aside provisions, making it open to sole source award without competitive bidding. The place of performance is not specified, but the contract will likely involve delivery to defense facilities under Navy control. The intent to sole source underscores the proprietary nature of the required composite laminated beams, which are tailored to stringent military standards and cannot be replicated by alternative products on the market.

Nswc Carderock

POSTED

5 months ago

DEADLINE

N/A

AI Contract Overview

The solicitation seeks a quantity of 122 units of the Parts Kit, Floor, Vehicle, identified by NSN 2510015405724, to be delivered to DLA Distribution at location W1A8 within 176 calendar days after award. This is a total small business set-aside under FAR 19.5, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 321215 indicating manufacturing in the wood product industry, aligned with the item’s specifications. The procurement is conducted electronically through an RFQ issued under solicitation number SPE7L326T015V, with no hard copies available; all responses must be submitted digitally and timely to be considered. The contracting office is DLA Land and Maritime, based in Columbus, Ohio, and interested parties are directed to access the full solicitation via the provided SAM.gov link and DIBBS website to obtain digitized drawings, military specifications, and standards. Questions must be directed to the designated point of contact via email, with further instructions specifying that the buyer’s details are located in Block 5 of the official solicitation document.

General Info

Procurement of 122 vehicle floor parts kits by DLA, small business set-aside, electronic quotes.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

NAICS

321215 - Engineered Wood Member Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE7L3-26-T-015V

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 17

Combined Synopsis

Type ChangedMay 28

Combined Synopsis → Solicitation

Response DeadlineJun 2

Deadline has passed

Submission Closed

06/02/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Office AddressUSA

Contacts

Matthew Curry

contact@example.gov

+1 (555) 000-0000

Full Description

PARTS KIT,FLOOR,VEH
FLOOR,BODY,VEHICULAR
MATERIAL SHALL MEET THE REQUIREMENTS OF COMMERCIAL ITEM DESCRIPTION
(CID) A-A-60057.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
FULL AND OPEN COMPETITION APPLY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations
SPE7L3-26-T-015V
SECTION B
(ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2510-01-540-5724 Quantity: 122 KT Purchase Request: 7016707980QTY: 122 Delivery: 176 days ADO